Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.5 LAccepted-AOC C O UTTAM BANIK HAIDERPARA OPPOSITE TO WEST BENGAL REPRESENTIVE REST HOUSE P O HAIDERPARA SILIGURI 06 | JALPAIGURI | WEST BENGAL | 734006 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹50.5 L+₹1.2 L (2.40%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹51.4 L+₹2.1 L (4.19%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹51.7 L+₹2.4 L (4.81%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹52.0 L+₹2.6 L (5.31%)Rejected-Finance MOHANPUR PT LL HOUSE NO 00 CITY TOWN SILCHAR P O KATIRAIL P S KATIGORAH DISTRICT CACHAR PIN 788804 | CACHAR | ASSAM | 788804 | L5 | Rejected-Finance Not Lowest |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
11 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SEVOKE ROAD
GE Sevoke Road Post Salugara Dist Jalpaiguri PIN 734008
REPAIR TO JOINERY AND SUNKEN FLOOR PERIODICAL SERVICES AND ALLIED WORKS OF OLD JCO AND OR IN BANASINGH VIHAR AT SEVOKE STN UNDER GESEVOKE ROAD
2023_MES_576331_1
GE/SEV/84 of 2022-23
Open Tender
Civil Works
Item Rate
270 days
GE SEVOKE ROAD
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
GE SEVOKE ROAD
₹98,000
Yes
23 Feb 2023
21 Jan 2023
13 Feb 2023
21 Jan 2023
11 Feb 2023
4 Feb 2023
22 Jan 2023 - 31 Jan 2023
Amount
Taking down cement plaster on brick wall/concrete surfaces etc including racking out joints hacking for key scrubing down with water etc of any thickness including Dado any description complete all as specified and directed.
M&L for 15mm thick rendering on other than fair faces of brick or concrete surfaces in CM 1:6 finshed even and smooth without using extra cement complete all as specified.
M&L for 20 mm thick rendering on fair face of brick work in CM 1:4 in two layers of 10mm each using water proofing compound in top layer only including finishing the surface even and fair(WPC shall be measured and paid seperately) complete all as specified and directed.
M&L for rendering 5 mm thick in CM 1:3 as in ceiling finished even and smooth without using extra cement complete all as specified.
Supply only water proofing compound all as specified and directed.
M&Lfor 1.0 mm thick wallcare putty on internal surface of wall new/old surfaces complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with roller over a coat of primer All as specified and directed. .
M&L for preparation of new plastered surafce wall and applying one coat of primeseal primer of M/s Dr fixit or equivalent chemical of M/s STP Ltd as approved by GE or one coat of chemistic PDE 600 elastomeric coating (and allowing to dry for 8 hrs) under torch dry condition and subsequently applying two coats of water proofing decorative elastomeric coating system raincoat of M/s Dr fixit with DFT 100 micrones or shalicry 215 of M/s STP Ltd of chemistic PDE 600 elastomeric coating (the surfaces after painting one coat shall be allowed to dry for 6 to 8 hours before application of next coat) including necessary scaffolding etc complete all as per manufactures instructions and as directed. Note : The aforesaid treatment shall be got executed by the contractor from the authorised applicator of the manufactures and also necessary authenticated documents on account of above shall be submitted by the contractor to the GE.
M & L for preparation of new plastered surfaces of ceiling and applying three coat of white wash, complete all as specified and directed.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms moulds, mitred/stopped ends etc complete all as specified and directed..
Demolition of reinforced cement concrete work of any description and in any position not otherwise specifically provided for all as specified.
M & L for reinforcement with 8mm dia and over mild steel TMT bars cut to length bent to shape required incl cranking bending spirally for hooping for coloumns hooking ends and binding with MS wire (annealed) not less than 0.90mm dia complete all as specified.
M&L for RCC 1:2:4 type BI (using 20 mm graded mechanically crushed stone aggregate) nominal mix as in fins, facias,chajja,lintel etc complete all as specified and as directed.
M&L for use and waste form work to fins, louvers, fascia for fair finished surfaces of concrete, flat complete all as specified.
Taking down of PVC door or frames with shutter ( without taking off shutter from the frames ), area n. exc. 1.5 Sqm each complete all as specified.
Taking down chowkats with shutters (without taking off shutters from the frames) area exc 1.5 sqm but not exceeding 4.00 Sqm and refixing complete all as specified and as directed.
Taking down chowkats with shutters (without taking off shutters from the frames) area not exc 1.5 sqm complete all as specified and as directed.
Taking down chowkats with shutters (without taking off shutters from the frames) area exc 1.5 sqm but not exceeding 4.00 Sqm and refixing of old shutter in new chowkats complete all as specified and as directed.
Taking down, easing and adjusting refixing in same opening to the shutters including refixing of builder hardware and renewal of unserviceable screws complete all as specified and as directed.
Taking down shutters exc 1 sqm but not exceeding 2 sqm each complete all as specified and as directed.
Taking down and fixing in repair of old sheet windows exc sqm and n exc 2 sqm each after repair (like welding, exc 2.5cm but not exc 5 cm in length , streightening, binding and rebating etc) it and fix in same opening to the shutter complete all as specified and as directed.
S&F Mild steel hold fast made of flat iron conforming to Fe-290 Gde E-165 of size 25x 3 mm bent to shape required with splitting end and drilling holes for fixing nuts & bolts (including nuts & bolts) including treating the steel surfaces with tar or coal tar black paint and sanding neatly newly tarred surfaces with clean sharp sand complete all as specified and as directed.
S&F pressed steel frames (size-125X60mm) for doors with one or more rebate incl necessary fixing lugs, hinges, lock strike plate etc including providing one shop coat or red oxide zinc chome primer complete all as specified .
S&F pressed steel frames (size-105X60mm) for doors with one or more rebate incl necessary fixing lugs, hinges, lock strike plate etc including providing one shop coat or red oxide zinc chome primer complete all as specified .
S&F 30 mm factory made flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.
Supply and fixing 2nd class hard wood factory made 35mm thick glazed skeleton shutters, open rebated and prepared to receive glass, gauge etc. edges of framing, plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed.
S&F 100mm long butt hinges mild steel medium weight cold rolled etc complete all as specified and directed.
S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F for aluminum anodized barrel tower bolts of extruded section, 150mm long, ISI marked, complete all as specified.
S&F for aluminum anodized barrel tower bolts of extruded section, 125mm long, ISI marked, complete all as specified.
Fxing only old tower bolts 100mm long complete all as specified.
Fxing only mild steel sliding door bolts 150mm long complete all as specified.
S&F 300 mm aluminum alloy, anodized, sliding door bolts, ISI marked, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy, complete all as specified.
S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, including one coat of red oxide primer complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, including one coat of red oxide primer complete without glazing bars, dovetailed or welded complete all as specified and directed.
S&F Steel ventilator with top hung shutter including hinges, steel peg stay including one coat of red oxide primer complete complete all as specified and directed.
S&F PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube fixing in opening complete all as specified and directed.
S&F factory made soild panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed togehter with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and directed.
S&F 100mm long stainless steel but hinges complete all as specified and directed
Hacking out old broken glasses ( any thickness/type and in any position ) from wooden frames/metal frames fixed with oil putty or beads etc and removing from site complete all as specified and as directed
S&F sheet glass ordinary quality 3mm thick and glazing with oil putty and securing pins not exceeding 0.50sqm each pane complete all as specified and directed.
S&F sheet glass ordinary quality 3mm thick and glazing with oil putty and securing pins exceeding 0.50sqm each pane complete all as specified and directed.
S&F 3mm thick figured glass pin head type and glazing with oil putty in squares not exceeing 0.50 sqm in each pane complete all as specified and as directed.
S&F vitreous china squatting pan "ORISSA" patern of size 580x440mm white, with integral foot rests (excluding flushing cistern & flush pipe) including provisioning of lime concrete bedding complete all as specified.
S&F PVC valve less syphonic action type flushing cistern 10 ltrs capacity low level white with inlet, ball valve, float and handle including brackets complete all as specified.
S&F in repairs vitreous china ware wash hand basin white colour flat back of size 550x400mm including CI brackets, CP brass waste coupling 32mm etc complete all as specified.
Taking up or down 15 mm bore steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified.
Taking up or down 20 mm bore steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified.
Taking up or down 25 mm bore steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified.
Cutting chases in brickwalls girth exc 10 cm but n exc 20 cm , pinning in making good to facings where required and pointing in cement mortar 1:3 for conceled water tubing etc and making good complete all as specified.
Supplying and laying of 20mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. Note:- Quoted rate includes all plain CPVC fittings and pipe cuttings fixing with CPVC solvent cement and testing. Quoted rate do not includes for special fittings (CPVC Brass fittings). These shall be measured & paid under relevant items of this schedule.
Supplying and laying of 25mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. Note:- Quoted rate includes all plain CPVC fittings and pipe cuttings fixing with CPVC solvent cement and testing. Quoted rate do not includes for special fittings (CPVC Brass fittings). These shall be measured & paid under relevant items of this schedule.
S&F 20 mm dia brass Elbow for CPVC connection complete all as specified and directed.
S&F 20 mm dia brass Elbow (3/4" x 1/2") for CPVC connection complete all as specified and directed.
S&F 20 mm dia brass Tee in CPVC connection complete all as specified and directed.
S&F 20 mm dia male brass Threaded adaptor (MTA/MBTA) for CPVC connection complete all as specified and directed.
S&F 20 mm dia female brass Threaded adaptor (FTA/FBTA) for CPVC connection complete all as specified and directed.
S&F 20 mm dia brass union in CPVC connection complete all as specified and directed
S&F 15 mm bore medium grade galvanized steel water tubing with all fittings fixed to wall/ceiling or laid in floor complete all as specified.
S&F in repair Bip tap standard of PTMT any colour screwed for iron pipe 15 mm bore and fixed (Minimum weight 90gms) complete all as specified and directed.
S&F in repair Pillar tap standard of PTMT any colour screwed for iron pipe 15mm bore and fixed (Minimum weight - 110gms) complete all as specified and directed.
S&F in repair Stop Valve standard of PTMT any colour high pressure screwed for iron pipe 15mm bore and fixed (Minimum weight - 90gms) complete all as specified and directed.
S&F in repair 15 mm bore bib tap fancy type chromium plated cast copper alloy with capstan head wall flange screwed down screwed for iron pipe complete all as specified and directed.
S& F in repair 15 mm bore Angle stop cock (male of female thread) cast copper alloy, chromium plated fancy type with capstan heads, wall flange screwed down screwed for iron pipe complete all as specified and directed.
S& F in concealed 15 mm bore Angle stop cock (male of female thread) cast copper alloy, chromium plated fancy type with capstan heads, wall flange screwed down screwed for iron pipe complete all as specified and directed.
S&F in repair 15 mm bore Pillar tap cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without letter hot or cold with long screwed shank and flynuts screwed for iron pipe complete all as specified and directed.
S& F in repair 15 mm bore stop valve (male of female thread) cast copper alloy with crutch or butterfly handle complete all as specified and directed.
S&F in repair 15 mm bore Gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.
S&F in repair 20 mm bore Gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.
S&F in repair 25 mm bore Gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.
S&F in repairs 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball for iron pipe complete all as specified and directed.
S&F in repairs 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball for iron pipe complete all as specified and directed.
S&F in repairs of PVC connection pipe 15 mm dia 450 mm long with PTMT nut complete all as specified and as directed
S&F PVC waste pipe suitable for 32 mm dia waste coupling for wash hand basin complete all as specified and directed.
S&F PVC waste pipe suitable for 40 mm dia waste coupling for kitchen sink complete all as specified and directed.
S&F stainless steel grating 100mm dia over floor trap complete all as specified and directed.
S&F in repairs PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints fixed in walls or floor complete as specified and as directed.
S&F in repairs PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed in walls or floor complete as specified and as directed.
S&F PVC (SWR) bends any radius suitable for 110mm bore pipe provided with access door complete all as specified and directed.
S&F PVC (SWR) bends any radius suitable for 75mm bore pipe provided with access door complete all as specified and directed.
S&F PVC (SWR) 110mm Junction (Single T) equal or un equal provided with access door complete all as specified and directed.
M&L PVC (SWR) gully trap 125/110mm setting and jointed with solvent cement complete all as specified and directed.
M&L PVC (SWR) floor trap plain with grating including jointed with solvent cement of diametre 75mm complete all as specified and directed.
S&F PVC (SWR) 75mm bore junction (Single T) equal or unequal provided with access door complete all as specified and directed.
S&F in repair stainless steel sink without draining board, made out of 1.0mm thick sheet for kitchen or laboratory with plug washers waste pipe, cast iron cantilever brackests connecting union over all size 495mmx420mm with bowl size 410mmx330mmx160mm complete all as specified.
M&L for cleaning of water service tank (inside area only) of any description, including scraping, scrubbing (without damaging tank surface) deposits / scales, algae formations, silt /sticky matters adhering tank surface and washing inner tank surface with approved grade of chemicals complete, of capacity exc 250 liters n.exc 500 liters complete all as specified as directed. (i) On completion of cleaning of tank, date of cleaning to be marked/written clearly on tank surface in an accessible location with letters or figures n.exc 5 cm high viz (as per example) "TANK CLEANED ON………….". (ii) Cleaning of tank to be carried out in accordance with the schedule published for the purpose of cleaning of tank. (iii) During cleaning of the tanks, any vegetation and growth on the roof slab shall also be removed by the Contractor and the quoted rates are deemed to include for the same.
S & F in repair stainless steel tubular drapery rod 28mm dia complete as specified and directed.
S&F stainless steel brackets for drapery rod 28mm dia complete as specified and directed.
S&F stainless steel knobs for drapery rod 28mm dia complete as specified and directed.
Dismantling wall & ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness, including cover fillets, complete as specified and directed.
S&F 605X605mm anodised aluminium snap grid frame work for false ceiling including 2.5mm dia mild steel wire galvanized class 3, @ 60cm centre to entre and fixed to steel or wooden member including 4mm thick decorative type non asbestos fibre cement boards fixed or laid/ inserted to aluminium frame work as in ceiling complete all as specified and directed. Note:- The size of aluminium main and croos tee shall be 40mm x25mm x2mm and size of angle shall be 25mm x 25mm x 2mm)
M & L in repairs 18/19 mm thick pre-laminated particle board exterior grade pre-laminated one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work as in cup board shutters, partitions and shelves complete as specified and directed.
M & L in repair 18/19mm thick block boards grade 1 quality exterior grade commercial type fixed with screws to timber frame work as in cup board shutters, kitchen cabinets, shelves etc complete as specified and directed.
M & L for external teak wood lipping 6mm thick and 18/19mm wide for block boards fixed with nails complete as specified and directed.
M & L for 1st class hard wood fillets area exc 3 sqcm but n.exc 6 sqcm wrought square or rectangular in section plain or bull nosed, splayed, chamfered or rounded on one edge or face fixed with nails complete as specified and directed.
S & F continuous (Piano) hinges mild steel bright finish or electro galvanised width of flaps when open 30mm complete as specified and directed.
S&F aluminum anodized barrel tower bolts of extruded section, 75mm long, ISI marked, complete all as specified.
S&F 75mm long Aluminium handle cast type anodised complete all as specified and directed.
S&F Hasp and staple , mild steel , wire type, stove enemelled black, including bolt to hinge plate and fixed with screws complete all as specified and dirtected.
Dismantling of structural steel work complete all as specified and as directed.
S&F rolled mild steel sections any type including hollow section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates FE -290 Gde E-165 complete all as specified and directed.
Dismantling (corrugated, semi corrugated, etc) sheets in roof coverings complete all as specified and directed.
S&F pre- painted gavalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.
S&F pre- painted gavalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.
S&F Mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm & fixed with stainless steel wire staples complete all as specified and directed.
S&F in repairs Mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm & fixed with stainless steel wire staples complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new primed steel surfaces exceeding 10cm in width or girth complete all as specified and directed.
S&F stainless steel plate rack of size of 0.80mx0.75m made out of 1.00 mm thcik sheet for kitchen fiixed to wooden plugs with chromium plated brass screws complete all as specified and as directed.
M&L for preparing old decorated plastered or un-plastered surfaces of walls including pilasters and cornices etc by brooming down or steel wire brushing scrapping down smoke soot ,moulds ,moss and efflorescent salt and trading oil and greasy spots and applying one coat of cement based paint treatment complete all as specified and directed.
M&L for complete removal of exist treatment of wall and applying two coats antifungal exterior paint (of shade/colour as directed by GE) over 1mm wall care putty and one coat of primer all as per manufacturer instruction including scaffolding etc complete as specified and directed.
Preparation of old decorated plastered or un-plastered surfaces of walls including pilasters and cornices etc by brooming down or using steel wire brushes with scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil and greasy spots etc and applying 2 coat of distempering inclding putty of 1mm thickness over wall , complete all as specified and as directed.
Preparation of old painted wooden or wooden based surfaces of any description Over 10cm width or girth and applying one coat of synthetic enamel paint all complete as specified and as directed.
Preparation of old painted steel or iron surfaces as of any description over 10 cm in width or girth not otherwise described and applying one coat of Synthetic enamel paint complete all as specified and as directed.
S&F 1.25 mm rolling shutters,with out ball bearing ,as specified including top cover ,ancoring rod ,hasp and staple and one shop coat of primer erected in position as indicated,complete push pull or manual type complete all as specified and as directed.
Re-writing letters or figures (Block, Romans, Italic, or Indian) not exc. 30 cm height & average height 15 cm with thick synthetic enamel paint complete all as specified and as directed
M&L for preparation of old decorative plastered or un plastered surface of walls including pilasters and cornices etc brooming down by using steel wire brushes scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white washing complete all as specified and directed.
M&L for preparation of old surfaces of ceiling and applying two coats of white washing complete all as specified and directed.
Taking down chowkhats or frame exc 4sqm but n exc 10 sqm but with shutters (without taking off shutters from the fame) complete all as specified and directed by Engr in Charge.
Demolition of tiles /cement concrete (unreinforced) from existing roof/terrace etc and also removing/taking down of existing water proofing treatment of any thickness in any position including cleaning the surfaces of roof etc with wire brush complete and removing the retreived debris in low lying area, all as specified and directed.
M&L for special treatment for sunken portion of WCs/ Bath & toilet executed in following stages:- Stage 1 :- Demolition of WC including lime concrete and cement concrete coba etc and preparing the surfaces of existing sunken portion of WCs or bath etc with wire brush to remove all loose dirt, oil grease etc including removing debris outside MD land etc . Stage 2:- Providing 10mm thick plaster in CM 1:3 mixed with integral water proofing chemical of Dr. Fixit Pidicrete URP or plaster seal of STP Ltd in the proportion/quantity all as per Manufacture's instructions.Complete. Stage 3:- Apply Dr Fixit Primeseal primer or Equivalent of STP Ltd (and allow to dry for 8 hours) all as per Manufacture's instructions. Stage 4:- Apply two coats of water proofing elastomeric coating system of Dr Fixit Raincoats with DFT 100 Micron or shalicry 215 of STP (The surface after painting one coats shall be allowed to dry of 6 hours before next coats) all as per Manufacturer's instructions. Stage 5:- Rendering 10mm thick in CM 1:3 mixed with Integral water proofing chemical Dr Fixit Pidicrete URP or plaster seal of STP Ltd all as per Manufacture's instructions. Stage 6. All CI joints shall filled with mixture of cement fine sand and plaster seal of STP Ltd or Dr Fixit pidicrete URP all as per Manufacture's instruction. Stage 7:- Making holes in wall and fixing 600mm long 40mm dia medium grade GI spout for draining the surplus water if any . Stage 8:- Carry out ponding test for 48 hours to ensure water tightness of repaired sunken portion water tightness of repaired sunken portion and filling of sunken portion for cement concrete Type E2 1:5:10 using 40 mm graded aggregate as in lean concrete complete all as specified and directed. Note :- (a) Only plan area shall be measured and accorded for payment under this item. (b) Depth of sunken portion of WC's/Baths shall be upto 35cm, which is to be taken into account while quoting the rate against this item. (c) Rate quoted by Contractor shall be deemed to be included for all the horizontal and verticale treated surfaces of sunken portions of WC & Bath.
S&F PVC floor trap with grating incl jointing to waste pipe of 75 mm dia in and including jointing with solvent cement complete all as specified and directed.
M&L for preparation of roof surfaces to be free from frost, surface laitance and contamination free from loose aggregate or other sharp protrusions with fairly smooth finish for applicaion of water proof coating prime the surface with water. In cluding removal of all existing treatment, bituminious membrane, tarfelt.screed concrete etc from rcc slab
Application of waterproofing Coating on roof surfaces as under :- Providing and applying Fosroc Brushbond Roof Guard, a single component High build fibre Reinforced Acrylic Waterproofing render for roofing system to be applied by brush, at three coats at minimum dry film thickness of 1 mm, which should cure by reaction with atmospheric moisture to give a tough elastomeric waterproof membrane. Solid Content - 70%, Tensile strength ASTM D 412-1.10 Mpa, Elongation ASTM D12-100%, Resistance to ageing due to - 1000hours, UV radiation ASTM D4587 E - No Change, Rapid Chloride Penetration ASTM c 1202 - Very low, Pull off adhesion ASTM D541 - 0.92 Mpa, Resistance to Algae growth ASTM D 5589-97 - Passes, Zero rating, Permeability (mm) (BSEN 12390 part 8) -n 5.0, Water vapour transmission (ASTM E 96) - 6.0g/m2 h
S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.
M&L 20mm thick granite slabs of any type (table rubbed and polished) on cooking platforms set and jointed in net cement slurry and pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite including necessary moulding at edges laid over and including 20mm thick cement mortor screed bed in cement mortor (1:6) complete all as specified and directed.
M&L for non skid ceramic coloured tiles 8 to 10mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles floor complete all as specified and directed.
M&L for Glazed ceramic tiles in vertical surface 300X200X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed .
M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in skirting etc. Set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with and including 10 mm thick screed bedding layer of CM 1:3 for laying of floor finishes complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded mechanically crushed stone aggregate) as in plinth protection/footpath, surface to be finished even and smooth without using extra cement laid in alternate bays and joint to be filled with bitumen filler complete all as specified and directed.
Engineers India
SRI SURAJIT SENGUPTA
BIJAN KUMAR DHAR
M/S BHARAT CONSTRUCTION
M/S S.B. CONSTRUCTION
Raj Enterprise
ASSOCIATED TRADING CORPORATION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .