RECTIFICATION OF DEFECTS TO BUILDING NO. 52, 53, 54 AND 55 AT BAIRD PLACE UNDER GE (EAST) DELHI CANTT-10

Amount

Taking down cement or lime plaster any description on brick or stone walls etc including recking out joints hacking for key scrubbing down with waters etc.complete all as specified and as directed.

Dismantling floor, hearth or wall ceramic tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all specified and directed

Taking up or down steel tubing / PLP pipes and connections 15mm dia including cleaning for refixing or removal to store complete all as specified and as directed.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar1:3 in brick or stone wall , cutting not exc 10cm girth complete all as specified and as directed.

Supplying and laying of CPVC 20mm OD pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl brass coupling fittings complete all as specified complete with fitting as required.

M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces , applied in two layers i.e.. Ist layer of 10 mm thick rendering in cement mortar (1:6 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 ) mixed with WPC finished even and fair etc complete all as specified and directed.(Note:- WPC shall be measured and paid separately.)

M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and fair without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound and to mixed as per manufacturer instruction complete all as specified.

M & L Glazed ceramic tiles of approved colour and design in vertical surfaces 300mm X 600 X 7mm thick including provision of high lighter tiles/boarder and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cement mortar 1:3 etc complete all as specified and directed.

S&F non skid ceramic coloured tiles 7 to 8mm thick area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match, over 15mm thick screed bed in CM (1:6) complete all as specified and directed.

S&F wash basin, Vitreous China white flat back of size 550x400mm including cutting for and pinning in ends of brackets or erecting stand but excluding taps, waste, chain and plugs and proclain stopper but including brackets fixed in repairs complete all as specified and directed..

S&F vitreous china wash basin under counter ovel type size 560x450x175mm of Make jaquar, Hindware or equivalent make as specified in list of makes in PS under granite slab with all fitting and fixture complete all as specified and as directed and fixed in repairs.

Supply and fix in repair PVC 10 Ltrs valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with flush pipe etc. ISI approved complete all specified and directed.

S&F in repair 15mm dia chromium plated quarter turn wall mixer hot & cold Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (with Hand Shower & without Overhead Shower) fixing and connection to pipes, complete all as specified and directed

S&F Vitreous china wash down water closet pan (pedestal pattern) excluding flushing cistern and flush pipe, including fixing of water closet complete with plastic water closet seat black/white closed pattern witrh flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs Hand Shower (Health Faucet) with 8 mm Dia, 1 Meter Long Flexible Tube & Wall Hook completed all as specified

S&F in repairs cast copper alloy CP toilet paper holder fixed with plug and brass screw complete all as specified and directed.

S&F Towel Rail 600mm long of Stainless Steel fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. (Make: Jaquar cat part No ACN-1111SM or Kohler cat part K-25065IN-CP or Hindware cat part No : F890011).

S&F looking mirror size 600x450mm mounted on 6mm thick PVC sheet and aluminium frame all around incl fix with necessary fixing arrangement complete complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.50mm thick sheet glass self 12cm wide with chromium plated brackets guard and railing 60 cm long complete all as specified and as directed in repairs.

S&F in repair fancy type glass corner 300 mm radius of 10mm thick toughened glass with CP railing fixed with and best quality with screws fancy type complete all as specified (as per sample approved by GE)

S&F in repair Brass CP Basin mixer central hole for making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for fixed to CPVC pipe and fittings or unions, complete all as specified and directed.

Supply and fix in repairs cast copper alloy chromium plated angle cock, of 15 mm bore complete all as specified and directed. (Make: Jaquar cat part No CON-059KN or Kohler cat part K-11568IN-7B-CP or Hindware cat part No F730039)

Supply and fix in repairs PVC connections 450mm long, 15 mm size with brass chromium plated nuts at ends complete fixed in repair complete all as specified and directed.

S & F in repair Overhead Shower 200x200mm Square Shape Single Flow (Body & Face Plate Stainless Steel) with Rubit Cleaning System with 300 to 600 mm long shower arm, fixed to CPVC pipe and fittings, complete all as specified and as directed

S & F in repair Towel Ring Round with Round Flange fixed in positon with and including chromium plated brass screws and wooden/plastic cleats, complete all as specified and as directed

Taking down rain water / vent pipe or waste out let pipes of any description / size including fittings etc including removal to store, complete all as specified and directed.

S&F in repairs 100mm cast iron sanitary connection `P' branch, with branch 370 to 450mm long including joints etc complete all as specified and directed.

S&F in 100mm bore Hubless cast iron spun pipes, soil waste and vent pipe in any length with or without ears with cement joints fixed to walls/ceiling or laid in floor incl Hubless stainless steel coupling 50mm wide, MS clamp 40 x 6 mm flat iron and 12 mm dia round iron stays including bolts and nuts including securing to wall in PCC (1:2:4) and making good in cement mortar (1:3), complete all as specified and directed..

S&F in repairs CI bends Bends of 100 mm bore complete all as specified.

S&F 100 mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including securing ends of stays to wall or roof complete all as specified and directed.

Supply and fixing Cast iron (single T) equal or un equal 100mm complete all as specified as directed.

M&L for preparation of the newly plastered surfaces of walls applying wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth to receive primer and applying one coat primer & two coats Distempering with, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.

M&L for preparation of the newly plastered surfaces of ceiling applying wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth to receive primer and applying one coat primer & two coats of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.

S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washer and wastes, including in cement mortar to dwarf wall or including fixing cantilever brackets and connnecting union to pipe over all size 915mmx460mm bowl size 410mmx330mmx160mm with all fitting and fixture complete all as specified and directed fixed complete all as specified and directed.

S&F in repair Brass CP sink mixer with swinging spout (wall mounted model with connecting legs & wall flanges for making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for fixed to CPVC pipe and fittings or unions, complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as ditected.

S&F mild steel butt hinges medium weight cold rolled of size 100 mm with welding arrangement fixed to shutters. complete all as specified and as directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails braces, etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including hooks and hanging or sliding with and including hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rail and guides) and hanging, also fastening and fixing of 410 W(GDE- E - 250) quality "A" complete all as specified.

Mild steel 0.80mm thick plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

Demolition of stone slab and tiles laid bedded and pointed in any mortar, of any description or thickness in floor, aprons and other similar work complete all as specified and as directed..

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed..

S&F in repairs fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified. (Make: Jaquar cat part No CON-047KN or Kohler cat part K-16093IN-4-CP or Hindware cat part No : F730041)

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

M&L for preparation of old decorated surface (plastered or unplastered) of walls by complete removal of existing treatment by mechanical grinder and applying cement base wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth to receive primer and applying one coat primer & two coats Distempering, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.

All as per item no. 45 here in before but on ceiling surfaces complete all as specified and as directed..

M&L for preparation of old wooden surfaces of any description, not otherwise, described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old steel surfaces of any description, not otherwise, described, over 10cm width or girth and applying one coat of synthetic enamel pint complete all as specified and as directed.

Dismantling wall & ceiling boards (fibre, insulation etc ) or insulation boards, slabs, blankets any thick ness including cover fillets complete all as specified and as directed..

M&L of false ceiling with GRG (Glass fiber Reinforced Gypsum) tile with semi perforated 12 mm thick micro tegular edge of size 595x595mm of approved textures design and patterns having moisture content less than 2% humidity resistance of 99%, NRCO 50 to 0.75 as per IS 8225:1987. Noncombustible as per BS 476(Part 4)-1970 and light reflectance of 85% (Minimum) to be laid in the horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 gms per Sqm including both sides) comprising of main T runners of size 15x32mm of length 3000mm, cross-T of size 15x32mm of length 1200mm and secondary intermediate cross-T of size 15x32mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanized @80 grms per Sqm) i.e. 50mm long, 8 mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rode upto 1000mm length and L-shaped level adjuster of size 85x25x2mm. Galvanized iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partition with the held of plastic rawl plugs at 450mm c/c and 40mm long dry wall wood screws, complete all as approved by Engr-in-charge

BLANK

Hacking out glasses from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

S&F Sheet glass 3mm thick ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F Figured glass 3mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

M&L for galvanised wire cloth 0.56mm nominal dia of wire and average width of aperture 1.00 mm and fixed in repairs with tinned tack or galvanised wire staples all as specified and as directed complete all as specified and as directed.

Dismantling wooden boarding of any description fixed in any position with screws complete all as specified and as directed.

Taking down chowkats/Frames of area n. exc 1.5 Sqm each with shutter (without taking off shutters from the frame) each. complete all as specified and as directed.

Taking down chowkats/Frames of area exc 1.5 Sqm and n. exc 4 sqm each with shutter (without taking off shutters from the frame) each. complete all as specified and as directed.

M&L for Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.including filled with PCC 1:3:6 type B- 0 , complete as specified, supplied and fixed complete all as specified and as directed.

M&L for Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.including filled with PCC 1:3:6 type B- 0 , complete as specified, supplied and fixed complete all as specified and as directed.

S&F flush shutter 35mm thick Solid core construction with Block board and plywood face pannels, commercial type on both sides. complete all as specified and as directed.

Providing & Fixing in repairs factory made 18 mm thick one side decorative and other side balancing lamination factory pressed HDHMR Board of action Tesa and equivalent including 2 mm thick with PVC edge banding tape with hot glue by edge bending machine etc, with auto closing spring loaded hinges (hydraulic type) etc, brass handle/ knob etc, as in Cupboards shutters, sides, top, bottom and in any position complete as per direction of Engr-in-Charge complete as per direction of Engineer-in-Charge.

S&F in repair fancy type brass chromium plated soap dish, complete all as specified. Make: CERA cat part no.F5004106, Prayag-BA15, Somany 27213033051 or equivalent as approved by GE

S&F Magic eye and fixed to doors all as specified and directed complete.

S&F in 1st class Hard wood beading straight ( any size ) for glazed or gauzed joinery , renewed , including mitres etc, and removing old beeding complete all as specified and as directed..

S&F 2nd class Hard wood glazed/skeleton shutters 35mm thick open rebated prepared to receive glass, gauze etc devided in squares with plain, chamfered or rounded, mitred and rebated sash bars any number with plain, chamfered or rounded, mitred and rebated beads for securing glass gauze etc. complete all as specified and as directed.

S&F aluminium window as per TD drg No CEDZ/TD-316 with following specifications :- (i) Outer frame of size 40mmx114mm with 1.3 mm thickness, corner 45 degree cut & aluminium welded. (ii) Center mullion of size 40mmx65mm (iii) Welded shutter (02 Nos) of size 40mmx60mmx1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp with 5mm clear glass both side IPDM rubber gasket metal body hand lever type single point lock, aluminium kobra hinges 2 Nos per shutter. (iv) 12mm SS 202 grade round bar safety grill at 100mm cc distance modified to 150mm cc distance in fron of handle, welded at both ends with 6mm SS 202 grade round bar. (v) Welded wire mesh shutter (02 Nos) of size 40mmx18mmx1.3mm thickness 45 degree cut with 0.45mm nominal dia of SS wire mesh SS 75mm long hinges & PVC magnet. (vi) Entire window shall be powder coated with pure polyster coat of any shade as approved by GE. (vii) Window shall be installed with silicone complete all as specified and directed by Engr-in-Charge.

M&L for galvanised wire cloth 0.56mm nominal dia of wire and average width of aperture 1.00 mm and fixedwith tinned tack or galvanised wire staples complete all as specified and as directed.

M&L Framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of watertanks and similar work complete all as specified and as directed..

S&F 100mm long (size) butt hinges, stainless steel AISI 304 grade with brass/bronze hinge pin complete

S&F 150mm size stainless steel AISI 304 grade fancy type handle complete all as specified and directed.

S&F stainless steel AISI 304 grade barrel tower bolt 200mm long, extruded section, etc. complete all as specified and directed.

S&F 300mm long, stainless steel , sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, and fixing bolts and sliding bolts and fixed, complete all as specified

M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamealle paint over a coat of pink primer. complete all as specified and as directed.

M&L for preparing new Steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamalle paint over a coat of red oxide zink chrome primer. complete all as specified and as directed.

S&F aluminium anodised hasp & Staple of size 100mm safety type stove enamalled black, including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F Mortice lock of mild steel vertical type of size 150mm 6 Lever with all fitting and fixture complete and fixed to wooden / aluminium doors all as specified and directed.

S&F stainless steel AISI 304 grade floor door stopper with twin rubber shoes double door stopper 75 mm long complete all as specified and directed

S&F 300mm size mild steel ordinary rat & tail rod pattern spring (Halical) including rollar & rollar plate fixed to wooden / MS frame complete all specified and directed.

Easing / straightening of shutters and frame of steel windows of any type making operational and greasing to hinges including welding as required complete all as specified and as directed

S&F in repair 25 mm dia & 1.20mm thick SS curtain rod stainless steel AISI 304 , with fixing of brackets, side knobs of good quality as approved complete all as directed.

M&L for preparation of new/ old plastered or unplastered surfaces of wall and applying two coats of white wash complete all as specified and directed.

&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkhat of size 65x 110 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note: For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e. depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made .etc completed all as specified and directed.

S & F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, .etc completed all as specified and directed (Note: stainless steel butt hinges shall be paid separately under relevant item).

M&L for prepration of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed .

M&L for taking out cement/lead joints of CI bends, connection Peaces, "P" or "S" branch and filling with lead joints / neat cement plaster to stop leakage of joints and refixing the same fittings in proper position complete all as specified & directed

Taking up or down 40 / 50 mm dia steel tubing and connections fixed in any position with waste water outlet etc complete all as specified

Taking up or down 32 mm dia steel tubing and connections fixed in any position with waste water outlet etc complete all as specified

Supply and fixing steel water tubing `medium grade’ galvanized 50 mm bore with all fittings and fixing arrangements in any position with provision of waste water outlet etc including cutting holes, welding, sockets, Tee and plug nuts as required complete all as specified & directed.

Supply and fixing steel water tubing `medium grade’ galvanized 40 mm bore with all fittings and fixing arrangements in any position with provision of waste water outlet etc including cutting holes, welding, sockets, Tee and plug nuts as required complete all as specified & directed.

Supply and fixing steel water tubing `medium grade’ galvanized 32 mm bore with all fittings and fixing arrangements in any position with provision of waste water outlet etc including cutting holes, welding, sockets, Tee and plug nuts as required complete all as specified & directed.

Taking up or down steel tubing and connections of HD pipe of any type 80 mm dia including removal from site complete all as specified and as directed.. (Note :- work to carried out in S + 8 storeys and rates are including for the same)

Taking up or down steel tubing / PLP pipes and connections 20mm dia including cleaning for refixing and removal to store complete all as specified and as directed.

Supply and fixing steel water tubing `medium grade’ galvanized 80 mm bore with all fittings and fixed complete to walls and ceiling including joints fixed with adhesive complete all as specified & directed.

Supply and fixing steel water tubing `medium grade’ galvanized 20 mm bore with all fittings and fixed complete to walls and ceiling including joints fixed properly complete all as specified & directed.

S&F 15 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and as directed.

S&F 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and as directed.

S&F in repairs 40 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed in repairs complete all as specified and as directed.

S&F in repairs 80 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed in repairs complete all as specified and as directed.

Taking down and refixing of Stair case railing including balusters, hand rails, fasteners, cutting and making of concrete block for holding of fixing arrangement, provision of welding and to made the railing proper serviceable with all respcet complete all as specified and as directed by Engr - IN - charge.

M&L Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete.

M&L French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and as directed.

S&F in repair Magnet ball catcher brass body with 8mm dia steel ball of approved qualities complete all as specified

S&F in repair 40 mm dia. cup boards knobs fixed with nut , screw and washer of mild steel , bright finished complete all as specified and as directed.

M&L Resecuring or Easing and adjusting sliding doors, (with/without taking down shutters) for easy opening /closing, by repair/replaceing tracks, sliding wheels, clits, doors etc and changing its position or adjustment of tower bolts/sliding bolts area not exc 4 sqm each complete all as specified and directed.

S & F non skid ceramic coloured tiles 7 to 8mm thick area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match, over 15mm thick screed bed in CM (1:6) complete all specified and directed

S&F SS Grating doom 100 mm dia with or without waste hole complete all as specified.

S&F SS Grating doom 75 mm dia with or without waste hole complete all as specified.

M&l for rendering 15mm thick in cement mortar 1:6 on fare faces of brick work or concrete surfaces and finished the surface even and smooth without using extra cement incl taking down cement or lime plaster any description on brick or stone walls etccomplete all as specified.

S&F in repair of 110 mm bore SWR pipes single socketed in any length with rubber ring joints fixed to walls ,floors, trenches etccomplete all specified and directed.

S&F in repair of 150 mm bore SWR pipes single socketed in any length with rubber ring joints fixed to walls ,floors, trenches etc complete all specified and directed.

S&F in repair 110 mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed.

S&F Aluminium alloy powder coated (50 micron) anodized three track heavy duty aluminium (glazed/ gauged) door shutters sliding type incl toughened glass of minimum thickness 8 mm, obscured or frosted and stainless steel wire mesh, with or without sash bar aluminium section weighting 0.55 Kg per mtr including frame necessary joining cleats, glazing clips, rubber packing, anodised aluminium beading , sliding channel, roller screws incl 200 mm long tower bolt-2 Nos on each leaf, 200 mm long Aluminium handle -02 Nos on each leaf, 4 lever lock brass 100 mm long mortice lock, including all fittings and Taking down chowkhats/ Frames with shutter (without taking off shutters from the frame) each complete all as per direction of Engr-in-charge. Door shall have following features: (i) Sealing to protect from noise and dust (ii) shall withstand maximum wind speed of 8 m/s (iii) drainage solution to keep out heavy rains (iv) anti lift plug and anti burglary locks for extra security (v) custom-engineered rollers for smooth operation.

Demolition and breaking up SGSW drain pipes 150 mm dia jointed in cement mortar complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

Demolition in cement concrete of cement concrete in ground floor and paving not exc. 15 cm thick below or above ground level complete all as specified and as directed.

Demolition of reinforced concrete in Manhole Cover complete all as specified and as directed by Engr-in-Charge.

Demolition in cement concrete of any description and in any position not other wise specifically provided of complete all as specified and as directed.

M&L cement concrete bed (1:3:6) type D-2 using 40 mm graded stone aggregate as in Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; to SGSW pipes 150 mm dia of drain pipe complete all as specified and as directed.

Excavation in trenches, in any type of soil n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out

Returning filling in incl spreading leveling, watering, and well, ramming in layer nexc 25 cm in layers complete all as specified and as directed.

Removing excavated material to a distance exc. 250 m but n exc 500 m and depositing where directed by Engr-in-Charge at a level n. exc 1.50 m above the starting point complete all as specified and as directed.

M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean radius and built in CM 1:4 complete all as specified and directed.

M&L for PCC(1:3:6) type C - 2 using 40 mm graded stone agg as in foundation filling and mass concrete complete all as specified.

M&L for Providing, precast cement concrete Type B - 1, 1:2:4 (20 mm graded aggregate as in coping, landing, manhole cover and other covering slabs like septic tanks, soak well etc or other similar work set in cement mortar 1:6 complete all as specified and as directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, hooking ends and binding with mild steel wire ( annealed) not less than 0.9 mm dia all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (40 mm graded stone agg) as in Sub base to receve floor finishes etc complete all as specified and directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M&L Rendering 10mm thick in cement mortar 1:4 on fare faces of brick work or concrete surfaces and finished the surface even and fair using extra cement complete all as specified and as directed.

M&L for Cutting in to existing man holes for connecting new drains for internal dia of pipe 150 mm, making good to pipe and rendering , cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete 1 : 2 :4 type 'B1' smooth finished and reforming benching as required complete all as specified and as directed.

M&L SGSW drain pipes 150 mm dia laid in trenches and jointed in CM (1:3) complete all as specified and directed by Engr-in-Charge.

S&F in repair of 50mm bore PVC(SWR) bends with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack size 900 x 750 x 250 mm deep made out of 1mm thick sheet including fitting arrangement complete complete all as specified and as directed.. Make- Maharaja/Nirali/Prayag

Description of Work / Item(s)

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete,(fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.to be measured saperately) removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces complete all as specified and as directed.

M&L for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and stranded copper conductor cable ISI marked in existing /NEW PVC concealed conduit including FRLS, PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and in existing/New Metal flush box and making good surface complete all as specified and as directed for the following :-

one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.

one socket outlet point 5 amps on the same board.

one socket outlet point 5 amps on the independent board.

one light point controlled by two No. 2 way switch

All as per srl item no. 02 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 15 Amp light point complete all as specified and as directed..

S&F in replacement of Modular switch 6 Amp, 1 way, 1 module size complete all as specified and as directed.

S&F in replacement of Modular Bell push 6A 1 module complete all as specified and as directed.

S&F in replacement of Modular socket 6 Amp, 2/3 pin, universal type, 2 module size complete all as specified and as directed.

S&F in replacement of Modular switch 16 Amp, 1 way, 1 module size with indicator lamp complete all as specified and as directed.

S&F in replacement of Modular socket 6/16 Amp multipurpose type, 2 module size complete all as specified and as directed.

S&F in replacement of Modular switch 6 Amp, 2 way, 1 module size complete all as specified and as directed.

S&F in replacement of Modular Fan regulator step type, 70 watts, 2 Module size complete all as specified and as directed.

S&F in replacement of in repair Modular white cover plate with frame 1 module complete all as specified and as directed.

S&F in replacement of in repair Modular white cover plate with frame 2 module complete all as specified and as directed.

S&F in replacement of in repair Modular white cover plate with frame 3 module complete all as specified and as directed.

S&F in replacement of in repair Modular white cover plate with frame 4 module complete all as specified and as directed.

S&F in replacement of in repair Modular white cover plate with frame 8 module complete all as specified and as directed.

S&F in replacement of Modular sheet metal flush box fabricated out of MS sheet of size 1/2 module in cutting chases in wall and repair to wall with CM 1:4 complete all as specified and as directed.

S&F in replacement of Modular sheet metal flush box fabricated out of MS sheet of size 3 module in cutting chases in wall and repair to wall with CM 1:4 complete all as specified and as directed.

S&F in replacement of Modular sheet metal flush box fabricated out of MS sheet of size 4 module in cutting chases in wall and repair to wall with CM 1:4 complete all as specified and as directed.

S&F in replacement of Modular sheet metal flush box fabricated out of MS sheet of size 8 module in cutting chases in wall and repair to wall with CM 1:4 complete all as specified and as directed.

S&F in replacement of Call bell ding dong type, AC, 230V complete all as specified and as directed.

S&F in replacement of Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps complete all as specified and as directed.

S & F in replacement of LED energy efficient integrated battens fittings, aluminium extruded heat sink with shatter proof opal shell of polycarbonate compound,ABS Endcap,Ingress Protection IP 20 lUMAN efficiency 120lm watt rated voltage 240 V 50 HZ,safe operating voltage 180-280 v,power factor≥0.95,surge protection upto 2.5KV inbuilt ,input wattage 20 watts, cool/warm white as per site requirement complete all as specified and directed..

S & F in replacement of LED energy efficient integrated battens fittings, aluminium extruded heat sink with shatter proof opal shell of polycarbonate compound,ABS Endcap,Ingress Protection IP 10 lUMAN efficiency 120lm watt rated voltage 240 V 50 HZ,safe operating voltage 180-280 v,power factor≥0.95,surge protection upto 2.5KV inbuilt ,input wattage 10 watts, cool/warm white as per site requirement complete all as specified and directed..

Supply and fixing in replacement of wall light fitting comet type with and incl 9 watt LED lamp complete all as specified and as directed.

Supply and fixing in replacement of LED ceiling light fitting 15 watt, in round shape, surface type cool/warm white as per site requirement and making all electric connections complete all as specified and as directed.

Supply and fixing in replacement of LED bed side light, 5/6 Watts, wall mounted type and making all electric connections complete all as specified and directed.

Supply and fixing in replacement of Ventilating fan 200 mm sweep plastic body type including self cosing louver and making all electric connections complete all as specified and as directed.

S&F in replacement of ceiling fan 1400mm sweep, Copper winding,240 Volts. 50 Hz and depositing the old u/s to MES store yard complete all as specified.

Supply and fixing in replacement of Geyser 25 ltre capacity vertical type with steel tank and glass inner linen , 5 star rating complete including fastners for hanging and CP and PVC connection for inlet and outlet upto stop cock including taking down the old u/s geyser and depositing to MES store yard complete all as specifed and directed.

Supply and fixing in replacement of exhaust fan 300 mm sweep metalic body type and making all electric connections complete all as directed and depositing the old U/s item to MES store yard.

M&L in replacement of Sub main wiring with 2 run of 10.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to existing conduit with and including 10.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub DB complete all as specified and as directed.-

M&L in replacement fo Sub main wiring with 2 run of 4.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to existing conduit with and including 4.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub DB complete all as specified and as directed.-

S&F in replacement of rigid non metallic PVC conduit 25 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete all as specified and and as directed..

S&F in replacement of rigid non metallic PVC conduit 20 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete all as specified and and as directed..

S&F in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface IP 43 & IK 09 protection, SPN 16 way, 240 volts with bus bar rating 200 Amps including dust and vermin proof and making all necessary connections complete all as directed

Supply and fixing in replacement of Modular AC Socket with 25 Amps SP mini MCB, 230 Volts, 50Hz. In 3 module sheet metal enclosure complete all as specified and as directed.

S&F in replacement of MCB SP, C Curve type, 10 KA, 10 to 32 Amp, with over load and short circuit protection complete all as specified and as directed.

S&F in replacement of Isolator SPN, 63 Amp, complete all as specified and as directed.:

BLANK

Taking down modular sheet cover with back plate with any number of switches/sockets any module, complete all as specified and directed

Taking down water heater (Geyser) 25 ltre capacity, keeping in safe custody complete all as specified and as directed.

Taking down ceiling fan any size sealing cable end, dismentling blades and kept in safe custody and then refixing after repair work complete all as specified and as directed.

Taking down light fitting any type, size complete all as specified

Taking down exhaust fan 300 mm and ventilation fan 300mm, keeping in safe custody complete all as specified and as directed.

Supply and fixing of LED tube light fitting wall mounting type 20W with and including electric connection with two core PVC insulated PVC sheathed copper conductor flexible cable

S&F Modular switch 6 Amp, 1 way, 1 module size complete all as specified and as directed.

Blank

Blank

Blank

Blank

FIRE FIGHTING SYSTEM

Supply & Fixing in replacement of butterfly valve of CI body with epdm ring,ss stem 150 mm size/bore PN 16 bar conforming to IS 13095 including taking out the old unserviceable items complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in replacement of cast iron sluice valve PN 1.6 of 80 mm size/bore conforming to IS 14846 including taking out the old unserviceable items complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in replacement of cast iron sluice valve PN 1.6 of 65 mm size/bore conforming to IS 14846 including taking out the old unserviceable items complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in replacement of NRV PN 1,6 of 150 mm size/bore conforming to IS 5312 including taking out the old unserviceable items complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in replacement of NRV PN 1.6 of 65 mm size/bore conforming to IS 5312 including taking out the old unserviceable items complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 3 way fire brigade Inlet Connection (ISI marked) including nut, bolt washer and rubber gasket including taking out old items complete all as specified & directed by Engineer-in-charge

Supply and fixing Hydrant valve single headed fire brigade Inlet Connection (ISI marked) including nut, bolt washer andrubber gasket all as specified & directed by Engineer-in-charge

Material and fixing fire hose cabinet of size 1000 X 1650 x600 mm, weather proof,fabricated from 16 gauge MS sheet of fully weldded construction with hinged double front door, partially glazed with 4mm thick glass with locking arrangement duly painted with two coat of red oxide zinc chromate primer with " fire hose box written on front, suitable to house 2x15 metre (two lenth) of canvas hose with coupling, branch pipe, one fireman's axe, first aid fire hose reel and hydrant outlet grouting with PCC complete etc including taking out old unsv items.cotton synthentic fabric complete all as specified & directed.

S&F in replacement first aid hose reel full swinging type with 30 M length x 20 mm dia double rayon braide IS : 444 marked rubber pipe externally red coated with bronze shut off nozzle of 6 mm dia and Drum to be as per IS : 884, Hose shall be connected to the Riser through MS (H) 25 mm dia pipe complete with all fittings and ball valve. Rate shall include 25 mm dia pipe connection from riser to hose reel incuding all sockets , nipples, elbows and 25 mm ball valve. Hose Cradle shall be of aluminium alloy and complete all as specified & directed.

M& L for writing letters or figures(Black, Romon, Italic or Indian) with paint not exc 30cm height complete all as specified and directed by Engineer-in-charge

M & L Earthing complete with galvanized steel earth plate electrode 60x60cm.x6mm thick,buried directly in ground vertically to a depth filled around with with top edge of the earth plate at a depth not not less less than 2.25 mtr layer of charcoal dust and salt and less than 1.5 galvanized as iron earth lead by means of bolt, nut and check nuts connected to GI Strip main switch or steel and thimble and other ends of the earth and washers of and and protected by galvanized iron pipe strip connected chambers RCC pipe 15mm dia light grade with funnel and wire grade 4mm dia watering board light to center to 1:2:4 in pit cover reinforced with 8 mm dia deformed mesh, pcc 1:3:6 in shown in center both ways all as directed by Engr-In-Charge, bars 15cm disposal of test point ,including testing on completion and necessary connected earth earthing electric plate No 3 of MES Sch Part I of 2009 etc including complete all as to NOTE;-(i) The surplus soil complete and testing all as specified and directed. and unit rate shall be include protection pipe, GI water pipe, wire,length excavation, RCC pit cover.

Supply installing, testing and commissioning in replacement of electic driven automatic Terrace pump set consisting of the following :- Horizontally mounted end suctioin stage centifugal pump complete for delivery ofwith Mechanical seal.900 ltrs./minute against a total head of 35meters with bronze impeller complete with suitable rating Squirrel cage induction motor suitable for 415 V. 50Hz, AC supply of for the above pump with synchronous speed of 2900 RPM T.E.F.C type such as confirming to IP: 55 and flexible coupling and coupling guard with the pump Motor shall accept +/- 10% variation in voltage and +/- 3% variation in frequency Motor shall accept +/- 10% variation in voltage and +/- 3% variation in frequency Common bed plate of fabricated mild steel channel or cast iron type. Suitable cement concrete pump foundation of 1:2:4 ratio (1 cement. 2 fine aggregate 3 coarse aggregate ) with MS bolts washers as required. NOTE:- Old u/s motor and pump deposited to MES store yard.

Supply and laying earth contunity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit / pipe or fixed to poles or any other indica etc as required all as directed situtation for loop earthing etc. as required 4 mm dia galvanised iron or steel wire complete all as specified & directed.

Supply and laying XLPE Insulated ,armoured heavy duty electric cable with aluminium conducter ,1100 volts grade,cross-sectional area 16 sq,mm 4 core complete all as specified & directed.

Supply and laying cable with copper conducter ,1100 volts grade,cross-sectional area 10 sq,mm single core complete all as specified & directed.

Supplying and fixing in short gun metal branch pipe IS marked with 20 Each mm outlet bore complete all as specified & directed..

M&Lfor air pressure vessel of size 150mm/200mm dia x1.0mtr high with dished top and bottom end fabricated from 8mm thick ms sheet complete with air realease valve ,triped type stand pressure gauge with valve ,drain valve of 25mm dia with 2mtr long gi pipe, pcc foundation complete all as specified & directed.

M&L for aluminium conductor ,1100 volts grade,cross-sectional area 4 sq,mm 3 core complete all as specified & directed.

Supply & fixing gun metal gate valves with iron wheel head, screwed both endsfor iron pipe, ISI Marked, as per IS: 778 of 50mm sizes complete all as specified and as directed at site by the Engineer-in-Charge.

Supply and fixing PTMT float valve, 50 mm bore with epoxy coated aluminium rod and high density plastic ball complete all as specified and as directed.

S&F in with brackets wall mounted Fire Extinguishers as per details below.

9 litres water type fire extiguisher IS 940 marked solid drawn seamless body with internal plastic lining and 60 gms CO2 cartridge , siphon tube, plunger (spring operated ) and discharge tube complete as required.

CO2 Fire Extinguisher of 4.5 Kg capacity fitted with screw down type high pressure control valve with 1.0 M long rubber braided discharge hose with horn. The body shall be CCE approved with IS :2878 marking supplied with initial charge of CO2 gas. The valve shall conform to IS :3224

5 Kg ABC Extinguisher of stored preesure type with discharge tube and pressure guage complete. Bidder shall give 5 years guaranrtee on cylinder with gas and powder. The cylinder shall be pressurised to 10 bar with nitrogen and shall confirm to IS;13849 . Powder shall be UL listed.

10 Kg Dry Chemical Powder Extinguisher with DC powder discharge tube, hand controlled nozzle , 120 grams charged Carbon dioxide cartidge and IS marked complete as required.

9 litres AFFF Foam type Fire Extinguisher

Photo Luminescent Zinc sulphide signages of 150 x 300 size with arrow on half side and graphics on other half, Signage shall be screwed to wall.

Flush mounted speaker in acoustically treated box with 4 watt speaker and line matching transformer.

detector complying with and type certified toEN -45 Addressable type smoke detector photoelectric/OPTIONAL with base with self built intellingence as per is;-11360

S&F in replacement of following sizes of MS steel conduit alogwith the accessories in surface / recess including painting in case of surface condoit , or cutting the wall and making good the same in case recessed condoit as required. Exposed conduits shall be fixed by saddles with base plate after every 500mm distance complete all as specified & directed.

(a) 20 mm dia

(b) 25 mm dia

Providing, fixing, testing and commissioning in replacement of 10 Zone Window type Main Fire Alarm Panel for Manual Call Box, Power Card, Rectifier , relay for actuation of hooter in respective floor , adjustable timer, sealed maintenance free batteries of 15 Ah capacity of 24 volts capable of running for a minimum of 12 hours with battery charger, LED indications for Fire Signal of individual unit , complete as per specifications. Each Floor shall have a separate relay for actuation of sounder through tone generator and PA Panel. Fire Alarm and PA Panel shall be in singal cabinet . Separate terminal box shall be provided with terminals from each fire alarm zone both for fire condition.

Supply and drawing in replacement FRLS WIRE PVC insulated multi starnded copper conductor, 2 x 1.5 sqmm cable in the existing surface / recessed PVC / steel conduit / PVC casing and capping complete with thimble and ferrules as required.

Taking down old unserviceable and Supply and fixing manual call point break glass type enclosed in M S enclosures body of 3 mm thickness complete with chain and harmer and incl inscriber in case of fired break glass complete all as specified & directed.

Taking down old unserviceable and Supply and fixing electrically operated Addressable sounder enclosed in MS enclosures of suitable size painted with sythetic enamaled paint red coloured complete with suitable transformer complete all as specified and directed by EIC.

Supply and fixing instanteneous type Stainless Steel branch pipe 63 mm dia of suitable length fitted with 16 mm dia nozzle complete all as specified & directed.

Taking down old unserviceable and Supply and Fixing water high pressure gauge 4'' capacity 0-14 kg/sqcm 100 mm dia complete all as specified and directed by Engr-in-Charge

S/F Sheet metal enclosure MCB ditribution board signle pole and nuetral two way 240 volts single door complete all as specified and directed by Engr-in-Charge

S/F Isolator SPN 16 Amps to 40 Amps 240 volts all as specified and directed by Engr-in-Charge.

supply and fixing in replacement of MS ERW Pipes heavy grade with all fittings such as bend, elbow,Tee, reducer etc laid in floors or fixed to walls upto 9 story Bldg and ceilings including welding, flange, fixing of pipe incl gasket, nut, bolt washer etc with necessary standard clamps structural steel support, cutting as required at site and of following bore.

NOTE- MS Pipes will be pressure tested at a pressure of 10 kg after fitting of all the accessories like Valves, RRL,HOSE PIPE ,etc and MS PIPE will be replaced at the leakage locations with the above said quantity.After replacing of MS PIPES at the said locations again pressure testing to be done with the same pressure and a saftey certificate is to be given by a fire expert.

Supply & Fixing and febrication,welding and fixing of MS frames made out of MS angle /flat of any size as required at site for repair /replacement of sump mainhole ,covers ,cesspit(HAUDI ) COVER,stair ,case,steps ,and all other iron works including covering top with ms sheet of suitable size and welding with the frame complete all as specified and directed.

Supply and fixing in replacement of L.T starter panel, outdoor type, made out of 3.15mm thick sheet, 3 phase 4 wire 440 volts, ac supply dust weather and vermin proof , aluminium busbar 100 amp . Mounted on SMC supports, angle frame 50*50*6 mm thick, panel shall be powder coated.( Particular ). 1. MCCB 80 AMP ,4P,18KA= 1. 2. MFM VAF+PF= 1. 3. R.Y.B INDICATING LIGHT =3. 4. MCB 6 AMP SP 10 KA=3. 5. C.T.S 0-100 AMP =3. 6. MCB 63A ,3P,10 KA FOR 15HP S/D =1 . 7. O/L RELLY 20-33 AMP =1 . 8. CONTACTORS MNX-25 AMP=3. 9. AUX BLOCK 2 NO+2NC=3 . 0. S/D TIMER 0-30 SEC=1 . 11. ON/OFF PUSH BUTTONS=2 . 12. ON/OFF INDICATING LIGHTS=2. 13. SINGLE PHASE PRIVENTER =1. 14. PHASE SEQUENCE RELAY=1. 15. CONTACTORS MNX-32=2.

Taking down old unserviceable and Supply and fixing circular woven jacketted rubberised fabric fire hose RRL 15 Mtrs long with coupling Stainless Steel 63 mm size male and female instantenous type

Taking down and supply and fixing, testing and commissioning of new ARD (Automatic Rescue Device) 1.5KVA with panel and including necessary internal wiring work, suitable for Johnson make lifts including ARD batteries of capacity 12V,07 AH - 04 Nos & battery box as per site position for the 08 passenger lift complete all as specified and directed ( Make- As per OEM Recommendation)

Taking down and supply and fixing, testing and commissioning of new ARD (Automatic Rescue Device) 2.5KVA with panel and including necessary internal wiring work, suitable for Johnson make lifts including ARD batteries of capacity 12V,17 AH - 04 Nos & battery box as per site position for the 13 passenger lift complete all as specified and directed by Engr-in-Charge ( Make- As per OEM Recommendation)

Material & Labour for replacement of full length IR Door screen sensor 12V /0.2 A with 20 number of diodes ,pattern of 96 cri-cross beam meeting the requirments of EN-81-20 with IP-65 rating and housed in slim aluminium profile suitable for 08/13 passengers lifts( make- M/S johnson lifts pvt.ltd) including tacking down old unserviceable one complete all as specified and directed (Make -As per OEM)

Taking down and supply & fixing in replacement Door Drive operator -Belt Driven Model with having PMSM door motor alongwith Encoder and VVVF drive closed loop suitabl for 08/13 passenger Johnson make lift complete with wiring all as specified and directed by engr-in -charge

Supply installtion,commissionig & testing of over speed governor unit including OSG wheel ,rope ,auto limit ,OSG tension weight unit wtc,along with connected accessories complete suitable for 08/13 passenger lifts(make of lift M/s Johnson Lifts Pvt. Lts.) serving (G+8) as per site requirement including taking down old unservicable one complete all as specified and directed.

Taking down and supply & Fixing ,installing,testing and commissioning in replacement alongwith all connected accesories for VVVF drive 11 KW, 380/480 Volts 50 HZ as per sample for Jhonson make lifts suitable for serving Ground + 8 Floors (total nine landings) with electric power operated doors, complete all as specified and directed by the Engineer-in-charge for 13 passenger lift. (Make :- Make: As per OEM recommendation)

Taking down and supply & Fixing ,installing,testing and commissioning in replacement alongwith all connected accesories for VVVF drive 7.5 KW, 380/480 Volts 50 HZ as per sample for Jhonson make lifts suitable for serving Ground + 8 Floors (total nine landings) with electric power operated doors, complete all as specified and directed by the Engineer-in-charge for 08 passenger lift. (Make :- Make: As per OEM recommendation)

Supply & fixing car door moving arm assembly suitable for 900mm door opening incl but bolts, washers complete suitable for 13 passenger Johnson make lift all as specified and as directed by Engineer-in-Charge. Make :- As per OEM recommendation

Supply & fixing car door moving arm assembly suitable for 800mm door opening incl but bolts, washers complete suitable for 08 passenger Johnson make lift all as specified and as directed by Engineer-in-Charge. Make :- As per OEM recommendation

Taking down and Material & labour for replacement of defective travelling cable PVC insulated flexible flat copper conductor of size 0.75sqmm 12 core and other connected accessories all as per site requirement and as directed by the Engineer-in-charge. ( Make- As per OEM Recommendation)

Taking down and supply & fixing in replacement new aluminium car door/ landing door sill of size 1700mm x 50mm x 30 mm deep for the 08 passenger Johnson lift complete all as specified and directed by Engr-in-Charge. ( Make- As per OEM Recommendation)

Taking down and supply & fixing in replacement new aluminium car door/ landing door sill of size 1800mm x 50mm x 30mm deep for the 13 passenger Johnson lift complete all as specified and directed by Engr-in-Charge. ( Make- As per OEM Recommendation)

Khairati Lal (BID ID -3201841)

ASSOCIATED CONSTRUCTION CO. (BID ID -3202000)

MODERN CONSTRUCTION CO (BID ID -3201962)

L G BUILDERS (BID ID -3202203)

India Guniting Corporation (BID ID -3202299)

Global Enterprises (BID ID -3201891)

Adhunik Builders (BID ID -3201944)

M/s Puja Construction Company (BID ID -3201594)

MODERN CONSTRUCTION CO (BID ID -3201962)

India Guniting Corporation (BID ID -3202299)

M/s Puja Construction Company (BID ID -3201594)

M/S Chhavi Constructions Co (BID ID -3202212)

L G BUILDERS (BID ID -3202203)

Khairati Lal (BID ID -3201841)

Global Enterprises (BID ID -3201891)

Adhunik Builders (BID ID -3201944)