Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.6 LAccepted-AOC | L1 | Accepted-AOC lowest and reasonable bid | |
| 2 | L2₹18.8 L+₹8,835.30 (0.47%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹19.6 L+₹89,355.30 (4.77%)Rejected-Finance KHASRA NO 716 POONIYON KI DHANI MEULASAR NAGAUR RAJ 341506 | NAGAUR | RAJASTHAN | 341506 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹21.0 L+₹2.3 L (12.1%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹22.8 L+₹4.0 L (21.5%)Rejected-Finance NEW ABADI KISHANPURA SURATGARH 335804 DISTT SRIGANGANGAR RAJ | GANGANAGAR | RAJASTHAN | 335804 | L5 | Rejected-Finance Other than lowest |
| Sl No | Description | Qty | Unit | M/s JUGAL KISHORE MISHRA AND SONS L5 | AK CONSTRUCTION L6 | GURUJI ENTERPRISES L1 | RATHORE ENTERPRISES L7 | M/S SHRI RAM CONSTRUCTIONS L3 | Bhawani Enterprises L4 | MISHRA CONSTRUCTION COMPANY L2 |
|---|---|---|---|---|---|---|---|---|---|---|
| .01BOQ (PERIODICAL SERVICES AND B/R ALLIED WORKS IN DOMESTIC AREA, MARU VIHAR AT AF STN SURATGARH) | ||||||||||
| 1.00 | M&L for Preparation of old plastered or unplastered decorated surface of ceiling and applying one coat of OBD. Complete all as specified and directed. | 1,000 | Sqm | 23.8 ₹23,800 Lowest | 25 ₹25,000 | 30.01 ₹30,010 | 40 ₹40,000 | 25 ₹25,000 | 25 ₹25,000 | 25 ₹25,000 |
| 2.00 | M&L for preparation of old surfaces plastered or unplastered and applying one coat of oil bound distemper on walls surfaces for smooth finishes complete all specified and directed. | 13,000 | Sqm | 39 ₹5,07,000 | 25 ₹3,25,000 | 28 ₹3,64,000 | 40 ₹5,20,000 | 25 ₹3,25,000 | 24 ₹3,12,000 | 22 ₹2,86,000 Lowest |
| 3.00 | M&L for preparation of old surfaces plastered or unplastered and applying one coat of white wash as on ceiling. Complete all as specified and directed. | 8,100 | Sqm | 6 ₹48,600 Lowest | 10 ₹81,000 | 25 ₹2,02,500 | 15 ₹1,21,500 | 7 ₹56,700 | 10 ₹81,000 | 12 ₹97,200 |
| 4.00 | M&L for preparation of old surfaces plastered or unplastered and applying one coat of white wash on old plastered wall surface for smooth finishes complete all as specified and directed. | 3,600 | Sqm | 5 ₹18,000 Lowest | 10 ₹36,000 | 22 ₹79,200 | 15 ₹54,000 | 7 ₹25,200 | 10 ₹36,000 | 15 ₹54,000 |
| 5.00 | M&L for 2mm thick wall care putty on old plastered surface to achieve fair finish surface and applying two coats of oil emulsion distemper to achieve smoth finish surface. Complete all as specified and directed. | 11,000 | Sqm | 56.8 ₹6,24,800 | 65 ₹7,15,000 | 33 ₹3,63,000 Lowest | 82 ₹9,02,000 | 44 ₹4,84,000 | 60 ₹6,60,000 | 40 ₹4,40,000 |
| 6.00 | M&L for preparing old painted surfaces of steel and iron surfaces, over 10 cm in width or girth by cleaning, sand papering, brushing with wire brushes, scrapping by steel scrappers etc, filling in crevices and cracks etc. with approved filler and applying one coat of synthetic enamel paint complete all as specified and directed. | 3,300 | Sqm | 35 ₹1,15,500 | 30 ₹99,000 | 50 ₹1,65,000 | 50 ₹1,65,000 | 40 ₹1,32,000 | 30 ₹99,000 | 28 ₹92,400 Lowest |
| 7.00 | M&L for preparation of old painted surfaces, of wood and wood based material of any description over 10cm width or girth by cleaning, sand papering, brushing etc, filling in crevices and cracks etc with approved filler and applying one coat of synthetic enamel paint complete all as specified and directed. | 4,000 | Sqm | 35 ₹1,40,000 | 30 ₹1,20,000 Lowest | 45 ₹1,80,000 | 50 ₹2,00,000 | 40 ₹1,60,000 | 30 ₹1,20,000 Lowest | 45 ₹1,80,000 |
| 8.00 | M&L for applying two coats of exterior acrylic emulsion of approved quality, in camouflaging patterns, after complete removal of old finishes. Complete all as specified and directed. | 1,000 | Sqm | 37 ₹37,000 | 80 ₹80,000 | 33 ₹33,000 Lowest | 65 ₹65,000 | 50 ₹50,000 | 40 ₹40,000 | 50 ₹50,000 |
| 9.00 | Taking down cement or cement lime plaster on brick or stone walls including raking out joints/hacking for key, scrubbing down with water etc complete all as specified and as directed by Engr-in-Charge | 1,250 | Sqm | 18 ₹22,500 | 25 ₹31,250 | 20 ₹25,000 | 40 ₹50,000 | 10 ₹12,500 Lowest | 20 ₹25,000 | 12 ₹15,000 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
14 Aug 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF SURATGARH
GE AF SURATGARH
PERIODICAL SERVICES AND B/R ALLIED WORKS IN DOMESTIC AREA, MARU VIHAR AT AF STN SURATGARH
2025_MES_720547_1
8257/E8
Open Tender
Civil Works
Item Rate
240 days
GE AF SURATGARH
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE AF SURATGARH
₹70,000
Yes
23 Sept 2025
15 Jul 2025
16 Aug 2025
15 Jul 2025
14 Aug 2025
30 Jul 2025
Amount
BOQ (PERIODICAL SERVICES AND B/R ALLIED WORKS IN DOMESTIC AREA, MARU VIHAR AT AF STN SURATGARH)
M&L for Preparation of old plastered or unplastered decorated surface of ceiling and applying one coat of OBD. Complete all as specified and directed.
M&L for preparation of old surfaces plastered or unplastered and applying one coat of oil bound distemper on walls surfaces for smooth finishes complete all specified and directed.
M&L for preparation of old surfaces plastered or unplastered and applying one coat of white wash as on ceiling. Complete all as specified and directed.
M&L for preparation of old surfaces plastered or unplastered and applying one coat of white wash on old plastered wall surface for smooth finishes complete all as specified and directed.
M&L for 2mm thick wall care putty on old plastered surface to achieve fair finish surface and applying two coats of oil emulsion distemper to achieve smoth finish surface. Complete all as specified and directed.
M&L for preparing old painted surfaces of steel and iron surfaces, over 10 cm in width or girth by cleaning, sand papering, brushing with wire brushes, scrapping by steel scrappers etc, filling in crevices and cracks etc. with approved filler and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted surfaces, of wood and wood based material of any description over 10cm width or girth by cleaning, sand papering, brushing etc, filling in crevices and cracks etc with approved filler and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for applying two coats of exterior acrylic emulsion of approved quality, in camouflaging patterns, after complete removal of old finishes. Complete all as specified and directed.
Taking down cement or cement lime plaster on brick or stone walls including raking out joints/hacking for key, scrubbing down with water etc complete all as specified and as directed by Engr-in-Charge
M&L for 15 mm thick rendering in cement morter 1:4 mixed with approved water proofing compound on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement all as specified and directed. Note :Water proofing compound shall be measured & paid seprately.
M&L for rendering 15mm thick plaster on brick or concrete surfaces in cement mortor (1:6) finished the surface even and smooth without extra cement as intrnal surfaces of wall complete all as specified.
M& L Rough cast plaster over and including 10 mm thick rending in CM 1:4 as base coat on external surfaces of brick work finished even and fair complete all as specified.
M&L for rendering 5 mm thick in CM 1:3 on fair faces of brick work or concrete ceiling surfaces, finishing even and smooth without using extra cement complete all as specified and as directed by the Engr-in-Charge
Supply only integral water proofing compound (ISI marked), complete all as specified and directed.
M&L for preparation of new plastered of wall and applying two coats of exterior acrylic emulsion paint of approved quality, in camouflaging patterns, over new plastered surfaces , including applying a coat of primer new surfaces ,complete all as specified and directed.
M&L for applying two coats of distemper oil emulsion over 2mm thick putty on newly plastered surfaces on wall including preparation of surfaces complete all as specified
M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.
M&L for preparation of old painted surface of any description and applying two coats of textured paint of any colour and design over and including a layer of 3 to 4mm thick POP to achive desired finished surface, complete all as directed.
Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each complete all as specified and directed.
S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted as per specification & drawing and as per manufacturer's instructions ,complete all as specified and directed by the Engineer in Charge.
S&F Factory made solid panel PVC door shutter30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified and directed.
M & L for factory made steel windows box type using ERW hollow 'P' section comprising double frame for glazed and gauged skelton shutters jointed interally with flat iron 40x4 mm complete including grill of 10 mm square bar, fixed horizontally @ 10cm centre to centre hinges, handle, tower bolts, lugs etc with / Without cooler Provision complete as all specified and directed. Note:- (i) For the purpose of measurement and payment double shutter with frame shall be consider as one unit. (ii) Glazing and wire mesh shall be measured and paid for separatley in respective of item.
M & L Factory made box type steel section ventilators, fixed type with glazing bars @ 10 mm square bar @ 10 cm c/c and with one shop coat of zinc chromate primer,complete all as specified and directed by the Engineer in Charge.
S & F powdered coated glazed three track sliding window of frame 100*44*1.5mm thickand sliding shutter of section 40*19mm including 3 mm thick sheet glass ordinary quality exceeding 0.5 sqm in each pane, in two trackshutter and in one track stainless steel wire cloth , .56 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with stainless steel staples including all fitting such as aluminium handle of size 100mm and locking arrangments with each moving leaf aluminium jali ,aluminium deco grill (size of deco grill as per instruction of engineer in charge) complete all as specified and directed by the engineer in charge.
M & L for Preparing new or previously untreated steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer , complete all as specified and directed by Engineer-in-Charge.
S/F in repir Stainless steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete.
S&F 3 mm thick plain sheet glass ordinary quality & glazing with oil putty in square n exc 0.50sqm in each pane
S&F in repairs aluminium handle,150mm size cast type, anodised, ISI marked .
S&F in repairs aluminium tower bolts, 150mm size cast type, anodised, ISI marked .
S&F mild steel cold rolled butt hinges of size 100mm, medium weight,complete all as specified and directed.
S& F 8 mm thick sheet glass shelfs properly grinded / rounding edges with smooth finishes fixed to existing wall with necessary stainless steel support & screws etc complete all as specified and directed
M&L of Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors. Complete all as specified and directed.
M&L ATT voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing wall.complete all as specified and directed.
M&L ATT points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same . Complete all as specified and directed.
Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents.
MISHRA CONSTRUCTION COMPANY (BID ID -3380844)
M/S SHRI RAM CONSTRUCTIONS (BID ID -3381864)
Bhawani Enterprises (BID ID -3382424)
M/s JUGAL KISHORE MISHRA AND SONS (BID ID -3386339)
AK CONSTRUCTION (BID ID -3386384)
RATHORE ENTERPRISES (BID ID -3393369)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .