SPECIAL REPAIR/REPLASTERING AND PAINTING OF BOUNDARY WALL ON OLD PALAM ROAD INCLUDING NECESSARY B/R WORKS AT AF STN PALAM, DELHI CANTT-10

Amount

Demolition of brick work or stone/boulder masonry built in cement mortar including all quions/arches, pillars etc. complete all as specified and directed

Taking down cement plaster on brick or concrete wall surfaces etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed

Taking down grit plaster on brick or concrete wall surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. .

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. .

Demolition of Reinforced Concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Material and labour for brick work with Sub class 'B' bricks, straight or curved on plan to any radius, built in CM 1:6 complete all as specified and directed.

All as per ser item no. 6 above but except bricks complete all as specified and directed.

M&L for washed stone Grit Plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 03 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement : 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern incl scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed. Note: Payment for providing grooves shall be made separately.

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and directions.

M&L for 15 mm thick cement plaster on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 to be finished even and smooth without using extra cement with water proofing compound by weight as per manufacturer's instructions complete all as specified and directed.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:6 to be finished even and smooth without using extra cement with water proofing compound by weight as per manufacturer's instructions complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate for fixing of angle or post and clamps etc. rates for use of formwork (straight or curved) are included complete all as specified and directed..

M&L for reinforced cement concrete type B-1 1:2:4 (20 mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed

M&L for Form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc. complete all as specified and as directed.

S&F mild steel TMT bar 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for column , hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. .

S&F mild steel TMT bars 8mm dia and over upto and including10 mm dia, cut to length bent to shape required including cranking bending spirally as in stirrups,spacer etc binding with and including mild steel wire of 0.9mm dia or securing with clips complete all as specified and as directed.

S&F in repair for Galvanised barbed wire Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc.complete all as specified and as directed (each line wire to be measured).

Fixing only in repair for Galvanised barbed wire Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc.complete all as specified and as directed (each line wire to be measured).

S&F Mild steel work such as angle iron post, flat iron in fencing including cutting as making double swan neck i.e "Y" shaped including welding with proper overlapping & welding MS Plate with angle iron bottom as directed drilling holes notching for wire etc embedded in concrete fixed vertically conforming to Fe 290 grade E-165 complete all as specified and as directed. Note : Embedded portion of Angle Iron post shall be treated with tar black paint.

Supply and fixing concertina coil with punched tape of 600 mm dia, centre core wire shall be minimum 2.5 mm dia of mild steel wire conforming to IS 280-2006. Galvanised coating of steel concertina coil confirming to the requirements as laid down for medium coated wire in IS 4826 " Hot dipped galvainsed coating of round steel wires" concertina coil shall be fixed in diamond shape with help of dovetail two handle and spikes shall be fixed at both end of coil, minimum straight length of the wire 150 RM of 10 RM of work , minimum weight 13.5 Kg for 10 RM of work i.e 90 gm per RM of wire complete all as specified and as directed.

M&L for preparation on newly plastered/concrete surfaces including applying Asian Paints Damp proof fibre reinforced elastomeric liquid waterproofing membrane or equivalent in Berger paints/ Shalimar paints for one coat of self priming with 33% dilution and after this applying Two coat of Asian Paint Apex Ultima Protek (Super luxury) or equivalent in Berger paints/ Shalimar paints pure acrylic latex based with higher elongation and crack bridging ability upto 2mm apply on required complete all as specified and directed. Note : Complete Qty of material will be submitted to Engr-in-Charge and work must be got executed through authorised Applicator of manufacturer and shall be got approved from GE before commencement of work).

M&L for complete removal of existing treatment of old decorated surfaces of walls by sanding started with Asian paints true care wall sander/ manual with variable speed(1500-2700 RPM), after surface sanding applying Asian Paints Damp proof fibre reinforced elastomeric liquid waterproofing membrane or equivalent in Berger paints/ Shalimar paints for one coat of self priming with 33% dilution and after this Two coat of Asian Paint Apex Ultima Protek (Super luxury) or equivalent in Berger paints/ Shalimar paints pure acrylic latex based with higher elongation and crack bridging ability upto 02mm apply on required complete all as specified and directed. (Note Complete Qty of material will be submitted to Engr-In-Charge and work must be got executed through authorised Applicator of manufacturer and shall be got approved from GE before commencement of work) Note for item no 21 & 22 : MOU with Manufacturers of Paints : Irrespective of whatever specified elsewhere in tender documents, the work ( for item no. 3, 4 & 35 of Sch’A’ ) shall be executed through authorized applicator of manufacturer of Asian paints(Apex) / Berger paints / Shalimar paints only. Tenderers are deemed to have entered into a triparty agreement between tenderer, said manufacturer of Paints and their authorised Applicator and a valid MOU on Non Judicial Stamp paper of Rs. 100/- towards same is to be submitted within 15 days to GE from date of commencement of work as mentioned in Work order no 1 provided by GE. In case of non-submission of MOU within 15 days from date of commencement of work (stated in WO No 1) by tenderer to the GE , same shall be immediately brought to the notice of Accepting officer and contract shall liable to be cancelled on default of tenderer. MOU shall also cover the Guarantee and defect rectification during guarantee period and the aspect that work will have to be completed within stipulated time period mentioned in contract by the authorised applicator of paints. Contractor is liable to collect the details of work from Engr-in-Charge on weekly basis and submit completion report after assigning of location(s) for execution of work to Engr-in-charge as directed. Authorised Applicator of above mentioned Paint Manufacturers shall have valid authorization letter from the manufacturer issued not earlier than 60 days from the Bid submission start date of this tender.

M&S for preparation of old concrete or plaster surface, plain/kerb stone moulded over 10cm width or girth by cleaning, brushing etc and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old painted surfaces of steel and iron surfaces of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M/S Parshant Associates

PIONEER REFRIGERATION AND ELECTRICALS

Atish Builders LLP

SHYAM ENTERPRISES

Shiv Shankar Nirman Co.