Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.1 CrAccepted-AOC | ₹1.1 Cr | L1 | Accepted-AOC Bidder is L1 |
| 2 | L2₹1.2 Cr+₹7.9 L (7.15%)Rejected-AOC | ₹1.2 Cr+₹7.9 L (7.15%) | L2 | Rejected-AOC Bidder is L2 |
| 3 | L3₹1.2 Cr+₹12.5 L (11.3%)Rejected-AOC | ₹1.2 Cr+₹12.5 L (11.3%) | L3 | Rejected-AOC Bidder is L3 |
| 4 | L4₹1.6 Cr+₹48.0 L (43.4%)Rejected-AOC | ₹1.6 Cr+₹48.0 L (43.4%) | L4 | Rejected-AOC Bidder is L4 |
| Sl No | Description | Qty | Unit | KAMAL AGGARWAL L3 | COSMO BUILDERS L2 | R. P. Suppliers and Construction Co. L4 | Gurjit const co L1 |
|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed . | 1,552.5 | Sqm | 22 ₹34,155 | 14 ₹21,735 | 25 ₹38,812.5 | 10 ₹15,525 Lowest |
| 2.00 | M&L for glazed ceramic coloured tiles in vertical surfaces of size 450x300x7mm thick, set and jointed in neat cement slurry pointed in white or colour cement to match the colour, over and including 10 mm thick rendering on fair faces of brickwork in (1:4) complete all as specified and directed . | 1,552.5 | Sqm | 810 ₹12,57,525 | 799 ₹12,40,447.5 | 850 ₹13,19,625 | 750 ₹11,64,375 Lowest |
| 3.00 | M&L for non skid ceramic tiles coloured tiles 7-8 mm thick (square/rectangular) polished, area of each tile exe 0.11sqm not exc 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, over and including 15 mm thick cement screed bed in CM (1:6), complete all as specified and directed. | 303.75 | Sqm | 780 ₹2,36,925 | 799 ₹2,42,696.25 | 850 ₹2,58,187.5 | 700 ₹2,12,625 Lowest |
| 4.00 | M&L for epoxy grout/ epoxy resin with property of water resistance, stain resistance for filling in the voids of wall and floor tile joints of width 2-3 mm, 10mm deep, complete, all as specified and directed. | 1,210 | Sqm | 120 ₹1,45,200 | 49 ₹59,290 | 250 ₹3,02,500 | 40 ₹48,400 Lowest |
| 5.00 | Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing off the premises,complete, all as specified and directed. | 10 | Cum | 500 ₹5,000 | 199 ₹1,990 | 150.09 ₹1,500.9 Lowest | 200.1 ₹2,001 |
| 6.00 | M&L for Brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4, complete, all as specified and directed. | 10 | Cum | 4,200 ₹42,000 | 3,950 ₹39,500 | 4,500 ₹45,000 | 3,500.05 ₹35,000.5 Lowest |
| 7.00 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. | 3,850 | Sqm | 25 ₹96,250 | 19 ₹73,150 | 25 ₹96,250 | 10 ₹38,500 Lowest |
| 8.00 | M & L for rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified. | 1,500 | Sqm | 250 ₹3,75,000 | 199 ₹2,98,500 | 250 ₹3,75,000 | 190 ₹2,85,000 Lowest |
| 9.00 | M&L for 15mm thick rendering in CM 1:4 on brick work or concrete surfaces with water proofing compound finished even and smooth etc complete all as specified and directed.
Note: WPC shall be paid measured & paid separately under respective item. | 2,000 | Sqm | 275 ₹5,50,000 | 219 ₹4,38,000 | 250 ₹5,00,000 | 200 ₹4,00,000 Lowest |
| 10.00 | M&L for 5mm thick rendering in CM 1:3 on brick work or concrete surfaces as in ceiling etc complete all as specified and directed. | 350 | Sqm | 220 ₹77,000 | 200 ₹70,000 | 250 ₹87,500 | 150 ₹52,500 Lowest |
Tender Value
₹1.5 Cr
EMD Value
₹2.2 L
Closing Date
15 Nov 2025, 6:05 pmClosed
CWE Jalandhar Cantt
HQ CWE Jalandhar Cantt PIN 144005
REPAIRS TO ROOF LEAKAGE SEEPAGE and SUNKEN PORTION AND CERTAIN BR AND EM REPAIRS IN BLDGS AT NEW MILITARY STATION KAPURTHALA
2025_MES_724536_2
8325/52/E8
Open Tender
Civil Works
Item Rate
180 days
HQ CWE Jalandhar Cantt
Class B Category a (i) for contractors enlisted with MES
9 documents required · 9 mandatory
₹1,000
Yes
GE Kapurthala
₹2.2 L
Yes
16 Dec 2025
3 Nov 2025
17 Nov 2025
3 Nov 2025
15 Nov 2025
10 Nov 2025
Amount
Dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed .
M&L for glazed ceramic coloured tiles in vertical surfaces of size 450x300x7mm thick, set and jointed in neat cement slurry pointed in white or colour cement to match the colour, over and including 10 mm thick rendering on fair faces of brickwork in (1:4) complete all as specified and directed .
M&L for non skid ceramic tiles coloured tiles 7-8 mm thick (square/rectangular) polished, area of each tile exe 0.11sqm not exc 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, over and including 15 mm thick cement screed bed in CM (1:6), complete all as specified and directed.
M&L for epoxy grout/ epoxy resin with property of water resistance, stain resistance for filling in the voids of wall and floor tile joints of width 2-3 mm, 10mm deep, complete, all as specified and directed.
Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing off the premises,complete, all as specified and directed.
M&L for Brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4, complete, all as specified and directed.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.
M & L for rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified.
M&L for 15mm thick rendering in CM 1:4 on brick work or concrete surfaces with water proofing compound finished even and smooth etc complete all as specified and directed. Note: WPC shall be paid measured & paid separately under respective item.
M&L for 5mm thick rendering in CM 1:3 on brick work or concrete surfaces as in ceiling etc complete all as specified and directed.
Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area not exc 1.50 sqm each complete all as specified and directed.
S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening complete all as specified and directed.
S&F solid panel factory made PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification, drawing and as directed.
S&F Alumunium hinges for PVC door shutter, size of hinges 100mm, complete, all as specified and directed.
S&F Aluminium anodised barrel tower bolts of extruded section and fixed, length of bolt 200mm, complete, all as specified and directed.
S&F extruded aluminium alloys handles frabicated type anodized of size 150mm long, complete, all as specified and directed.
S&F Anodised aluminium frame, powder coated for ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
S&F Anodised aluminium ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified & directed.
S&F 4.00mm thick figured glass, pinhead type in squares n exc 0.5 sqm each pane and glazing with oil putty, complete, all as specified and directed.
S&F glavanised MS wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.00mm and fiexed with tinned tacks or galvanised wire staples complete all as specified and directed by Engr-in-Charge
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distermper over and including a coat of 3 mm thick wall care putty, complete all as specified and directed.
M & L for preparation of newly plastered or unplastered wall surface and applying two coats of cement base paint over and including a coat of primer, complete all as specified and directed.
M&L for preparation of new plastered surfaces of ceiling and applying two coats of white wash on ceiling over a coat of white wall care putty complete all as specified and directed.
Supply and applying high built elastomeric waterproofing coating based on pure hydrophobic polyurethane cold applied of spray/brush applied, membrance with an elongation of 280% and tensile strength of 2.7 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes cleaning of surface and made free from dust for final base prepration, epoxy primer 1: (resin; harder) application with 100% water dilution and pure polyurethane appliction in 2 coats with a tortal min consumption of 1.25 kg per Sqm. Appliction should be done with Graco sprayer by a company autorised applicator with guarantee period of 10 years, complete, all as specified & directed.
M&L for cleaning the surface and made free of vegetation, dirt, foreign particles, liatance all as specified and directed.
M&L for providing GI pipe 40mm 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete, all as specified and directed.
M&L for PCC (1:5:10) type E2 using 40mm graded aggregate as in sub base complete all as specified and directed by Engineer-in-charge.
M&L for 40 mm thick PCC type B-0, 1:2:4 using 12.5mm graded crushed stone aggregate, as in receiving top finishing layer of ceramic tiles for sunken portion, finished even and smooth without using extra cement, complete, all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed.
Taking down GI tubing & connection 15mm dia laid in floor / trenches or fixed to walls complete all as directed by Engineer-in-Charge.
S & F CPVC pipes CPVC PIPE OUTER DIAMETER 16mm, SDR 11 & Plain CPVC SDR 11 fittings complete all as specified and directed.
Taking down GI tubing & connection 20mm dia laid in floor / trenches or fixed to walls complete all as directed by Engineer-in-Charge.
S & F CPVC pipes CPVC PIPE OUTER DIAMETER 20mm, SDR 11 & Plain CPVC SDR 11 fittings, complete, all as specified and directed.
S&F in repairs 15 mm bore CP bib taps fancy type cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed, complete, all as specified and directed.
S&F in repairs 15mm dia stop/angle valve, CP cast copper alloy with crutch or butterfly handle. Screwed down high pressure, screwed both ends for iron pipe and fixed, complete all as specified and directed
S&F in repairs vitreous china squatting pan Orissa pattern wash down water closet of size 580x440 mm, white, with integral foot rests complete fixed in repairs with P or S trap, including PVC flushing cistern low level of 10 ltrs capacity including brackets for flush tank, PVC flush pipe and all necessary fittings etc, complete, all as specified and directed.
S&F in repairs Vitreous China wash down Water closet pan (pedestal pattern) with plastic closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated hinging divice (excluding flusing cistern and flush pipe) in repairs complete all as specified and directed.
S&F in repairs PVC(SWR) floor trap with grating and diameter of outlet 75mm including jointing to waste pipe fixed with solvent cement complete all as specified and directed.
S&F in repairs fancy type chromium plated stop valves of 15 mm bore with long shank and cup (concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.
S&F in repairs shower rose 100mm with CP arm of chromium plated any colour or fixing with 15mm pipe (minimum weight 40gm) complete all as specified and directed.
Cutting chases pinning in brick/stone/blocks masonary in making good to facings where required and pointing in CM (1:3) to ends or eges of steps, cills, sun shades, shelves, lintel etc and cutting chases for concealed water tubing or etc and making good complete all as specified and directed.
Taking down rainwater pipes including all fittings as specified and directed.
Dismantling of cast iron pipe any diameter jointed with cement mortar or lead incl all fittings from wall or floors, complete, all as specified and directed.
S&F 75 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as directed.
S&F 75 mm PVC (SWR) pipes in repair single socketed in any length laid in floor complete, all as specified and directed .
S&F 75 mm PVC (SWR) bend , complete, all as specified and directed .
S&F 75 mm PVC (SWR) junction single,(single T) equal or unequal with access door, complete, all as specified and directed .
S&F 110 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls, complete, all as specified and directed .
S&F 110 mm PVC (SWR) bend, complete, all as specified and directed .
S&F 75mm PVC(SWR) vent cowl, complete, all as specified and directed .
Dismantling PVC water tank of capacity 500 Ltr and S&F new rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top), double layered, ISI marked, hoisted and fixed in position all as specified including Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight for 20mm-210 gms) complete, screwed for iron pipe or brass ferrule and fixed, Complete all as specified and directed.
S&F in repairs gun metal globe and gate valve with iron welded hand secrewed both and for iron pipe 20mm, complete, all as specified and directed.
S&F in repairs gun metal globe and gate valve with iron welded hand secrewed both and for iron pipe 15 mm, complete, all as specified and directed.
S&F in repairs Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight for 20mm-210 gms) , complete, all as specified and directed.
Dismantling of brick tiles or terracing tiles laid bedded and pointed in cement mortar in single layer on roofs, complete, all as directed.
Demolition of mud in roof, any thickness including plastering & leeping removed, complete, all as directed.
M&L for rendering 10mm thick in cement mortar 1:3 mixed with water proofing compound @ 3% by weight of cement or as per manufacturer's instructions, on fair faces of concrete surface, finished even and smooth, complete, all as specified & directed. Note:- WPC shall be measured and paid seprately under respective item.
Supply only integral water proofing compound, ISI marked.
Preparation of newly plastered surface making surface completely dry and applying a coat of bitumen primer @ 0.40 ltr/sqm and after drying of primer apply APP modified water proofing membrane with non woven polyster reinforcement 3mm thick superior multi polymeric weighing not less than 3kg/sqm with properties of high penetration and centre core consisting of 90 micron high molecular high density polyethylene (MHHDPE) film consisting of five layers with a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm under and over the APP membrane laid with torching application to the surface complete and sealing the side as well as end laps (overlaps should not be less than 10 cm) as in roof slab and sunken portion, complete all as specified and directed.
M&L for 40mm thick brick tiles laid on and including 15mm thick screed bed in cement mortar 1:3 with jointing and pointing in cement mortar (1:3) mixed with 5% crude oil by weight of cement, complete, all all as specified and directed.
All as per item no 60 above but except brick tiles.
M&L for 50 mm thick Cement concrete type B1, 1:2:4 using 20 mm graded crushed stone aggregate as in PCC padding over roof slab, finished even and smooth without using extra cement, complete all as specified and directed.
M&L for cement concrete type B0, 1:2:4 using 12.5mm graded crushed stone aggregates as in roof kerbs, rounded or chamfered edges complete all as specified and directed.
Taking down aluminium point wiring for light, fan, bell socket, power socket etc complete including fittings and fixtures removing from site and making good disturbed surfaces of walls, floors, etc complete all as directed.
M&L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC (FRLS) insulated cable in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.5 Sqmm insulated un-sheathed PVC insulated copper conductor common earth and connecting to earth dolly for :-
One light point controlled by one, one way switch
One fan point controlled by one, one way switch
One socket outlet 3 Pin, 5 Amp on independent board
One socket outlet 3 Pin, 5 Amp on same board.
M&L for point wiring with 2.50 Sq mm single core multi-stranded copper conductor PVC (FRLS) insulated, unsheathed cable 1100 volt grade in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated 4 mm sheet top cover with 2.50 Sq mm single core, multi-stranded copper conductor, PVC insulated, unsheathed cable for common earth and connecting for earth dolly for 5 pin, 15 Amp socket outlet on Independent board, complete, all as specified & directed.
S&F switch piano flush type single pole one way 5 Amp (ISI Marked)
S&F switch piano flush type single pole one way 15 Amp (ISI Marked)
S&F socket out let 2 in 1, 3 pin 5 Amp flush type (ISI Marked)
S&F socket out let 2 in 1, 3 pin 15 Amp flush type (ISI Marked )
M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body (ISI Marked)
Taking down old unserviceable flourescent tube light fitting 36/40 watt fluorescent tube light fittings direct to walls or roof as ordered and disconnecting electrically with the electrical system and all materials required for the same. The rates also include making good the same to match with the existing surface.
S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Taking down old unserviceable lamp holder and S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.including LED lamp 09 Watt, complete, all as specified & directed.
COSMO BUILDERS (BID ID -3475213)
KAMAL AGGARWAL (BID ID -3474367)
R. P. Suppliers and Construction Co. (BID ID -3475264)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.25 MB
Tenderdocus.pdf
Tender Documents • 2.16 MB
BOQ_826598.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .