Certain repair to joinery flooring seepage and roof treatment in md accn of JCOs/ORs in Zone III area at Jaipur Mil stn under GE(S) Jaipur

Amount

Taking down chowkat or frames with shutters (with one wood out taking off shutters from the frame) n. exe 1.50 SQM each as directed.

- Ditto – as per item No 1 above but exe 1.50 SQM but n .exe 4.00 SQM each.

Taking down shutters of any description exe 1.00 SQM but n.exc 2.00 Sqm each as directed.

- Ditto – all as per item No 3 above but exe 2.0 SQM each.

M&L for pressed steel frames for door with one Or more rebated including necessary fixing lugs, hinges, locks strike plates, etc ,complete all as specified and fixed of size 125x 60mm

M&L for pressed steel frames for door with one Or more rebated including necessary fixing lugs, hinges, locks strike plates, etc, complete all as specified and fixed of size 105x 60mm

M& L for PCC 1:3:6 type C1 20 mm graded stone aggregate as in filling of steel chowkhats complete all as specified .

S&F 2nd class HW rail & style (Sal/hollock) factory made plain framed panelled shutters 35 mm thick (any number of pannel) with panels of timber flats on both sides (feather edged) or 12 mm thick veneered particle board medium density , wood particle board with commercial face veneers complete all as specified and directed.

S&F 2nd class HW (sal/hollock) 35 MM thick glazed and skeleton shutters open rebated and prepared to receive glass ,gauze etc (with out sash bars) edges for framing plain chanferred or rounded fitted with cut and mitred beads for securing glass etc, size Pt-I clause 8.20 (a) for doors completed as specified and directed.

S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube and edges will be painted to match with painted sheet complete all as specified and directed.

S&F factory made solid pannel PVC door shutters 30 mm thick consisting of frame made out of MS tube for styles, top and bottom rails , mild stell frame shall be covered with heat moulded plaing colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , paneling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed togther with solvent cement S&F in the frame at site, complete all as specified and directe

S&F powder coated 6 mm thickness of powder coating 50 microns aluminimum anodised frame fixed type incl necessay joining , cleats, glazing clips , rubber packing anodised aluminimum snap beading , screws etc complete all as specified and directed.

S&F powder coated 6 mm thickness of powder coating 50 microns aluminimum anodised door/window shutter open/ sliding type with aluminimum section weighing 0.55 kg/mtr incl necessay joining , cleats, glazing clips , rubber packing anodised aluminimum snap beading , screws handle tower bolt etc complete all as specified and directed.

S&F aluminimum (Die cast ) body door closer hydraulically regulated, designation No 2 universal type , suitable for door shutter of 701 to 850mm in width and of weight between36 to 60 Kg and fixed complete all as specified and directed.

S&F factory made Mild Steel windows with side hung shelters incl projecting type hinge with steel handle and steel peg stay, complete with glazing bars dovetailed or welded including taking down of existing steel windows all as specified.

S&F Mild Steel windows with side hung shelters incl projecting type hinge with steel handle and steel peg stay complete without glazing bars dovetailed or welded , including taking down of existing steel window all as specified.

S&F Mild Steel ventilators with top hung shelters incl hinges with steel handle and steel peg stay, complete all as specified. Including taking down existing steel ventilators

S&F MS framed work such as grills , gratings guard bars etc with ends of bars shouldered or rivetted, or forged into spikes, conforming to Fe-410-0 complete all as specified and directed.

S&F 100 mm size MS butt hinges, medium weihgt all as specified.

S&F 300 mm long MS sliding door bolt of stove enameled black (clip type)with bright bolt not less than 12 mm dia with and including a iminimum of 6 bolts and nuts complete fitted all as specified and directed .

S&F mild steel barrel tower bolt stove enamelled black with bright bolt 150 mm long all as specified.

S&F mild steel pressed handle ovel type stove enamelled black with bright bolt 125 mm long all as specified.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire with average width of aperture 1.18 mm fixed with tinned tacks or galvanised wire stapels fixed etc complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxcide primer Complete all as specified and directe

S&F mild steel 300 mm long , ordinary rat tail rod pattern springs including roller and roller plate, complete fixed to wooden /angle iron chowkat all as specified.

S&F aluminimum, anodised, barrel tower bolt 150 mm long all as specified.

S&F 300 mm long aluminimum, anodised sliding door bolt with hasp, and staple (bolt type) and fixing a clips of sheet , cast or extruded sections complete all as specified and directed .

S&F aluminimum , anodised bow handle, 125 mm in length all as specified.

S&F 4.00 mm thick sheet glass of ordinary quality and glazing with oil putty in square, fixed with beads in squares nexe 0.50 SQM in each pane complete all as specified and directed.

Taking down plastering cement plaster on brick or concrete surfaces including raking out joints hacking for key, scrubbing down with water any description all as specified.

Demolition of brick work built in cement mortar including all quoins arches , pillers etc all as specified and directed

M&L for brick work with Sub class ' B ' bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed..

M&L for rendering 15 mm thick in cement mortar 1:6 on wall of brick work or concrete surfaces finished fair and even complete all as specified and directed.

M&L for Preparation of new plaster surface and applying two coat of cement base paint on wall complete all as sepecified.

Taking down old and S&F pressed steel cup board shutters with frame , the frame shall be made of 1.25 mm thick and shutter made of 1.00 mm thick PBI sheet with 6 Nos 100 mm long steel hinges , Godrej pattern locking arrangement including 12mm dia vertical rod all as per TD drg No CEJZ /TD 2004/29 (available in office). The surfaces shall be spary painted with two coat of synthetic enamel paint over a coat of zinc chromate primer over cleared surface complete all as specified and directed and shown on drg (Total width including frame shall be measured flat and paid.

M&L for preparing the new plastered surfaces and applying two coats of oil bound distemper over a coat of prirmer on wall complete all as specified and directed.

Dismantling , floor hearth or wall tiling including CM (but not backing ) removing seviceable tiles to store & rubbish off the premises, complete all as sepecified.

S&F 300 x 200 x 6 to 7 mm th coloured ceramic tiles (Ist quality) as on vertical surface set & jointed in neat cement slurry and pointed in white /coloured cement to match the tiles over 10 mm thick plaster in CM (1:4) all as specified and directed in vertical surfaces.

M/L coloured Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of Each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm , in floors etc and set jointed in neat cement slurry and pointed in white or coloured cement match over 15 mm thick screed bed in CM(1:4) completed all as specified.

M/L coloured Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of Each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm , in floors etc set jointed in neat cement slurry and pointed in white or coloured cement match over 15 mm thick screed bed in CM(1:4) completed all as specified

M&L machine cut Kota stone slab flooring 20-25 mm thick over cement screed bed 15 mm thick in CM (1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of flooring including rubbing and mirror polishing complete all as specified

M&L double action door spring hydraulically regulated made up of minimum 1.25 mm thick aluminimum alloy , sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of ,mild steel heavy duty and fixed complete all as specifiedand directed

S&F 4.00 mm thick frosted glass of ordinary quality and glazing in square n. Exc 0.5 sqm in each pane as required as directed by Engr -in-Charge.

S&F 5.5 mm thick glass of ordinary quality and glazing in square including solar control film 25mm micron reflective type sticked to glass panes as per instructions of manufacturers .

Hacking out old broken glass pane (any thickness, any size, quality , description)from metal /wood frame including punching or drilling out old glass panes, pins, springs clips & fixing 3.00 mm thick sheet glass of ordinary quality and glazing in square as required as directed by Engr -in-Charge.

Hacking out old broken glass pane (any thickness, size, quality , dexcription)from metal /wood frame including punching or drilling out old glass panes, pins, springs clips & supply and fixing 3.00 mm thick frosted glass of ordinary quality and glazing in square as required as directed by Engr -in-Charge.

Demolition of cement Concrete of any description in any poisition not otherwise specifically provided for.

M&L 75 mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in sub base to floor as specified.

M&L for 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) finished fair and even all as specified.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm tickness , M-35 grade, set, jointed over 25 mm thick sand cushoning all as directed by Engineer-in-Charge.

M&L providing pre cast cement concrete block or slab withPCC 1:2:4 type B1 using 20mm graded stone aggregate with plain or inter locking joints as directed set in CM 1:6. kerbing/edge block to hard standing/drain Covers including necessary earth work.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I ,500 Ltrs Capacity, including Dismantling of old water tanks

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I, 1000 Ltrs Capacity, including Dismantling water tanks

S&F in repair Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule

S&F in repair Ball brass valves 25mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule

S&F in repairs fancy type Bib taps 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule.

S&F in repairs Stop valves 15 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions

S&F GI Tubes, `medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 15mm bore including taking up or down steel tubing & connections

S&F GI Tubes, `medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 20mm bore including taking up or down steel tubing & connections

S&F GI Tubes, `medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 25mm bore including taking up or down steel tubing & connections

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm

S&F in repairs Vitreous China squatting pan 'orissa ' pattern `, size 580mmX 440 mm white ,with integral foot rests,(exclusing flushing cistern & flush pipe) including connection to trap and to flush pipe etc including setting in and including concrete

S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (min.), with grating & union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe)

S&F in repairs Vitreous China wash basin, white, flat back, size 630x450mm excluding taps, waste chain & plug & porcelain stopper but including brackets

S&F in repairCP Pillar taps 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe

S&F in repair Stop valves 15 mm bore fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions

S&F in repair Swivel shower of PTMT any colour for fixing with 15mm pipe (min. weight 40gms)

S & F in repair Grating doom 125 mm dia (minimum weight 25 grams)with waste hole of PTMT

S&F in repair mild steel spring hinges 300 mm long , ordinary rat tail rod pattern including roller and roller plate complete fixed to wooden /angle iron chowkat all as specified.

S&F in repair PVC valve less syphonic action type low level flushing cistern coloured with inlet ball valve float and handle incl bracket 10 Lit capacity Make:- slimline / Paryware

S&F in repair Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm

S&F in repair PVC Waste Pipe 32 mm bore for WHB

S&F in repairs angle stop cock 15 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions fancy type chromium plated

Welding in repairs. Exc 2.5cm but n.exc 5 cm in length, thickness of metal to be welded exc 6 mm but n.exc 9 mm.

Running welding in repairs, thickness of metal to be welded n.exc 6 mm thick

Demolition of PCC in roof covering, kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any type all as directed by Engineer-in-charge.

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 40mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop with WPC @ 3% weight of cement.

Painting surface with one coat of polymeric primer @ 0.30 Kg per sqm, conforming to IS : 3384. M&L for layer of APP based polymeric membrane, 3 mm thick (min), weighing not less than 3.5 Kg/Sqm reinforced with polyster non woven fabric ( weighing not less than 150 gms/ Sqm). Application of polymeric membrane shall be by torch application all as per manufacturer instructions

M&L applying one coat of alluminium paint on surface of any description wood,steel,iron, concrete,brick , stone etc exc 10 cm in width or girth, application of paint shall be as per manufacturers instructions.

Supplying only Integral waterproofing compound

M& L cement concrete type B-0 (1:2:4) (using 12.5 mm graded aggregate ) as in roof kerbs rounded or chamfered on edges

SANWARIA ENTERPRISES

Smita Constructions

M/S JALANDRA CONSTRUCTIONS

J.J.ENGINEERING