Janpad champawat ke antragart canal calony banbasa main karamchariyon ke awasiye bhawan upkhandiye karalaye bhawan tatha parisar main jalapurti line ki maramamat /punursthapna ka karya

Amount

A-JE residence , IV class & clerical staff residence and subdivision office building Dismantling old damaged slab/arch including cost of labour T&P etc. for proper completion of work.

Dismantling old damaged Plaster including disposal of refuse with in proper distance i/c. cost of labour, T&P etc. for proper completion of work.

Dismantling old damaged door/window including cost of labour T&P etc. for proper completion of work.

Dismantling old damaged C.C. floor including cost of labour T&P etc. for proper completion of work.

Dismantling old damaged brick work including cost of labour T&P etc. for proper completion of work.

Earth work in foundation in dry ordinary soil loam clay and sand i/c all lead and lift including bed filling watering ramming of excavated earth etc. for proper completion of work.

Providing & Laying C.C. 1:4:8 in foundation and floor base with cement, coarse sand, stone ballast size 20-40 mm i/c all cost of material labour, T&P etc for proper completion of work.

Brick work in 1:6 cement coarse sand mortar with Brick M 150 grade cost of all material, labour T&P etc required for proper completion of work.

Providing & fixing M.S. door/window frame including cost of all material, labour, and T&P etc. for proper completion of work.

Providing & fixing M.S. hold fast for door/window including cost of all material, labour, and T&P etc. for proper completion of work

Providing & fixing M.S. Grills in windows including cost of all material, labour, and T&P etc. for proper completion of work.

Centering & Shuttering for R.C.C work (slab/beam) with cost of centering & Shuttering up to 3.00m. height all i/c cost of all materials, labour, T&P etc. for proper completion of work.

R.C.C works 1:1.5:3 in Beam/slab with cement coarse sand, shingle/grit size 12-20 mm i/c cost of material labour, T&P etc. but excluding cost of centering, shuttering and reinforcement required for proper completion of work.

Tor steel reinforcement i/c. its cutting, bending, placing in position, binding with cost of all materials, labour, T&P etc. required for proper completion of work.

Supplying and fixing 32 mm thick flush doors commercial quality conform to I.S. 2202 part I (1983) including fixing of wooden cleats and stoppers and including fixing and adjustable of hinges bolts locks handles springs fitting with necessary screw for proper completion of work.

Providing and fixing glazed shutter in windows shutter second class teak wood including I.S.I marked anodized aluminum butt hinges with necessary screws including all material, labour, and T&P etc. for proper completion of work.

Providing and fixing fly proof galvanized M.S. wire gauge to door/window shutters using galvanized M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm with 2nd class teak wood beading 62x19 mm including all material, labour, and T&P etc. for proper completion of work.

12.5 mm thick Cement Plaster in 1:4 cement, coarse sand mortar including cost of all material, labour and T&P for proper completion of work.

Providing and laying glass strips 3.15 mm thick and 2.2 cm Depth including supply of all material labour and T&P etc required for proper completion of work.

C.C flooring 25mm. thick in 1:2:4 Cement :coarse sand :shingle/grit 12-20mm size including cost of all materials, labour and T&P etc for proper completion of work.

Providing and laying vitrified floor tiles of size 60cm x 60cm in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS 15622 of approved make in all colours and shade, colour and facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc for proper completion of work.

Providing and fixing 6 mm (1/4'') China white glazed in flooring or skirting dado laid with 1:3 cement and approved coarse sand mortar finished white cement slurry jointing and polishing complete including supply of all materials, labour and T&P etc. required for proper completion of work.

Colour washing with lime on undercoated wall surface two coat to give a smooth bodied adequate finish including thoroughly brooming the surface to remove all dirt, dist, mortar drops and other foreign matter including cost of all materials, labour and T&P etc. required for proper completion of work.

Finishing of walls 2 coat over priming coats outside walls with water proofing cement paints of approved make such as super Snowcem, Durrocem, including curing and cost of all materials, T&P for proper completion of work.

Enamel Painting 2 coats over priming coat on wooden and steel surface including cost of material, of approved brand as burger, shalimar, asian etc. labour and T&P etc. required for proper completion of work.

Earthwork in embankment for raising lawn by power transported earth with a lead beyond 200m. And up to 1.00 km. including excavation, loading, unloading, manual compaction, dressing and all lifts complete excluding royalty will be applicable from time to time on Govt. Orders.

B-(C-WORK) External water supply Earth work in digging trenches for laying PVC/G.I Pipe line 160/200 mm upto 1.0 m depth and backfilling of trenches i/c. cost of labour, T&P etc for proper completion of work.

Boring with 100 mm diameter casing pipe for hand pump/tube well, in all soils including removing the casing pipe after the hand pump/tube well is lowered and tested:

Providing & Laying 3'' dia G.I. pipe line i/c cost of all material, labour, T&P etc. for proper completion of work.

Providing & Laying 2'' dia G.I. pipe line i/c cost of all material, labour, T&P etc. for proper completion of work.

Providing & Laying 1.25'' dia G.I. pipe line i/c cost of all material, labour, T&P etc. for proper completion of work.

Providing and fixing double equal plain junction of Required degree G.I. i/c cost of all material, labour, T&P etc. for proper completion of work.

Providing and fixing extension nipple (size 15 mmx50mm) of G.I. i/c cost of all material, labour, T&P etc. for proper completion of work.

Providing & fixing 1.25'' G.I. Non Return valve i/c cost of all material, labour, T&P etc. for proper completion of work.

Providing & fixing 2'' G.I. Non Return valve i/c cost of all material, labour, T&P etc. for proper completion of work.

Providing & fixing 1.25'' G.I. Union i/c cost of all material, labour, T&P etc. for proper completion of work.

Providing & fixing 2'' G.I. Union i/c cost of all material, labour, T&P etc. for proper completion of work.

C- ELECTRICAL FITTINGS Wiring points for light with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects as directed by Engineer-in-Charge.

(i) For two way light Points. (Sl. No. 139 C)

(ii) For fan and light duty exhaust fan. (Sl. No. 140 C)

(iii) For 5 amp plug point with piano type switch and socket etc. (Sl. No. 141 C)

Supply and wiring of sub main 2 number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects as directed by Engineer-in-Charge. (Sl. No. 221 C)

Supply fixing and concealing of 20mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid, plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work (Sl. No. 148 A)

Erection and testing of ceiling fan and regulator for room height upto 3 mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects as directed by Engineer-in-Charge. (Sl. No. 1116)

Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects as directed by Engineer-in-Charge. (Sl. No. 1120)

S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted with red oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work. (Sl. No. 1149)

S/F of LED tube light with batten suitable for up to 1X22 watt LED tube light fitting including tube on surface complete in all respect as directed by Engineer-in-Charge. CAT-AAA (Sl. No. 1413)

Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work. (Sl. No. 1141 B)

Supply and fixing of factory fabricated M.S. box in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG M.S. sheet duly painted with red oxide primer followed by two coats of synthetic enamel paint complete with necessary conduit entry and DP/TPN; fixing arrangement and provision for compartment for loose wires, open able housing on the top and hold fast etc. including supply of all material, labour and T & P etc. required for proper completion of the work. (Sl. No. 1147) 600x480x200 mm. size

Supply and fixing of 240 volts 'L' series miniature circuit breaker 9 K.A / 10 K.A.in existing MCB, DB complete with connections as required as directed by Engineer-in-Charge (Sl. No. 1002) (a) 6 - 32 amps. CAT-B

Supply fixing and making connection of following FPMCBS complete in all respects as per direction and satisfaction of engineer-in-charge. (Sl. No. 1019) (a) 25 Amp. 4 Pole MCB CAT-B

Supply and fixing of power plug with 15A/250 V flush type switch and 3 Pin 15 A/250V flush type socket in suitable M.S. box of 175mmx100x50mm size Switch bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer. as directed by Engineer-in-Charge (Sl. No. 1139)

Supply and fixing Single Pole MCBS Blanking Plate complete in all respects as directed by Engineer-in-Charge CAT-B (Sl. No. 1034 B)

D-INTERNAL WATER SUPPLY & SANITARY WORKS Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. (Internal work - Exposed on wall) i/c cost of all material, labour, T&P etc. for proper completion of work. 25 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. (Internal work - Exposed on wall) i/c cost of all material, labour, T&P etc. for proper completion of work.15 mm dia nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete i/c cost of all material, labour, T&P etc. for proper completion of work. 15 mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 i/c cost of all material, labour, T&P etc. for proper completion of work. 15 mm nominal bore

Providing and fixing PTMT bib cock of approved quality and colour. i/c cost of all material, labour, T&P etc. for proper completion of work. 15mm nominal bore, 86 mm long, weighing not less than 88 gms

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms i/c cost of all material, labour, T&P etc. for proper completion of work. 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 i/c cost of all material, labour, T&P etc. for proper completion of work. 15 mm nominal bore

Providing and fixing PTMT stop cock of approved quality and colour. i/c cost of all material, labour, T&P etc. for proper completion of work. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 i/c cost of all material, labour, T&P etc. for proper completion of work.15 mm nominal bore

Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms i/c cost of all material, labour, T&P etc. for proper completion of work.

Providing and fixing extension nipple (size 15mmx50mm) /Elbow/Tee of G.I. i/c cost of all material, labour, T&P etc. for proper completion of work.

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. i/c cost of all material, labour, T&P etc. for proper completion of work.15 mm nominal bore, weighing not less than 32 gms

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank i/c cost of all material, labour, T&P etc. for proper completion of work.

Providing and fixing unplasticised PVC connection pipe with brass unions i/c cost of all material, labour, T&P etc. for proper completion of work. 30 cm length, 15 mm nominal bore

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required i/c cost of all material, labour, T&P etc. for proper completion of work.White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 liter low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required i/c cost of all material, labour, T&P etc. for proper completion of work. W.C. pan with ISI marked white solid plastic seat and lid

Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standard pattern including cutting & making good the walls wherever required for proper completion of work. White Vitreous China Flat back wash Basin size 550x400 mm with single 15 mm C.P. brass pillar tap.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required i/c cost of all material, labour, T&P etc. for proper completion of work. Kitchen sink with drain board, 510x1040 mm bowl depth 250 mm

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required i/c cost of all material, labour, T&P etc. for proper completion of work. Kitchen sink without drain board470x420 mm bowl depth 178 mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete i/c cost of all material, labour, T&P etc. for proper completion of work. Semi rigid pipe 32 mm dia

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes i/c cost of all material, labour, T&P etc. for proper completion of work. 75 mm diameter.

Providing and fixing on wall face unplasticised -PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion i/c cost of all material, labour, T&P etc. for proper completion of work. Coupler / Socket, 75 mm

Providing and fixing on wall face unplasticised -PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion i/c cost of all material, labour, T&P etc. for proper completion of work. Bend 87.5° / Elbow, 75 mm

M/S SUBHASH CHANDRA THAPLIYAL