GE (N) P/T - 13 OF 24-25 SPE REP TO BLDG NO 19A, 26 A OFFR MD ACCN AT VICTORIA RD PROVN OF OPEN WEATHER SHED EXTERIOR TILES AND CERTAIN ALLIED WKS IN 97A GURUDWARA RD OFFRS MD ACCN COLONY IN THE AREA OF AGE B/R (E) AND AGE E/M (N) UNDER GE (N) PUNE

Amount

Demolition of cement Concrete( unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate ) as in sub base.

M&L for 40 mm thick Cement concrete 1:2:4 type B-0 (using 12.5 mm graded aggregate) as in sub base complete all as specified and as directed.

M&L for Virified GBT light /dark shade tiles 10 to 12 mm thick (square/ rectangular) polished, area of each tiles 800 mm X 1600 mm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match bedded over 15mm thick screed bed or bedding layer for floor finishes in cm (1:6) and including demolition of existing tiles complete all as specified and as directed.

M&L for coloured glazed ceramic Joint free tiles of size 600mm x 300mm x 8mm thick of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over & including 10mm thick rendering in cement mortar 1:4 and including demolition of existing tiles as in vertical surface etc complete all as specified & directed.

M&L glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:3 and demolition of existing tiles complete, all as specified.

M&L non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 and demolition of existing tiles complete all as specified.

M&L non-skid coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding exc. 0.06 sqm but not exc. 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:6 and demolition of existing tiles complete all as specified.

Excavation in post holes in soft/loose soil n. exc 0.5 cum,getting out,returning,filling in and ramming earth or broken rubble mixed with earth around,in layers n.exc 25cm,complete all as specified and as directed.

M&L for cement concrete in foundation,fillingand mass concrete type B-2 1:2:4 using 40mm graded aggregate as in foundation.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F rolled mild steel sections Fe-410-W(Gde-E-250)quality-B, as in main and cross beams, hip and jack rafters; purlins where connected to common rafters fixed with angle cleats or other connecting plates complete all as specified and directed

M/L for framed work such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framed work of water tanks and similar work

M&L for preparation of newly steel or iron surfaces and applying one coats of synthetic enamel paints over a coat of red oxide primer.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws all as specified and directed..

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed

Material and labour for brickwork with fly ash bricks, old size straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed

M&L Textured heavy duty exterior tiles of size 300mm x300mm x 10mm thick , set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed in CM (1:4) including demolition of existing tiles complete all as specified. make ;- Jonhson Endura textured design or equivalent of kajaria /Somany).

M&L complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other means including filling depessions of scapped surface with putty and pereparation of surface for further treatment and M&L for two coats of distemper oil emusion white or tinted over a coat of primer over one coat of wall care putty 1 to 2mm thick on walls complete all as specified and dircted by Engr-in -Charge

M&L complete removal of existing treatment on ceiling (any number of layers ) by scarping with steel scapers or any other means including filling depessions of scapped surface with putty and pereparation of surface for further treatment and M&L for two coats of distemper oil emusion white or tinted over a coat of primer over one coat of wall care putty 1 to 2mm thick on walls complete all as specified and dircted by Engr-in -Charge

M&L for preparation of old wood or wood based surface and applying one coat of synthetic enamel paint all as specified and directed.

M&L for 15 mm thick cement plaster in CM 1:4 on brick or concrete surfaces finishing the surfaces even and smooth without using extra cement with two coats of exteriror emulsion weather proof paint over a coat of primer on new surface all as specified .

Taking down plaster on brick or stone walls etc including raking out joints , hacking for key scrubbing down with water , etc complete all as specified and directed

M&L for rendering 15mm thick in CM (1:4) on fair faces of brick or concrete surface finished even and smooth without using extra cement.

M&L fpr preparation of newly plastered surfaces of wall and applying two coat of 100 % weather proof acrylic exterior emulsion paint over one coat of primer complete all as specified and as directed.

M&L for rendering 10 mm thick cement plaster on faces of brick or concrete surfaces in cement mortar(1:6) finished even and fair without using extra cement , including taking down existing plaster with two coats of OBD of any tint over a coat of primer all as specified and directed.

Demolition of stone slabs and tiles laid dry or laid dry and pointed of any description or thickness in floors, aprons etc.

M&L Granite (of any type), 18- 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform,WHB plateform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges and dismantling existing floor complete,complete. all as specified.

Labour only for full round moulding to 18 to 20mm thick granite slab complete all as directed.

M&L for machine cut 20mm to 25mm thick polished cudappah stone slab as in shelves, partitions, cooking platform below granite stone and like including necessary jointing and pointing and making good to disturbed surface complete all as specified and directed

Taking out old rusted/unsv, structural steel work such as steel windows/ventilators and removing same from work site complete including necessary cuttings in brick walls all as directed.

S&F Aluminium powder coated louvered ventilator using rectangular tube of size 63.5X52X1.5mm thick, blades set, with provision of exhaust fan using aluminium section heavy duty including glass 4mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc.

S&F aluminium Powder coated three track sliding window with two shutters, one 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified. Catalogue numbers of Jindal company or equivalent make as specified. Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604, all as specified and directed.

S&F in repair 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all incl taking down existing G I tubing as specified. Make: JINDAL, TATA, RAVINDRA

All as per Srl item No 34 here-in-before, but fixing only

S&F in repair 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all incl taking down existing G I tubing as specified. Make: JINDAL, TATA, RAVINDRA

All as per Srl item No 36 here-in-before, but fixing only

M&L cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth all as specified.

S&F in repair vitreous china wash hand basin white of bowl size 550 x 440mm including waste coupling and PVC waste pipe, 32mm dia, pillar tap cast copper alloy with capstan heads chromium plated fancy 15 mm bore to be fixed with and including M S brackets complete all as specified. Make : Cera/Prayag/Johnson Pedder.

S&F in repair white counter top Basin (self-rimming) Oval shape of size 550mm x 430mm x 195 mm fixed in position including waste coupling and PVC waste pipe, 32mm dia. complete Make: Perryware Model Aquarius, Cat Part No – C0466(SP) or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs 15mm dia brass chromium plated fancy type, pillar tap with fly nuts capstan head screwed down high pressure with or Without lettered hot or cold with long scewed shank complete all as specified. [Make : JAGUAR or equivalent in Plumber/Ess Ess]

S&F in reapir Cabinet mirror plastic body for toilet of size 400x500mm with 4mm thick looking mirror complete all as specified. equivalent of make as per Appx 'A' as approved by GE.

S&F PVC connection 15mm bore size with two nuts and washers of length 450mm all as specified. Make : Prayag/Polytuff. CAT No.323Z

S&F in replacement angle stop valve with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified. Make: Jaquar Cat Part No FUS- 29053 FUSION SERIES or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs, chromium plated bib cock with wall flange quarter turn complete all as specified and as directed. Cat No. FUS-29037 of make Jaquar ‘Fusion' series or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs bib cock long nose quarter turn suitable for 15mm bore pipe with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified. Make: Johnson VIVA series Cat part No: T4806 or of equivalent make as per Appx 'A' as approved by GE

S&F in repair Brass Chromium plated towel rack all as specified and directed. Make: Prayag Cat No BA-03 or of equivalent make as per Appx 'A' as approved by GE

S&F in repairs Two Way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified. Make Jaquar Cat Part No FUS-29041 FUSION SERIES or of equivalent make as per Appx 'A' as approved by GE.

S & F in repair Brass Chromium plated towel rail all as specified and directed. Make: Jaquar Cat No AEC-1111B or of equivalent make as per Appx 'A' as approved by GE

S & F in repair brass Chromium plated soap dish(Polycarbide) , fixed to wall with CP brass screws, all as specified and directed. Make: Jaquar Cat No AEC-1133 or of equivalent make as per Appx 'A' as approved by GE

S&F PVC (SWR) floor Trap, plain with grading of dia outlet 100mm dia incl fixing .

S&F in repairs 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors.

S&F in repairs 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls.

S&F in repairs 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors.

S&F in repairs 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls.

S/F PVC (SWR)vent cowl of size 110mm bore

S &F in repair pull it easy dry clothes pulley system of 6 feet long complete all as specified and as directed.Make Eassy dry system private ltd or of equivalent make as approved by GE

S&F in repair stainless steel plate rack of size 609mm X 914 X 254 mm mm all as specified Make Blue star

S&F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 914mm x 460mm x 203 mm, bowl size 405mm x 354mm x 203mm all as specified. Make Blue star

S&F in repair Sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes cappling, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size405mm x 460mmx 203mm, bowl size 405mm x 354mm x 203mm all as specified.Make: .Blue star

S/F in repair for glass shelf 450mm x 150 mm x 8mm thick with chromium plated railing fixed with and including chromium plated brackets complete aii as specified and as directed.

S&F in repair stainless steel utensil rack for modular kitchen incl latches, magnetic hinges, handle and all necessary fittings required for modular kitchen, all as specified and directed by Engineer-in-charge, consisting following components:- (a) Cup plate rack made of 3 mm dia stainless steel wire (b) Meal plate rack made of 3 mm dia stainless steel wire (c) Catlery Basket made of dia stainless steel wire (d) Bottle basket plate rack made of 3 mm dia stainless steel wire (e) Stainless steel hinges 19 mm long L type. (f) Stainless steel hinges 12 mm long L type. (g) Stainless steel hinges 6 mm long L type. Note :- (1) Weight of each unit shall be assessed at site. (2) PVC part / Shutter shall be measured and paid separetly under item no.103/104 below

S&F Drawer sliding channel fixed with screw and fitting fixture of 450mm long all as specified and as directed

M&L18 mm thick UV board duly edge banded with 0.8 mm thick PVC taping fitting of shutters shall be fixed with and including continous piano steel hinges and modular handles, design and colour as approved by GE suitable for cup board etc including taking down with existing one complete all as specified and directed.

S&F Shelves made of HDHMR board 18 mm thick water proof with life time warranty for anti-termite shall be duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves complete all as specified and directed.

S & F in repairs Magnetic and connected plate to shutters and frame complete all as specified and directed.

S & F 30mm thick continuous (piano) hinges, mild steel, bright finish or electrogalvanised

Supply and fix in repair for corner glass shelf of size 300mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed.

Supply and fix in repairs for hand shower chromium plated (health faucet) 15 mm bore, (ABS body) with 8mm dia. 1 metre long flexible tube & wall hook, Cat No. ALD-CHR-593N of make Jaquar or of equivalent make as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repair Toilet paper holder of stainless steel, all as specified and directed. Make: Johnson Fusion series Cat part No: T3254C or equivalent as approved by the GE.

S&F 20 mm dia stop valves cast copper alloy, screwed down, high pressure with crutch or butter fly handles, screwed both endsfor iron pipe complete all as specified and as dircted.

S&F in repairs Vitreous China wash down water closet pan (pedestel pattern) white,including trap connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan including 450/600mm long PVC connection with PTMT nuts and plastic water closet seat of white in colour, back closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified.

S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including long Arm P-trap (CI) 100 mm dia of lenght up to 700 mm or as per site requirement ,complete including making good to floor all as specified. Make : Cera/Prayag/Johnson Pedder.

S&F in repirs wall mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: Jaquar Cat Part No FUS- 29273UPR FUSION SERIES or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair cast copper alloy CP overhead shower arm 305mm(12") long square shape with wall flange(for wall mounted showers) complete all as specified and directed by Engr-in-charge. Make : Cera Cat Part No F7040202 or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs Overhead shower round shape 100mm single flow (ABS Body Chrome plated with gray face plate) with Rubit cleaning system Make- Jaguar Cat No : OHS:- 1989

Taking down chowkats or frames not exc.1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed

-Ditto- all as per Item No.78 above but exc. 1.5 sq. m but n exc 4 sqm each complete all as specified and directed

Taking down shutters of any description exc 1 sq. m and n exc 2 sqm each complete all as specified and directed

All as per ser items No.80 above but exc. 2 sqm each.

S&F in repair aluminium die cast body Door closer hydraulically regulated designation No 2, universal type suitable for door shutter of 701 to 850 mm in width and of weight between 36 to 60kg ISI Marked complete.

Factory made 100 % solid wood plastic composite(WPC) door frame, double rivet 125 mm x 45 mm made from wood plastic composite ( Single extruded process) material with density 780 Kg/ Cum, all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

Factory made 100 % solid wood plastic composite(WPC) door frame, single rivet 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

Supply and fix for 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 30X6mm all around the shutters complete all as specified and as directed all as specified,including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and directed.

S&F for Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F in repair floor door stopper of brass type polished and tongue 135 mm anodised with hard drawn steel spring fixed in floor complete all as directed and specified.

S &F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.4mm & fixed with alluminium wire staples all as specified & directed.

Factory made PVC Flush door of 33 to 35 mm thick overall thickness comprising of 19 SWG MS tube of size 19 x 19 mm (19 gauge) covered with 5mm thick PVC Sheet, (any colour as approved) on both sides core shall be filled with 19mm to 20mm thick PVC solid board taking down with existing one complete all as specified.Note : All screws shall be self tapping chroming plated all as specified and directed by Engineer-in-Charge.

M&L for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed .

S&F in repairs Stainless steel butt hinges medium weight 100mm all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm

S&F in repairs Drapery curtain rod of metalic 25mm dia covered with PVC coating complete with MS bracket any colour rings and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified.

S & F in repair PVC low level flushing system plastic valve with inlet ball valve and ball (of capacity 10 liters) incl 32mm PVC flush pipe complete all as specified and directed

Supply & Fix rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyethylene material which is duly stabilized with anti-oxident Plastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball (Minimum weight 210gms) and 20 mm bore brass stop cock, high pressure with crutch or butterfly handle etc complete including dismantling existing water tank all as specified and directed.

Complete removal of existing roof treatment and course from roof surface including adjoining parapets and removing the material to a distance exceeding 50 Mtr but n.exc. 100 Mtr including roughening old concrete surfaces by tucking & rubbing with wire brushes and cleaning the surfaces with water to remove all loose dust etc. complete all as specified and derected.

M&L 15mm thick rendering in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for laying of APP based polymeric membrance finished even and smooth with out using extra cement compelte all as specified and as directed (Note :Polymeric membrance And WPC shall be measured and paid separately here- in-after).all as specified and as directed.

M & L water proofing treatment to RCC roof slab including parapet comprising of the following course of treatement / specified from bottom to top (a) Applying Bituminous primer @ 0.40 Ltr per Sqm over plastered surfaces of roof including parpet surfaces. Bituminious primer shall be 'Tar Mastic' manufactured by M/S STP LTD or 'EMW FLATE' manufactured by M/S Texsa India Ltd. (b) Over the priming coat laying one layer APP based polymeric membrance of approved manufacturer, 3mm thick of weight not less than 3.60 Kgs/Sqm reinforced with non woven polyester fabric weight not less than 150 gms per Sqm. Polymeric members shall be taken to a height of 60cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrance flashing. (c) Application of two coat of bituminous aluminium paint over the polymeric membrane after necessary preparation and cleaning. Note :- (i) Laying APP based polymeric membrance shall be done by torch on method or as per manufacturers instructions. (ii) A minimum overlap of 100mm shall be made at the end and 75mm shall be made at the sides of the polymeric membrance respectively and sealed all ovelaps and joints as per Manufacturers instructions. (iii) APP based polymeric membrance shall be "SUPER THERMOLAY" manufactured by M/S STP LTD or MOPOLY FP manufactured by M/S Texsa India Ltd.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc, and hoisting if required reconnecting and re-fxing in position.

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out soft/loose soil.

M&L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in foundation filling and mass concrete.

M&L 75mm thick cement concrete 1:4:8 type D-2 (40mm stone agg) as in Subbase

M&L for rendering 15mm thick on fair faces of brick/concrete surfaces in CM (1:4) finished with sponge finish & applying two coats of cement base paint over one coat of primer.

Material and labour for designer coloured glossy rubber moulded chequered cement concrete tiles of size 30cmx30cmx25 to 27mm thick in floor, set, jointed and pointed in neat cement slurry with grey cement and pigment over and including 20mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for cement concrete type C1 (1:3:6) using 20mm graded aggregates as in post holes complete all as specified and directed.

Supply and fix for rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming Fe 410-W(Gde-E-250) quality -B complete all as specified and as directed.

S&F 5 mm thick tinted glass including rubber beading for securing sheet glass in aluminium frame work complete all as specified and as directed.

M&L for powder coated aluminium anodized sections for partition wall/frame with one or more rebates glazed fixed or sliding consisting of various aluminium sections of appropriate weights as specified and directed, including glazing clips, suitable Nylon gasket, etc complete all as specified and as directed.

S&F fully glazed single/double leaf openable door, using aluminium powder coated sections on door floor spring, pivots, with 5 mm thick glass in panels fixed with aluminium glazing clips section No. 19381 and 19352 and PVC rubber beading all around including with 1” interlock and handle, two lever door lock, sliding wheel etc sections as given below and all as specified and directed by Engineer-in-Charge.Top-19528, Middle – 19575, Bottom – 19530, Vertical – 19526, 1” Interlock (20939), 1” Handle (20602)

Supply and fixing in repairs Door closer hydraulically regulated designation No-2 universal type ISI marked suitable for door shutter of weight between 36 to 60 kg, cast iron body complete and all as specified. Make : Heera/Ashokas/Universal

M/L 2 coats of synthetic enamel paint over a coat primer on newly steel surface including preparation complete all as specified and directed.

Material and labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit including all accessories, Metal flush box of suitable module, with earth dolly, covered with twin colour (specified by Engr-in- Charge)modular white cover plate & frame after chasing in stone masonry walls etc for accomodating modular switches, sockets, regulators etc including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the following

One light / wall / exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed

One ceiling fan point controlled by one, one way switch 6 Amps and regulator Note : PVC Casing caping / Pipe of size as required at site on surface of ceiling (only for fan point) in lieu of concealed is permitted and is deemed to be included in the unit rate quoated.

One bell point controlled by one, one way switch 6 Amps complete all as specified and as directed

One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed

One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed

Description all as per 117 here-in before but using 2.5 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 pin socket outlet plug point,16 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed

Description all as per 117 here-in before but using 4.0 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 pin socket outlet plug point,16 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed

Supply and fixing Modular Switch - 6 Amps, Single pole one way, one module complete all as specified and as directed.

Supply and fixing Modular Bell push - 6 Amps, Single pole one way, one module complete all as specified and as directed.

Supply and fixing Modular Switch - 16 Amps, Single pole one way, one module complete all as specified and as directed.

S & F Modular socket outlet multipurpose 6 Amps, 5 pin, 2 module, complete all as specified and as directed.

S & F Modular socket outlet multipurpose 16 Amps, 6 pin-shuttered type, 2 module, complete all as specified and as directed.

Supply and fixing, Ding Dong bell suitable for operation on AC. 230 volts, single pole complete all as specified and as directed.

Supply and fixing modular fan step regulator, 120W - 2 module suitable for ( 48" & 56" fans) supply complete all as specified and as directed.

S & F Ceiling rose, 3 phase / PVC / polycarbonate, complete all as specified and as directed

Supply and fixing 20/22 Watt Inverter LED Battenaluminium body with Opal Diffuser, IP20, Battery back-up & Functioning as per Product TDS with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed. Make Halonix Cat No LED INVERTER BATTEN HLB-08-22-CW-INV or equivalent in Havells, LHEXACP7FNIW020

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to connector, making good disturbed surfaces complete all as specified and as directed. Make Jaquar cat No -LGLZ01X010XW , Orient Cat No- LBLN-10-C-SQ

S & F in Repair for Decorative wall mounted luminaire with opal glass with nickle finishing wall lamp with E27 lamp holder with and including LED bulb 10/11 watts complete all as specified and as directed. Make- Jaquar Cat part No - JNL-CHR-WLSL-55004E27 , HALONIX HLWB-05-E27 or its equivalent in Philips.

S/F LED street light fitting 25 Watt 230V energy efficient & environment friendly type. The fitting should have powder coated, pressure die cast Aluminium housing and heat resistant toughened glass with frame having better optics for uniform distribution complete all as per Make JAQUAR Cat No LSRTO4S025XC or equivalent of make Bajaj, Philips, Havells as approved.

Supply and fixing ceiling fans working on single phase input voltage 140-285 , Sweep- 1200 mm, Power 32 W, 345 RPM , with 232 Air delivery CMM (m3 /min), complete with compact BLDC Motor, blades, down rods, electronic regulator and accessories, including making connections with provision of flexible wire 23 /0.0076 twin core copper conductor from ceiling rose/connector to fan complete all as specified & as directed.

S & F for plastic body exhaust fan, AC single phase, 240 V of size 250 mm sweep with louvers (as per Cat Part No -698502 of Make Indo Asian or equivalent Make- Bajaj Maxima DX/ Usha Crispair )including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed

Taking down carefully existing unserviceable main switch /cutout /DBs of any type, capacity and description and removing materials from site and making good disturbed surfaces of walls, floors as per the existing finishes all as specified and as directed.

S & F sheet metal enclosure MCB DB SPN 8 way with 100 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed

S & F Vertical TPN Distribution Board in sheet metal enclosure double door 4 Way, 415 volts, 50 Hz, suitable for Flush Mounting and surface Mounting & provision for FP MCCB as incomer up to 125 Amps as I/C ( Frame1) and SP/TP MCB's as outgoing (Modules Optium F1+12) , With -100 Amps Copper insulated Busbar assembly for each phase, isolated Neutral bar, 2 Earthbar and Cable ties for cable management, IP 43 - #IK 09 with metal door including necessary cement work and electrical connections complete all as specified and as directed.

Supplied and fixed Four pole MCCB, Thermal Release Range 63-100 Amps, rupturing Breaking Capacity Icu at 415V AC 50Hz. 30 (kA) complete all as specified and as directed

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.

S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 4.0 Sqmm and one single core 4.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed in stone masonary PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed all as specified and as directed complete all as specified and as directed. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length).

Supply and fix for sheet metal enclosures single pole and neutral enclosure with a two pin and earth plug and socket complete with one MCB SP 20/ 32Amps including removal of old unserviceable one complete all as specified and as directed.Make - Scheinder/Legrand/L&T/ ABB

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion

Supply and fix laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35.0 sq mm 3.5 core

Excavation in trench not exceeding 1.5 Mtr in depth and not exceding 1.5 Mtr in width and getting out in hard dense soil.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cms by using excavated soil.

Removing surplus soil to a distance not exceeding 50 m and depositing where directed at level not exc. 1.5 m above starting point.

Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 V, 10- 60Amp, accuracy class-I 50Hz,conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH Make: L & T, Legrand, Secure

Supply and fix cast iron, epoxy coated 80 mm bore water meter class B Make kranti,Jaldhara,Sant

S&F in repairs framed work such as grill,channel, valve chamber cover, grating ,etc,with end of bars shouldered and/or riveted,or forged in to spikes, framed guard bars, flat iron, angle, barred iron doors, ladder, framed balusters,walk ways,railings,framework of water tanks and and similar work GDE Fe-410-0 or Fe-310-0, Note : Work may involve fixing of frames and other iron work on RCC overhead tanks above 30 m or more from the ground level.Rate of the same is deemed included in the quoted rate

M&L for rendering with 15mm thick in cement mortar 1:4 on fair surfaces of brick or concrete surafaces finshed even and smooth surfaces without using extra cement complete all as specified and directed by Engr-In-Charge.

Supply and lay medium grade galvanized pipe 25 mm bore with all fitting such as tee, bends, union elbow reducerin trenches, walls, roof complete all as specified and directed

Supply and fix gun metal gate valve, cast/ductile screwed down, High pressure with iron wheel handle , Screwed both ends for iron pipe or unions of 25 mm bore :- Make: leader,Zoloto,GEM,Sant

Supply and lay in repairs 3- layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV of 80 MM bore laid in trenches etc. with all fitting such as tee, bends, union, elbow reducer, pasting adhesive materials etc with outer dia of pipe 90 mm Make:Finolex,Prince,Kisan,Supreme

Supply and lay in repairs 3- layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV of 25 MM bore laid in trenches etc. with all fitting such as tee, bends, union, elbow reducer, pasting adhesive materials etc with outer dia of pipe 32 mm Make:Finolex,Prince,Kisan,Supreme

Supply and fix in repairs PP-R gate valves (brass insert ) including complete all as specified and as directed for the following outer dia 32 mm Make:Finolex,Prince,Kisan,Supreme

Material and labour for cutting existing road/hard standing for taking out pipe /making new connection and making good with PCC (1:2:4) type C 1 (using 20 mm graded broken stone aggregate) surface finished even and fair complete all as specified and as directed.

S & F double wall corrugated high density polymer ethyl ( HDPE) pipe for laying of electric cable of 63 mm outer dia and 51 mm inner dia with conforming to IS- 14930 - 1 and 2, PE 63 of pressure rate 4 Kg/sq.cm laid in trenches ,wall, floor,pole including bends, sockets and other connected accessories complete all as directed and specified by Engineer-in-charge. Make:Dura Line/Tijaria/REX/Astral

Supply, Installations, testing ,commissioning LT outdoor panel board by CPRI approved manufacturer having internal dimensions not less than 45 X 45 X 30 cms with double door, only front side openable cubical type pedestal mounting type totally enclosed, fabricated with dust and weather proof and rating of IP 64 CRCA outer sheet of 3.00 mm thick and inner sheet not less than 2 mm as per IS, inner and outer compartment of Load Ball Bearing and 1.6 mm thick for non-load Ball Bearing suitable for 3 phase 4 wire system 415 volts bottom base channel of MS section not less than 50 mm x 50 mm x 5mm thickwith proper earthing arrangement. Finish of the panel shall be powder coated, dust & vermin proof of IP 65 compartment doors, all components mounted on iron sheet 2mm thick and having proper locking arrangement in both front including necessary foundation, brick/PCC masonary pillar in CM 1:6, plastering 1:4, 10mm thick with clearance atleast 1.2 m above ground level, including marking incoming , outgoing cables with glands etc name of feeders and comprising with supply and fixing of the following items and connecting and testing complete. (a) LCD Multifunction Meters Input voltage measurement range 3 x 240 VAC (-30% to 20%), Aux supply 90-300 VAC/DC,Flush mounting 96 x 96 mm ,CT/PT site programmable ,with RS485 port ,IMP, Automatic Electric Parameters: V, A, F, PF, kW, kWh with new set of CT's-01 No.s (5/1000) and 4 sqmm single core copper wire 60 RM approx Make L&T WL440511OOOO, IMP, Automatic Electric with necssary connectors etc.

M&L for point wiring using approved colour coding as per IS, with multistranded FRLS copper conductor 1.5 sqmm (nominal area) two single core PVC insulated and unsheathed multistranded cable 1100volts grade ISI-694 marked through and including heavy duty ISI marked , PVC casing and capping including all accessories, GI termal boxes 1.2 mm thick 60mm deep of suitable size sunken/ surface as per site requirement covered with modular white cover plate with frame suitable for housing modular switches , sockets, regulators etc including PVC insulated multistranded FRLS copper conductor 1.5 sqmm (nominal area ) single core cable as earth continuity conductor and connecting to the common earth dolly for one 3 pin 5 Amps socket outlet controlled by one switch on independent board complete all as specified and as directed.

S&F for wall mounted fan of size 400 mm sweep and connecting up including provision of cable from ceiling rose or connector to fan complete as specified and as directed.

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

Gauri Associates (BID ID -3108736)

M/S Eknath agencies (BID ID -3108117)

THE SAIRAM CONSTRUCTIONS (BID ID -3099456)

N AND G CONSTRUCTION (BID ID -3109322)

AJINKYA VIKRAM GAIKWAD (BID ID -3108991)

ANIL CONSTRUCTION CO. (BID ID -3108241)