Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹47.3 LAccepted-AOC | L-1 | Accepted-AOC Lowest Bidder | |
| 2 | L-2₹49.6 L+₹2.3 L (4.78%)Rejected-Finance H NO 177 GOVINDPURA SATWARI JAMMU CANTT 180003 J K | JAMMU | JAMMU AND KASHMIR | 180003 | L-2 | Rejected-Finance Other than lowest bidder | |
| 3 | L-3₹53.7 L+₹6.4 L (13.4%)Rejected-Finance | L-3 | Rejected-Finance Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹99,600
Closing Date
11 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Jammu
GE Jammu c/o 56 APO Pin-900277
REHABILITATION OF TEMPORARY BUILDINGS INCLUDING GALVALUME SHEET AND ROOF IN OTM ACCN AT SK LINES AREA AT MIRAN SAHIB UNDER GE JAMMU
2022_MES_569746_2
GEJC-60/2022-23
Open Tender
Civil Works
Item Rate
240 days
AoR of GE Jammu
Please refer Tender Documents
9 documents required · 9 mandatory
₹500
GE Jammu
₹99,600
Yes
24 Feb 2023
23 Jan 2023
13 Feb 2023
23 Jan 2023
11 Feb 2023
30 Jan 2023
Amount
Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets, any thickness, any type including cover fillets complete all as specified and as directed.
Material and labour for providing and fixing in position suspended false ceiling system using 'E' grid suspended ceiling grid system. The size of grid shall be 600 X 600mm with GI frame work, main runner 39 X 24mm, cross tee 29 X 24mm and wall angle 22.2 X 22.2mm using 4 mm thick high pressure stream cured non premiered classic / designer variant E-Board ISI marked IS No 14862-2000. Fibre cement 'E' board to be placed in the gird of 'E' grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers from the purlins of the roof with butterfly clips complete all as specified and as directed.
Dismantling unframed work timber scantling 40 Sq.cm and over in section in any position as in unframed work complete all as specified and as directed.
Dismantling timber scantling in fillets, posts, rafters, purlins etc under 40 Sq.cm in section complete all as specified and as directed.
Demolition of brickwork / stone masonary built in cement mortar including all quoins, arches, pillars but excluding precast concrete articles complete all as specified and as directed.
Material and labour for brick work with sub class 'B' old size brick straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) complete and fixed all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
Suppy and fixing structural steel work as in roof trusses (framed), post, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections or mild steel tube pipe) including distance pieces, cleats etc Fe-410W (Grade 'E'-250) quality 'A' including shop coat of primer complete all as specified and as directed.
Supply and fixing steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed.
Supply and fixing plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment as in gusset plate, base plate etc Fe-410W (grade E-250) complete all as specified and as directed.
Dismantling AC corrugated, semi corrugated sheets in roof covering including ridge complete all as specified and as directed.
Material and labour for Asbestos cement sheeting 6mm thick, corrugated or semi-corrugated sheets in roofs, wall etc. fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed.
Material and labour for Asbestos cement two piece adjustable serrated ridge 6mm thickness to suit corrugated or semi corrugated sheets fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed.
Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws or L-type or J-type or cranked hook bolts complete all as specified and as directed.
Supply and fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge of roof fixed with self tapping screws or L-type or J-type or cranked hook bolts complete all as specified and as directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.
Material and labour cement plaster 10 mm thick in cement mortar (1:4) on concrete surface such as soffits of RCC slab, chajja, roof projection etc finished even and smooth without using extra cement including mixing of water proofing compound complete all as specified and as directed by Engineer-in-Charge of height upto 12 metre. Note: - Water proofing compound shall be measured and paid separately.
Material and labour for 15 mm thick rendering in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for 15 mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and fair without using extra cement including mixing of water proofing compound complete all as specified and as directed. Note: - Water proofing compound shall be measured and paid separately.
Material and labour for preparation of new / old surface and applying two coats of oil bound distemper over and including a coat of wall putty 1 mm complete all as specified and as directed.
Material and labour for preparation of new / old plastered surface and applying two coats of cement based paint including one coat of alkali resistant primer surface complete all as specified and as directed.
Material and labour for preparing surface of new steel of any description over 10cm width and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
Material and labour for preparing surface of old steel material of any description over 10 cm width or girth treated with one coat of synthetic enamel paint complete all as specified and as directed.
Taking up or down and supply and fixing 15 mm bore steel tubing, medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and water tightness test as directed by Engineer-in-Charge.
Taking up or down and supply and fixing 20 mm bore steel tubing, medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and water tightness test as directed by Engineer-in-Charge.
Dismantling water tanks and removing to store and supply and fixing 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layers hoisted and fixed in position over and including 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge. Water tanks exceeding 250 and not exceeding 500 litres complete all as specified and as directed.
Dismantling water tanks and removing to store and supply and fixing 1000 litres capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position over and including 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge. Water tanks exceeding 500 and not exceeding 1000 litres complete all as specified and as directed.
Supply and fixing in repairs gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and as directed.
Supply and fixing in repairs gun metal, globe or gate valve with iron wheel head, 15 mm bore, screwed both ends for iron pipe complete all as specified and as directed.
Material and labour for provision of roof treatment with polymeric water proofing membrane all as given below: - (a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. (b) Material and labour for plastering 10 mm thick in cement mortar (1:3) (using 100% coarse sand) on roof surface including water proofing compound as per manufacturer's instructions and as directed by Engineer-in-Charge. (c) Applying a coat of bituminous primer conforming to IS : 3384-1986 @ 0.25 Iitres / Sqm on prepared surface and allowed to dry. (d) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar (1:3). (e) Material and labour for cement concrete tiles 25 cm x 25 cm x 20 - 22mm thick, machine pressed, set, jointed and pointed in neat cement slurry as in floors / terraces over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.
Material and labour for provision of roof treatment with polymeric water proofing membrane all as given below: - (a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. (b) Material and labour for plastering 10mm thick in cement mortar (1:3) by using 100% coarse sand on roof surface including water proofing compound as per manufacturer's instructions and as directed by Engineer-in-Charge. (c) Applying a coat of bituminous primer conforming to IS : 3384-1986 @ 0.25 Iitres / Sqm on prepared surface and allowed to dry. (d) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10 cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar (1:3). (e) Material and labour for two coats of aluminium paint on membrane surface all as specified and directed.
Supply only liquid water proofing compound complete all as specified and directed.
Taking down eaves gutters and rain water pipes (any size or pattern), including supply and fixing 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height all as specified and as directed by Engineer-in-Charge.
Taking down eaves gutters and rain water pipes (any size or pattern), including supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair PVC (SWR) bends 110 mm radius complete all as specified and as directed.
Supply and fixing in repair 110 mm PVC (SWR) junction single (T) equal / unequal complete all as specified and as directed.
Supply and fixing in repair PVC (SWR) bends / shoes any radius of 75 mm dia complete all as specified and as directed.
Supply and fixing in repair PVC (SWR) bends any radius provided with access door of 110mm dia complete all as specified and as directed.
Supply and fixing in repair PVC (SWR) bends any radius provided with access door of 75mm dia complete all as specified and as directed.
Material and labour for 75mm thick PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection etc finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in roof kerbs rounded or chamfered on edges complete all as specified and as directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for cement concrete complete all as specified and as directed.
Material and labour for mild steel TMT bars 10 mm dia and over cut to length, bend to shape etc complete binding with and including mild steel annealed wire not less than 0.09 mm dia conforming TMT bars complete all as specified and directed.
Description all as per Ser Item No 43.00 here-in-before but 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.
Material and labour for formwork to square, rectangular or polygonal sides of pillars, posts, struts, piers, columns and stanchions fair finihsed complete all as specified and as directed.
Material and labour for reinforced cement concrete (nominal mix) (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) in columns, pillars, piers, posts and struts and the like complete all as specified and directed.
NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.
M/S A TO Z ENGINEERS
M/S PRITHIVI RAJ AND SONS
Bidder Name
PAKAYA BUILDERS AND DEVELOPERS PVT LTD
M/S PRITHIVI RAJ AND SONS
M/S A TO Z ENGINEERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .