Maintenance to RD road to Thuapadi road in B Cuttack Block for the year 2026 27

Clearing grass and shrub jungle and uprooting stumps and small bushes and tree below 0.3M on premeasurement removal of rubbish on both sides of the road to facilitate widening of berms, disposal of the stuff including all labour, T&P, Cess, articles required for the work etc. complete and direction of the Engineer-in-charge.

Providing & laying 75mm compacted thickness of WBM specification with following size of IRC graded metal of approved quality from approved quarry and spreading on the road surface uniformly metal to specified thickness and hand packing the voids with small stones to proper camber and grade conveying moorum from stacks stacked at work site or at approved stacking yard including labour charges of moorum spreading over the metal surface filling the interstices of metal and consolidation with three wheeled steel Roller 8 to 10 tonnes in stage of proper grade & camber & turfedging including hire and running charges of Roller and all other machineries including all labour, T&P and cost, conveyance Royalty, DMF, EMF & Additional Charges & of all materials required for the work with Cess etc complete in all respect as per specification and direction of the Engineer-in-charge. IRC Gr-III Metal

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per MORD Technical Specification Clause 502 for low porosity surface and as per direction of Engineer-in-Charge.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503 of MoRD & as per direction of Engineer-in-Charge.

Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder of 60/70 penetration grade of bitumen,transporting the hot mix to work site,layingwith a hydrostatic paver finisher with sensor control to the required grade,level and alignment and rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per Clause 508 of MoSRT&H Specification for road & Bridge works (4th Revision) with cost,conveyance,Royalty, DMF, EMF & Additional Charges ,including cost of all labour,T&P and Cess required for the work complete in all respects as per direction of the Engineer-In-Charge.

Construction of enbankment with approved material obtained from borrow ptis with all lead and lifts transporting to site by machanical means within a lead of 5Kms spreading,grading to required slope and compacting to meet requirements of table 300-2 & clause 305 of MOSRT & H specification including Royalty, DMF, EMF & Additional Charges charges and cost of all materials labour charges,machineries, T&P Cess etc required for the work complete as per direction of E.I.C