Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.6 LAccepted-AOC | L1 | Accepted-AOC AOC PLACED ON L1 BIDDER WITH CONTRACT AGREEMENT NO GE/SHL/54 OF 2022-23 | |
| 2 | L2₹28.7 L+₹1.9 L (7.21%)Rejected-Finance C O EROS PALA EAST LABAN ROAD SHILLONG 793004 | EAST KHASI HILLS | MEGHALAYA | 793004 | L2 | Rejected-Finance REJECTED BEING L2 BIDDER |
Tender Value
₹26.2 L
EMD Value
₹52,400
Closing Date
21 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SHILLONG
GE SHILLONG SHILLONG DIVISION PIN 793002
PROVN OF CERTAIN ADDN ALTN IN BLDG NO MES 67A AND PROVN OF ADDITIONAL GEYSER 25 LTR 80 NOS FOR PINE WALK AREA AND ANJALEE COMPLEX AND PROVN OF HEATING AND COOLING ARRANGEMENT 3 NOS AT 101 AREA UNDER GE SHILLONG
2022_MES_507013_13
GE / SHL / 75 OF 2021-22
Open Tender
Civil Works
Item Rate
240 days
GE SHILLONG
ALL AS PER TENDER DOCUMENT
8 documents required · 8 mandatory
₹500
Yes
GE SHILLONG
₹52,400
Yes
16 Feb 2023
8 Oct 2022
22 Oct 2022
8 Oct 2022
21 Oct 2022
8 Oct 2022
Amount
Dismantling of plain or corrugated steel sheeting any guage thickness including Nainital or similar pattern roof covering complete all as specified and directed.
Demolition of brick or solid concrete block walling built in cement mortar etc complete all as specified and directed.
Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed by Engineer-in-Charge.
Dismantling of wall/ceiling boards of any description (fibre, pulp,insulation, etc.) or insulation boards/ slab/blankets, any thickness including cover fillets complete all as specified and as directed.
Dismantling of floor hearth or wall tiles including cement mortar bedding (but not backing) removing serviceable to store and rubbish of the premises complete all as specified and directed.
Taking down chowkats or frames n. exc. 1.5 Sqm each (without taking off shutters from the frame) and removing from site complete all as specified and directed.
Taking down chowkats or frames exc. 1.5 Sqm but n.exc 4 sqm each (without taking off shutters from the frame) and removing from site complete all as specified and directed.
Taking down shutters of any description exc. 1 Sqm and n. exc. 2 Sqm each and removing from site complete all as specified and directed.
Taking down cement plaster on brick or concrete surfaces in anyposition including raking out joints, hacking for key, scrubbing down with water etc, Including removal of debries out side MD land all specified and directed by Engineer-in-Charge.
Excavation in trenches in soft / loose soil n.exc 1.5m wide and n.exc 1.5m in depth; for foundation etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out etc complete all as specified and directed by Engineer in Charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 Cm thick as in any type of soil etc complete all as specified and as directed by Engineer in Charge.
Removing excavated materials (soil) to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed by Engineer in Charge.
M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and directed by Engineer in Charge.
M&L for Block masonry with solid precast cement concrete blocks made out of cement concrete (1:3:6) type C1, using 20 mm graded stone aggregate, exceeding 10 Cm width and setting in cement sand mortar 1:6 complete all as specified and directed.
M&L for Block masonry with solid precast cement concrete blocks made out of cement concrete (1:3:6) type C1, using 20 mm graded stone aggregate, not exceeding 10 Cm width and setting in cement sand mortar 1:6 complete all as specified and directed.
M&L for 75mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed by Engineer in Charge.
M&L for RCC 1:1⅟2:3 (nominal mix) type B-1 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and as directed by Engineer in Charge.
M&L for Precast RCC 1:11/2:3 type B-1 (using 20mm graded stone aggregate) as in cover slab(for Manholes etc), landings, chajja, water troughs etc., set in CM (1:6) including necessary formwork etc., complete, all as specified and directed.
M&L for Mild steel TMT deformed bars, 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality, conforming to best quality, complete, all as specified and directed by Engineer in Charge.
M&L rolled mild steel conforming to Fe 290 (Gde E-165), in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) fixed with angle cleats or other connecting plates including distance pieces, cleats, plates, welding/rivets/bolts, Fe 410 -W (Gde E- 250) quality A etc complete all as specified and as directed.
S&F iron angle for water tank staging and like structures incl caps, bases, splices etc built up from two or more angles including stiffeners, gusse plates etc., of Fe-290 (Gde E 165), complete, all as specified and directed by Engineer-in-Charge.
S&F framed work such as grills, gratings etc with ends of bars shouldered or riveteted or foged into spikes, framed guard bars conforming to FE 290 Gde E-165, complete, all as specified and directed by Engineer-in-Charge.
M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 Sqm but not exceeding 1.0 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed.
M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 Sqm but not exceeding 1.0 sqm, in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:4, complete, all as specified and as directed.
M&L for Granite 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, counter basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete,all as specified and directed.
Labour only for chamfer, splays or arris in facework of granite not exc 15mm wide, complete, all as specified and directed.
S&F pre-painted Galvalume aluminium zinc coating, GI based, corrugated steel sheet 0.50mm thick as in roof covering of tensile strength 550 MPa, including fixing with self driving machine made screws, washers and fittings, of same manufacture of approved profile, shape and colour etc., complete, all as specified and directed.
S&F pre-painted Galvalume aluminium zinc coating, GI based, plain steel sheet 0.50mm thick as in ridges, hips, valley gutter, drip, straight flashing etc., of tensile strength 550 MPa, including fixing with self driving machine made screws, washers and fittings, of same manufacture of approved profile, shape and colour etc., complete, all as specified and directed.
S&F 2 mm thick fibre reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed.
M&L for 12 thick seamless calcium silicate ceiling made out of 1800x1200 size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillings head with under head cutter at 200 mm centre to centre incl finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seamless finish fibre tape to provide incl two coat of putty and two coat of OBD design incl GI frame for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.90 mm thick having two equal flanges 15 mm each and web of 45 mm suspended from soffit at approx 900 mm c/c with GI cleat and steel expansion fasternerswith and incl ceiling section (nexc 1.20 m lenght) 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.50 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm c/c complete all as specified and as directed.
S&F powder coated (minimum powder coating 50micron) anodised aluminium frame for doors, windows, ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
S&F powder coated (minimum powder coating 50micron) Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc., complete, all as specified and upto the entire satisfaction of Engineer in charge. Note: Cost of aluminium fittings such as hinges etc. replaced shall deemed to be included in the rate quoted.
S&F powder coated (minimum powder coating 50micron) anodised aluminium window and ventilator shutters, side hung/ sliding type, without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws etc. including aluminium fittings such as peg stays 150mm long(1 No), hinges type B-21 100mm long (2 no), suitable handle(1 no) complete all as specified and upto the entire satisfaction of Engineer in charge. Note: Cost of aluminium fittings such as hinges etc. replaced shall deemed to be included in the rate quoted.
S&F 4.80mm thick sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane, fixed with spring clips etc., complete, all as specified and directed.
S&F 4.80mm thick frosted glass ordinary quality & glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane, fixed with spring clips etc., complete, all as specified and directed.
S&F venetian blinds of width 50mm and thickness of material 5mm of wooden finish with all necessary arrangements for fixing and movement of blinds complete all as per manufacturer's instructions and as specified and directed by Engr-in-charge.
S&F Brass Handle, Fancy type, fabricated type, 100mm length, ISI marked, complete, all as specified and directed by Engr-in-charge.
S&F Brass Handle, Fancy type, fabricated type, 150mm length, ISI marked, complete, all as specified and directed by Engr-in-charge.
S&F butt hinges 100 mm size, extruded brass with mild steel hinge pin bright polsihed and fixed type B-11, ISI Marked, complete, all as specified and directed.
S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap ( when open) 30 mm complete all as specified and as directed.
M&L for Rendering 15 mm thick in cement sand mortar (1:6) on brick or concrete works finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge.
M&L for Rendering 15 mm thick in cement sand mortar (1:4) on brick or concrete works finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge. Note:- WPC shall be measured and paid separately.
Supply only integral water proofing compound, ISI marked, complete, all as specified and as directed.
M&L 2nd class hard wood plain fillets square rectangular or triangular in section clean sawn secured with nails or brads sectional area exc 13 sqcm n exc 25 sqcm, including dismantling of userviceable fillets, complete, all as specified and directed.
M&L 2nd class hard wood plain fillets square rectangular or triangular in section clean sawn secured with nails or brads sectional area exc 13 sqcm n exc 25 sqcm complete all as specified and directed.
S&F 5 mm thick PVC sheet fillet of 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing, complete, all as specified and directed by Engr-in-charge.
S&F solid PVC wall panelling consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifiecations and drawing, complete, all as specified and directed by Engr-in-charge.
M&L for 12 mm thick PVC board of grade 1 quality exterior grade fixed with screws to timber frame, complete, all as specified and as directed.
M&L for 18/19 mm thick WPC (Wood plastic composite) board of grade 1 quality exterior grade fixed with screws to timber frame, complete, all as specified and as directed.
S&F 0.90mm thick decorative laminate type1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacture's instructions complete all as directed.
S&F table top round shape Vitreous china wash hand basin, size 635x430x190 mm including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, complete, all as specified and as directed by Engineer-in-Charge. Make: (wash hand basin) Jaguar Cat Part No-ARS WHT 39601, (Waste Coupling) Jaguar ALD 727 or equivalent make of Cera/ Parryware/ Hindware.
S&F in repairs table top Oval shape Vitreous china wash hand basin, size 555 x 425 x195mm including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, complete, all as specified and as directed by Engineer-in-Charge. Make: (wash hand basin) Jaguar Cat Part No-FLS WHT 5701, (Waste Coupling) Jaguar ALD 727 or equivalent make of Cera/ Parryware/ Hindware.
S&F 450mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15mm bore pipe line complete all as specified and directed.
S&F stack clamps out of 75mm by 5mm flat iron and 16mm dia round iron stays, incl bolts and nuts and securing ends to stays to wall or roof complete all as specified and as directed.
S&F 3-Hole Basin Mixer Regular, Table Mounted, Quarter Turn, without Popup Waste System, 20mm Cartridge Size, complete, all as specified and as directed. Make: Jaguar Cat part No.FLR 5189N or equivalent model from Cera/ Parryware
S&F in repairs, Towel rack with lower hangers, stainless steel, 600mm long between flanges, fixed with stainless steel screws in position, complete, all as specified and as directed. Make: Jaquar Cat Part No-AKP-35781PS or equivalent make of Cera/ Parryware/ Hindware
S&F Towel ring square shape stainless steel, fixed on wall surface with rawl plug and stainless steel screws, complete, all as specified and directed. Make: Jaguar Cat Part No:-AKP-35721P or equivalent Cera/ Hindware/ Prayag
S&F brass barrel tower bolts and fixed of 100mm length, ISI marked complete all as specified and directed by Engr-in-charge.
S&F rotational moulded polyethylene 1000 ltrs capacity water storage tanks, three layered, (ISI marked) colour as directed by Engr-in-charge (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball including 20mm dia GI medium grade over flow pipe, approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end, complete, all as specified and directed.
S&F 110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls/ Floors including pvc clamps for securing pipe etc complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls/ Floor including pvc clamps for securing pipe etc complete all as specified and directed.
S&F 110mm bore PVC (SWR) bend with or without access door of any radius jointed with solvent cement and rubber ring joint fixed, complete all as specified and directed.
S&F 75mm bore PVC (SWR) bend with or without access door of any radius jointed with solvent cement and rubber ring joint fixed, complete all as specified and directed.
S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
M&L for cutting chases, of girth not exceeding 10cm for concealed water tubing or concealed conduit wiring etc, in stone/ brick masonry wall built in cement mortar and making good, disturbed surface in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc., complete, all as specified and as directed Engr-in-incharge.
M&L for preparation of old steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint, complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint, over a coat of red oxide, complete all as specified and directed.
M&L for preparation of newly or previously undecorated plastered surface of wall and applying oil bound distemper two coats of approved shade over one coat of compatible wall primer over and including 1mm thick wall care putty to achieve smooth surfaces complete all as specified and as directed by Engineer-in-Charge.
M&L for preperation of new or previously untreated surface, applying two or more coats of 100% premium acrylic emulsion paint having VOC (volatile organic compound) less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 Sqm on new or previously untreated surface over 1mm thick wall care putty, complete, all as specified and as directed by Engr-in-charge.
M&L for applying two or more coats (over 1mm thick plaster of paris wall care putty) of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surface on external surfaces including complete removal of exixting treatment over wall and preperation of surfaces even and smooth, complete, all as specified and directed by Engr-in-charge.
Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note 1: Switch, socket and fan regulators to be measured and paid for separately . PVC Conduit confirming to IS 9537 part I & III Note 2: All chases will be cut by chase cutter only. AMke of Cable - KEI/ Havells / Kalinga
Description all as per item No. 84 here in before but for socket outlet point 5 Amp on same board.
Description all as per item No. 84 here in before but for socket outlet point 5 Amp on Independent board.
Description all as per item No. 84 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.
Supply and fixing modular switch 1 way 6 A module 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make : Cona , Plaza, Anchor, Vinay
Supply and fixing modular switch 1 way 16 A module 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make : Cona , Plaza, Anchor .
Supply and fixing modular sockets 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. ake : Cona , Plaza, Anchor, Vinay
Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make : Cona , Plaza, Anchor, Vinay
Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. Make : Cona , Plaza, Anchor .
Supply and fixing LED lights fitting 1x 18W, 220V,AC decorative box type, warm white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete complete pre wired fixed to wall with 2 nos PVC block of suitable size complete all spcifided and directed.
S & F Mirror wall mounted LED batten fittings with all accessories 1X 12 Watt LED 6000K , extruded polycarbonate, integrated electronic driver and fixed to wall complete all as specified and as directed including taking down old unserviceable light fittings Make- Philips cat Part 31403 12-Watt LED picture Light (Gold)
Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one.
Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's including taking down old one.
S & F Wall bracket decorative LED fitting 2 light opal glass with chrome finishing warm white /white type with lamp 12 Watt complete with necessary connection complete Make- Jaquar Cat part KCH-CHR-MB160275532B
S & F Exhaust fan 230 volts , 300mm, heavy duty steel body including making all electric connection complete all as specified and as directed including cutting of hole on wall and making good disturbed surface of wall and outer wooden box for fan fix on wall including taking down old one Make Bajaj/Havell's/CG.
Supply and fixing LED 3 light clear glass, rose gold mesh with chrome finishing pendent IP65 protection, better optics for uniform distribtion warm white / white type complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete. MAke- Jaquar cat No- JNL-CHR-MD 160020053B
S & F Philips 11.5 Watts Smart Lightstrip Plus with suitable size LED driver warm white / white type and fixed in ceiling / wall with 2 Nos PVC block suitable size complete all as specified and as directed including taking down old unserviceable light fittings Make- Philips Cat part No- 915005240701
S & F Slim desingn LED recessed round/square type down lighter 06 watt warm white / white type flat panel PDC aluminium housing and PMMA diffuser including taking down old unserviceable one all as directed and specified Make- CG Cat Part No- LCDEP-06-WW
S & F Slim desingn LED recessed round/square type down lighter 12 watt warm white / white type flat panel PDC aluminium housing and PMMA diffuser including taking down old unserviceable one all as directed and specified. Make- CG Cat Part No- LCDEP-12-WW
Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.
Material and labour for sub main wiring with two single core 4.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 4.0 sqmm green colour as earth lead including PVC casing capping of suitable size complete all as specified and directed, including taking down unservicable one.(Note: two run of 4.0 sqmm cable , one run of earth wire of 4.0 sqmm and one run of PVC casing capping shall be measured as one length).Make- Cable- Finolex/RR cable/Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga.
S&F sheet metal enclosures with socket and MCB single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 240 Volt- 20Amp.
Supply fixing & testing of storage type water heater of capacity 25 Ltrs, Vertical type, wall mounted, electrically operated, single phase, 5-star rated, pressure 8 bar, warranty on tank 7 years, warrant of heating element 3 years, product warrant 2 years. Make-Usha and equivalent make Crompton or Havells.
Supply & laying galvanized steel tubing, medium grade laid in trenches/floor/wall and joined including necessary fittings such as bends, elbow, tees, sockets, etc for 15mm dia pipe.
S&F bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.
S&F angle stop valve cast copper alloy, chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixing of size 15mm.
Material and labour for sub main wiring with two single core 6.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 6.0 sqmm green colour as earth lead including PVC casing capping of suitable size complete all as specified and directed, including taking down unservicable one.(Note: two run of 6.0 sqmm cable , one run of earth wire of 6.0 sqmm and one run of PVC casing capping shall be measured as one length).Make- Cable- Finolex/RR cable/Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga.
Supply, installing, commissioning and testing of Hi-wall split units indoor/ outdoor complete with cordless remote control unit and with built in heating and cooling arrangement and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rating of capacity 2 TR Make - samsung / Hitachi/daikin/Voltas
S K Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .