SPECIAL REPAIR TO TOILET IN BILLET AREA AT AFS JAISALMER

Taking down door chowkats or frames exc.1.5sqm but nexc 4 Sqm each with shutters (without taking off shutters from the frame).

Taking down chowkats or frames n. exc.1.5sqm each with shutters (without taking off shutters from the frame).

M&L Framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, doors or gates, ladders, framed balusters, walk ways, railings, frame work of watertanks etc ant type of work complete all as specified and directed. Fe 410 -W (Gde- E- 250) quality-A

S&F 2nd class hard wood plain, framed , paneled shutters 35mm thick (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (part-I) , kiln seasoned and chemically pressure treated complete

S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm th rigid PVC foam sheet reinforced with MS sq tube as per specification complete

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitabale PVC sheet beading, and jointed together with solvant cement, and S&F in the frame at side as per specification and drawing.

S&F of Powder coated aluminium (minimum thickness of powder coating 50 micron) work for frames & shutters of doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard / appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasketetc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per the directions of Engineer-in-Charge.

S&F for expanded metal mesh Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of engineer - in- charge.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.80 Sqm in each panes fixed any bldg hight complete all as specified and directed.

S&F 4mm thick figured glass, pin head type and glazing with oil putty in square n. exc 0.50 Sqm in each panes fixed any bldg hight complete all as specified and directed.