Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.5 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹37.7 L+₹1.9 L (5.31%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹37.8 L+₹2.0 L (5.51%)Rejected-Finance FLAT NO 1004 BUILDING NO L 11 KEDAR HOUSING SOCIETY 10TH FLOOR SECTOR NO 21 TALOJA PHASE 2 PANVEL RAIGAD NAVI MUMBAI 410208 | NAVI MUMBAI | RAIGAD | MAHARASHTRA | 410208 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹40.6 L+₹4.8 L (13.5%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | Rejected-Technical | - | Rejected-Technical Due to Personal Cheque found uploaded instead of DD / Banker cheque for Tender fees. |
Tender Value
₹44.3 L
EMD Value
₹88,600
Closing Date
15 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Nasik Road
Garrison Engineer Nasik Road AOP ComplexNear AOP Gate PO Gandhinagar Nasik 422006
As per Tender Documents
2023_MES_603720_2
GE/NRC/8960/E8
Open Tender
Civil Works
Item Rate
270 days
Garrison Engineer Nasik Road
As per NIT
8 documents required · 8 mandatory
₹500
Garrison Engineer Nasik Road
₹88,600
Yes
20 Sept 2023
25 Jul 2023
17 Aug 2023
25 Jul 2023
15 Aug 2023
1 Aug 2023
Amount
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store for refixing at existing places complete all as specified and directed by Engr-in-Charge.
Hanging only ceiling fan after completion of ceiling fan point wiring work of any size and sweep in proper manner and connecting up including provision of cable from ceiling rose or connector to fan all as per specified and directed by Engr-in-Charge
Dismantling unserviceable main switch/DBs with MCBs and wooden board including making good disturbed surface of wall by applying cement work, brick work and matching colour (Oil bond distemper) etc. complete all as specified and directed.
Taking down sub main wiring of any size/capacity complete with pipe/casing caping patti all as specified and making good to disturbed sufaces to match with the existing surfaces complete all as specified and directed.
M&L for point wiring with PVC insulated unsheathed stranded copper conductor FRLS cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including, medium grade surface steel conduit stove enamelled not less then 20 mm width with MS sheet metal sunken switch/Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified. Note : (a) Cutting chases and making good to match with the adjoining surface shall be included in the unit rate. (b) Ladder, safty belt and other safty eqpt to be provided by contractor at no extra cost.
All as per Item No. 06 for One light point controlled by one, one way switch
All as per Item No. 06 for One ceiling/ exhaust/ wall fan point controlled by one switch and regulator
All as per Item No. 06 for One 3 pin 5 amp socket out point on the same board with other switches.
All as per Item No. 06 for One 3 pin 5 amps socket out let point on independent board.
All as per same in item No 06 above but for one socket outlet 15 amp on independent board with 2.5 Sqmm cable and 2.5 Sqmm. earth wire.
M&L for Point wiring with PVC insulated unsheathed stranded copper conductor FRLS cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including, PVC medium grade surface casing capping not less then 20 mm width with MS sheet metal sunken switch/Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified. Note : Cutting chases and making good to match with the adjoining surface shall be included in the unit rate.
All as per Item No. 12.00 for One light point controlled by one, one way switch
All as per Item No. 12.00 for One ceiling /exhaust fan point controlled by one switch and regulator.
All as per Item No. 12.00 for One 3 pin 5 amp socket out point on the same board with other switches.
All as per Item No. 12.00 for One 3 pin 5 amps socket outlet point on independent board.
All as per Item No. 12.00 for One bell/buzzer point controlled by one bell push.
All as per same in item No 12 above but for one socket outlet 15 amp on independent board with 2.5 Sq. mm cable and 2.5 Sq.mm. earth wire.
Supply and fixing Switch piano flush type single pole one way 5 amps.
Supply and fixing Socket outlet 2 in 1, 3 pin, 6 Amps.
Supply and fixing Switch socket combination 2 in 1, 6A flush type.
Supply and fixing Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal.
Supply and fixing Ceiling rose, 3 phase/PVC/polycarbonate, isolated body.
Supply and fixing Bell, Ding Dong AC, 230 volts, single pole.
Supply and fixing Bell push, flush type, 5 amp.
Supply and fixing electronic regulator 100/120 Watt step type.
S &F Lamp holder insulated body with back plate for angle holder including 9 W LED invertor Lamp all as per specified and directed.
Supply and fixing of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
Supply and fixing in replacement of industrial wall mounted socket including industrial plug 32A, 3P+N+E complete with MCB TP 32 amp.
Supply & fixing in replacement of industrial wall mounted socket including industrial plug 63A, 3P+N+E complete with MCB TP 63 amp.
Taking down and fixing of rusted/old vintaged down rod of LED highbay light fittings (Hangar) including provn of new GI down rod upto 3.00 Mtr of 15mm bore with appropriate size of chain connected by means of bolts, nuts, check nuts and washers, complete all specified and directed by Engr-in-Charge. Note: Ladder, safety belt and other safty eqpt to be provided by contractor at no extra cost.
Material, Labour and testing for U- PROTEC Chemical Earthing Electrode Copper Bonded 17.2mm x 3 mtr long, 250 Micron with ground enhancing blackfill compound (safe ground). The charastricts of this compound is highly conductive, hygroscopic, non magnetic, non corrosive in nature and have best moisture retaining qualities (each rod = 25 kgs 2 bag), complete with two bag of black fill compound mixed with soil all around the earth pipe for smooth charge dissipation complete with bricks wall earth pit of size 450mmx450mm with RCC pit cover all as specified and directed. Note :- (i) If Earth resistive value will not achieved less than 1 ohm, then contractor should re-done of chemical earthing at no extra cost. (ii) Earth strip will be measured and paid separately.
Material , Labour and testing for U- PROTEC Chemical Earthing Electrode Copper Bonded 25mm x 3 mtr long, 250 Micron with ground enhancing backfill compound ( Safe ground). The charastricts of this compound is highly conductive, hygroscopic, non magnetic, non corrosive in nature and have best moisture retaining qualities. ( Each Rod = 25 kgs 2 bag), complete with two bag of black fill compound mixed with soil all around the earth pipe for smooth charge dissipation complete with bricks wall earth pit of size 450mmx450mm with RCC pit cover all as specified and directed. Note :- (i) If Earth resistive value will not achieved less than 1 ohm, then contractor should re-done of chemical earthing at no extra cost. (ii) Earth strip will be measured and paid separately.
M&L forsoil resistivity testing for desire value of soil complete all as per satisfaction of Engr-in-Charge.
S&F in repairs galvanized earth strip 32 mm x 6 mm for earthing from earth plate to equipment complete fixed on porcelain insulator every 1 meter interval all as specified and as directed.
M&L in repair for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw. Note: Ladder, safety belt and other safety eqpt to be provided by contractor.
M&L in repair Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed by Engineer in Charge.. Note : Ladder, safety belt and other safety eqpt to be provided by contractor.
M&L in repair for Air termination, single pointed, copper rod 12mm dia and 300mm long. Note: Ladder, safty belt and other safety eqpt to be provided by contractor.
Supply and fixing in repairs air termination, single pointed aluminum rod 12mm dia and 300mm long complete all as specified and directed. Note :Ladder, safety belt and other safety eqpt to be provided by contractor.
Fixing in repairs aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed. Note : Ladder, safety belt and other safety eqpt to be provided by contractor.
S&F in repair SP&N enclosure with 2 pole, 240 volts and earth metal plug & socket for incorporating 20 A SPN MCB complete all as specified and directed. Note :- MCB 20 Amp SPN rate incorporated in this item.
Supply and fixing LED lights fitting 1x 20W, 220V, AC, decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete..
Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete..
Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete..
S & F in repair 150W, highbay light with electronic driver and other connected accessories, IP 65 including connecting up with twin core twisted flexible copper conductor cable with suitable size, 230V, 50Hz, complete all as specified.
S & F 35 Watt LED street light fitting luminaire made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 , including coneecting up with 2/3 core flexible coppper conductor cable , compete all as specified and directed by Engr-in-Charge.
Fabrication, supply & fixing of GI pipe bracket up to 25 mm dia- 0.9m long & 2 set of clamps made out of 30x5mm ms flat & fixed with anchor bolt suitable for 35 Watt LED security light fitting
S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm including 3 core copper cable & cutting holes/ circular opening in brick, stone wall and making good to disturbed surfaces if required etc, complete all as specified and directed by Engr-in-Charge.
Supply and fixing ceiling fans complete with blades, down rods, iron angel from ceiling to rubber real gatta, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 2.5 Sqmm, earth continuity conductor of size 2.5 Sqmm to be drawn through and including PVC CASING CAPING not less then 20mm width medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 2.5 sqmm and one wire of 2.5 sqmm for earthing and one run of PVC casing/caping shall be measured as one unit. Ladder, safty belt and other safety eqpt to be provided by contractor.
M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sqmm, earth continuity conductor of size 4 Sqmm to be drawn through and including PVC casing capping not less then 32mm width medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 4 sqmm and one wire of 4 sqmm for earthing and one run of PVC casing capping shall be measured as one unit. Ladder, safty belt and other safety eqpt to be provided by contractor.
M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 6 Sqmm, earth continuity conductor of size 6 Sqmm to be drawn through and including PVC casing capping not less then 32mm width medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 6 sqmm and one wire of 6 sqmm for earthing and one run of PVC casing capping shall be measured as one unit. Ladder, safty belt and other safety eqpt to be provided by contractor.
M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 2.5 Sqmm, earth continuity conductor of size 2.5 Sqmm to be drawn through exsisting steel conduit any make and type fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 2.5 sqmm and one wire of 2.5 sqmm for earthing shall be measured as one unit. Ladder, safety belt and other safty eqpt to be provided by contractor.
M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sqmm, earth continuity conductor of size 4 Sqmm to be drawn through exsisting steel conduit any make and type fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 4 sqmm and one wire of 4 sqmm for earthing shall be measured as one unit. Ladder, safty belt and other safty eqpt to be provided by contractor.
M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 6 Sqmm, earth continuity conductor of size 6 Sqmm to be drawn through exsisting steel conduit any make and type fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 6 sqmm and one wire of 6 sqmm for earthing shall be measured as one unit. Ladder, safety belt and other safty eqpt to be provided by contractor.
S&F Air Circulator fans 230 volts single phase oscillating 600 mm sweep suitable for wall mounting including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge.
S & F 4 way TP&N Vertical Loadline DBs in double door suitable for TP/FP MCCB with Range upto 160 A , breaking capacity : 10 kA / 16 kA / 25 kA , Bus Bars, Neutral Links, Blanking Plates without out MCCB, HSN Code - 8537, complete all as specified and directed by Engr-in-Charge,
S & F 8 way TP&N Vertical Loadline DBs in double door suitable for TP/FP MCCB with Range upto 200 A , breaking capacity : 10 kA / 16 kA / 25 kA , Bus Bars, Neutral Links, Blanking Plates without out MCCB, HSN Code - 8537. complete all as specified and directed by Engr-in-Charge,
S&F Sheet metal enclosure factory made for DBs Triple pole and neutral double door 415 volts 4 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.
S&F in repair Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 12 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.
S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 8 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.
S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 4 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.
S&F for MCB TPN 415 Volts, 'C' series, breaking capacity 10 KA of rating 63Amps complete all as specified and directed by Engineer-in-Charge.
Supply and fixing of MCB, single pole and neutral, 240 Volts, 40-63 Amps, 10 KA breaking capacity complete all as specified and as directed.
Supply and fixing of MCB, single pole and neutral, 240 Volts, 6 to 40 Amps, 10 KA breaking capacity complete all as specified and as directed.
Supply and fixing of MCB, single pole, 240 Volts, 40 Amps, 10 KA breaking capacity complete all as specified and as directed.
Supply and fixing of MCB, single pole, 240 Volts, 6-32 Amps, 10 KA breaking capacity complete all as specified and as directed.
Supply and fixing in repairs MCCB, 125 Amps , 415Volts, 16KA ,4 pole.
S & F in repairs MCCB, 100 Amps , 415Volts, 16KA ,4 pole.
Taking down and fixing partly unserviceable highbay down light fittings from hangers/ light fitings from wall of buildings/hargers of any make and type for necessary repair includirg ractifing any kind of electronic disorder/Circuit disorder/replacement of LED strip/spiral bulb, all other accessories and make it serviceable , complete all specified and directed by Engr-in-Charge. Note: (1) Ladder, safty belt and other safety eqpt to be provided by contractor. (2) Spare i.e driver shall be measured seperately.
S&F in repairs electronic driver 150 Watt suitable for highbay down light fittings for Hangers and security light fittings , all as specihed and directed by Engr-in-Charge
For Existing Hangar Door (6 Leaves Of 3.7mw X 6.2mh ) Maintenance & Modification Of Existing Door : Dismantle- Existing Doors From Its Position by means of crane and taking down all hanger doors from its postioin. Complete Of Leaf Size 3.7 Mtr X 6.2 Mtr Each. ( Left Side 3 Leaves At A Time And Right Side 3 Leaves Second Time )- 2 Set, Supply & fix replacement, Bottom Wheels & Top Rollers-2 Set, Maintenance/Replacement Of Rollers, Fasteners, Axels-12 Nos , supply & replace & Fixing- All Bearings & Cirlips Nut Bolts Etc & Fulfill The Requirement - 24 Nos , Maintenance/Replacement Of All Wheels, Fasteners & Axels-12 Nos, Replacement Of All Bearings Of Wheels-24 Nos, Change & Modify Drive Wheel To Motorise- 2nos, Dismantle Sheets On Door Leaf, Fabrication Of Steel Parts, Grind Corroded Parts And Welding Spots & Re-Paint The Door Leaves By Two Coat Of Same Color Paint Of Asian Paint & Re-Install The Sheets On The Leaves By New Self Tapping Screws/Existing J-Hooks. Modify The Pull Push Clits On Leaves Rubberise The Clits To Absorb Engage Impacts. Install Brushes To Clean Bottom Rails. Modify The Drive Wheel Door Leaf For Drive System To Motorise The Door - 02 Set (6 Leafs), Check Top Rollers Guide Rail & Bottom Wheel Rail - Alignment & Parallelism To Make It Maximum Possible True Position To Smoothen The Operation Of Leaves -6 Set, Assemble & Align Existing Door (6 Leaves With Crane ) At It's Position. Supply and install with fixing arrangements soft starter of make (L&T) specifications(9A, 3HP) Make : L&T / Emco. Note :- Rates are including with nuts, bolts, washer of 8.8 grade with consumables oil (Grade SP-320) for filling gear box , castrol grease, arc welding machine, welding rod and other machines etc required at site.
Continued item no. 74.00 Drive system/motorized operation :(provision of raw material/manufacturing, supply, erection & commissioning) : geared motor with chain drive-2 set, electric induction 3 PH, motor- 3 HP as per site requirement 1440rpm heavy industrial duty, Crompton make, model No.19.7.23 not less than 3 HP, 3 Phase, hinged mounted heavy industriel class. make.-02 nos, high efficiency speed reducer - 1:80 oil lubricated-02 nos, chain 3/4" with sprockets dia.90mm & 180mm-02 set, extended shaft on both sides for handle -R250mm for manual operation in case of electric power failure - 2 nos. Handles R250-2nos brackets & foundations, sheet metal cover. Steel base frame-2 nos Gear Box : the quoted rates are including with fixing arrangement of motor, gear box and also manufacturing of pair of bevel gear, helicacl gear Train for reduction ratio to achieve speed of 1:80 electric motor including supply and manufacturing of required shafts to in the design from motor shaft chain sprockets with chain drive.
Continued item no. 74.00 Supply, Fixing, testing and commissioning outdoor type panel fully enclosed weather protected complete with all electrical material & conductors (tentative : as will be changed as per requirement ) all as specified and directed by SDO or Engineer in Charge of site Polycab 2.5mm x 4C copper flexible cable 50 RM Polycab 1.5mm x 3C copper flexible cable 30RM Polycab 1.5sqmm x 1C copper flexible cable 30RM 3TF32 contactor- Siemens-04 nos Overload relay 3UA50 00-1G OLR (4-6.3A) Siemens-02 nos Aux. Cont. Block no 3TX4010 Siemens-04 nos Aux. Cont. Block nc 3tx4001 Siemens-04 nos Mimic contactor with buzzer 220V for forward and reverse motion -02 (forward plus reverse) 3UX1418 mounting kit Siemens-02 nos Push buttons Technic-04nos NO & NC add. Block for Push button Technic- 10nos Emergency Push button switch Technic 2AML4-02 nos 16A 4P MCB 5SL64167RC with enclosures Siemens -04 nos
Continued item no. 74.00 Indicator R/Y/B 220V Ideal -06 nos PVC cable tray 25mm x 25mm -04 rm CW CTS 10mm Connector-20 nos CW end plate 6/10 un-06 nos End clamp JUEC/101-10 nos PG16mm PVC Gland-04 nos Insulation tape R,Y,B,G- 06 nos CU pin lug 1.5 sqmm MGP1-100 nos CU Ring lug 1.5 sqmm ID6 7011-24 nos CU Pin lug 1.5 sqmm MGP-9-200 nos Cable tie 100mm pkt-02 nos Cable tai 200mm pkt-02 nos Limit switch ID8108 Ideal-04 nos Panel container of size 300mm x 400mm x 150mm of 1.6mm thickness -02 nos Cable carrier medium grade surface steel conduit stove enameled not less than 25mm including all accessories-32RM MCB channel-02 nos 6A SP MCB 5SL61067RC Siemens -02 nos MCB panel box 150 x 100 x 100-02 nos Flexible conduit pipe & accessories -10 rm Earthing wire- 15rm Rolling cable carriers PVC-18 nos Wire rope dia. 8mm with clamps 18rm Tension bolt & Steel fabricated brackets-02 nos
M&L for Earthing complete with copper steel earth plate electrode 60cm x 60cm x 3mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to the coper strip 25 x 3mm, by means nut bolt, nuts, check nuts and washer of the copper earth strip protected by provision of GI light grade pipe 40mm thick cover with RCC (1:2:4) reinforced with XPM (weight not less than 4g /Sqm) and frame of angle iron 25mm x 25mm x 3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, Gl light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, taste point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filing in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified incl testing on completion. Note: (i) Earth strip will be measured and pair separately. (ii) If earth resistance value will not achieve less than 1ohm, then contractor should re-done of earthing at no extra cost.
Structural steel sections & plates for replacement of part of highly corroded steel sections of existing door panels, as required on site all as specified and directed by Engineer-in-Charge.
GI/Pre coated color coated sheets not less than 0.45mm thick, for replacement of part of highly corroded pre installed GI/Pre coated pre-installed sheets on door panels, as required on site all as specified and directed by SDO Note:- (a) Design of above drive system should be verified by govt approved chartered engineer before after manufacturing (b) Contractor should submit approved design of gear box & motor duly verified by govt approved chartered engr to Engineer - in - charge. (c) Contractor should submitted certificate from govt approved chartered engr for complete inspection of doors for running safety of man machines & materials.
NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS.30,971.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.
M/S SVOJAS ELECTROMECH ENTERPRISES
M/s ASPIRE ENGINEERING ENTERPRISES
LAKARIYA ENTERPRISES
Bidder Name
LAKARIYA ENTERPRISES
M/S SVOJAS ELECTROMECH ENTERPRISES
SAFFRON ENGINEERS
M/s ASPIRE ENGINEERING ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .