REPAIRS REPLACEMENT OF FALSE CEILING DOORS WINDOWS VENTILATORS SANITARY FITTINGS STORM WATER DRAINS PARKING AREA HARD STANDING FLOORS FOOTPATH BOUNDARY COMPOUND RETAINING WALLS CULVERTS FENCING GATE ETC AT VARIOUS LOCATIONS IN INS TUNIR AREA AT NSK

Amount

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and as directed.

Demolition of brick work or stone/boulder, masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but exceeding ashlar facing and pre-cast concrete articles complete all as specified and as directed.

As per srl item No. 2 here- in-before but pre-cast concrete block walling complete all as specified and as directed.

M&L for walling of random rubble, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6 all as specified and directed.

All as per item No. 4 hereinbefore but except stone. Note:- stone obtained from item No.2 shall be reused.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of RR wall brought upto courses, maximum depression n.exc. 20mm in granite or trap stone complete all as specified and directed.

M&L for pre-cast cement concrete block masonry with solid blocks in 10cm in width in type B1 (1:2:4) and setting in mortar (1:6) complete all as specified and as directed.

M&L for raised pointing to random or polygonal rubble masonry uncoursed or brought upto course in CM (1:4) complete all as specified and directed.

M&L Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre means radius built in cement mortar 1:4 complete all as specified and as directed.

Rendering 15 mm thick in cement mortar 1: 6 on fair faces of brick work or concrete surfaces, finished fair and even complete.

M&L 20mm thick rendering in cement mortar (1:4) on brick/concrete surfaces of walls, finished even & smooth surfaces without using extra cement complete all as specified.

M & L for cement concrete 1:2:4 type B2 (using 40mm graded stone aggretate) as in surface channel or drain complete all as specified and directed.

Extra for forming fair finishes for drain or channels upto 80cm inner girth in cement concrete using extra cement including forms, moulds etc complete all as specified and as directed.

Dismantling of barbed wire and rolled in bundle & remove from site complete all as specified and directed.

S&F in Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and strained and fixing to any type of standard rails straining bolts, etc. all as directed.1 each line wire to be measured) complete all as specified and as directed.

Ditto all as per Srl item No.15 but fixing only in repairs complete all as specified and as directed.

S & F in repair wire barbed tape concertina coil wire of 50 turn, 610 mm high having core wire of high carbon spring steel of high tensile strength and a carbon steel strip of 20mm width, 0.5mm thick having razor sharp barbs punched tape and core wire hot dip galvanized, as fixed in repair complete all as specified an directed Note : (i) Concertina coil shall be fitted to the angle iron with barbed wire. (ii) Barbed wire will be mesured and paid separately. (iii) There will be minimum 8 loops per running meter after fixing concertina coil.

M&L for preparation of new or previously untreated plastered surfaces of walls and applying two coats of acrylic antifungal paint exterior grade paint on one coat of primer complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed

M&L for PCC of type D2, 1:4:8 using (40mm graded stone aggregate) 100mm thick as in sub base complete all as specified and directed.

Dismantling of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar complete all as specified and directed.

M&L for chequered cement concrete tile 30cmX30cmX 20 to 25mm thick set jointed and pointed in neat cement siurry in floor with grey cement and pig ments over 20mm thick screed bed or bedding layer of CM (1:6) complete all as specified and as directed.

S&F for exterior grade, fibre reinforced heavy duty cement concrete designer tiles 30mm x 30mm x 20 to 25mm thick layer colour pigment as per IS 1237-1980 and including 20mm thick screed bed or bedding layer in CM (1:4) complete all as specified and as directed.

M&L machine pressed 80 mm thick M40 Grade pre-cast cement concrete interlocking paver block any shape and size with grey cement and pigment(colour) glossy finish , laid dry over 50mm thick stone dust or sand base and compacted with using vibrator, complete all as specified and directed.

M&LMachine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment laid dry over 50mm thick stone dust or sand base and compacted with using vibrator, complete all as specified and directed.

M&L for 75mm thick PCC (1:2:4) type B-2, using 40mm graded stone aggregate as in hardstanding, surface finished even & fair without using extra cement complete all as specified and as directed.

M & L for finishing concrete road, pavement with brooming all as specified and as directed

Forming contraction (Dummy) joints 50mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as specified and as directed.

M&L PCC 1:2:4 type B1 using (20 mm graded aggregate) as in kerbing all around of chequered /interlocking tiles complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

S & F for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, ornamental and intricate design and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

S & F in mild steel work conforming to Fe 290.Gde-E-165 in posts, roof trusses,fencing,wind tie & struts angle including cutting top to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete all as specified & directed.

S & F for framed work of rolled mild steel conforming to Gde Fe 410-W (Gde -E-250) quality -A, as in doors or gates of angle or other section with gusset plates, rails, braces, etc, drilled for fixing of steel sheeting or other covering; doors,ladders etc to be prepared for hanging or sliding with and including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting, running rails & guides) and hanging, fastening & fixing complete all as specified and as directed.

M&L Preparation of new previously untreated steel and iron surfaces of any description not other wise described over 10 centimetre width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Dismanteling to plain or corrugated MS sheet any gauge, thickness including nainital or similar pattern as in roof covering complete all as specified and directed.

S&F 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws etc complete all as specified and directed.

S&F 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in valley gutter, ridge hips etc. fixed with self tapping screws etc complete all as specified and directed.

Dismantling fencing wire mesh, any type all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section including taking out embedded portion in concrete complete all as specified and directed.

S & F mild steel security chain link fencing 60mm x 60mm with PVC coated mesh made out of 3mm dia MS wire and 1.00mm thick PVC coating throughout fixed to RCC/steel post including binding wire complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20mm agg for fixing angle iron post etc all as specified and directed.

Demolition of reinforced cement concrete (Reinforcement cut as required to facilitate deomolitions) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

S&F for TMT mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, fencing,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Pre-cast cement concrete cover slab for manhole and drain cover in plain cement concrete 1:2:4 type B-1, (using 20 mm graded stone aggregate) set in cement mortar 1:4 with plain faces complete all as specified and as directed. (Note:- Reinforcement shall be measured and paid seperately)

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 sqm not exceeding 4.0 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed.

Taking down of shutters of any description n.exc.1 sqm each including iron mongrey & removing from site complete all as specified and directed by Engr-in-charge.

Taking down shutter from frame exc 1 sqm but n.exc 2 sqm each including iron mongrey & removing from site complete all as specified and directed by Engr-in-charge.

S & F 2nd class hard wood plain solid straight chowkats and frame of wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S & F Flush shutters 30 mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides and both faces is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S & F 35mm thick second class hard wood plain, framed,panelled shutters(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and as directed.

S & F Factory made glazed and Skelton shutters 35mm thick of 2nd class hardwood,open rebated and prepared to receive glass, guaze etc (Without Sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc;sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); suppplied and fitted to chowkats.

S&F 30 mm thick second class hard wood Glazed and skeleton shutters for window and ventilators etc, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (b)

S&F mild steel work, Grade Fe-410-0 or Fe- 310-0, as in flat iron (for holdfast) complete all as specified and as directed.

Mild steel tubing of 25 mm dia with PVC coating for curtain rod fancy type including fancy type PVC rings and brackets (wall to wall or flush to wall) for securing to curtain rod, fixed in repair complete all as specified and as directed.

Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and edgeswill be painted to match will printed sheet fixed in opening as per specification & drawings complete all as specified and as directed.(Make : Rajshree,Plastiwood, Sintex or equivalent as approved)

All as per item 57 but wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tube top & bottom rail mild steel frame shall be covered with heat moulded plain colour PVC “c” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying & fixing in the frame at site as per specification and drawing complete all as specified and directed.

All as per item 59 but wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading.

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (style:)with particle board core, with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.(Make : Rajshree Plastiwood, Sintex or equilent as approved)

S&F for aluminium door/window/ventilator/partition, made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame & necessary jointing cleats, glazing clips, powder coated aluminium snap beading,screws with UV proof rubber gusket all around the shutters etc, complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts, hooks & eyes, peg stays and handles including connected items,with and including making good to the disturbed portion with its original specifications complete all as specified and directed.

Taking down aluminium doors shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixng the handles & mortice lock in existing postiion with and including new screws including refixing the door shutters in same opening complete all as specified and directed. Note : If broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same will be paid separately under relevant items.

Taking down aluminium windows shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium cleats of existing make and also refixng the locks & roller in existing postiion with and including new screws including refixing the window shutters in same opening complete all as specified and directed. Note : If broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same will be paid separately under relevant items.

S&F for concealed star lock powder coated for aluminium window fixed as per manufacturers instructions complete all as specified & as directed.

S&F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & as directed.

S&F in repair aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified & as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal/wooden frame complete.(Note:- Item rate shall be include any height of Bldg for scafolding as all arrangement.)

S&F 4 mm thick sheet glass, ordinary quality , glazing with oil putty or with wooden beads, area n. exceeding 0.50 Square Metre each pane complete all as specified and as directed.(Note:- Item rate shall be include any height of Bldg for scafolding as all arrangement.)

S&F 4 mm thick sheet glass, ordinary quality , glazing with oil putty or with wooden beads, area exceeding 0.50 Square Metre each pane complete all as specified and as directed.(Note:- Item rate shall be include any height of Bldg for scafolding as all arrangement.)

S&F 4 mm thick sheet glass , figured glass, pinhead type , glazing with oil putty area not exceeding 0.50 Square Metre each pane complete all as specified and as directed.(Note:- Item rate shall be include any height of Bldg for scafolding as all arrangement.)

S&F for rubber beading suitable for fixing 4mm / 5mm thick glass in aluminium window / doors etc complete all as specified and as directed.

S&F for aluminium anodised grill of design DG 104 pattern made out of 10mm dia rod fixed with and including standard aluminium frame of F section of size 23.40mmx15.30mm & 1.4mm thick all as per manufactures instructions complete all as specified & directed. Make- Deco grill or equivalant

S & F in repair for aluminium body hydraulically door closer regaulted, designation No.3 universal type, suitable for door shuttes of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed.

M & L for Double action floor spring hydraulically regulated made up of minimum 1.25mm thick alum,inium alloy sheet foundation box, main ody with stainless steel cover, governing pivot made of brass, other plart made of mild steel heavy duty and fixed.

S & F floor door stopper of Aluminium alloy body and tongue, over all length of cover plate 150mm anodised with hard drawn steel spring, fixed to shutters complete all as specified and as directed.

S&F in repair 75mm size 6 lever brass body concealed lock with duplicate keys, fixed in aluminium doors as per manufacturers instruction all as specified and directed.

S & F Pre-laminated 18/19 mm thick partilcle baords, exterior grade, prelaminated both sides with decorative choice lamiantions complete all as specified and as directed.

S&F butt hinges size 100 mm stainless steel complete all as specified and as directed.

S&F butt hinges size 75 mm stainless steel complete all as specified and as directed.

S&F Aluminium handle, cast type anodized size of handle 150 mm complete all as specified and as directed.

S&F 125mm long Extruded aluminimum alloy handles, fabricated type complete all as specified and as directed.

S&F Aluminium anodized, barrel tower bolt of extruded section, length of bolt 100 mm complete all as specified and as directed.

S&F Aluminium anodized, barrel tower bolt of extruded section, length of bolt 150 mm complete all as specified and as directed.

S&F Aluminium anodized, barrel tower bolt of extruded section, length of bolt 200 mm complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 250 mm complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 300 mm complete all as specified and as directed.

S&F in repair water closet seat cover, closed pattern with flat cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

S & F in repairs Vitreous China Half stall urinal White complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed

M&L in repair for viterous china urinal partition white of size 310 x 700mm urinal partions slabs, terminating about 40cm above floor, fixed in repairs complete all as specified and directed.

S&F in repairs PVC connection 15 mm size with P.T.M.T nuts of length 450mm complete all as specified and as directed.

S&F 32mm dia PVC waste pipe for WHB and urinals complete all as specified and directed.

S & F in repairs Bib tap15mm dia standard of CP any colour screwd for iron pipes and fixed (minimum weight 15mm - 90 gms ) complete all as specified and as directed.

S & F in repairs stop valve of CP any colour high presure screwd for iron pipes and fixed (minimum weight 15mm - 90 gms ) complete all as specified and as directed.

Supply and fixing in repair PVC flushing cistern of 10 ltrs capacity including flush pipe PVC connection etc complete all as specified and directed.

S&F in repair 15 mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with long screws shanks and fly nuts complete all as specified and directed.

S&F in repair white vitreous china wash down water closet pan (Pedestal pattern) with and including P or S trap, plastic seat cover closed pattern, fixing bolt etc complete all as specified and directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, of size 580 mm x 440 mm white with integral foot rest complete including provn of cement concrete bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe,CI trap 100 mm Bore of pipe etc complete all as specified and as directed.

S & F in repair vitreous China wash hand basin white, flat back of size 450mmx300mm fixed on and including cast iron cantilever bracket 40x40x5mm , 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete all as specified and as directed.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets,aluminium grid complete all as specified and as directed.

S&F for false ceiling with Armstrong XL 24 mm grid system of grid size 600x600mm with 12 mm thick ceiling board of RH-70 of Armstrong. Grid shall be suspended from ceiling using 4 mm dia pre straighten GI wire with 6 mm nylone rawl plug & screws at 1200 mm intervals complete all as manufacturers instructions and as directed.

S&F in repairs 12mm thick ceiling board of size 600mm x 600mm of RH-70 of Armstrong false ceiling complete all as specified and directed.

M&L in repairs 4mm thick non asbestos fibre cement building designed boards in ceiling fixed or laid /inserted to timber/GI/Aluminium frame work with screws.

M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coat of oil distemper complete all as specified and as directed.

M&L for preparation of new or previously untreated plastered surfaces of walls and applying two coats of acrylic antifungal paint exterior grade paint CAHOUFLAGE PATTERN on one coat of primer complete all as specified and as directed.

Complete removal of existing water proofing treatment of any description in any position including cleaning, wire brushing, watering, removal of debris upto 1500mtr distance as directed by Engineer-in-charge complete all as specified and as directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in roof / chajja padding for maintaining roof/chajja slope maintain complete all as specified and as directed.

M&L for rendering 20 mm thick cement plaster in CM (1:3) on roof top / sonken slab surface finished even and fair including WPC by weight of 3% of total cement content complete all as specified and as directed. Note : WPC will be measured separately

M&L for applying oil bound primer @ 0.40 Litre/Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg/Litre at 25 degree cesius on the prepared dry roof surface and provide and lay 4mm thick APP modifed water proofing membrane reinforced with non-wooven polyster matt with physical properties as given in particular specification. The laying shall got be done through authorized applicator of manufacturer as specified in particular specifications. Provide over the membrane finishing with two coats of solar reflective bituminous aluminium paint @ 0.10 Kg/sqm as prescribed by manufacturer of membrane including Ten years guarantee on prescribed form complete all as per particular specification , manufacturers instructions and as directed by Engineer-in-Charge.

Supply only integral water proofing compound.(ISI mark) complete all as specified and as directed

Complete removal of existing PVC tiles /sheets, of any description in any position including cleaning, wire brushing, watering, removal of debris upto 1500mtr distance complete all as specified and as directed

S&F for PVC tiles /sheets, of 2mm thick laminated plain coloured homogenous, laid with approved rubber based adhesive in floors all as specified and directed.

Cutting holes into or through bricks wall built in cement mortar or cement mortar exc 150 sq cm but n. exc 400 sq. cm and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and as directed.

Roughning of old concrete floor of concrete surfaces by picking, sweeping, cleaning and washing down with water to remove dust etc complete all as specifed and directed.

M&L for rendering 10 mm thick cement plaster in CM (1:4) on sonken slab surface finished even and fair including WPC by weight of 3% of total cement content complete all as specified and as directed. Note : WPC will be measured separately

M&L for applying evenly a tack coat of industrial bitumen 85/25 grade at the rate of 1.2Kg/Sqm on vertical surfaces and floors of sunken portion of slabs of bath and WC after laying all CI connection brach pieces etc after covering joints with PCC (1:2:4), mixed with integral water proofing compound and inlcuding cleaning surfaces all as specified and directed.

M&L for PCC of type D2, 1:3:6 using (40mm graded stone aggregate) 75mm thick as in sub floors complete all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B1, using (20mm graded stone aggregate) as in floors in sub floors complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding complete all as specified and as directed.

M&L for Non skid ceramic (Durastone heavy duty) tiles size 300mm X 300mm X 8 to10 mm thick(square or rectangular ) polished setting and jointed with cement slurry laid as in floors, roof over & including 15mm thick bedding of layer of cement sand mortar (1:6) and pointed with coloured cement to match with surfaces of tiles complete all as specified and as directed.

M & L for Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 20 mm thick screed bed in cm (1:6) for laying floor fineshes complete all as specified and directed.

M&L non skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in floors over screed bed or bedding layer of morar 15 mm in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.

M&L for Glazed ceramic colour tiles 300x200x5 to 7 mm thick as in skirting,dados, risers to steps,etc,set and jointed in neat cement slurry and pointed in colour cement to match tiles, over and including 10 mm thick rendering or bedding layer in cement mortar 1:4 complete all as specified and directed.

M & L for Glazed ceramic tiles in vertical surface 350mmx250mm x7mm / 450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in cm (1:4) for laying floor fineshes complete all as specified and as directed.

M&L for green marble 17/18 mm thick machine cut in skirting / dado,window sill, laid over cement screed, jointing and pointing with white cement slurry complete all as specified and directed.

Taking up or down steel tubing and connections 15 mm bore complete all as specified and as directed.

Taking up or down steel tubing and connections 20 mm bore complete all as specified and as directed.

M&L for 15 mm dia steel tube medium grade galvanized with all fittings and fixed complete in wall, ceiling or laid in floor complete all as specified and as directed.

M&L for 20 mm dia steel tube medium grade, galvanised with all fitting and fixed complete to wall complete all as specified and as directed.

Unique Associates

REALTECH PROJECTS

M/s S.D Construction Co

M/s C S Construction Company