Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹14.3 LAccepted-AOC JANNAT MANZIL CHACHAI DISTT ANUPPUR MP | L-1 | Accepted-AOC Accepted as L-1 | |
| 2 | Rejected-Technical VILL KAZIYAPUR POST SURATGANJ TAHSHEEL RAMNAGAR KAZIYAPUR NEAR JHEEL LUCKNOW UTTAR PRADESH 227115 UDYAM UP 14 0003184 | 227115 | - | Rejected-Technical Reject as L-2 bidder | |
| 3 | Rejected-Technical RAILWAY COLONY DHANPURI | - | Rejected-Technical Reject as L-3 bidder |
Tender Value
₹28.8 L
EMD Value
₹36,100
Closing Date
1 May 2023, 5:00 pmClosed
Staff Officer EnM SECL Sohagpur Area
Staff Officer EnM SECL Sohagpur Area Dhanpuri Distt Shahdol MP 9425533402
Dismentalling line which has enclosed under periphery of Batura mines near Khanda village, a/c to survey 2.26 KM 11 KV,1.74 KM LT and one no. 25 kva dtr Gidha tola basti has proposed to dismentle and 3.86 KM 11KV line will tap from existing 11 KV Med
2023_SECL_277271_1
SECL/SGP/EnM/eT/23-24/201 Dtd 13.04.2023
Open Tender
Electrical and Maintenance Works
Item Rate
90 days
Rampur Batura OCM Sohagpur Area
As per NIT and Tender documents
5 documents required · 5 mandatory
₹36,100
30 May 2023
14 Apr 2023
3 May 2023
14 Apr 2023
1 May 2023
15 Apr 2023
14 Apr 2023 - 24 Apr 2023
Amount
Dismentalling line which has enclosed under periphery of batura mines near khanda village,a/c to survey 2.26 KM 11 KV,1.74 KM LT and one no 25 kva dtr gidha tola basti has proposed to dismentle and 3.86 KM 11KV line will tap from existing 11 KV mediyaras feeder to supply 3 no 25 kva xmer near bairiha at Rampur Batura OCM of Sohagpur Area.
11 KV LINE ON 140 KG.,8.0 MTRS.LONG PCC POLES WITH RABBIT CONDUCTOR AVERAGE SPAN OF 83 MTR (3.86 KM) ( Task no. C-1.2)- PCC POLE 140 KGS 8 MTRS LONG
11 KV V CROSS ARM 65X65X6 MM. ANGLE TYPE
BACK CLAMP FOR 140 KG PCC POLE MS FLAT 50X6 MM
11 KV TOP CLAMPS 65X65X 6MM ANGLE TYPE
EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2.5 MTR LEAD OF 4.0 MM G.I WIRE
11 KV, 5KN PIN COMPOSITE POLYMER INSULATOR
AAAC RABBIT CONDUCTOR 0.05 SQ. INCH (55 SQ.MM.AL.EQ.)
JOINTING SLEEVES (ALUMINIUM) FOR RABBIT
STAY SET WITHOUT STAY WIRE 16 MM. (PAINTED)
STAY CLAMP FOR PCC POLE 140 KG 8.0 M LONG GALVANIZED FLAT 50X6MM (1.35 KG)
STAY WIRE 7/3.15 MM.(7/10 SWG
BACK FILLING OF POLES WITH BOULDERS
CONCRETING (1:3:6) OF PCC POLE @ 0.05 CMT. PER POLE (INCUDING BASE PADDING & MUFFING)
CONCRETING (1:3:6) OF STAY @ 0.2 CMT. PER STAY (16MM)
RED-OXIDE PAINT
ALUMINUM PAINT
ANTI CLIMBING DEVICE (BARBED WIRE 3.5 KG) GS 2.5 MM DIA (12 SWG)
DANGER BOARD ENAMELED 11 KV
ALUMINIUM BINDING WIRE AND TAPE
M S BOLT WITH NUT 16X200 MM
M S BOLT WITH NUT 16X140 MM
M S BOLT WITH NUT 16X40 MM
11 KV D.P.STRUCTURES ON 140 KG.,8.0 MTRS.LONG- PCC POLES FOR STRAIGHT LINE(10 No.) ( Task no. C-6.1) -PCC POLE 140 KGS 8 MTRS
DC.CROSS ARMS 4` (1.2 METER) CENTRE TO CENTRE 100X50X6MM. ISMC CHANNEL
11 KV, 45 KN DISC T&C COMPOSITE POLYMER LONG ROD INSULATOR
11 KV STRAIN HARDWARE (T&C TYPE ) FITTINGS
11 KV, 5KN PIN COMPOSITE POLYMER INSULATOR
BRACING SET FOR 4 FEET (1.2 MTR) CENTRE DP ANGLE OF 65X65X6MM
STAY SET WITHOUT STAY WIRE 16 MM. (PAINTED)
STAY CLAMP FOR PCC POLE 140 KG 8.0 M LONG GALVANIZED FLAT 50X6MM (1.35 KG)
BACK CLAMP FOR 140 KG PCC POLE MS FLAT 50X6 MM
STAY WIRE 7/3.15 MM.(7/10 SWG
CONCRETING (1:3:6) OF PCC POLE @ 0.05 CMT. PER POLE (INCUDING BASE PADDING & MUFFING)
CONCRETING (1:3:6) OF STAY @ 0.2 CMT. PER STAY (16MM)
EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2.5 MTR LEAD OF 4.0 MM G.I WIRE
RED-OXIDE PAINT
ALUMINIUM PAINT
ANTI CLIMBING DEVICE (BARBED WIRE 3.5 KG) GS 2.5 MM DIA (12 SWG)
DANGER BOARD ENAMELED 11 KV
M S BOLT WITH NUT 16X 165 MM
M S BOLT WITH NUT 16X 140 MM
M S BOLT WITH NUT 16X 65 MM
ROAD CROSSING FOR 11 KV LINE (02 No.) ( Task no. C-8)-H-BEAM 11 METER 152 X 152 MM 37.1 KG/ METER
11 KV BRIDLING CROSS ARMS 65X65X6MM
BACK CLAMP FOR H BEAM POLE OF 65X8 MM MS FLAT
11 KV TOP CLAMPS BRIDLING TYPE 65X65 X6MM
EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2.5 MTR LEAD OF 4.0 MM G.I WIRE
11 KV, 5KN PIN COMPOSITE POLYMER INSULATOR
AAAC DOG CONDUCTOR 0.05 SQ. INCH (55 SQ.MM. AL.EQ.)
11 KV GUARDING CHANNEL 75X40X6 MM
JOINTING SLEEVES (ALUMINIUM) FOR DOG CONDUCTOR
STAY SET WITHOUT STAY WIRE 16 MM. (PAINTED)
H.BEAM CLAMPS 65X8MM FLAT
STAY WIRE 7/3.15 MM.(7/10 SWG)
G.I. WIRES 5.0 MM. (6 SWG)
G.I. WIRES 4.0 MM. (8 SWG)
CONCRETING (1:3:6) OF H- BEAM @ 0.65 CMT.PER POLE (BASE PEDDING + MUFFING)
CONCRETING (1:3:6) OF STAY @ 0.2 CMT. PER STAY (16MM)
RED-OXIDE PAINT
ALUMINUM PAINT
ANTI CLIMBING DEVICE (BARBED WIRE 3.5 KG) GS 2.5 MM DIA (12 SWG)
DANGER BOARD ENAMELED 11KV
ALUMINIUM BINDING WIRE AND TAPE
M S BOLT WITH NUT 16X200 MM
M S BOLT WITH NUT 16X90 MM
STAY EYE BOLT 16MM DIA
11KV TP STRUCTURE ON PCC POLE- (03 No.) ( Task no. C-9.2)-(PCC POLE 140 KGS 8 MTRS LONG
DC.CROSS ARMS 4` (1.2 METER) CENTRE TO CENTRE 100X50X6MM. ISMC CHANNEL
BACK CLAMP FOR 140 KG PCC POLE MS FLAT 50X6 MM
11 KV, 45 KN DISC T&C COMPOSITE POLYMER LONG ROD INSULATOR
11 KV STRAIN HARDWARE (T&C TYPE) FITTINGS
11 KV, 5KN PIN COMPOSITE POLYMER INSULATOR
BRACING SET FOR 4 FEET (1.2 MTR) CENTRE DP ANGLE OF 65X65X6MM
STAY SET WITHOUT STAY WIRE 16 MM. (PAINTED)
STAY CLAMP FOR PCC POLE 140 KG 8.0 M LONG GALVANIZED FLAT 50X6 MM (1.35 KG)
STAY WIRE 7/3.15 MM.(7/10 SWG)
CONCRETING (1:3:6) OF PCC POLE @ 0.3CMT.
CONCRETING (1:3:6) OF STAY @ 0.2 CMT. PER STAY (16MM)
EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2.5 MTR LEAD OF 4.0 MM G.I WIRE
RED-OXIDE PAINT
ALUMINUM PAINT
ANTI CLIMBING DEVICE (BARBED WIRE 3.5 KG) GS 2.5 MM DIA (12 SWG)
DANGER BOARD ENAMELED 11 KV
M S BOLT WITH NUT 16X165 MM
M S BOLT WITH NUT 16X140 MM
M S BOLT WITH NUT 16X65 MM
M S BOLT WITH NUT 16X40 MM
L.T.LINES 3 PHASE 5 WIRE ON PCC SUPPORT USING AERIAL BUNCHED XLPE CABLE WITH MAXIMUM SPAN OF 50 METERS (I) 3 X 50 SQ.MM.(1.74 KM.) ( Task no. D-2.1)- PCC POLE 140 KGS 8 MTRS LONG
TENSION CLAMP FOR DEAD END FOR LT A.B CABLE
SUSPENSION CLAMP FOR LT AB CABLE
TENSION CLAMP FOR DEAD END WITH ATTACHMENT
CLAMPS FOR NEUTRAL
PIERCING CONNECTOR TYPE- I, 1P/3P (MAIN 16-50SQMM TAP- OFF 16-50SQMM
PIERCING CONNECTOR TYPE-II (MAIN 16-50 SQMM TAP-OFF 16-50 SQMM)
LT XLPE AIR BUNCH CABLE 3X50 SQMM + 1X35 SQMM INSULATED NEUTRAL CUM MESSENGER +1X16 SQMM
STAY SET WITHOUT STAY WIRE 16 MM. (PAINTED)
STAY CLAMP FOR PCC POLE 140 KG 8.0 M LONG GALVANIZED FLAT 50X6 MM (1.35 KG)
STAY WIRE 7/3.15 MM.(7/10 SWG)
BACK FILLING OF POLES WITH BOULDERS
CONCRETING (1:3:6) OF FOR POLES @ 0.05 CMT. FOR POLE (BASE PADDING + MUFFING)
CONCRETING (1:3:6) OF STAY @ 0.2 CMT. PER STAY (16MM)
M S BOLT WITH NUT 16X90 MM
M S BOLT WITH NUT 16X65 MM
M S BOLT WITH NUT 16X40 MM
EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2.5 MTR LEAD OF 4.0 MM G.I WIRE
SPRING LOADED BUSBAR SYSTEM SUITABLE FOR 1 INCOMING 3 OUTGOING 3 - PHASE CIRCUIT
SPRING LOADED BUSBAR SYSTEM SUITABLE FOR 1 INCOMING 6 OUTGOING 1 -PHASE CIRCUIT
(II) 25 KVA USING NEW DTR ON 140 KG., 8.0 MTRS.LONG PCC POLE SUPPORTS(01 No.) ( Task no. E-1.2)- PCC POLE 140 KGS 8 MTRS LONG
DC.CROSS ARMS 8` (2.4 METER ) CENTRE TO CENTRE 100X50X6 MM CHANNEL
BACK CLAMP FOR 140 KG PCC POLE MS FLAT 50X6 MM
11 KV, 45 KN DISC T&C COMPOSITE POLYMER LONG ROD INSULATOR
11 KV STRAIN HARDWARE (T&C TYPE) FITTINGS
GALVANISED D.O.MOUNTING CHANNEL 75X40X6MM
DO FUSE UNIT COMPLETE -11 KV
11 KV, LA POLYMER TYPE GAPLESS /METAL OXIDE 9 KV , 5 KA LINE TYPE
TRANSFORMER MOUNTING CHANNEL 100X50X6MM
TRANSFORMER CLAMPING SET 50X50 X6 MM ANGLE 460MM LONG
TRANSFORMER BELTING SET 50X50 X6MM ANGLE WITH TWO CROSS FIXING CHANNEL
STAY SET WITHOUT STAY WIRE 16 MM. (PAINTED)
STAY CLAMP FOR PCC POLE 140 KG 8.0 M LONG GALVANIZED FLAT 50X6 MM (1.35 KG)
STAY WIRE 7/3.15 MM.(7/10 SWG)
CONCRETING (1:3:6) OF PCC POLE @ 0.5 CMT. PER POLE
CONCRETING (1:3:6) OF STAY @ 0.2 CMT. PER STAY (16MM)
AAAC RABBIT CONDUCTOR 0.05 SQ. INCH (55 SQ.MM. AL.EQ.)
DANGER BOARD ENAMELED 11 KV
GI EARTHING ROD , 20 MM DIA ,2000 MM. LONG
ANTI CLIMBING DEVICE (BARBED WIRE 3.5 KG) GS 2.5 MM DIA (12 SWG)
RED-OXIDE PAINT
ALUMINUM PAINT
M S BOLT WITH NUT 16X250 MM
M S BOLT WITH NUT 16X200 MM
M S BOLT WITH NUT 16X140 MM
M S BOLT WITH NUT 16X90 MM
M S BOLT WITH NUT 16X65 MM
M S BOLT WITH NUT 12X140 MM
METER CUM PROTECTION BOX FOR 25 KVA DTR
XLPE LT 1 - CORE ALUMINIUM UNARMOURED 16 SQMM CABLE
3- PHASE 4 -WIRE 20-80 AMP ACCURACY CLASS 1 LCD DISPLAY STATIC WHOLE CURRENT METER
DTR 11/0.4 KV 25 KVA ALUMINUM
Total impact of GST for the purpose of CTC
AJAY KUMAR SINGH
Vindhyavasini Electrical workshop
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .