REPAIR/ MAINTENANCE OF STEEL AND WOODEN FURNITURE AT 4 AFSB VARANASI UNDER GE AF GORAKHPUR

Amount

(A) Wooden Furniture Sofa Chair single seat (Small) FD-358 : Removing the unserviceable seat and back from sofa chair and all wood work shall be of first class hard wood (MP teak) and S&F new cushion for seat abd back shall be of U foam first quality 75 mm and 50 mm thick respectively fixed over 12mm ply wood shall be covered with good quality tapestry cloth as approved by GE. Hard PVC ring 25 mm dia shall be screwed to the bottom of legs and remaining all as per drawing , specified and directed .

Chair dining (MAP Drg) : Removing the unserviceable seat from chair dining and further All wood work shall be of first class hard (MP teak) & hard PVC ring shall be screwed to the bottom of the legs and S &F new 75 mm thick 32 density foam with fabric on seat of 12 mm thick BWR phenol bonded ply wood and remaining all as per drawing , specified & directed .

Foam cushion with tapestry cloth for sofa set 5 seats FD-281: Replacing/removing unserviceable cushion of sofa sets and providing new cushion of cool foam of 32 density 530mmx 500 mm and covered with tapestry cloth and over good quality cover shall be provided for seat and back of sofa sets . Complete all as directed and specified by Engr -in- charge .

Chair dining long back : FD-357 : Removing the unserviceable seat from chair dining and further All wood work shall be of first class hard (MP teak) & hard PVC ring shall be screwed to the bottom of the legs . S &F new 50 mm thick synthetic foam of 32 density covered with leatherette rexene made to shape as shown on Drg shall fixed with chair over 10 mm thick ply wood commercial and also leatherette rexene to be fixed on the back of the chair , complete all as specified and directed.

Peg Table : FD-277(450x300x380mm): Removing UNSV Top and S&F new top made out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size 450 x 300 mm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed ISI markedl as directed and specified

Peg Table : FD-277: Removing UNSV legs and S&F new legs made out of teak wood of size 30x50x360mm all as directed and specified

Peg Table : FD-277: Removing UNSV rails and S&F new long rails made out of teak wood of size 20x40x430mm all as directed and specified

Bed ply wood top : FD-246 : Removing UNSV both side ply wood from foot board of bed and provn of new ply wood 4 mm thick teak ply facing both side with teak wood edging 4mm thick complete all as directed and specified.

Bed ply wood top : FD-246: Removing UNSV both side ply wood from head board of bed and provn of new ply wood 4 mm thick of size 440x900 MM with teak ply facing both side with teak wood edging4mm thick complete all as directed and specified

Bed ply wood top : FD-246: Removing UNSV ply wood top provn of new ply wood 12 mm thick commercial type ISI marked of size 1980x870mm all as directed and specified

Bed ply wood top : FD-246: Removing UNSV legs and provn of new legs of size 60x60x400MM made to shape as per drawing with new bracket of teak wood all as directed and specified.

Bed ply wood top : FD-246 : Removing UNSV long rails and S&F of new long rails made with teak wood of size 35x90x1960mm complete all as directed and specified.

Bed ply wood top : FD-246 : Removing UNSV stiffener and S&F stiffener made with teak wood of size 40x60x880mm, as directed and specified.

Table centre : FD-274/235: Removing UNSV Top and S&F new top made out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size 900x450mm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed ISI marked , all as directed and specified

Table centre : FD-274/235 : Removing UNSV legs and S&F new legs made out of teak wood of size 30x60x375mm all as directed and specified.

Table centre : FD-274/235: Removing UNSV long rails and S&F new long rails made out of teak wood 20x50x900mmall as directed and specified.

Table dining for 8 person : FD-273: Removing UNSV Top and S&F new top made out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size 1800x900mm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed ISI markedl as directed and specified, all as directed and specified as specified & directed.

Table dining for 8 person : FD-273 Removing unserviceable long rail and provn of new long rail made with teak wood of size 1800x25x100mm as specified & directed.

Table dining for 8 person : FD-273 Removing unserviceable legs and provn of new legs made with teak wood of size 40x75x735mm as specified & directed.

Table dining for 8 person : FD-273 Removing of unserviceable short rail and S&F of new short rails made with teak wood of size 900x25x100mm, as specified & directed

Table dining for 8 person : FD-273 Removing UNSV Top and S&F new top made out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size 1500x900 0mm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed ISI markedl as directed and specified, all as directed and specifiedas specified & directed.

Table dinning 6 person : FD-273 Removing UNSV legs provn of new legs made with teak wood of size 40x75x735mm and tightening of legs with new bracket of teak wood all as directed and specified.

Table dinning 6 person : FD-273 Removing UNSV long rails and S&F new long rails made out of teak wood of size 1500x25x100mm, all as directed and specified.

Table dinning 6 person : FD-273 Removing UNSV short rails and S&F new short rails made out of teak wood of size 900x25x100mm, all as directed and specified.

Table writing : FD-275/249 emoving UNSV Top and S&F new top made out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size 1145x600 mmwith 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed ISI markedl as directed and specified, all as directed and specifiedas specified & directe

Table writing : FD-275/249 (1145x600x760mm) z Taking out UNSV ply wood from drawer box and provn of new drawer box made with 6 mm thick new ply wood commercial ISI marked all as directed and specified.

Table writing : FD-275/249 Taking out UNSV ply wood from drawer and provn of 6 mm thick new ply wood commercial type and tightening of front portion of drawer, all as directed and specified.

Table writing : FD-275/249 Taking out UNSV Knob and S&F new CP knob 40x40 mm size all as directed and specified.

Table writing : FD-275/249 Removing UNSV legs S&F new legs made with teak wood of size 35x35x735mm, all as directed and specified.

Teapoy : FD-232 Removing UNSV Top and S&F new top made out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size 600x450mm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed ISI markedl as directed and specified, all as directed and specifiedas specified & directe

Teapoy : FD-232 Removing UNSV legs and S&F new legs made out of teak wood of size 45x45mm at top cut to shape 25x25mm at botom and 520mm long, all as directed and specified.

Teapoy : FD-232 Removing UNSV rails and S&F new rails made out of teak wood of size 19x40x450mm, all as directed and specified.

Chair easy : FD-229 Removing UNSV front legs and S&F new legs made out of teak wood of size 545x55x25mm made to shape as per drawing complete all as specified and directed.

Chair easy : FD-229 Removing UNSV arms and S&F new arms made out of teak wood of size 610x65x25mm made to shape as per drawing complete all as specified and directed.

Chair easy : FD-229 Removing UNSV rear legs and S&F new legs made out of teak wood of size 425x55x25mm made to shape as per drawing complete all as specified and directed.

Chair easy : FD-229 Removing UNSV back or front rails and S&F new front rails of size 50x25x510 Mm made out of teak wood all as directed and specified

Chair easy : FD-229 Removing UNSV cane bead and S&F of new cane bead made with teak wood as specified & directed.

Chair easy : FD-229 Removing UNSV side rails and S&F new side rails made out of teak wood of size 70x40x575mm made to shape as per drawing complete all as specified and directed.

Chair dinning : FD-225 & 279 Removing UNSV side rails and S&F new side rails made out of teak wood of size 65x30x440mm complete all as specified and directed.

Chair dinning : FD-225 & 279 Removing UNSV rear legs and S&F new legs made out of teak wood of size 65x45x835mm made to shape as per drawing complete all as specified and directed.

Chair dinning : FD-225 & 279 Removing UNSV front legs and S&F new legs made out of teak wood of size 65x45x455mm, complete all as specified and directed.

Chair dinning : FD-225 & 279 Removing UNSV stiffener and S&F new stiffener of size 20x25x440 MM made out of teak wood all as directed and specified

Chair dinning : FD-225 & 279 Removing UNSV cane bead and S&F new cane bead made out of teak wood all as directed and specified

Chair writing : FD-280 Removing UNSV arms and S&F new arms made out of teak wood of size 60x25x510mm made to shape as per drawing complete all as specified and directed.

Chair writing : FD-280 Removing UNSV front legs and S&F new legs made out of teak wood of size 55x30x685, complete all as specified and directed.

Chair writing : FD-280 Removing UNSV rear legs and S&F new legs made out of teak wood of size 55x30x830mm, complete all as specified and directed.

Chair writing : FD-280 Removing UNSV side rails and S&F new side rails made out of teak wood of size 30x65x470mm, complete all as specified and directed.

Chair writing : FD-280 Removing UNSV back rest and S&F new back rest made out of teak wood all as directed and specified

Chair writing : FD-280 Removing UNSV stiffener and S&F new stiffener made out of teak wood of size 25x20x500mm,complete all as specified and directed.

Chair writing : FD-280 Removing UNSV cane bead and S&F new cane bead made out of teak wood all as directed and specified

Table dressing gents W/M : FD-31/251 Removing UNSV Top and S&F new top made out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size 900 x 380 mm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed ISI markedl as directed and specified.

Table dressing gents W/M : FD-31/251 Removing UNSV ply wood from drawer and provn of new ply wood 6mm thick commercial ISI marked complete all as specified and directed.

Table dressing gents W/M : FD-31/251 Removing UNSV Knob and S&F new knob 40x40mm complete all as specified and directed.

Table dressing gents W/M : FD-31/251 Removing UNSV mirror and back ply wood top S&F new mirror 5.5 mm thick of size 366x1220mm Make – Modi guard and new back ply wood 6mm thick commercial ISI marked of required size.

Table dressing ladies with mirror : FD-251 Removing U/S both side plywood 4mm thick one side teak ply facing BWP exterior grade of size 380x300 mm complete all as specified and directed.

Table dressing ladies with mirror : FD-251 moving UNSV Top and S&F new top made out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size 900 x 380 mm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed ISI markedl as directed and specified

Table dressing ladies with mirror : FD-251 Removing U/S mirror and back ply and S& F of new mirror 5.5mm thick of size 366x1220mm of Make-Madiguard with new ply wood on back of mirror 6mm th for commercial type ISI marked complete all as specified and directed.

Table dressing ladies with mirror : FD-251 Removing U/S Knob and S&F of new knob 40mm x 40mm complete all as specified and directed.

Table bed side : FD-276 Removing UNSV Top and S&F new top made of 19mm thick pre-laminated particle board decorated finish one side and white in other side phenol formaldehyde PWP exterior ISI marked of size 230x 450 mm complete all as specified and directed.

Table bed side : FD-276 Removing U/S back ply and S&F of new back ply 6mm thick commercial type 450x410 mm as specified & directed.

Sofa set 5 seater : FD-281 Removing U/S leg and S&F new leg made with teak wood of size 35x70x530mm complete all as specified and directed.

Sofa set 5 seater : FD-281 Removing U/S long rail and S&F of new long rail made with teak wood of size 35x100x1650mm complete all as specified and directed.

Sofa set 5 seater : FD-281 Removing U/S short rail and S&F of new short rail made with teak wood of size 35x100x690mm complete all as specified and directed.

Sofa set 5 seater : FD-281 Removing U/S arms and S&F new arms made with teak wood of size 35x70x745mm as per drawing, complete all as specified and directed.

Table Bed side MAP Drg : FD/E6/MAP/15( R) : Removing unserviceable sides and top of the table and S&F new sides & top made out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks . The shelves/drawer also should be provided/fitted of MDF Board 12 mm thick . The drawers shoud be pulled out/sliding with telescopic channel . New CP handle to be fitted with the drawer.The 18mm square pipe shall be painted two coat of enamel paint after preparation of surface and acoat of primer . Complete all as per drawing , specified and directed by Engr-in- charge .

Table 900x600 mm with drawer FD-283: Rmoving UNSV Top and S&F new top made out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size 900 x 600 mm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed ISI markedl as directed and specified.

Table 900x600 mm with out drawer FD-284: Rmoving UNSV Top and S&F new top made out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size 900 x 600 mm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed ISI markedl as directed and specified .

FD- 280/229/279 Removing UNSV cane plastic from chairs of any sorts and re-canning of chairs with 2mm wide cane plastic half round as Godrej pattern Make Premier rest as per drg and direction.

Polishing of wooden furniture Preparation of old wooden surface by scrapping, rubbing and removing old polish, putty, stains etc and cleaning as reqd apply fill the wood/cracks etc by putting yellow ochre etc so as to achieve proper surface for polishing. Apply high gloss French polish/sprit polish in one coat to achieve standard finish all as specified and directedby EIC (a) Chair Dinning FD-279/228/357/MAP Drg

(b) Chair easy all as specified and directedby EIC FD-229

(c) Chair writing all as specified and directedby EIC FD-280

(d) Table bed side all as specified and directedby EIC FD-248

(e) Table dinning 6 person all as specified and directed by EIC. FD-239

(f) Table centre all as specified and directed by EIC. FD-274

(g) Teapoy all as specified and directed by EIC. FD-232

(h) Table peg all as specified and directed by EIC. FD-236/217

(j) Bed hard with ply wood top all as specified and directed by EIC. FD-246

(k) Hat stand with mirror all as specified and directed by EIC. FD-233

(l) Table dressing gents all as specified and directed by EIC. FD-251

(m) Table dressing ladies all as specified and directed by EIC. FD-251

(n) Table writing all as specified and directed by EIC. FD-249

(o) Table dining for 8 person all as specified and directed by EIC. FD-243

(p) Sofa set 5 seats all as specified and directed by EIC. FD-281

(B) Steel Furniture Re-canning of chair Verandah : FD-259 : Repair by way of : removing u/s cane plastic 4mm wide and existing paint from chair verandah making surface by way of scrapping rubbing, cleaning for painting till glossy finish and applying one coat of synthetic enamel paint as approved and recaining of chair with 4 mm wide half round cane plastic. Make : PREMIER all as specified and directed by EIC.

Chair CB steel with arm and without arm : FD-75 Taling down existing seat frame with can and S & F of best quality of Ist class hard wood shisham wood (Seasoned) frame seat and seat shall be woven with 2 mm wide half round plastic cane and fixing of MS strip 12 mm x 2 mm x 485 mm long at the bottom of seat. all as specified and directed by EIC.

All as per item No 86 above but back only

Taking down old hand rest and S/F new hand rest of teak wood of size 460 x 30 x 25 mm made to shape as per drawing.

Almirah large steel : FD-1031 Taking down rivet of shelves and portion of new rivet of required size all as directed.

Almirah large steel : FD-1031 Removing u/s legs from existing almirah and S & F new legs made of 1 mm thick MS sheet as shown in drawing.

Almirah large steel : FD-1031 S & F in repair lock 6 lever fitted with screw. Make : Link / Godrej

Almirah large steel : FD-1031 S & F of repair chromium plate handle of 100 mm size as shown in drawing.

Almirah large steel : FD-1031 S & F in repair lock plate of size 100 x 200 x 4 mm of mild steel etc, complete fitted by welding to existing place.

Almirah large steel : FD-1031 S & F in repair bottom sheet of size 485 x 920 mm made out of 1 mm thick MS sheet as per drawing.

Teapoy Verandah : FD-255 Taking down unserviceable top and S&F new top made out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size 900 x 450 mmmm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed ISI markedl as directed and specified . paint rest as directed.

Almirah med steel : FD-1032 Riveting/Gas welding of broken shelves with providing new rivet complete allas specified and directed .

Almirah med steel : FD-1032 Removing u/s legs and S & F of new legs with mild steel of 1 mm thick as size mentioned in drawing.

Almirah med steel : FD-1032 . S & F in repair lock of 6 lever fitted with screw. Make Link / Godrej

Almirah med steel : FD-1032. S & F in repair chromium plated handle of 100 mm size as shown in drawing as shown in drawing.

Almirah med steel : FD-1032 S & F in repair lock plate of size 100 x 200 x 4 mm of mild steel etc, complete fitted by welding to existing place as shown in drawing.

Almirah med steel : FD-1032. S & F in Replacement 1.00 mm thick MS bottom sheet of size 440 x 765 mm as per drawing.

Charpoy GI pipe : FD-220. Removing of u/sNylon Newar from charpoy GI Pipeand S& F new 12MM thick ply wood top commercial best quality ISI marked of size 900 x 1980mm with 6 Nos screw and one Nos GI stiffener made out of 40x6 mm flat iron fix with nut and bolt at the centre of charpoy complete all as specified & directed.

Charpoy GI pipe : FD-220. Removing of u/s ply wood top from charpoy GI pipe and S& F new 12MM thick ply wood top commercial best quality ISI marked of size 900 x 1980mm and nut and bolt should be fitted with charpoy and also centre of of Charpoy the existing flat iron 40x6 mm should be welded complete all as specified & directed.

Charpoy GI pipe : FD-220. Removing unserviceable elbow 3 way 32mm dia and S & F of new elbow 3 way 32mm dia ISI marked complete all as specified & directed.

Charpoy GI pipe : FD-220 Removing unserviceable broken long rails and providing new rail made out of 32 mm dia med gde GI pipe 1870 mm long.

Charpoy GI pipe : FD-220 Taking out broken leg/short rail, cutting damaged threaded portion or cutting pipe at any point as directed and making thread and assembling as directed. Note : Old long/ short rail received from item No 88 & 89 shall be used for leg or shrot rail.

Steel dining chair with out arms -TP : Removing unserviceable seat from chairs and S&F new seat made of pressed ply wood of 12 mm thick in round shape of 415 mm dia and consisting of new 50 mm thick synthetic foam of 32 density covered with leatheertte rexene made to shape and shall fixed over 12 mm thick ply wood commercial . Apply lickel chromium polish on steel frame of chair after preparation of surface to e provided rubber shoes in bottom of the legs . complete all as directed and specified .

Running welding of steel furniture Running welding in repair to steel furniture by removing bends, broken members shall be welded to existing places welded portion shall be furnished by grinding , rubbing and shall be applied with two coat of synthetic enamel paint to match with existing surface after preparation of surface over one coat of red oxide primer.

Class room desk of size 1.20 Mtr x ,45 mtr -TP : Removing the unserviceable tops from desk and S&F new both tops(ie upper & lower tops) made out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size 1200 mm x 450mm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed . Steel frame of desk ie upper front stiffener shall be be removed by cutting to facilitate for siting and should be painted with synthitic enamel paint over a coat of redoxide after preparation of surface by scrubbing with sand paper , rubbing and cleaning complete all as per specified and directed.

Class room desk of size 1.20 Mtr x ,45 mtr -TP : Class room desk should be painted with synthitic enamel paint over a coat of redoxide after preparation of surface by scrubbing with sand paper , rubbing and cleaning and also provicde PVC shoes for legs complete all as per specified and directed.

Table office clk steel : FD-84 /1004 M&L for spot welding to existing broken legs ,stiffener & repair and get in smoothi functioning of drawers of and also removing the old unserviceable top and S&F new top made out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size 1200 mm x 600mm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot presse ll as directed and specifiedcomplete all as directed and shown on drg .

Table 900x600mm steel with drawer FD-1008 : Removing U/s top and S& F new topmade out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size900 mm x 600mm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed all as directed and specified. U/s lock of drawer of table should be replaced with new lock and Steel frame of the table shall be painted with synthetic enamel paint over a coat of red-oxide after perparation of surface by scubbing, rubbing and cleaning complete all as specified and directed .

Table office officers steel : FD-84 Removing U/s top and S& F new top made out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size1800 mm x 870 mm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed all as directed and specified. U/s lock of drawer of table should be replaced with new lock and Steel frame of the table shall be painted with synthetic enamel paint over a coat of red-oxide after perparation of surface by scubbing, rubbing and cleaning complete all as specified and directed

Painting of steel furniture : Preparation of surface by way of scrapping, rubbing, cleaning, removing old paint stain etc and applying one coat synthetic enamel paint of required shade as approved by spray painting. (a) Almirah large steel : FD-1031

(b) Almirah Med steel - FD-1032

(c) book case L/P steel - FD-90/1028

(d) Rack adjustable steel 6 tier 600 mm wide x 400m depth - FD-106

(e) Table office clerk steel - FD-84

(f) Table office officer steel - FD-84

(h) Chair CB steel with arms - FD-75

(j) Chair CB steel with out arms - FD-75

(l) Almirah Med steel 1/2H x1/2S FD-1033

(l) Almirah large steel 1/2H x1/2S FD-1034

(m) Locker Steel FD-1029

(n) Bed hard steel (MAP Drg) FD/E6/MAP/08

(o) Bunk bed

M S Enterprises (BID ID -3085852)