Renovation of washroom of Parking area of North Campus, Charlie One and Reception Room ,Main Gate, at IRB Sarangpur, Chandigarh.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. .2.8

All kinds of soil. .2.8.1

Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : .2.1

All kinds of soil. .2.10.1

Pipes, cables etc. not exceeding 80 mm dia. .2.10.1.1

Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia .2.10.1.2

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level .4.1

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) .4.1.3

1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.11

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: .6.1

Cement mortar 1:4 (1 cement : 4 coarse sand) .6.1.1

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Size 300mm x 600mm) .8.31

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : .9.95

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : .9.96

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : .9.97

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete .9.1

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: .10.14

Profile B .10.14.1

Fixing with adjustable lugs with split end tail to each jamb .10.14.1.1

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. .11.56

Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. .11.56.1

12 mm cement plaster finished with a floating coat of neat cement of mix .13.7

1:3 (1 cement: 3 fine sand) .13.7.1

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : .13.62

Two or more coats on new work over an under coat of .13.62.1

suitable shade with ordinary paint of approved brand and manufacture .

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. .15.6

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : .17.3

W.C. pan with ISI marked white solid plastic seat and lid .17.3.1

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: .17.7

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps .17.7.1

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. .17.8

Providing and fixing white vitreous china water closet squatting pan (Indian type) .17.13

Orissa pattern W.C. pan of size 580x440 mm .17.13.2

Providing and fixing of C.P. brass Jet with brass nossel steel flange & PVC flexible pipe complete in all respect. .17.16A

Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. .17.19

10 litre (full flush) capacity-white .17.19.1

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. .17.28

32 mm dia .17.28.1.1

Providing and fixing soil, waste and vent pipes : .17.35

100 mm dia .17.35.1

Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 .17.35.1.2

75mm diameter : .17.35.2

Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 .17.35.2.2

Providing and fixing heel rest sanitary bend .17.4

100 mm dia .17.40.1

Sand cast iron S&S as per IS - 3989 .17.40.1.2

Providing and fixing collar : .17.57

Sand cast iron S&S as per IS - 3989 .17.57.1.2

Sand cast iron S&S as per IS - 3989 .17.57.2.2

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : .17.58

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, incl. cost of cutting and making good the walls and floors. .17.6

100 mm inlet and 75 mm outlet .17.60.2

Sand Cast Iron S&S as per IS- 3989 .17.60.2.1

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc .18.1

25 mm dia nominal bore .18.10.3

32 mm dia. nominal bore .18.10.4

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anticorrosive bitumastic paint, cutting chases and making good the wall: .18.11

15 mm dia. nominal bore .18.11.1

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : .18.17

25 mm nominal bore .18.17.1

32 mm nominal bore. .18.17.2

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : .18.18

25 mm dia nominal bore .18.18.3

Providing and fixing uplasticised PVC connection pipe with brass unions : .18.21

45 cm length .18.21.2

15 mm nominal bore .18.21.2.1

Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : .18.38

25 mm diameter pipe .18.38.3

32 mm diameter pipe. .18.38.4

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : .18.46

25 mm nominal bore .18.46.3

32 mm nominal .18.46.4

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. .18.48

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : .18.49

15 mm nominal bore. .18.49.1

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. .18.5

15 mm nominal bore. .18.50.1

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 .18.53

15 mm nominal bore. .18.53.1

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge .18.53A

Cutting holes up to 30x30 cm in walls including making good the same: .18.76

With common burnt clay F.P.S. (non modular) bricks .18.76.1

Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. .18.78

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: .19.4

100x100 mm size P type .19.4.1

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 .19.4.1.1

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. .E&M DSR 2025 1.10

Group C .1.10.3

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. .1.32

Providing and fixing of C.P. soap dish complete in all respects of approved make .NSR

Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) 100 mm dia, of approved make .NSR

Providing & fixing looking glass of size 22"x16" with bevelled edge all side of approved make .NSR

Providing and fixing HCI P-Trap. Complete in all respect .NSR

Providing and fixing ISI marked water proof 30mm thick flush door shutters of pine frame seasoned and treated with seasoned pipe filler and 2.5 mm gurjan core, fungus resistant, ecofriendly with 1mm thick laminated on both side with phenol formaldehyde resin conforming to IS:848; complete in all respect. .NSR

Dismentaling glazed wall tiles including plaster and disposal of malba away from site at sutable making site for dumping of malba complete in all respect. .NSR

Providing and fixing of C.P/SS long 32mm bend .NSR

Construction of Curb consisting of cement concrete 1:2:4 excluding cost of C.P. hinged grating but including cost of sand bajri etc. .NSR

Providing and fixing HCI Cover with frame for GT & IC of approved make .NSR

Providing and fixing of M.S sheet of 5mm thick for making platform for pvc tank with 2 coat of paints after 1 coat of primer complete in all respects .NSR

Providing and fixing of chinaware ONE Piece Floor Mounted EWC complete with Cistern, Soft Close Seat Cover and Twin Flush Fittings of make CERA Model CAMPBELL /CRUSE / CLAIR or equivalent make in the same range of AOR .NSR

Dismantling of Old material, not reuseable, including GI / HCI Pipe & Specials, Faucets, Ceramic Fixtures, PVC tanks & allied items and disposal of malba including that of chase from site to a approved dumping site complete. .NSR

S/E off 1x18/20watt. LED box type fittings made of CRCA sheet with LED tube rods the fittings should be installed on existing surface . The LED tube rod should be of Philips/ Wipro/Bajaj/ Havells/Crompton /Twinkle make of polycarbonate material only. The batten for housing the tube rod shold be of wipro/Bajaj/Havells/ Crompton/ Twinkle make only. The job includes carriage, erection, making connection testing and commissioning of the fitting. .NSR

Please Enable Macros to View BoQ information