CONSTRUCTION OF ROAD ADJACENT TO CANTEEN APPROACHING TO DM PLANT IN ALUMINA PLANT, NALCO, DAMANJODI.

Amount

2.8.1Earth work in Excavation in All kinds of soil.

2.28.1Surface dressing micro levelling in all types of soil other than rock to a depth not exceeding 15 cm including cutting and filling, levelling, ramming to the desired formation level. The work includes excavation in over areas and filling in low lying areas within a lead of 50 mtrs. as per instruction of Engineer- in-charge.

1.1.2Removal excavated materials upto 5km within Alumina Plant at low laying areas.

15.2.1Dismantling of cement concrete work including disposal of materials within 50 mtrs.lead as directed by E-I-C.

15.9.2Dismantling of masonry work including disposal of materials within 50 mtrs.lead as directed by E-I-C.

16.70.1P&F of GI chainlink fabric fencing made of GI wire of 4 mm dia of required width in mesh size 50 x 50 mm including strenthening with 2 mm dia wire and fixing with nuts with washers as required all complete as per the direction of Enginer-in-Charge.

4.1.8P/L P.C.C 1:4:8 (1 Cement: 4 Coarse sand: 8 Graded stone aggregates of 40mm nominal size)

4.1.3P/L P.C.C 1:2:4 (1 Cement: 2 Coarse sand: 4 Graded stone aggregates of 20mm nominal size)

5.1.2Providing and laying cement concrete1:1.5:3 ( Cement will be issued free of cost at Nalco's store).

5.9.1Centering and shuttering in foundation s,footings, bases columns,etc

5.22.4Transporting, Bending/binding and placing in position high yield deformed bars

13.1.2P&L 12mm thick cement plaster in cement mortar (1 cemnt : 6 sand).( CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE)

10.2(60%)+10.2(40%)Febrication & erection of structural steel work riveted,bolted or welded in built up sections trusses, column, purlinne with MS pipes, MS channel, MS plate, MS Boiler pipes, MS angle etc., and framed work, including cutting,hoisting,fixing in position and applying a prime coat of approved steel primer all complete. (All Structural steel materials will be supplied free of cost from NALCO's store point)

13.62.1Painting with synthetic enamel paint on steel surface of approved brand and manufacture to give an even shade. Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

16.47.1Painting runway/taxi truck/apron markingwith adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge,cleaning the surface of all dirt,scales,oil grease and other foreign material etc and lining out complete new work withTwo or more coat )

16.6Lettering with black japan paint of approved brand and manufacture to give an even shade including all tools , tackles, paints, labours & scafolding etc if required as per instruction of Engineer-in-charge.

M/S M H ZAMAN

M/s B.K.Jena

PRADIP KUMAR PATRO