NIT NO. 18(M3)ITEM NO.5

Supply of pump SHM 150 x 26 pump having Head 14 Mtr & discharge 350 m3/Hr. or equivalent complete with the base frame and suitable capacity of 30 H.P motor 1440 RPM or equivalent Make of pump KBL/M&P DJB approved & Make of motor: - CG / ABB / KEC / Approved

Making and Supply of outdoor type feeder pillar of size 1200 X 900 X 350 mm made of 14/ 16 SWG MS sheet 35 X 35 X 3 mm thick angle iron and 25 X 3 mm thick flat iron frame sloping at top cover hang for protection against rain/ weather, pad lock arrangement, breather mesh on both sides with louvers, including connections, interconnections with copper conductor cables, suitable for 2 Nos. 30 HP motors, painting the feeder pillar with 2 coats of red oxide primer and two coats of superior quality synthetic enamel paint, danger notice plate, sign writing, earthing etc. i/c mounting the feeder pillar on brick masonry pedestal of ammonium 45 cm height above ground level with 3" (75 mm) bed of 1:3:6 cement concrete and cement plaster on the brick portion, providing & fixing following accessories etc. there on as required. 160 AMP 50 Ka MCCB 1 No. Extended Rotary Handle 1 No. Rotary Changeover Switch of suitable rating 1 No. Spreader Link 1 Set 30 - 50 A, Over Load Relay 2 Nos. Motor Protection relay 200 MPR 2 No. Single Phasing Preventer 3 Nos. Heavy Duty Capacitor 7.5 KVAR 440 V 63 A, 10 kA, TP MCB 1 No. 10 A, 10 kA, TP MCB 1 No. Digital Volt Meter 1 No. Digital Amp Meter 03 Nos. CT 100/ 5 A 6 Nos. TP LED Ammeter 1 No. LED Indicating Lights R-Y-G 3 Nos. LED Indicating Lights B 1 No. 6 A SP MCB 3 Nos. 32 A DP MCB 1 No. ASS & VSS 4 Nos. Phase sequence relay Other material required like insulators, heat shrinkable sleeve, Bakelite, nuts & bolts, aluminum thimbles, ferrules, rubber packing etc. as required. Make of insertions/switchgears: -L&T/BCH/ SCHNEIDER/ MINILEC/AE

Supply of Manually operated oil immersed sheet steel clad wall mounting star – Delta Starters fitted with 1 No. Under voltage release, 3 Nos. Magnatic Overload Release with Oil Dashpot time lags, stop leaver, plain enteries for PVC cables suitable for Squirrel case induction motor 415 V, 3 Phase, 50 Hz, 15-30 HP Heavy Duty Make: - Advance, Bentax or any approved in DJB

Supply of 10 mm single core copper conductor cable. Make: Havells /Kalinga/DJB Approved. SOR 43.1.5

Supply of MS pipe 250 mm dia 6.35 mm thick Make: Jindal/TATA.

Supply of M. S. pipe 150 mm B class make Jindal/TATA.

Supply of M.S. bend of 250 mm dia, 900 heavy duty.

Supply of M.S. flange 250 mm dia 20 mm thick duly machined.

Supply of M.S. bend of 150 mm dia, 900 heavy duty.

Supply of M.S. flange 150 mm dia 20 mm thick duly machined.

Supply of Main switch 100 Amp. Make / L&T / Havells/ BCH / Approved

Supply of girder 200 mm

Supply of 150 mm dia CI double flanged Sluice Valve, P.N- 1.0 Make Kirloskar/IVC / Approved

Supply of 150 mm dia CI double flanged NRV, P.N- 1.0 Make Kirloskar/IVC / Approved. SOR 4.9.7

Supply of 250 mm dia CI double flanged Sluice Valve, P.N- 1.0 Make: - Kirloskar/IVC / Approved

Supply of 250 mm dia CI double flanged NRV, P.N- 1.0 Make Kirloskar/IVC / Approved. SOR 4.9.9

Supply of fabricated brackets for erection of pipe in the channel.

Supply of S.S. pressure gauge with fitting Make:- H. Guru/ Fibeig/ approved by DJB

Supply of Bolts and nuts 300mm in length or as required at site SOR 45.1.54

Supply of Neoprene Rubber sheet. SOR 22.6.1

Fabrication/Erection of the delivery pipe/ bends/ Brackets after cutting , welding , finishing the surface area, fixing the flanges duly welded from both sides of the pipes as per site requirement without cutting the road inside the channel including installation of above pump set, panels & other equipments.

Fabrication / Fixing of Metro sheet / G.I. sheet Shed tin shed with M.S angle and grouting of angles. Fabrication of frame with proper painting work with the help of J-Hooks along with bitumen washer etc. including RCC flooring in entire shed for sitting arrangement for the operating staff for safety / security of pump sets & panels along with installation of 100 AMP four pole ELCB as per site requirement & lighting & fan arrangement.

Painting the complete structure with two coats of anti corrosive paint.

Testing & commissioning of above system first at NO LOAD &then at ON LOAD and for its proper operating as per the satisfaction of engineer in engineer.

To & fro charges.

SANJAY SALES CORPORATION