Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.4 CrAccepted-AOC DAKSHIN GOBINDAPUR SIBARAMNAGAR SUTAHATA PURBA MEDINIPUR PIN 721635 | HALDIA | PURBA MEDINIPUR | WEST BENGAL | 721635 | 1 | Accepted-AOC This authority has decided to issue the Work Order to all L1 bidder. | |
| 2 | 1₹1.4 CrAccepted-AOC BRAJALALCHAK DAKSHINCHAK PURBA MEDINIPUR PIN 721654 | HALDIA | PURBA MEDINIPUR | WEST BENGAL | 721654 | 1 | Accepted-AOC This authority has decided to issue the Work Order to all L1 bidder. | |
| 3 | 2₹1.4 Cr+₹3.0 L (2.19%)Rejected-Finance | 2 | Rejected-Finance Higher rate offered than L1 Bidder. |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
24 Sept 2024, 6:55 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Administrator, Haldia Municipality
Haldia Municipality, City Center, Debhog, Haldia, Purba Medinipur, W.B.
E-Quotation for maintenance of water supply pipeline with in different wards ( 1 - 29 ) under Haldia Municipality.
2024_MAD_742398_1
WBMAD/ULB/HM/3725/NIT-1723
Open Tender
CIVIL WORKS
Item Rate
365 days
Haldia Municipality
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹50,000
20 Jan 2025
2 Sept 2024
27 Sept 2024
2 Sept 2024
24 Sept 2024
2 Sept 2024
Amount
Earthwork in excavation of trenches on C.I.pipe line, A.C pipe line and G.I. pipeline and apartment structure in any kind of soil including mixed soil morrum and semi liquid or slurry earth by iron pan bucket but excluding laterite or sand, stone chips according to with shape and level as per pipe dia including stacking excavated soil within a lead of 75 mtr as directed and trimming the bottom and side of the trenches as well as dressing ramming as required depth upto 3 m below G.L
Hire and labour charges for shuttering with centering and necessary staging upto 4 mtr. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fittings, fixing and striking out after completion of works. ( upto roof of ground floor) a) 25 mm to 30 mm thick wooden shuttering as per direction of the Engineer - In - Charge
Pumping out water by Jet pumping or other suitable power pump from pipeline trenches or stagnant water on the surface and the working place.
Trial pit for searching of A.C, C.I. or G.I. pipeline
Opening and over hauling washing bolts nuts and other or different dia CIDF valves including smoothening the movements of gates by greasing and asking the valves in operation condition fitting fixing the same with necessary bolts, nuts , washers etc. complete in running condition with removal of RCC execution and replacing the same but excluding the rewatering including the cost of lubricant / grease as requirec complete. Nuts or bolts to be supplied by the contractor. a) Upto 250 mm dia
Making Flange Joints or C.I. pipes specials and valves including to supplying necessary nuts and bolts rubber insertion etc all complete and should be approved by the E.I.C
a) 80 mm dia
b) 150 mm dia
c) 200 mm dia
c) 250 mm dia
Labour charges for repairing the leaks through socket of 150 mm to 350 mm C.I. Tyton / CIDF pipes and CIDF valves by lead Jts including refixing the same with new pipes and specials if required and bailing out water from pipeline. Rubber gasket, C.I valves , specials, CI pipes if required for the work will be supplied by the agency including yarn and other materials.
ii) 300 mm f
iii) 250 mm f
iv) 200 mm f
Cutting of C.I. pipes where necessary with compressed air operated or mechanical abbressive including rendering surface and the out surface smooth so as to make it suitable for rubber gasket. Jointing measurement will be made along pheripherical outting.
a) 150 mm dia
b) 200 mm dia
c) 250 mm dia
d) 300 mm dia
Restoration of laterite / morrum brick road ( WBM) to the original condition with new - old materials restoring by supplying at least 25 % new materials restoring, edging etc. over a layer of B.F.S complete as per direction ( inclussive , bricks on edge pavement )
Picking up existing WBM road collecting to picking up materials screening and stacking screened materials and rubbish seperately removing rubbish as directed. i) Jhama metal / laterite metal surface(upto any depth)
Barriecading either side or the trenches with 75 mm strong bamboo pile 5 mtr long 2 mtr c/c tied with 2 nos bamboo fitted with nails including supplying 1 No sign board lettering with " Road closed men at work" and 2 nos red lamps at night including cost of all complete (Payment will be made on the length of Barriecading )
Dismantling all types of masonary excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m. In ground floor including roof. .
a) Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m In ground floor including roof.
b) Dismantling R.C.floor , roof , beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. In ground floor including roof
c)Brick work with 1st classbricks in Cement mortar (1 : 6) a) In foundation and plinth
Ordinary Cement concrete ( mix 1:2:4) with graded stone chips ( 20 mm nominal size ) excluding shuttering and reinforcement , if any, in ground floor as per IS codes. a) Pakur Variety
Operation ( opening and closing ) of different dia ( 80 mm to 400 mm ) butterfly valve, sluice valve at different location track manually including removal of RCC slab and cost of hire charges of necessary tools plants.
a) 80 to 200 mm dia
b) 250 to 500 mm dia
Cutting A.C. pipe from 80 mm to 100 mm dia as necessary with mechanical abbressive of other device with out damaging including grounding the end surface smooth as to make if suitable for detachable joints as per direction of E.I.C
Labour charges for repairing of leakage of 80 mm dia to 100 mm dia AC pipe with supply as per I.S. specification and direction of E.I.C cutting the pipe if required and refitting the same with new pipe s and detechable joints.
Supplying C.I. saddle piece of approved quality
Supply of G.I. pipes of TATA make
a) 15 mm dia medium quality
b) 20 mm dia medium quality
c) 25 mm dia medium quality
Supplying different dia D.T Joints approved quality as per direction of E.I.C
a) 80 mm to 100 mm dia
b) Nut with bolts each
c) Supplying different dia rubber ring for D.T Joints 80 mm to 100 mm dia
Earth work n filling in foundation trenches or plinth with good earth. in layers not exceeding 150 mm. including watering and raming etc. layer by layer complete. (Payment to be made on basis of measurement of fiinished quantity of work ) a) With earth obtained from excavation of foundation.
Disinfectang all classes all types of pipeline ( i.e C.I, G.I. or A.C ) with chlorinated water at least 5 Kg / litre including supplying of chlorinate or bleaching powdered as per direction of E.I.C.
a) 80 mm dia
b) 100 mm dia
c) 150 mm dia to 300 mm dia
Labour for fitting and fixing G.I. pipes for under ground work including cost of jointing materials, cutting pipes, making threads etc. complete in all respect including cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting of G.I. pipes and specials with bituminous paint. (Payment will be made on the centre line measurement of the total pipeline including specials)
i) 15 mm dia
ii) 20 mm dia
iii) 25 mm dia
Supply of G.I. Socket with ISI Mark
Supply of G.I. nipples standard 50mm long
Supplying Brass ferrule for connecting of mains of approved make supplied fitted & fixed
Drilling and tapping C.I. mains
Supplying fitting and fixing screwed bib / stop cock with round type handle of approved make and tested to 21 kg/ Sqm
a) Spray Painted over alloy iron with brass spindle i) 20 mm
Supplying Iron bib cock
Supplying of union
Supplying G.I Plain equal
iii) 25 mm
Supplying G.I. reducing socket i) 20 mm x 15 mm
Dismantling existing ferrule including refixing the same after cleaning
Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I marking with fittings ( tested to 21 kg per sq.cm )
Supplying G.I. Bend
Supplying fitting and fixing of different dia C.I. Tyton pipe as per IS Specification & approved by E.I.C ( 6 kg pressure should be maintained )
a) 200 mm dia
b) 150 mm dia
Supplying fitting and fixing of different bolted coller with mechanical joint
a) 200 mm dia
b) 150 mm dia
Supplying fitting & fixing different dia Tyton rubber gasket
a) 250 mm dia
b) 200 mm dia
c) 150 mm dia
Dis - connection of individual water supply line
i) 25 mm dia
ii) 20 mm dia
iii) 15 mm dia
Re - Connection of individual water supply line
i) 20 mm dia
i) 15 mm dia
Construction of R.C Street stand post with platform including supply of Rly type tap along with all necessary fitting & fixing complete as per direction of E.I.C
Sluice valve chamber with C.I. heavy cover with locking arrangement, ( weight not less than 25 kg ) ( Size of chamber 450 mm x 600 mm inside upto 900 mm depth ) 250 mm thick cement brick walls ( 6 : 1 ), 150 mm thick cement concrete ( 6:3:1) bed with stone chips, 20 mm thick cement plaster ( 6 : 1) , 150 mm thick cement concrete ( 6:3:1) bed with stone chips, 20 mm thick cement plaster ( 6:1) for inside wall and 15 mm thick cement plaster ( 4:1) for outer walls including rounding corners.
Labour charges for repairing of Leakage HDPE pipes including materials
a) 160 mm dia
b) 110 mm dia
c) 90 mm dia
d) 200 mm dia
e) 300 mm dia
C.I.sluice valve with flanged ends drilled to as er I.S. 1358/62 and having all cast iron components as per I.S. 780/71 solid forged bronze inside screw spindle having ultimate tensile strength not less than 4.72 M.T per sq.cm. Spindle, nut, valve and seat faces of hard wear resisting, manufactured from best quality gunmetal conforming to I.S. 780 / 71, painted black all over with asphalt base paint tested to 21 kg ( hydraulic pressure ) per sq. cm, valve opening to anticlockwise direction, fitted and fixed complete.
a) 200 mm dia
b) 150 mm dia
c) 100 mm dia
Supplying, fitting and fixing C.I. tail pieces in pair conforming to I.S. specifications.
a) 200 mm dia
b) 150 mm dia
c) 100 mm dia
d) 80 mm dia
Supply of different dia HDPE Pipe
a) 250 mm dia
b) 200 mm dia
c) 160 mm dia
d) 140 mm dia
e) 125 mm dia
f) 110 mm dia
g) 90 mm dia
Supplying fitting and fixing water meter (capstan make ) including cutting of trences etc along with all fitings (Before supply the materials should be checked by the E.I.C )
a) 100 mm dia
b) 150 mm dia
c) 200 mm dia
d) 250 mm dia
e) 300 mm dia
f) 350 mm dia
Supplying fitting & fixing air valve complete set for different dia of pipe along with all fitting as per I.S mark before installation materials should be approved by the E.I.C
Repair air valve including removing the same from the existing line and replace the same at same position as per direction of E.I.C ( All necessary fitting if required should be supplied by the agency.)
Supply of P.V.C Pipe ( ASTMD - 1785 )
i) 15 mm dia
ii) 20 mm dia
iii) 25 mm dia
Washing and cleaning of HDPE pipeline
i) 90 mm dia
ii) 110 mm dia
iii) 160 mm dia
iv) 200 mm dia
v) 250 mm dia
SUSIL KUMAR HAZRA (BID ID -5603382)
SOUMYA ENTERPRISE (BID ID -5604933)
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .