Renovation and Interior Fit-Out Works of SIDBI Branch Office, Faridabad

Grand Total 49,16,026.00

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by

applying cement slurry mixed with water proofing cement compound consisting of

applying : a) First layer of slurry of cement @ 0.488 kg /sqm mixed with water proofing

cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b)

Second layer of slurry of cement @ 0.242 kg/ sqm mixed with water proofing cement

compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with

water curing for 48 hours. The rate includes preparation of surface, treatment and sealing

of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Digitally signed by AMIT

DSR-2023 Ref. RATE (DSR

DESCRIPTION UNIT QTY AMOUNT MARKET RATE AMOUNT

AAC BLOCK FILLING: Providing and Laying of AAC Block Filling in the Slab Sunk or Raised

Areas as a Back fill or platform. Laying should be done in layers with pounding done at

every level to ensure a proper cavity free installation without disturbing any existing services

in the area. Cost to also include haunching for plumbing pipes.

3 PAVING AND WET WORKS

TILE DADO :- Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:

15622 (thickness to be specified by the manufacturer), of approved make, in all colours,

shades except burgundy, bottle green, black of any size as approved by Engineer-in-

Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1

cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including

pointing in white cement mixed with pigment of matching shade complete.

CERAMIC TILE FLOORING :- Providing and laying rectified Glazed Ceramic floor tiles of size

300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality

conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory,

Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand),

jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white

cement and matching pigments etc., complete.

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70

kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per

kg), including filling / grouting and finishing complete as per direction of Engineer-in-

VITRIFIED TILES: Providing and laying vitrified floor and wall tiles in different sizes (thickness to

be specified by the manufacturer) with water absorption less than 0.08% and conforming to

IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar

11.41A 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including

grouting the joints with white cement and matching pigments etc.,

4 PARTITIONS AND WALL CLADDING

PANELLING- Providing and fixing wall panelling using 12mm thick plywood fixed on one side

of aluminium frame of size 50mm x 25mm x 1.5mm, as per approved sample and

4.1 MR architectural drawings. Aluminium frame to be fixed to wall, floor, and RCC ceiling using SQM 12.00 2,414.28 28,971.37

suitable fasteners. Work to include all necessary materials, labour, tools, fasteners, adhesive,

screws, supports, and complete in all respects.

LAMINATE CLADDING- P/F 1mm thick laminate including 4 mm thick MDF, on an existing

Plywood surface.

Providing and fixing partition using 12mm thick plywood fixed on both sides on aluminium

frame of size 50mm x 25mm x 1.5mm as per approved sample and architectural drawings.

Aluminium frame to be fixed to wall, floor and RCC ceiling using approved fasteners

including cutting, jointing, finishing, screws, adhesive, etc., complete in all respects.

Providing and fixing 12mm thick Toughened Glass partition with all required ss hardware &

Digitally signed by AMIT

DSR-2023 Ref. RATE (DSR

DESCRIPTION UNIT QTY AMOUNT MARKET RATE AMOUNT

Providing and fixing partition in cafeteria comprising the following:

- Outer side: Metro profile sheet fixed on G.I. framework.

4.5 MR - Inner side: Bison board partition fixed on same G.I. framework. SQM 35.00 3,850.00 1,34,750.00

- Complete with necessary sections, fasteners, cutting, and finishing as per site requirement.

GYPBOARD CEILING :- Providing and fixing false ceiling at all height including providing and

fixing of frame work made of special sections, power pressed from M.S. sheets and

galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and

37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5

mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of

5.1 12.45 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle

hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200

mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm

with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,

shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting

clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing

perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long.

Including jointing and finishing to a flush finish of tapered and square edges of the board

with recommended jointing compound , jointing tapes , finishing with jointing compound in

3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for

board, all as per manufacturer's specification and also including the cost of making

openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels

suitably fixed, all complete as per drawings, specification and direction of the Engineer in

Charge but excluding the cost of painting with :

a) 12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I SQM 40.00 1,355.80 54,232.00

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of

approved texture, design and pattern. The tiles should have Humidity Resistance (RH)

of 99%, Light Reflectance ≥ 85%,Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire

Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-

Grid of hot dipped all round galvanized iron section of 0.33 mm thick level suspended on

interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick5x32mm

of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm

to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel

item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm

5.4 26.27 diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size

85x25x2 mm, spaced at 1200 mmcentre to centre along main ‘T’. The system should rest on

periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm

made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450

mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all

T-sections used in false ceiling support system shall be pre-painted with polyester baked

paint, for all heights. The work shall be carried out as per specifications, drawings and as per

directions of the engineer-in-charge.

26.27.2 With 15 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.5) SQM 60 2671.2 160272

Digitally signed by AMIT

DSR-2023 Ref. RATE (DSR

DESCRIPTION UNIT QTY AMOUNT MARKET RATE AMOUNT

6 DOORS/ WINDOWS

DOOR FRAMES- Providing wood work in frames of doors, windows, clerestory windows and

other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners

6.1 9.1 of required dia & length ( hold fast lugs or dash fastener shall be paid for

9.1.1 Second class teak wood CUM 0.13 142949.7 17868.7125

FLUSH DOOR:- Providing and fixing ISI marked flush door shutters conforming to IS : 2202

(Part I) non-decorative type, core of block board construction with frame of 1st class hard

wood and well matched commercial 3 ply veneering with vertical grains or cross bands

and face veneers on both faces of shutters :

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws SQM 2.00 2,392.65 4,785.30

Extra for Providing and fixing flush doors with decorative veneering instead of non

decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)

9.22.1 On one side only SQM 4.00 478.00 1,912.00

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all

edges of flush door shutters (over all area of door shutter to be measured)

Providing and fixing wooden moulded beading to door and window frames with iron

screws, plugs and priming coat on unexposed surface etc. complete:

9.40.1 2nd class teak wood

MORTICE LOCK AND LEVER HANDLES- Providing and installing Tubular Handle TH 123 with

6.6 MR Roses & Escutcheon in SS packaged with Mortice lockset 55mm backset, 20 SS forend, SS EACH 2.00 3,415.03 6,830.07

strike plate and EP Cylinder for all flush doors.

TOWER BOLTS:- Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic

6.7 9.97 coating not less than gradeAC 10 as per IS : 1868 ), transparent or dyed to required colour

or shade, complete:

DOOR STOPPER:- Providing and fixing bright finished brass hanging type floor door stopper

with necessary screws, etc. complete.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm

diameter bolts, nuts and wooden plugs and embedding in cement concrete block

30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm

6.10 MR Door Closer:- Providing and Fixing Door Closer For Entry Door EACH 2.00 2250 4500

Providing and Fixing ESDH 22x450 mm D-type Handle Material : Stainless Steel. Finish : Satin

6.11 MR Stainless Steel (SSS). of approved make and model all complete as per the direction of Each 5.00 4250 21250

Engineer-in-charge.

Providing and Fixing EMB 245 SS Mortise Lock Body SB/TB for door thickness 25-50 mm for of

6.12 MR approved make and model all complete as per the direction of Engineer-in-charge. Each 5.00 750 3750

Digitally signed by AMIT

DSR-2023 Ref. RATE (DSR

DESCRIPTION UNIT QTY AMOUNT MARKET RATE AMOUNT

Providing and Fixing FH-943 Double cylender Floor Spring- with Closing Force EN 3 with

Maximum door weight 105 Kg. Maximum door width 950mm.Closing speed : 130° Final

closing speed : 15-0°. Hold Open (standard): 90° hold open. Weight of floor spring approx :

6.13 MR 6kg, 5,00,000 cycles Tested with 5 Years Warranty against manufacturing defect. CE Each 5.00 8500 42500

certified for wooden doors all complete as per the direction of Engineer-in-charge.

Providing and Fixing EFS ACC-001,002 top and Bottom Strap of approved make and

model all complete as per the direction of Engineer-in-charge.

Providing and Fixing EDL 024 Dead lock Back set- 50 mm with Key Hole of approved make

6.15 MR and model all complete as per the direction of Engineer-in-charge. Each 5.00 1650 8250

GLASS FILMS: Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special

CRYSTAL-effect film to reproduce Sand-blasting effect on glass with customised designs,

thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8)with adhesive having minimum

tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of

6.16 MR installation should be 4 pounds/inch (0.7 kg/cm) on Acrylic, Glass Polycarbonate: MCS SQM 10 1950 19500

warranty of 3yrs (if exposed to direct sunlight) to 15yrs (indoors) must be endorsed

by 3M India Limited Architectural Market Department. Contractors payment wouldn't be

released until & unless he/she produces orginal warranty certificate from the manufacturer.

7 FINISHES & MISCELLANEOUS

Wall painting with acrylic emulsion paint, having VOC content less that 50 grams / litre, of

7.1 13.82 approved brand and manufacture, including appliying additional coats wherever required,

to achive even shade and colour.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to

prepare the surface

Applying priming coats with primer of approved brand and manufacture, having low VOC

(Volatile Organic Compound ) content.

With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC

content less than 50 grams/ litre

LAMINATED STORAGE CABINET FOR GENERAL STORAGE- Out of 19mm BWP Ply Board finished

using 1mm thick Laminate. The storage to be complete with all hinges, drawer glides and

hardware from approved make. All internal surfaces to be completed using balancing

laminate. Including brass D-type handles for shutters and recessed type handles for drawers

or as approved. Storage to be of all heights as per design. Storage shutters to be made in

solid laminate/ glass as per design and drawings.

Providing & fixing 12mm Thick. 100% Acrylic solid surface of approved make and colour

using approved Adhesive to 12 mm thk. Waterproof Plywood of approved brand as per

7.6 M.R. shape, pattern & details given in the drawing. The rate includes providing & fixing beading, SQM 1.50 12,000.00 18,000.00

cutting, scaffolding, nails, all materials, labour, lead, lifts, HOM etc., complete.-for Lift

Cladding. (The make, Shade, pattern etc., to be approved by Architect).

Providing & fixing of 3mm thcik vinyl flooring as per sample approved cost including

wastage and fixing charges completel

Digitally signed by AMIT

DSR-2023 Ref. RATE (DSR

DESCRIPTION UNIT QTY AMOUNT MARKET RATE AMOUNT

7.8 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and

prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and

similar locations of required size, approved shade, colour and texture laid over 20 mm thick

8.2 base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,

mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and

polishing to edges to give high gloss finish etc. complete at all levels.

8.2.2 Granite stone slab colour black, Cherry/Ruby red

8.2.2.2 Area of slab over 0.50 sqm sq.m 3 5,136.30 15,408.90

7.9 8.5 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen

platform, vanity counter and similar location in marble/ Granite/ stone work, including

necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges

SUB TOTAL OF FINISHES 4,92,083.71 8,86,383.80

Digitally signed by AMIT

SUB HEAD A: SANITARY FIXTURES & FITTINGS

SL. NO. DSR - DESCRIPTION OF ITEMS UNIT Qty DSR Rate (Rs.) NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

Supply, installation, testing and commissioning of glazed vitreous china single trap syphonic

pattern having back inlet, supporting chair, wall hung water closet complete with all

internal fittings/ accessories and CP brass flush bend (European type) water closet with seat

1 MR and lid, with C.P. brass hinges and rubber buffers, adapter, rubber joints fixed to W.C., C.P.

brass screwed washers including cutting and making good the walls and floors wherever

required and HDPE WC pan connector including jointing with white cement complete in all

Wall hung W.C. pan (White colour)with white plastic seat & lid "Thermoset moulded (

bakelite ) IS 2548 Part I

Supply, installation, testing and commissioning of concealed cistern including flush plate

2 MR and all internal fittings/ accessories including cutting and making good the walls and floors Each 2.00 9,500.00 19,000.00

wherever required complete in all respects.

Supply, installation, testing and commissioning of glazed vitreous china wash basin with R.S.

or C.I. brackets painted white, 32mm C.P. brass waste of standard pattern , C.P brass wall

flange 32 mm dia. C.P. brass bottle trap and union 32 mm dia C.P. pipes to wall flange.

complete including cutting and making good the walls wherever required.

3.1 Table Top wash basin Each 2.00 8,250.00 16,500.00

Supply, installation, testing and commissioning of 15mm C.P. brass single hole wash basin

mixer without popup waste system with 450mm long copper pipes and brass nut

5 MR Providing & fixing toilet paper holding including cutting and making good the walls. Each 2.00 1,579.64 3,159.27

Providing & fixing Horizontal liquid soap dispenser with stainless steel lid and brackets fixed

to wooden cleats with C.P. brass screws. (Model No.ES43)

7 MR Providing & fixing C.P. brass coat hooks fixed on toilet door with C.P. brass screws Each 2.00 688.84 1,377.69

Providing & fixing beveled edge mirror 5.5mm thick of superior quality plate glass

8 MR complete with 6mm thick marine ply sheet ground fixed to wooden cleats with CP brass Sqm 1.50 2,836.09 4,254.14

screws and washerswith 40 mm wide teak wood frame as per design including polishing

Providing & fixing Hand Shower (Health Faucet) with 8mm dia, 1M long PVC tube and wall

hook CP brass wall flange

Providing & fixing, testing and commissioning of storage type electric water heater with

automatic thermostatic control electric element, pressure release valve, brackets fixed to

expansion fasteners with M.S. nuts and bolts all complete including cutting and making

good the walls wherever required.

05 litres capacity (Horizontal /Vertical type1.5 kw electrical load). Each 1.00 8,500.00 8,500.00

11 MR Providing & fixing 15 mm dia C.P. brass bib cock with C.P. wall flange of approved quality. Each 1.00 1,605.43 1,605.43

Providing and fixing of stainless steel finish Paper Towel Dispenser having capacity of 300-

350 paper towels fixed to wooden cleats with C.P. brass screws

13 MR Providing and fixing of Urinal With Automatc Flushing Cistern Each 1.00 24,000.00 24,000.00

14 MR Providing and fixing of Bottale Trap Each 2.00 4,465.00 8,930.00

15 MR Providing and fixing of Towel Rod Each 2.00 3,635.00 7,270.00

Providing and fixing C.P. bass angle valve for basin mixer and geyser points of approved

quality conforming to I.S:8931 a) 15 mm nominal bore.

Digitally signed by AMIT

SL. NO. DSR - DESCRIPTION OF ITEMS UNIT Qty DSR Rate (Rs.) NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

Providing and fixing unplasticised P.V.C connection pipe with PTMT Nuts coller and bush of

approved quality and colour.

18.74.2 15mm nominal bore with 45cm length Each 4.00 121.90 487.60

Supply, Installation, Testing and Commisioning of SINGLE LEVER

CONCEALED BASIN MIXER (WALL MOUNTED) WITH SPOUT

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per

IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting

3.0 17.10.2. Kitchen sink without drain board

5 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.waste fittings complete.

6 17.28.2 Flexible pipe

Providing and fixing rectangular high density polyethylene water storage loft tank with

cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-

charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The

base support i/c fittings & fixtures for tank shall be paid separately.

TOTAL CARRIED OVER TO SUMMARY 27,082.00 1,68,448.92

Digitally signed by AMIT

SUB HEAD B: WATER SUPPLY

SL. NO. DSR /NS DESCRIPTION OF ITEMS UNIT Qty DSR Rate (Rs.) NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for

hot & cold water supply including all (CPVC) plain & brass threaded fittings including fixing

1 18.7 the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one

step CPVC solvent cement and testing of joints complete as per direction of engineer in

Internal Work - Exposed on Wall

18.7.4 32 mm nominal outer dia pipes. Metre 15.00 518.75 7,781.25

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for

hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the

pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step

2 18.8 CPVC solvent cement and the cost of cutting chases and making good the the same

including testing of joints complete as per direction of engineer in charge.

Concealed work including cutting chases and making good the walls etc.

18.8.2 20 mm nominal outer dia pipes. Metre 40.00 537.60 21,504.00

18.8.3 25 mm nominal dia Pipes Metre 20.00 627.25 12,545.00

18.8.4 32 mm nominal dia Pipes Metre 10.00 736.30 7,363.00

3 18.16 Providing and fixing brass stop cock of approved quality complete.

18.16.1 15 mm nominal bore Each 0.00 353.25 0.00

18.16.2 20 mm nominal bore Each 2.00 379.20 758.40

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed

Sub-Total of Water Supply Installation, Separate for Scheduled & Non-Scheduled Items 51,331.55 0.00

Digitally signed by AMIT

SUB HEAD C: INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES)

DSR Rate NS Rate DSR Amount

DSR /NS SR NO DESCRIPTION OF ITEMS UNIT Qty NS Amount (Rs)

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste,

and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and

fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC

connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at

wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor

& basement ceiling / external work etc. including chase cutting as required, excavation and back

filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under

floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone

20 aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work,

MR breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The

rubber ring shall confirm to IS:5382.

The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm

slotted angle. The cost will include all support arrangements. The work includes commissioning of all

pipes lines as per drawings and specifications and as directed by engg-in-charge at site.

a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 30.00 536.00 16,080.00

b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 30.00 416.00 12,480.00

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6 Kg/ Sqcm

rating with fitting for waste pipe from fixtures to floor trap including reduces, enlarger, socket,

couplers, bends, tees etc including fixing at wall/ ceiling level supported by clamp & hangers etc.

cutting holes in wall/ floors/ slabs and making good the same with cement concrete 1:2:4 complete

Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete in all 0.00

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser EACH 4 536.00 2,144.00

MR 23 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. EACH

MR 24 Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover with EACH 4 1001.00 4,004.00

Sub-Total of Drainage Installation, Separate for Scheduled & Non-Scheduled Items 0.00 38,257.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC

A.1 conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5

sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point (without independent

switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /

A.2 recessed PVC conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper

conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core

A.3 1.12 cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC Metre 40 334.00 13,360.00

insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 12 122.00 1,464.00

1.24.5 6 pin 15/16 amp socket outlet Each 20 197.00 3,940.00

A.6 1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box

excluding modular plate as required.

1.27 Supplying and fixing following size/module, GI box along with Modular base & cover plate on

existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC

insulated copper conductor, single core cable in surface/ recessed medium class PVC

conduit as required

Digitally signed by AMIT

DSR NO DESCRIPTION TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 80 334.00 26,720.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 20 439.00 8,780.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 20 1005.00 20,100.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 0 1365.00 0.00

Supplying and making end termination with brass compression gland and aluminium lugs for

9.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV

grade as required.

MR Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554 Aluminium

Conductor Cables :

C.2 Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor armoured

cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively & ISI marked.

(e) 3.5 C x 35 Sqmm XLPE cable RM 50 850.00 42,500.00

Supply of following sizes of copper cables -PVC sheathed PVC/XLPE insulated Copper

C.3 MR conductor armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1

respectively & ISI marked.

(a) 4 C x 16 Sqmm XLPE copper cable RM 10 1850.00 18,500.00

(b) 4 C x 25 Sqmm XLPE copper cable RM 0 2140.00 0.00

D.1 2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as

D.2 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit

2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar,

neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing

etc. as required. (But without MCB/ RCCB/ Isolator)

MR 12 way (4 + 36), Double door Each 1 9081.00 9,081.00

Digitally signed by AMIT

DSR NO DESCRIPTION TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

2.14 Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,

residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes

in the existing MCB DB complete with connections, testing and commissioning etc. as

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

Supplying and fixing following modular switch / socket on the existing modular plate & switch

E.7 box including connections but excluding modular plate etc. as required.

1.24.7 TV socket outlet Set 2 148.00 296.00

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

E.11 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the Meter 50 47.00 2,350.00

exisitng surface/recessed steel/ PVC conduit as required

Supplying and fixing of following sizes medium class PVC conduit aong with accessories in

E.1 1.21 surface/ recess including cutting the wall and making good the same incase of recessed

2 conduit as required

E.1 Supplying and Installation of following size perforated of painting with powder coating M.S.

3 cable trays of perforation of not more than 17.5% in convinient sections, joined with

connectors suspended from the cieleing with MS suspenders including bolts and nuts painting

suspenders etc as required

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 10 1137.00 11,370.00

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and

F.1 5.6 providing masonry enclosure with cover plate having locking arrangement and watering SET 1 13838.00 13,838.00

pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

F.2 5.14 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as

F.3 5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. MTR 15 70.00 1,050.00

Total of Electrical items 313716 70081

Digitally signed by AMIT

1.0 VRF/VRV OUTDOOR UNIT Unit Rate Total Qty DSR Amount

Ref. No. Amount

Supply, Installation, Testing & Commissioning of Modular type Variable Refrigerant Flow/Variable

Refrigerant Volume air cooled Outdoor units suitable for cooling/heating having 100% hermetically

sealed inverter type twin Rotary/Scroll Compressor(s),minimum two compressors (with individual

separate PCB) for above 14HP modules, microprocessor based

Controller, top discharge type condensing unit(s), with R-410-A Refrigerant or equivalent, vibration

Isolators with suitable foundation etc. complete as required. To have better efficiency condenser fan

shall be capable to operate at different speed with respect to load. The unit shall deliver the rated

capacity and in confirmation as per IS 18728:2024 and CPWD Specifications and work even at 50°C

ambient temperature without tripping.

The system shall be able to deliver 100% of the rated capacity upto 39 Degree Celcius.The unit shall be

suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply and BMS compatible. The unit shall be

filled with first charge of the refrigerant and ready for use as required. The condenser should be coated

with a hydrophilic film to prevent water accumulation on the surface of the heat exchanger, enhance

water dispersion, and reduce the risk of degradation, thereby improving overall performance and

durability. The Indian Seasonal Energy Efficiency Ratio (ISEER) of the unit shall be as per Energy

Conservation and Sustainable Building Code (ECSBC) 2024 as below and complete as per CPWD

specification, connections, interconnections etc. as required. (For capacity <40 kWr ISEER 7.4, Capacity

>40 and <70 ISEER 7.5, Capacity > 70 ISEER 7.6 for Super ECSBC Building

2.0 INDOOR UNIT

Supply, Installation, Testing and Commissioning of following minimum capacity 4 way Cassette Type

Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low

noise fan / dynamically balanced blower, multispeed motor, coil section with DX Copper coil,

electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration Isolation,

7.4 Corded remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply,

complete, as required. The Indoor units must shut down upon receiving a singal from the BMS

System/Fire Signals. The system shall be capable to adjust air flow as per room requirement in auto

mode. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19

Degree C WB temperature. (Make will be same as of Outdoor)

4-Way Cassette type

3.0 REFRIGERANT PIPING

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of

following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with

fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories,

insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular

sleeves sections of 19 mm thick insulation as given below for Suction and Liquid lines, all accessories as

per specifications etc. as required :

Digitally signed by AMIT

1.0 VRF/VRV OUTDOOR UNIT Unit Rate Total Qty DSR Amount

Ref. No. Amount

3.2 7.14.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation Rmt 346.0 80.00 27680

3.3 7.14.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation Rmt 487.0 25.00 12175

3.4 7.14.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation Rmt 615.0 80.00 49200

3.5 7.14.5 19.0 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation Rmt 739.0 25.00 18475

3.6 7.14.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation Rmt 904.0 10.00 9040

3.8 7.14.10 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation Rmt 1286.0 10.00 12860

Supply, Installation, Testing and Commissioning of Y/T/Multi Joints. Joints shall be of same Original

Equipment Manufacturer (OEM) make as of ODUs and IDUs

7.13.1 Indoor Units Each 4535 5 22675

7.13.2 Outdoor Multi Joint Each 8098 0

4 CONDENSATE DRAIN UPVC PIPE

Supply, installation, testing and commissioning of uPVC Pipe ,complete with fittings, supports,U trap

arrangement,Clean Plug with 6mm nitrile insulation and accessories as per specifications, drawings.

Providing and fixing control cum transmission wiring of 2 core x 1.0 sq. mm copper in suitable conduits 19,392.00

between indoor and outdoor unit.

MR Supply and fixing IP-55 based outdoor MCB box with 1 NOS 65 amp RCCB Nos 14650.0 1.00 14,650.00

MR Supply and fixing MS base frame for VRV outdoor stand as per approved size NOS 18650.0 1.00 18,650.00

Total Amount 632437 66221

Total Amount 632437 66221

Digitally signed by AMIT

S No Description UNIT RATE TOTAL AMOUNT

S No Description UNIT RATE TOTAL AMOUNT

A. UTP Components for Data DSR (INR) NON-DSR (INR)

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for

1 Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 MHz, Mtr 200 57.00 11400

Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply, Installation, Testing and Comissioning of I/O port for CAT6A cable termination at

Work Station end. Keystone Unshielded Outlet, 180DG C6

Supply , Installtion , Testing and Comissioning of CAT6A patch cord 2 Mtr (7 feet)

3 for information outlet (I/O) to end user device connectivity. High Speed Gigabit Nos. 18 275.00 4950

24AWG U/UTP Patch Cord, LSZH, C6

Supply , Installtion , Testing and Comissioning of CAT6A patch cord 1 Mtr (3 feet) for

4 information outlet (I/O) to Rack End Redantant device connectivity. High Speed Gigabit Nos. 18 280.00 5040

24AWG U/UTP Patch Cord, LSZH, C6

Supply , Installtion , Testing and Comissioning of 24 port Loaded Jack Panel for CAT6A

cable termination at rack end. Data Active

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for

6 Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 MHz, Mtr 300 57.00 17100

Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination at

Work Station end. Keystone Unshielded Outlet, 180DG C6

Supply , Installtion , Testing and Comissioning of 24 port Loaded Staggred Jack Panel for

CAT6 cable termination at rack end. Voice Active

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 1 Mtr (3 feet)

9 for information outlet (I/O) to end user device connectivity. (Rack end), High Speed Nos. 10 235.00 2350

Gigabit 26AWG Patch Cord, LSZH, C6

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet)

10 for information outlet (I/O) to end user device connectivity.High Speed Gigabit Nos. 10 275.00 2750

24AWG U/UTP Patch Cord, LSZH, C6

Supply , Installtion , Testing and Comissioning of 2 Port British Style Shuttered Face Plate

white for I/O fixing at user side

Supply , Installtion , Testing and Comissioning of 24 port Loaded Staggred Jack Panel for

CAT6 cable termination at rack end. Riser Active

Supply , Installtion , Testing and Comissioning of 400 pair MDF box complete with Krone

Digitally signed by AMIT

S No Description UNIT RATE TOTAL AMOUNT

S No Description UNIT RATE TOTAL AMOUNT

14 Supply , Installtion , Testing and Comissioning of 50 pair riser cable Mtr 15 1,053.00 15795

C Network Rack and Other Accessories 0

SITC of 24U 600x600 Server Rack with perforation, Glass Door, Cable managemenet,

6/16A power strips- 2 nos, Castors, 4 fan for cooling, Rack should have shelves - 4 nos

16 Supply & Installation Testing & Commissioning of 48 PORT managed Network Switch Nos. 1 52,250.00 52250

Digitally signed by AMIT

IP BASED CCTV SYSTEM (INR) (INR)

S No Description UNIT QUANTITY RATE AMOUN AMOUNT

Supply, installation, testing and commissioning of 2MP 2.8mm/3.6mm wide angle fixed lens IR Dome Camera 1/3" Progressive

Scan CMOS; H.265+/H.265/H.264+ /H.264/MJPEG; Colour: 0.01 lux @(F1.2, AGC ON), 0 lux with IR; 25fps/30fps (2560×1440,

1920×1080); 3 VCA functions; 3 streams; 3D DNR; ICR; EXIR 2.0, up to 30m; DC12V&PoE

Supply, installation testing and commissioning of Network Video recorder Linux based to manage and control all the

cameras from control room. Software shall support maximum 16 channel with joystick controller. 256Mbps Bit Rate Input

2 Max(up to 32-ch IP video), 2 SATA Interfaces, alarm I/O: 16/4, 1.5U case,19" with 2x4TB i.e. 8TB HDD inside Nos. 1 44500.00 44,500.00

Supply Installation Testing & Commissioning of 43 inch Full HD LED monitor including wall mount brackets/ clamps/ desk

3 mounting stand. Nos. 1 43250.00 43,250.00

Supply & Fixing of PCB based Information Outlet (I/O) RJ45, TIA-568C Category-6, Termination of Catergory-6 UTP Cable, UL listed,

Shall conform to Category-6 as per the EIA/TIA-568C.2, Shall support network line speeds up to 1 Gbps, Shall have RJ-45 type

connector with bend limiting and strain relief boot for securing IDC contacts from external forces and for maintaining the bend

radius of the cable, Shall have minimum durability of 750 mating cycles and 200 termination cycles. Shall be certified by

independent labs like ETL/GHMT for compliance to EIA/TIA-568C.2. The outlet shall be fixed in existing box & cover plate in

wall/furniture/floor complete as required.

Supply & Fixing of Single Faceplate, Single Port (RJ45-DATA) square plate having spring shuttered front access for preventing

5 ingress of dust, dimension as per commercially available modular office furniture. Nos. 4 80.00 320.00

Supply & Fixing of UTP Jack Panel UL listed, loaded with 24 no's UTP ports for PCB based IO Jacks (RJ45, TIA- 568C Category-6),

having integrated bonding bar or other mechanism for grounding, loaded with individually replaceable 24 nos.

Category-6 I/O Jacks complying with TIA-568.C.2. Shall be 6 port module construction for better cable dressing at the

6 rear. The jacks shall have RJ-45 type connector with bend limiting and strain relief boot for securing IDC contacts from external Nos 1 16500.00 16,500.00

forces and for maintaining the bend radius of the cable.

Supplying & Fixing of Category 6, UTP patch cords constructed of 24 AWG unshielded twisted pair stranded copper cable

with an enhanced performance modular plug at each end. Patch cord cable shall be offered in multiple coloured UTP cable for

7 design flexibility with a clear strain relief boot on each modular plug. All patch cords shall be compatible with both T568A and Nos. 4 235.00 940.00

T568B wiring schemes. UTP Cable, 2 Meter.

Supplying & Fixing of Category 6, UTP patch cords constructed of 24 AWG unshielded twisted pair stranded copper cable

with an enhanced performance modular plug at each end. Patch cord cable shall be offered in multiple coloured UTP cable for

8 design flexibility with a clear strain relief boot on each modular plug. All patch cords shall be compatible with both T568A and Nos. 4 275.00 1,100.00

T568B wiring schemes. UTP Cable, 1 Meter.

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - LIGHTING WORKS

S NO DSR- Unit QTY Rate DSR NON DSR

2025 Description AMOUNT AMOUNT

LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 < 120lm/Watt ) Supplying, installation, Testing &

Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) SMD type of following body

material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement

with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -15

deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P.

F.≥0.95, IP20, CRI >80 , UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time

(LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life

ends , CCT 3000°K / 4000°K / 5700°K / 6000°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Color

Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be

confirming to relevant BIS standards and trade mark certificate (T.C.). Manufactures Word Mark/Name Engraved/

Embossing/ Screen printing on housing Complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated

copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System

lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for

LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per

requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not

rise above 90°C) Powder coated die cast /Extruded aluminum Body including trim 1

LED Panel light 2x2 ft. (System lumen efficacy ≥105 <120 lm/Watt) Supplying, installation, Testing & Commissioning

of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the

requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -

15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% ,

P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time

(LED,Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life

ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6000°K / 6500°K (As perANSI Bin),

2 1.6 SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified

rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/

Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm

FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM

warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing

required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-

Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction

temperature shall not rise above 90°C). Powder coated die cast / Extruded aluminium Body (Thickness ≥ 1.20 mm)

Digitally signed by AMIT

S.NO. DESCRIPTION Qty UNIT RATE

NO. Amount AMOUNT

INTELLIGENT FIRE ALARM SYSTEM

Supplying, installation, testing and commissioning of micro processor

based intelligent addressable main fire alarm panel, central processing

unit with the following loop modules and capable of supporting not less

than 240 devices (including detectors) and minimum 120 detectors per

loop and loop length up to 2 km, network communication card, minimum

320 character graphics/ LCD display with touch screen or other keypad

and minimum 4000 events history log in the non volatile memory (EPROM),

power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed

a) maintenance free batteries with automatic charger. The panel shall have

facility to connect printer to printout log and facility to have seamless

integration with analog/digital voice evacuation system (which is part of

the schedule of work under SH: PA System) and shall be complete with all

accessories . The panel shall be compatible for IBMS system with open

protocol BACnet/ Modbus over IP complete as per specifications.

Supplying, installation, testing & commissioning of intelligent analog

c) 17.2.4 addressable photothermal detector complete with mounting base 10.00 No. 2858.00 28580.00

complete as required.

Supplying, installation, testing & commissioning of response indicator on

d) 17.2.5 surface/recessed MS Box having two LED, metallic cover complete with 2.00 No. 276.00 552.00

all connections etc as required.

Supplying, installation, testing & commissioning of fault isolator complete

with base as required.

Supplying, installation, testing & commissioning of addressable fire control

module complete as required.

Supplying, installation, testing & commissioning of addressable manual

call point complete as required.

Supplying, installation, testing & commissioning of addressable horn cum

strobe complete as required.

CABLING & WIRING

Digitally signed by AMIT

S.NO. DESCRIPTION Qty UNIT RATE

NO. Amount AMOUNT

Supplying & laying of 2x1.5 sqmm fire survival alarm armoured

cable, 600/1000V rated with annealed copper conductor having

a) 17.5.2 XLPE insulation, steel wire armouring & ERLS outer sheath complete 150.00 Metre 173.00 25950.00

Providing and fixing ISI Marked of approved make Fire Extinguishers

4 complete with all accessories as per manufacturer's specifications.

a) CO2 gas nozzle type - 9 Litre capacity (IS:15683). 1 NOS 14500.00 14,500.00

b) Mechanical Foam gas cartridge type. 9 Kg capacity (IS:15683). 1 NOS 4560.00 4,560.00

c) ABC dry powder stored pressure type 6 kg capacity (IS:15683). 1 NOS 6500.00 6,500.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: SIGNAGE

S No Description Unit Qty Unit price DSR Amount

Providing and Fixing Logo & Signage in 3D ,as per the approved Design/ pattern with Mat

/Gloss Finish Brass Letters with Mettalic/ Acrylic Base, complete as required at site with sq inch 7500 18 135000

the direction of the Enginner In Charge

Digitally signed by AMIT

Sno. Item Specifications Rate Qty Amount

Supplying and placing in position of main table as per photograph/drawing .The table shall be made out of

25mm thick pre -laminated particle board of approved shade. The working and non working edges shall be

finished with machine pressed with 2mm PVC egdge banding. The table top shall be supported with MS powder

1 DGM Table coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x 40mm. The front modesty are made 65,650 1.00 65650

out of 18mm thick prelaminated particle board with 2mm thk pvc edge banding. The table shall be provisioned

with Side unit of overall size: 1800mm(L) x 450mm(D) x 675mm(H) . Side storage having a provision for three equal

drawer unit and two openable shutter & one open

Supplying and placing in position of 360 degrees revolving high back chair . The chair of Size

:-(W)590mm X (D)505mm X (H)1180mm - 1280mm. The chair shall be ergonomically design contour lumbar back

design made of 12mm thick BWR plywood (IS Grade - 303 for seat and back) upholstered with leatheritte and cut

2 foam. The chrome plated loop armrest with padded upholstery is provided for extra comfort. The chair shall be 24,650 1.00 24650

provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm . Five star chrome base

with nylon castors . Chair seat has foam of density 30- 35 (+/ 2kg /m3) Dimensions The backrest has a foam of

Supplying and placing in position of medium back cantilever chair of size: (W)610mm X (D)505mm X (H)990mm.A

contemporary design with an all black finish, . Material & subtype:Premium Leatherette, Colour & Colour

DGM Visitor Family:Black, Dimension(W)610mm X (D)505mm X (H)990mm, Back Type:Cantilever, Base:Cantilever Frame, Base

Back Chair Type:Cantilever, Maximum Seating Height:19".The Seat & back are made up of 12mm thk hot pressed plywood

upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The backrest has a

foam of 28kg/m3.

Supplying, and placing in position of sofa with premium Leatherette upholstery adds class to the soft cushioned

backrest and seating. Material & subtype:Premium Leatherette, Colour & Colour Family:as per requirement,

Seating Height:16.14",Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern, Texture:Two Tone. steam

4 2 seater sofa beech solid wood have used for framing construction of sofa .The seat cushion is made of multi layered foam of 42,500 3.00 127500

density 32-35 kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon

bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of

200 gsm. 2 seater Dimension(L)1390mm X (D)750mm X (H)710mm

Digitally signed by AMIT

Sno. Item Specifications Rate Qty Amount

Supplying and placing in position of main table as per photograph/drawing .The table shall be made out of

25mm thick pre -laminated particle board of approved shade. The working and non working edges shall be

finished with machine pressed with 2mm PVC egdge banding. The table top shall be supported with MS powder

coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x 40mm. The front modesty are made

out of 18mm thick prelaminated particle board with 2mm thk pvc edge banding. The table shall be provisioned

5 AGM Table with Side unit of overall size: 1800mm(L) x 450mm(D) x 675mm(H) . Side storage having a provision for three equal 55,650 5.00 278250

drawer unit and two openable shutter & one open storage with shelf in it. The Side unit top shall be made out of

18mm thick pre laminated particle board and rest all storage to be made out of 18mm thick pre laminated

particle board. Provision of Junction box, wire raceway and 6 module fliptop box for wire passing or as per site

requirement. Main Table Dimension (L)1800mm X (D) 900mm X (H)750mm overall Side Runer Dimension (L)1800mm

Supplying and placing in position of 360 degrees revolving high back chair of size: 660mm (L) x 490mm(D) x

1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof plywood and moulded foam. The

seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303) upholsetered with Polyurethane

AGM Back foam and mesh fabric over it. The chair shall be provided with self tension single locking mechanism and

Chair pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The black .The pneumatic height

adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force.The Seat &

back are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat

has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3. adjustable arm rest and head rest

Supplying and placing in position of 360 degrees revolving medium back chair . The Craze chair of Size :-

(W)590mm X (D)505mm X (H)1005mm - 1115mm. The chair shall be ergonomically design contour lumbar back

Medium Back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and back) upholstered with leatheritte and cut

chair foam. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .

Five star chrome base with nylon castors . Chair seat has foam of density 30-35 (+/- 2kg /m3) The backrest has a

foam of 28kg/m3.

Dimension: 1200mm(L) X 600mm(D) x 1050mm(H) Supplying, and placing in position of linear workstation as per

Image.The worktop made out of 25mm thk. Prelam Particle board with 2 mm thk PVC edge banding.The Table

top supported on Mild Steel of size 50mm x50mm Slanted Leg and 50mm x 25mm Horizontal connectors with

Powder coting of 50 Micron.Middle Leg :- 0.8 mm thk Metal panel fixed on both side of the "T" leg for Vertical wire

carrying purpose.(Sharing Workstation). 0.8 mm thk Single/Double metal powder coated raceway with Powder

coting of 50 Micron below top for wiring.Vertical wire carrying pole with powder coating 50 micron below top for

9 wiring( Non- sharing workstation ). Also having a provision of ms perfoated sheet hanging modesty. provision of 26,650 4.00 106600

glass divider rest on the "D" brackets on the table top between opposite seatings. All working or non working

edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot

temperature. Provision of pullout PVC keyboard tray and CPU trolley for each seating. Also a provision of Pedestal

Unit (size:- L-400mm x D-450mm x H-600mm) with a combination of 2 drawer & one filing drawer. The pedestal

storage unit shall be made of 18 mm thick prelaminated Particle board with provision of handles & Locking

Digitally signed by AMIT

Sno. Item Specifications Rate Qty Amount

Providing & Installation of Pantry table of size 1.8m x 0.75m x 1.05m (ht) made out of 19mm thk. Commercial

Board finished in Laminte.

11 Pantry chairs Providing & Installation of Pantry chairs of required dimension and as per instruction of EIC 2,450 12.00 29,400.00

12 TABLE CENTRE TABLE WITH GLASS TOP 15,500.00 2.00 31,000.00

13 Cafeteria TABLE WITH WOODEN STRUCTURE for 4 Person 14,500.00 3.00 37,500.00

SIZE:750 @ DIAX750HT

Table Top- Made of 25mm thick prelaminated particle board of approved shade confirming to E1 norms. All the

edges of workstation surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with

14 hotmelt Eva glue free from any VOC. 18,500.00 1.00 18,500.00

Gable End And Modesty - Made of 18mm thick prelaminated particle board of approved shade confirming to E1

norms. All the edges of workstation surface shall be provided with machine pressed 2mm thick imported PVC

lipping glued with hotmelt Eva glue free from any VOC.

Supply and Placing of Reception Table, made from pre-laminated particle board with laminate finish.

Includes drawers, keyboard tray, modesty panel, and cable management.

15 All hardware fittings (handles, channels, locks) included. 32,000.00 1.00 32,000.00

Finish and design as approved by Engineer-in-Charge.

Complete in all respects as per approved design.

The storage top 25 mm thick, shutter and side panels are made of 18mm thick and back panel is made of 09mm

thick MDF of approved shade. All the edges of storage surface shall be provided with machine pressed imported

PVC lipping glued with hot melt EVA glue free from any VOC with free groove handle and suitable lock. All

exposed area PVC edge lipping

Total Amount 1194795

Total Amount 1194795

Digitally signed by AMIT