Loading
Loading…
Loading…
Tender Value
₹1.3 Cr
EMD Value
₹2.2 L
Closing Date
26 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
SIGNAL
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less, where:- V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Client certificate from other than Govt Organization should be duly supported by Form 16A/26AS generated through TRACES of Income Tax Department of India.
(a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Similar nature of work -"Any Signalling work"
29 conditions · 7 needing a document upload
Statement of Deviation
Power of Attorney
Certificate to be submitted / uploaded by tenderer along with the tender documents (Annexure V), Part I of GCC.
Annexure-V(A), Part I of GCC (This certificate is to be given by attorney/authorized signatory/each member of Partnership firm/Joint Venture (JV)/Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.)
(Bid Security) Bank Guarantee Bond from any scheduled commercial bank of India (Annexure VI(A)
EMD Submitted
List of personnel, organization available on hand and proposed to be engaged for the subject work.
List of works completed in the last three financial years giving description of work, organization for whom executed, approximate value of contract at the time of award, date of award and date of scheduled completion of work. Date of actual start, actual completion and final value of contract should also be given
List of works on hand indicating description of work, contract value, approximate value of balance work yet to be done and date of award.
Copy of PAN card
Documents for Turnover for financial eligibility criteria
Documents for technical eligibility criteria - Performance certificates for single similar nature of work
NEFT Details
GST Registration Certificate Copy
Bid Security Declaration in lieu of EMD Submitted
Organization details
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less, where:- V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Client certificate from other than Govt Organization should be duly supported by Form 16A/26AS generated through TRACES of Income Tax Department of India.
Power of Attorney
Annexure-V(A), Part I of GCC (This certificate is to be given by attorney/authorized signatory/each member of Partnership firm/Joint Venture (JV)/Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.)
(Bid Security) Bank Guarantee Bond from any scheduled commercial bank of India (Annexure VI(A)
NEFT Details
Copy of PAN card
Organization details
GST REGISTRATION/ A CERTIFCATE FOR NON-APPLICABILITY OF GST REGISTRATION
Bid Security Declaration in lieu of EMD Submitted
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Signaling and Telecommunication portion of work in connection with Five Engineering works in Arakkonam (AJJ) - Renigunta (RU) section in Chennai Division. (AJJ-RU-01/2026)
M-SG-2026-497-AJJ-RU_1
M-SG-2026-497-AJJ-RU_1
Open
Works - General
12 Months
Chennai, Tamil Nadu
₹0
₹2.2 L
26 Mar 2026
3 Mar 2026
12 Mar 2026
34 items across 1 schedule · ₹20,84,532.01 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | of cable trench in all kinds of soil rocky areas including clearing of trees, rocks, bushes etc. to a depth of and to a width of 0.3 Mtrs. Laying of included in this schedule. | Metre 2300.00 | — | 34.65 | 79,695 |
| 2 | of trench to a depth of 1 Mtr. for of cables, laying of DWC/ RCC collar/coupling, refilling of trench by and consolidating it as per the of Railway representative at site. excavation of trench it has to be ensured excavated soil does not mix with the available. The depth of 1m trench shall the bottom of sleepers for track Laying of cables is not included in this of DWC/RCC pipes with collars is not included in this | Metre 216.00 | — | 208.35 | 45,003.6 |
| 3 | GI pipes (50/100mm dia) for cable offset at both ends and with over RCC Bridges/ Drainage/ Culverts masonry supports of size 300mm x 300 mm at an interval of 2m. The pipes shall be closed with brick work so that no cable is exposed, The be carried out as per the instructions representative at site. (Supply of GI couplings and laying of cables is not this schedule.)[Stone jelly of size bricks, sand, cement and all other materials required for the work supplied by the Contractor]. | Metre 132.00 | — | 181.95 | 24,017.4 |
| 4 | GI pipes (50/100mm dia) for cable hard rocky area with off sets at both supported by concrete blocks of size 300 mm x 300 mm at an interval of ends of the pipes shall be closed with work so that no cable is exposed, shall be carried out as per the of Railway representative at site. GI pipes with couplings and laying of not included in this schedule.[Stone 20/25mm, bricks, sand, cement and miscellaneous materials required for shall be supplied by the Contractor]. | Metre 302.00 | — | 168.08 | 50,760.16 |
| 5 | signaling/power/telecommunication per cable plan in cable trenches, ducts, RCC Pipes, DWC pipes, GI Pipes of cables is not included in this | Metre 13000.00 | — | 9.83 | 1,27,790 |
| 6 | one row of country bricks of size 220mm x 100mm x 60mm wise horizontally above the cables in trench.[Country bricks of size 100mm x 60 mm (approximately) supplied by the Contractor]. | Metre 300.00 | — | 48.76 | 14,628 |
| 7 | cable trench 1m depth by 0.3m width with earth after laying of cables, consolidating the trench by ramming and | Metre 2300.00 | — | 8.33 | 19,159 |
| 8 | RCC cable markers as per drawing The lettering on the cable be "SIG" / "TELE" / "OFC" as per the of Railway representative at site. | Numbers 40.00 | — | 166.29 | 6,651.6 |
| 9 | pit to a depth of 800mm of size casting of concrete foundation 300mmX300mmX300mm and Placing of markers on top of the foundation and pit and consolidating it by ramming. markers shall be provided at an 20 Mtrs. within station limits and 50 station limits throughout the cable diversions and also at every | Numbers 40.00 | — | 121.43 | 4,857.2 |
| 10 | GI pipes - 100mm dia-4.5mm thick as Vol.II of the Tender document | Metre 434.00 | — | 838.8 | 3,64,039.2 |
| 11 | of pit, casting concrete foundation of apparatus case full size as per No.SG/CN/02/6 and fixing of 2 Nos. of 'E' one for the front door and another for door, fixing of one hard wood shelf thick and painting the apparatus and outside with one coat of red- two coats of aluminium paints.(Supply case is not included in this schedule).[Foundation bolts & nuts, 'E' type cement, river sand, stone jelly of size hardwood plank of 37mm thick, varnish, fixing bolts & nuts and all other materials required for the work supplied by the Contractor.] | Numbers 10.00 | — | 9,875.3 | 98,753 |
| 12 | of pit, casting concrete foundation of apparatus case half size as per No.SG/CN/02/7, fixing one 'E' type lock for door and latching arrangement for the and fixing of one hardwood shelf thick and painting the apparatus and outside with one coat of red- two coats of aluminium paints.(Supply case is not included in this schedule).[Foundation bolts and nuts, cement, locks, river sand, stone jelly of size 37mm hard wood planks, latching paints, varnish, fixing bolts & all other miscellaneous materials the work shall be supplied by the | Numbers 26.00 | — | 6,966.6 | 1,81,131.6 |
| 13 | of pit in and around the existing boxes very carefully without damaging cables and shifting and turning the boxes to clear of the infringement as by the Railway representative at site. includes ensuring the safety of the system, releasing the cable coils to for shifting/turning the location Necessary masonry work and earth work the location boxes to the required be done as instructed by the Railway at site. If the existing earth to the location boxes are disturbed, wires shall be properly re-connected. required for the work shall be by the Contractor]. a. Shifting of case (full) | Numbers 30.00 | — | 2,895 | 86,850 |
| 14 | of pit in and around the existing boxes very carefully without damaging cables and shifting and turning the boxes to clear of the infringement as by the Railway representative at site. includes ensuring the safety of the system, releasing the cable coils to for shifting/turning the location Necessary masonry work and earth work the location boxes to the required be done as instructed by the Railway at site. If the existing earth to the location boxes are disturbed, wires shall be properly re-connected. required for the work shall be by the Contractor]. b. Shifting of case (half) | Numbers 30.00 | — | 1,916.25 | 57,487.5 |
| 15 | of new main/tail cables on the terminals/ fuse blocks in apparatus battery boxes/ CT boxes/ cable racks as per approved circuit The terminal particulars are to be /corrected on the doors of apparatus boxes/ cable termination boxes index board as instructed by Railway at site. This work includes closing created for entry of new cables in cases with masonry brick work the bottom of the apparatus cases/ termination racks with cable compound. wire PVC 3/0.75mm and 16/0.2mm sealing compound, bricks, cement, river all other required miscellaneous shall be supplied by the contractor]. | Numbers 280.00 | — | 39.78 | 11,138.4 |
| 16 | of main, tail, Signaling and power internal wiring on terminal/ fuse new apparatus cases, cable boxes and in gate Lodges excluding termination rack at relay room. The work fixing of all new cables by teakwood teakwood base plank, fixing of synthetic industrial fibre base fine fibre board 6mm thick for terminal each apparatus case, varnishing all items, fixing of terminals/ fuse blocks terminal board, drilling of necessary termination of cables, wiring, of cables using aluminium tags punched neatly, as per approved diagram and cable plan, painting of on sleeves and also on the inner side doors of apparatus cases. After are over, the side openings of case foundation shall be closed with cement plastered, the inter-space river sand up to base level and the surface shall be sealed with sealing (Supply of PBT terminals and Fuse not covered in this schedule).[Cement, cable clamp 50mm x 50mm, base 100mm x 25mm, Phynolic synthetic fibre base fine weave cotton fibre thick to IS specification 2036 - 1995 PVC/Nylon sleeves, varnish, paints, and washers, Non-deteriorating type various capacities, Aluminium cable compound, country bricks 220mm x 60mm, copper bus bars, brass sand, wire PVC3/0.75mm copper miscellaneous materials shall be the Contractor]. a. Termination on PBT terminals (new location)(Phynolic | Numbers 2760.00 | — | 93.16 | 2,57,121.6 |
| 17 | of main, tail, Signaling and power internal wiring on terminal/ fuse new apparatus cases, cable boxes and in gate Lodges excluding termination rack at relay room. The work fixing of all new cables by teakwood teakwood base plank, fixing of synthetic industrial fibre base fine fibre board 6mm thick for terminal each apparatus case, varnishing all items, fixing of terminals/ fuse blocks terminal board, drilling of necessary termination of cables, wiring, of cables using aluminium tags punched neatly, as per approved diagram and cable plan, painting of on sleeves and also on the inner side doors of apparatus cases. After are over, the side openings of case foundation shall be closed with cement plastered, the inter-space river sand up to base level and the surface shall be sealed with sealing (Supply of PBT terminals and Fuse not covered in this schedule).[Cement, cable clamp 50mm x 50mm, base 100mm x 25mm, Phynolic synthetic fibre base fine weave cotton fibre thick to IS specification 2036 - 1995 PVC/Nylon sleeves, varnish, paints, and washers, Non-deteriorating type various capacities, Aluminium cable compound, country bricks 220mm x 60mm, copper bus bars, brass sand, wire PVC3/0.75mm copper miscellaneous materials shall be the Contractor]. a. Termination on PBT terminals (new location)(Phynolic Termination on PBT fuse block (new (Phynolic sheet) | Numbers 230.00 | — | 113.56 | 26,118.8 |
| 18 | of main, tail, Signaling and power internal wiring by fixing additional fuse blocks on the existing terminal apparatus cases, cable termination The work includes fixing of all new teakwood clamp on teakwood base varnishing all teakwood items, fixing of fuse blocks, on the existing terminal drilling of necessary holes, termination wiring, identification of cables using tags with letters punched neatly, as circuit diagram and cable plan, particulars on sleeves and also on side of the doors of apparatus cases. terminations are over, the side openings of case foundation shall be closed with cement plastered, the inter-space river sand up to base level and the surface shall be sealed with sealing (Supply of PBT terminals and Fuse not covered in this schedule).[Cement, cable clamp 50mm x 50mm, base 100mm x 25mm, PVC/Nylon sleeves, paints, bolts, nuts and washers, Non- type of fuses of various capacities, cable tags, sealing compound, bricks 220mm x 100mm x 60mm, bars, brass screw, river sand, wire copper and other miscellaneous shall be supplied by the Contractor]. a. of cables on 25/60mm PBT (existing location) | Numbers 840.00 | — | 81.68 | 68,611.2 |
| 19 | of main, tail, Signaling and power internal wiring by fixing additional fuse blocks on the existing terminal apparatus cases, cable termination The work includes fixing of all new teakwood clamp on teakwood base varnishing all teakwood items, fixing of fuse blocks, on the existing terminal drilling of necessary holes, termination wiring, identification of cables using tags with letters punched neatly, as circuit diagram and cable plan, particulars on sleeves and also on side of the doors of apparatus cases. terminations are over, the side openings of case foundation shall be closed with cement plastered, the inter-space river sand up to base level and the surface shall be sealed with sealing (Supply of PBT terminals and Fuse not covered in this schedule).[Cement, cable clamp 50mm x 50mm, base 100mm x 25mm, PVC/Nylon sleeves, paints, bolts, nuts and washers, Non- type of fuses of various capacities, cable tags, sealing compound, bricks 220mm x 100mm x 60mm, bars, brass screw, river sand, wire copper and other miscellaneous shall be supplied by the Contractor]. b. of cables on PBT fuse block location) | Numbers 290.00 | — | 102.08 | 29,603.2 |
| 20 | of pit, casting concrete foundation as Drg.No.SG/CN/02/9 using metallic templates, of colour light signals up to 4 bolts, cement, river sand, of size 20/25mm dia and all other materials required for the work supplied by the Contractor]. | Numbers 6.00 | — | 5,008.2 | 30,049.2 |
| 21 | surface base, signal pole, mounting light signal up to 4 aspects complete pole/ Off-set bracket, (for LED/ filament lenses, triple pole lamp holder, switching units, CLS transformer, regulators (whichever is applicable), ladder with platform complete and of ladder shoe, fixing of number board, lens guard, termination of wiring of signal unit with PVC wire copper, provision of EWS locks, and one coat of red oxide and two coats enamel paints. When the aspect is Offset bracket using 'U' bolts and nuts, bolt shall be provided by drilling a signal pole to prevent the offset from sliding down.(Supply of surface bracket, CLS pole, CLS aspects ladder with shoes and platform, LED current regulators, lamp holders, filament switching unit and CLS is not covered in this schedule).['U' nuts, through bolts and nuts, cement, 20/25mm dia, river sand, Signal wire PVC 3/0.75mm copper, lens- fixing bolts and nuts, lead wool, paints sleeves, enameled number plates. marker boards, EWS locks, and all miscellaneous materials for the work shall by the Contractor]. | Numbers 6.00 | — | 5,501.2 | 33,007.2 |
| 22 | of pit and casting concrete as per Drg, No.SG/CN/02/10 using templates, for erection of ground type shunt signal.[Foundation bolts and river sand, stone jelly of size and all other miscellaneous materials work shall be supplied by the | Numbers 3.00 | — | 2,518.55 | 7,555.65 |
| 23 | Ground type shunt signal complete surface base, signal pole, LED aspects/ bulbs with holders (whichever is fixing of lens guards, number plate, of tail cables, wiring of signal unit wire 3/0.75mm copper, provision of and painting of one coat of red oxide coats of Aluminium/ enamel paint. Ground type shunt signal complete surface base, signal pole, LED aspects, and lenses is not covered in this PVC 3/0.75mm copper, lens EWS locks, Enameled number plates, nuts, lead wool, paints and all other materials shall be supplied by the | Numbers 3.00 | — | 2,097 | 6,291 |
| 24 | Offset brackets using 'U' bolts and nuts, Calling On Signals/ 'A' marker lights, of tail cables and wiring using wire copper, provision of EWS lock, plates/ marker boards and painting. The includes drilling suitable holes on the and provision of a through bolt with nut the Off-set bracket from slipping of Calling On Signal/ 'A' marker aspects/ holders & bulbs and Off set not covered in this schedule).['U' nuts, through bolts with nut, wire PVC copper, EWS lock, Enameled number mesh, PVC/Nylon sleeves, paints and miscellaneous materials shall be the contractor]. | Numbers 6.00 | — | 1,427.25 | 8,563.5 |
| 25 | of earth electrodes as per drawing and earthing of metallic sheath of all cables in all apparatus cases, equipment room, SM's room for control, and earthing of all in apparatus cases, power room, cable termination rack, control panel, lever frames with MS flat 35mm X cable (MS flat for closure by areas and cable combination for farther areas) instructions of Railway representative work includes painting of earth value on the earth pit. Supply of 19C not covered in the scope of this flat for earthing 35mm X 6mm, earth electrodes, common salt, country bricks, river sand, soldering and all other miscellaneous materials the work shall be supplied by the | Numbers 41.00 | — | 1,799 | 73,759 |
| 26 | track lead junction box - FRP type with and stumps with necessary as per specification/ drawing/ enclosed in this document. | Numbers 22.00 | — | 1,030 | 22,660 |
| 27 | PBT terminals 25mm/ 60mm centre Fuse blocks with necessary inspection specification/ drawing/ description in this document. a. Supply of PBT 25mm centre | Numbers 3080.00 | — | 44 | 1,35,520 |
| 28 | PBT terminals 25mm/ 60mm centre Fuse blocks with necessary inspection specification/ drawing/ description in this document. b. Supply of PBT 60mm centre | Numbers 520.00 | — | 60 | 31,200 |
| 29 | PBT terminals 25mm/ 60mm centre Fuse blocks with necessary inspection specification/ drawing/ description this document. c. Supply of PBT fuse ND fuse) | Numbers 520.00 | — | 82 | 42,640 |
| 30 | lamp proving relays for LED aspects boards, connectors and retaining clips inspection as per specification/ description enclosed in this document. | Numbers 10.00 | — | 3,591 | 35,910 |
| 31 | QBCA1 - heavy duty contact relays inspection as per specification/ description enclosed in this document. | Numbers 10.00 | — | 4,140 | 41,400 |
| 32 | provision of E type lock with key for same in LC/HP/FP Locks/SM slides and as per standard practice and of Railway representative at site. E type Locks, Keys, Paints, all types of & Nuts and all other miscellaneous shall be supplied by the Contractor). | Numbers 10.00 | — | 1,266 | 12,660 |
| 33 | of Signalling materials by road as instructions of Railway representative at work also includes loading and of the materials. a. Transportation Kms. | MT-Km 3000.00 | — | 12.3 | 36,900 |
| 34 | mechanical excavators like JCB or machinaries for regrading and levelling the dismantling any infringing structures, removing debris etc., with all leads etc., complete and as per the of Railway representative at site. | Hour 20.00 | — | 650 | 13,000 |
| Schedule total | ₹20,84,532.01 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC April 2022
ATTACHMENT
GCCCorrectionslip1to10-Copy.pdf
ATTACHMENT
SOR2011BOOKLET.pdf
ATTACHMENT
VolumeIIBOOKLET.pdf
ATTACHMENT
JPOforundertakingtheDiggingwork1.pdf JPO for undertaking the digging
ATTACHMENT
Tender Document
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27.04.22.pdf
ATTACHMENT
JPOforundertakingtheDiggingwork1.pdf
ATTACHMENT
TenderDocumentforEnggWorksinAJJRU-1section.docx.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .