55/W/EDC II/SRE/2024-25

Amount

Detail of Work

Safely carriage of ST poles 11 Mtr. Long from ESC, SRE to site of work including loading & unloading at both ends..

Safely carriage of other complete line material (Except ST Poles) from ESC, SRE to site of work including loading, unloading at both ends.

Safely carriage of 11 KV XLPE cable size 3x185 sq mm from ESC, SRE to site of work including loading & unloading at both ends..

Erection of double Pole on ST poles 11 Mtr Long with complete fitting with all accessories complete

Safely carriage of Fuse set from ESC, SRE, to the site of work by including loading & unloading at both ends.

Safely Fixing of fuse set properly.

Safely carriage of TPMO set from ESC, SRE, to the site of work by including loading & unloading at both ends.

Safely Fixing of TPMO set properly.

Providing of Nut and bolts OFF size.

Providing of Red oxide Paints (British/Asian/enamel paint)

Providing of Alluminium Paint (British/Asian/enamel paint)

Providing & Fixing GI Strip 25x3 mm

Providing & Fixing GI Strip 50x6 mm

Providing & Fixing GI Barbed wire

Providing and fixing of Number plate with clamp on the each pole.

Providing and Fixing 11 KV Danger board with clamp nuts & bolts. for ST Poles made of 3mm thick foam sheet (8" X 6") with

Providing of all type clamps with nuts and bolts made by MS flat size 50x6.

Earthing of poles by earthing rod

Concreting of ST pole with cement concreting in block of 600x600x1500 mm in ratio 1:4:8 with cement, sand and brick ballast size 1x1.5”

Laying, lifting, stringing, sagging jumpering & binding of ACSR Rabbit Conductor for 11KV/LT Line as per RESPO specification.

Painting of ST poles 11 Mtr, SP-55 with 2 coats of synthetic enamel paint after one coat of ready mix primer as well as rubbing/cleaning of surface as required for proper completion of work. and remaining by Aluminium paint including all channels/clamps etc.

Construction of Plinth for suitable 11 KV Ring main unit (RMU) including cost of brick Ist class Brick , sand, cement , concrete and labour and platring pf Plinth 12 mm thick as per resspo norms.

Providing & Installation on Plinth 11 Ring main unit (RMU) (2 Isolator+3Breaker as per Resspo Norms.

Fencing of 11 KV Ring main Unit (RMU) for suitable as per resspo Norms.

Laying of 11 KV XLPE cable 3X185sq mm

Fixing of 11 KV cable jointing Indoor/Outdoor kit 3x185sq mm

Fabrication charges of Angle & Channal

Chemical Earthing for DTR and connecting with G.I Stirp of size 25x3/50x6 mm Complete Properly.

GYAS PAL CONTRACTOR (BID ID -4707931)

M/s Raj Kishor Contractor (BID ID -4707980)