Loading
Loading…
Loading…
Tender Value
₹10.2 Cr
EMD Value
₹15 L
Closing Date
10 Aug 2026, 9:30 pm
Karnataka State Road Transport Corporation
karibasappa s
9886529784
Construction of PME Seva Funded Electric Bus Depot at Tumakur
KSRTC/2026-27/BD/WORK_INDENT186
KSRTC/2026-27/BD/WORK_INDENT186
Open
Buildings
Two Tender Document System(Two Cover)
KSRTC Divisional Controller Office Tumakuru
7 documents required · 7 mandatory
To Qualify for award of this contract the tenderer must have valid Class I Contractor Registration Certificate, registered in KPWD / MES / CPWD as on the Date of Tender Notification. Scanned copy of Valid contractors Registration Certificate.
To Qualify for award of this contract the tenderer, as a prime contractor, should have in his name Satisfactorily completed at least One Single work of Similar Nature of RCC Framed Structure Building Work with C.C. Pavement Costing not less than Rs 509.88 Lakhs. The work should have been commenced and completed in any year during the last five financial years (i.e from 01-04-2021 till date of submission) i.e the work must have commenced on or after 01-04-2021 and completed till the date of submission of tender.Note: The work done certificate shall clearly mention the date of commencement & date of completion. Other wise it will not considered for evaluation.Scanned copy of the Work done Completion Certificate, Certified by an Officer not below the rank of Executive Engineer in case of works done in Govt.,/ public sector undertakings
To Qualify for award of this contract the Tenderer should have in his name Executed in any one Financial year during the last 5 years (i.e, during the years 2021-22 , 2022-23 , 2023-24 ,2024-25 & 2025-26, the following minimum quantities of work in any of the Government / Public Sector Undertaking.1.RCC M25 and Above Grade 981.80 cum2. TMT/Mild Reinforcement Steel 153.00 Tonne3. granite/Vitrified/Ceramic Flooring 1199.00Cum4. Brick Work 582.12cum5. Wet Mix/DLC/GSB 1822.40Cum6. M30 & above Grade Pavement Work:-1324.20Cum7. M.S Angular/Tubular Work29.81Tonne8. Electrical Work:- 98.14LakhsNOTE Incase of Solid block masonry work Sqm Qty will be Converted to Cum.Scanned copy of the Work done Certificate, Certified by an Officer not below the rank of Executive Engineer in case of works done in Govt.,/ public sector undertakings
Liquid assets and or availability of credit facilities of not less than Rs. 305.93 Lakhs (credit lines /letters of credit /certificates from Banks) for meeting the fund requirement etc.Scanned Copy of the Letter of Credit/From any nationalized Bank /Schedule bank (excluding Co-operative banks), clearly specifying name of the work (as per the prescribed format) (Annexure-A) LOC Note :The certificate should contains Name of the work, and address to the Executive Engineer, KSRTC, CE Division, Tumakuru and Valid dates and amount etc.
To Qualify for award of this contract the tenderer in his name should have, in the last five financial years ( i.e. during the years 2021-22,2022-23, 2023-24 , 2024-25 & 2025-26) achieved in at least two financial years a minimum average financial turnover of Rs 2039.53 Lakhs (in all classes of civil engineering construction works only ).Scanned copy of audited profit / loss statement of at least two financial years in which minimum financial turnover of Rs. 2039.53 Lakhs. is achieved . (Certified by Chartered Accountant along with UDIN and membership number only. Statement issued by others will not qualify for eligibility).
To Qualify for award of this contract the assessed available tender capacity of the tenderer should be more than the amount put to tender. Note: The bid capacity of the tenderer is calculated based on the formula. Assessed Available Tender Capacity (Ax N x 1.5) B) WhereA Maximum value of Civil Engineering works, (updated to the financial year of Tender invited), executed in any one year during the last five years. (Completed as well as works in progress).B Value at price level (updated to the financial year of tender invited) of existing commitments and ongoing works to be completed during the next two years.N Number of years prescribed for completion of the work for which tender is invited.1.5 Multiplying factor for assessing the available tender capacity for works costing above Rs.100.00LakhsThe bidder/Contractor must submit details of existing commitments and on going works to be completed in the Prescribed format only (Annexure B) Details of the works which have been completed and final bill is yet to be settled should also be provided .In case the bidder does not have any existing commitments, the same should be indicated as NIL in the prescribed format duly signed by the bidder Details submitted in any other format or other format or submission of document in which the bidder himself has calculated the bid capacity will not be considered and will not qualify for eligibility
1.Excavator JCB/Hitachi 01nos 2.Tipper04 nos 3. Water Tanker with truck/tractor mounted minimum 6000.00lts capacity 01Nos 4.Shuttering3700Sqm 5. Self loading Concrete Mixer01Nos 6.Soil Compacter Vibrator Roller01Nos.Scanned Copy of RC/Purchase Invoice if owned and If machinery hired/leased concerned agreement with relevant machinery document with agreement Should be in valid Period and agreement Date shall be furnished.
₹7,500
₹15 L
11 Jul 2026
11 Jul 2026
12 Aug 2026
28 Jul 2026
30 Jul 2026
Construction of PME Seva Funded Electric Bus Depot at Tumakur
Earth work excavation for Foundation by Manual means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cautio...
Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels, key trenches, foundation of Buildings and bridges and such simillar works in all kinds of soils, as per ...
Providing and Filling in foundation with granite / trap broken metal 100mm. and down size and with approved sand including hand packing, ramming, watering, including cost of all materials and labour ...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works andother parallel works from 0.50m to 3.50 m height....
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works andother parallel works from 0.50m to 3.50 m height....
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works andother parallel works from 0.50m to 3.50 m height....
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreadin...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) ...
Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:3 (1 cement : 3 coarse sand) including cost of all material...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 1 cement : 5 coarse sand finished with a top layer 6 mm thick cement plaster with cement mo...
Providing 12mm cement plaster on the rough side of single or half brick wall of mix 1:6 1 cement: 6 fine sand including rounding off corners wherever required smooth rendering, providing and removi...
Providing 6 mm cement plaster with cement mortar 1:3 1 cement : 3 fine sand on concrete surface ceilings including rounding off corners wherever required smooth rendering, providing and removing s...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18...
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 percent and conforming to I.S. 15622, of approved make, in all...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing Mathi or Nandi wood frames for false ceiling, partitions etc., main battens of size 50x12.5mm at 600 mm c/c and cross battons 38mmx50mm at 600mm c/c sawn and putup including cost of materia...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows and other Frames/Chowkhat comprising of virgin PVC polymer of K value 58 60 (Suspen...
Providing and fixing factory made Green certified, Anti Termite, UV resistant,high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisin...
Providing and fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elast...
Providing and fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions ...
Providing and fixing M.S. grills of required pattern in frames of win dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...
Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 percent perforated area with perforation size and pattern as approved by the Engineer in charge and as per manufact...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied at 1.67 ltr/10 m² over and including priming coat of exterior primer applied at 2.20 kg/10 m²) with...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular...
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour , 600 mm long towel rail with...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 g (CSR 2023 24/Vol 2 / 118 / 13.17.1 )
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, thi...
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, thi...
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, thi...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at join...
Supplying S andS RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP 3 Class conforming to IS:458 1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work ...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Supply and delivery at site GM (copper alloy) gate valves confirming to Class I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...
Supply and delivery at site GM (copper alloy) gate valves confirming to Class I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...
Supply and delivery at site GM (copper alloy) gate valves confirming to Class I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...
Providing and fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc...
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width u...
Water purification plants: Providing, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per t...
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the bu...
Providing and fixing 100 mm sand cast Iron grating for gully trap (SRP Vol 2 / 128 / 14.29 )
Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with c...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer in charge) 0.50 mm (+ 0.05 percent) total coated thickness with zinc coating...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) ...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) ...
Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:3 (1 cement : 3 coarse sand) including cost of all material...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mo...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mo...
Providing 12 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing 12 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing 6 mm cement plaster with cement mortar 1:3 1 cement : 3 fine sand on concrete surface ceilings including rounding off corners wherever required smooth rendering, providing and removing s...
Providing 6 mm cement plaster with cement mortar 1:3 1 cement : 3 fine sand on concrete surface ceilings including rounding off corners wherever required smooth rendering, providing and removing s...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing Mathi or Nandi wood frames for false ceiling, partitions etc., main battens of size 50x12.5mm at 600 mm c/c and cross battons 38mmx50mm at 600mm c/c sawn and putup including cost of materia...
Providing Mathi or Nandi wood frames for false ceiling, partitions etc., main battens of size 50x12.5mm at 600 mm c/c and cross battons 38mmx50mm at 600mm c/c sawn and putup including cost of materia...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows and other Frames/Chowkhat comprising of virgin PVC polymer of K value 58 60 (Suspen...
Providing and fixing factory made Green certified, Anti Termite, UV resistant,high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisin...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete
Providing and fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC (Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elas...
Providing and fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions ...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 percent and conforming to I.S. 15622, of approved make, in all...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied at 1.67 ltr/10 m² over and including priming coat of exterior primer applied at 2.20 kg/10 m²) with...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (For First Floor)
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and...
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually con...
Providing and fixing 100 mm sand cast Iron grating for gully trap (SRP Vol 2 / 128 / 14.29 )(For First Floor)
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the p...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the p...
Supply and delivery at site GM (copper alloy) gate valves confirming to Class I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwe...
Supply and delivery at site GM (copper alloy) gate valves confirming to Class I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwe...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the bu...
Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with c...
WORK SHOP Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mount...
Providing and fixing ball bearing for rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge.(C...
Extra for providing mechanical device chain and crank operation for operating rolling shutters: Exceeding 10.00 m² and upto 16.80 m² in the area including cost of materials, labour, usage charges of...
Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer in charge, (area of grill to be measured) including cost of mat...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Construction of M40 Grade un reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base in recommended proportions, coarse and fine aggregate conforming to IS 383:2016, maximum...
Supplying, fitting and placing Mild Steel Reinforcement complete as per drawing and technical specification (SR 23 24 ,Vol I (P 18/2.12)
Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting machine with diamond studded saw within 4 8 hours of casting of bay / slab etc. complete inc...
Hydraulic Excavator of 0.9 m3 bucket for dispose the unwanted debries Loading SR23 24, (Vol 1 p n A 44 / Sl no 49)
Tipper 10 m3 for dispose the unwanted debries Loading SR23 24, (Vol 1 p n A 47 / Sl no 121)
Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls and coloumns/beams with necessary aluminium frame works at required level mad...
Construction of dry lean cement concrete Sub base over a prepared sub grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ra...
Vaccum de watering with vaccum pump and suction mat and compaction with skin floater clubbed with floating disc including cost of. generator, HOM of machinery, Screed Vibratory, Power Floater, blade a...
Providing and laying Reinforced Cement Concrete pipe light dutyNP2 for culverts, roadway utilities and crossingsas per IS 458:2003in Single row including pointing ends and fixing collars withcement mo...
Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 5...
Providing and fixing in position 25mm dia dowel bars precoated with anticorrosive epoxy paint of required Dia. 600 mm. Long and at 300 mm. C/C and wherever directed including handling, straightening, ...
Demolishing brick work manually/ by mechanical means including stack ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer in...
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of E...
Engaging Labour for Removing barbed wire fencing and ms angle fixed at cp wall top Etc and stack the same as directed by Engineer incharge (A49/ II Skilled )
Engaging Tipper 10 m3 to dispose the unwanted debries collected at dust bin including loading ,unloading transportation complete (SR 23 24,vol I p A 47 / Sl No 121 )
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works andother parallel works from 0.50m to 3.50 m height....
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works andother parallel works from 0.50m to 3.50 m height....
Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M 25, of size 1000 x 450x50 mm,reinforced with 8 mm dia four nos longitudinal and 9 no...
Earth work excavation by manual means for drains,canaIs, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawi...
Earth work excavation by manual means for drains,canaIs, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawi...
Providing and laying in position Cement Concrete for levelling course forall works in foundation. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes m...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportat...
Providing and constructing load bearing wall with Solid Concrete blocksof size 400x150x200mm having block density more than 1800kg/m3and minimum compressive strength of 4.00 N/mm2 conforming to IS2185...
Providing and laying in position Cement Concrete for levelling course forall works in foundation. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes m...
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of ap...
Constructing brick masonry chamber for underground C.I. inspectionchamber and bends with bricks in cement mortar 1:4 (1 cement : 4coarse sand) C.I. cover with frame (light duty) 455x610 mm internaldim...
laying different gradation of metal in sludge tank including complete as per direction of Engineer incharge 53 mm size metal Vol 1, (A 38/8 )
laying different gradation of metal in sludge tank including complete as per direction of Engineer incharge 40 mm size metal Vol 1, (A 38/8 )
laying different gradation of metal in sludge tank including complete as per direction of Engineer incharge 20 mm size metal Vol 1, (A 38/8 )
laying different gradation of metal in sludge tank including complete as per direction of Engineer incharge 6 mm size metal Vol 1, (A 38/8 )
Painting wood work with Deluxe Multi Surface Paint of required shade.Two coat applied at 0.90L/10 m² over an under coat of primer appliedat0.75 L/10 m² of approved brand and manufacture to give an e...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and laying water proofing treatment to the Roof with PU base single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of C:Bathroom, cold applied P...
security room Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3....
Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) tobrick/stone masonry including rounding off corners wherever requiredsmooth rendering, providing and removing scaffolding, including...
C.I. cover and frame 300x300 mm inside SR 23 24 ,Vol II (P A 16/ 153)
Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels, key trenches, foundation of Buildings and bridges and such simillar works in all kinds of soils, as per ...
Providing and Applying two component, water based food grade epoxy resin coating on inside surface of Potable water tank having anti algae, antifungal, Non toxic, hygiene cum damp proof coating Certif...
Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super ...
Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super ...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other paralle...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other paralle...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other paralle...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other paralle...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other paralle...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other paralle...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer in charge Asbestos cement sheet (SR 2023 ...
Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking to the appro priate disposal area as per direction of Engineer in charge.(SR 2023 24 ,vol II...
Demolishing R.B. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer in ccharge.(SR ...
Dismantling tile work in floors and roofs laid in cement mortar includ ing stacking material to the appropriate disposal area as per direction of Engineer in charge For thickness of tiles above 25 mm...
Demolishing brick work manually/ by mechanical means including stack ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer in...
Engaging Labour for Removing Doors and Windows ,Ventilaters From Walls Aluminium Partition Etc and stack the same as directed by Engineer incharge (A49/ II Skilled )
Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer in charge(P 187/19.2.1)
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer in charge.(P...
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of E...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...
Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box (BESCOM Vol-V/P-5/2.2.2)
Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box (BESCOM Vol-VI/P-5/2.2.3)
Concealed Conduit System : Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and run...
25mm dia 2mm thick(BESCOMVol-VI/P-2/1.2.2)
Open Conduit System :Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted ...
Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...
do. 4-5Way(BESCOM Vol-VI/P-8/3.3.3)
do. 6Way(BESCOM Vol-VI/P-8/3.3.4)
do. 10-12Way(BESCOM Vol-VII/P-8/3.3.6)
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
do. 4-5Way(BESCOM Vol-VI/P-8/3.4.3)
do. 6Way(BESCOM Vol-VI/P-8/3.4.4)
do. 8Way(BESCOM Vol-VI/P-8/3.4.5)
do. 10-12Way (BESCOM Vol-VI/P-8/3.4.6)
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
do. 4 Module (BESCOM Vol-VI/P-8/3.5.3)
Do- 8 Module(BESCOM Vol-VI/P-8/3.5.5)
Do- 10-12 Module (BESCOM Vol-VI/P-8/3.5.6)
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch(BESCOM Vol-VI/P-9/3.6.1 )
Do- 6Amps 3way socket (BESCOM Vol-VI/P-9/3.6.3)
Do- Stepped Fan Regulator. (BESCOM Vol-VI/P-9/3.6.4)
Do-16Amps one way switch (BESCOM Vol-VI/P-9/3.6.7)
Do- 6Amps Bell push(BESCOM Vol-VI/P-9/3.6.8)
Do- 32Amps DP switch (BESCOM Vol-VI/P-9/3.6.9)
Do- 6/16Amps universal socket (BESCOM Vol-VI/P-9/3.6.10)
Do- TV/Telephone socket (BESCOM Vol-VI/P-9/3.6.11)
Do-RJ45/I.O.outlet Cat-6 (BESCOM Vol-VI/P-9/3.6.12)
Supplying PVC/GI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using...
Do- 32mm(BESCOM Vol-VI/P-3/1.9.3)
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Do-2.5 sqmm(BESCOM Vol-VI/P-5/2.3.3)
Do- 4 sqmm (BESCOM Vol-VI/P-5/2.3.4)
Do- 6 sqmm(BESCOM Vol-VI/P-5/2.3.5)
Do- 10 sqmm(BESCOM Vol-VI/P-6/2.3.6)
Do- 16 sqmm(BESCOM Vol-VI/P-6/2.3.7)
Supplying and drawing UTP-CAT 6E LAN cable.(BESCOM Vol-VI/P-36/8.1)
Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc , and fixing on existing wooden or metal box using N.F. screws.(BESCOM Vol-VI/P-9/3.8)
Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70 lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Pow...
Do-LED light fitting 1 x 4' - 36/40 W (BESCOM Vol-VI/P-43/11.3.3)
Supply of LED Streetlight luminaire with pressure die cast aluminium housing
body for optimal thermal dissipation. Lamp compartment comprising of anti
glare clear diffuser with Injection moulded polyc...
Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded luminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degr...
Do-LED modular down light 1'x4' 34-36W(BESCOM Vol-VI/P-45/11.6.5 )
Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mmains connector & has...
Do-LED square or round down light 10-12W (BESCOM Vol-VI/P-45/11.5.2 )
Supply of LED floodlight luminaire with pressure die cast aluminium housing
body for optimal thermal dissipation. Lamp compartment comprising of anti
glare clear diffuser with Injection moulded polyca...
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto...
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete 15" Sweep (450 mm) (BESCOM Vol-VI/P-30/6.2.2)
Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply.(BESCOM Vol-VI/P-230/6.2.1)
Fixing all types and all capacities fluorescent / CFL / false ceiling fixtures indoor on the wall / ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required nos of round...
Supplying and fixing 32mm dia class A GI pipe bracket upto 2.7 meters long for fixing MV/SV/MH/FTL street light fitting of all capacities on wall using suitable clamps, bolts and nuts and wiring using...
Fixing a ceiling / wall mounting fan of all capacities and all types to the existing S hook together with supplying and fixing a 5 ampers ceiling rose, necessary length of 23/0.0076 inch PVC insulated...
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5Amps ceiling rose with sufficient length of 23/0.0076inch PVC insulated twin core wire of approved make. (BESCOM...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
6-32Amps DP (BESCOM Vol-VI/P-17/5.18.4)
40Amps DP(BESCOM Vol-VI/P-17/5.18.5)
6-32Amps TPN(BESCOM Vol-VI/P-17/5.18.7)
40 Amps TPN((BESCOM Vol-VI/P-17/5.18.8)
Supplying and fixing regular MCB distribution boards on wall/wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 ...
Do- 8Way SP &N(BESCOM Vol-VI/P-18/5.19.8)
Do- 12Way SP &N(BESCOM Vol-VI/P-18/5.19.9)
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Do- 125Amps 25kA.(BESCOM Vol-VI/P-17/5.15.2)
Do- 200Amps 36kA.(BESCOM Vol-VI/P-17/5.15.6)
Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. (BESCOM Vol-VI/P-19/5.34)
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. (BESCOM Vol-VI/P-19/5.38)
Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machineries like induction motor.(BESCOM Vo...
Supplying, fixing and wiring Automatic Power Factor controller circuit unit fully, static units controlled by 14 stage microprocessor operation, relays LED display, self programming function for power...
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with ...
Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...
Do-50x50x6mm (BESCOM Vol-VI/P-20/5.41.2)
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit . The pit shou...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed ...
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip (BESCOM Vol-VI/P-54/12.58.2)
Do- 600x600x3mm Copper plate(BESCOM Vol-VI/P-54/12.58.11)
1.1 kV, XLPE or Heat resistant PVC
insulated, PVC exutruted Inner Seath
Armoured LTUG Cable as per IS-1554 (Part-
1) or IS-7098 Part-1, Armouring strip
thickness and resistivity as per IS-3975 16 Sqmm...
Do- 25 Sqmm, 4 Core, (13 GI Strips - 4 x 0.8 mm) (BESCOM Vol-VI/32.08)
Do- 50 Sqmm, 4 Core, (17 GI Strips - 4 x 0.8 mm) (BESCOM Vol-VI/32.12)
Do-120 Sqmm, 3.5 Core, (23 GI Strips - 4 x 0.8 mm) (BESCOM Vol-VI/32.15)
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm(BESCOM/Vol-VI/ 21.05 )
Do- 35 to 95 Sqmm(BESCOM /Vol-VI/ 31.06)
Providing and laying in position 100mm dia stone ware pipe in existing trench.((6.8) (As per 2019-20 PWD Ele SR)
Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgi...
Supplying & Fixing of Patch panel for LAN cabling 24 Port 10/100/1000 patch panel(BESCOM Vol-V/P37/8.12.5 )
Supplying & Fixing of …mtrs Cat6 Patch Cable. 1mtr (BESCOM Vol-V/P37/8.11.1 )
Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-20003Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary amm...
Do-3.00 HP - 300 LPM @ 26 m = 5 STG Outlet Dia - 2.50"(PWD PArt-V/P-152/13.11.1 )
Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includi...
Supplying, installation, testing and commissioning of solar hot water heater comprising of solar Flat Plate Collector (FPC) of size 2120x1040x100mm and stainless steel hot water storage tank with stai...
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...
D0- 6 to 15 HP pumps (PWD SR /Vol-VI/p-155/13.23.3 )
Labour charges for Erection, Electrification and ommissioning of Pumpsets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps...
11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar,Modem & 2 No of Meters for 3 Phase 4 Wire Metering ...
Load Break Switch with Panel (PWD Vol-VI/P-17/41.01 )
Erection of HT metering Cubicle on Platform. (PWD Vol-VI/P-47/9.01 )
Distribution Transformer - 3 Phase,11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014 B. CABLE ENTRY TYPE 100 kVA, Aluminium Wdg, Star 2 (5 Star) (BESCOMVol-VI/P-7/12.16)
11 kV, 200 Amps Single Break GOS (Dwg No. BESCOM/GM/QS&S/23 Dtd 24.11.2018)
(BESCOM Vol-VI/P11/ 24.01)
Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wir...
Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries 60 /65 AH capacity.(BESCOM Part-VI/P29/9.5.5)
Fabrication, Supplying, Erection, Testing and Commissioning of ...... ms long Polygon high mast with Single/Multiple telescopic sections having, (minimumoverlap distance of 1.5 times of top section) t...
Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycar...
ETP Motors Supplying of Three phase 2HP Submersible Raw water Sewage /mud pumpsets 5M3/hr capacity & 7.5 mtr Head pump sets. CI. (NWKRTC Approved Rates)
Supplying of Three phase 2HP SubmersibleFilter Feed pump sets 5M3/hr capacity & 15 mtr Head pump sets.CI. (NWKRTC Approved Rates)
Supplying of Three phase 2HP Submersible Aerator pump sets 15M3/hr Air capacity .CI.
(NWKRTC Approved Rates)
Supplying, Installation and Commissioning of Dual Media Filter with multi port valve & Required media. (NWKRTC Approved Rates)
Supplying,&fixing of DANGER BOARD madeout of MS Sheet metal with two coats of non corrossive enamel Paint(PWD Ele SR 2010-11 SRP 66/12)
Supplying and installation of RUBBER MAT 1mtr x 1mtr -1Omm thick. complete including cost of materials, labour, usage charges of machinerycomplete as per specifications. SR- 2023-24 Chapter-15 P-3...
Supplying push button operated direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorros...
Panel board units with all necessary materials and labour tools and equipments including cement concrete for foundation bed etc complete asper specification with testing of as per instructions of eng...
ACTVATED SAND FILTERS :Providing and fixing of 0.8 m dia pressure sand filter comprising of 5 mm thick 0.8 m dia shell joined with 10 mm thick M S flanges and Air vent pipe with gate value graded filt...
BELT SKIMMER : Providing and fixing of BELT SKIMMER with 5 LPH tray with complete arrangement for skimming out oil etc complete ---- including all lead and lifts as per the direction of engineer in ch...
Pressure Sand Filter: Providing and fixing of 0.8m dia pressure sand filter comprisig of 5mm thick 0.8 mm dia shell joined sand with gate valve graded filter media comprising of sand pebbles grit etc ...
Dozing Pumps with tanks providing fixing of poly electrode dozing tnaks comprising of 100 litres capacity LDPE tank with electronic metering pump complete.. KSRTC Approved rate
Pre-flter of PVC material with a height of 500mm and 300mm dia with 10mm perforated holes and bifurcated with ss sheets(3mm thickness) of 8mm holes MS handle and base(PWD Vol-v/p-263/22.2)
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 3 mm GI strip SR-2023-24 P-53/12.58.2
GI/Copper strips for grounding connections, using necessary fixing materials as required. 600 x 600 x 3 mm Copper plate SR-2023-24 P-53-54/12.58.11
Supplying and running Copper conductor for gorunding and(along with other wires in conduit system of wiring)Using necessary suitable size clamps,nails, guttas/spacers etc, 8SWG Copper wire(Ele SR 2019...
Oil skimmer Grey water is connected to oil skimmer with 1 HP motor.Capacity tank of 1200mmx1200mmx2200mm(PWD Vol-V/P-263/22.2)
Aeriator Air blower with motor 2 HP and aeration tank diffuser and PVC Pipe line is provided for aeration tank(PWD Vol-V/P-263/22.2
Filter Normal Flow-3500LPH, Filtering Media Graded Pebbles/sand, MOC-MS Height-1265 mm diameter of 450mm, Minimum Pressure 2.0Kgcm2 Maximum pressure 3.5Kg/cm2 Bursting Pressure 10Kg/cm2, Valve Butter...
Open Conduit System:-Supplying heavy gauge PVC conduit pipe 25 mm dia 2 mm thick. mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverte...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. (BESCOM Vol-VI/P-19/5.34)
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. (BESCOM Vol-VI/P-19/5.38)
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with ...
Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit . The pit shou...
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip (BESCOM Vol-VI/P-54/12.58.2)
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip
thickness and resistivity as per IS-3975 16 Sqmm...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm(BESCOM/Vol-VI/ 21.05 )
Supply, erection, testing and commissioning of Fire Fighting panel cubicle type made out of 14/16 Swg MS CRCA sheet which is derusted, degreased, phosphated and passivated with angle iron skeleton or ...
Supply, erection, testing & commissioning of electrical motor driven end suction back pull out centrifugal pump capable of delivering,adequate LPM at required head. when running at 2900 rpm directly c...
Supply, Installation, testing and commisioning electrically driven jockey pump of capacity 180.0 Lpm at required head end suction type bronze impeller pump oupled to electrical driven motor with suita...
Supply, installation, testing and commissioning electrically driven Terrance pump of capacity 900.0 Lpm at 35.0m Head bronze impeller pump coupled to electrical driven motor with suitable HP with all ...
Supply, installation, testing & commissioning of diesel engine driven pump, horizontal mounted, Horizontal spiltcase centrifugal single stage pump, capable of delivering required flow at required head...
Supplying, installing, testing & commissioning approved make heavy duty (Class 'C') GI pipes and fittings confirming to IS 1239 PI & II, Malleable Specials such as tees, long radius bends, check nuts,...
Do-100 mm dia. mm dia. (BESCOM 2023-24 SR Vol-VI/P-91/15.97.4 )
Do-32 mm dia.mm dia. mm dia. (BESCOM 2023-24 SR Vol-VI/P-91/15.97.9 )
Do-25 mm dia. mm dia. (BESCOM 2023-24 SR Vol-VI/P-91/15.97.10 )
Supplying Installing, testing and commissioning of Gun metal AIR
RELEASE VALVE SIZE OF 25mm dia including cost of materials, labour, usage charges of machinery complete as per specifications. Complete...
Supplying, installing , testing and commissioning of PN16 CI butterfly valves of confirming to IS 13039 with necessary nuts & bolts etc., complete ---- etc., complete as per specificaiton with all lea...
FIRE HYDRANT SYSTEM Supplying Installing, testing and commissioning of 63mm mm dia single headed Gun mental Hydrant Valve with flanged inlet, stop valve, spindle and cast iron hand wheel. It has a fem...
Supplying Installing, testing and commissioning of hydraulically operated sprinkler Gong Valve with water meter gong bell and trims as required, pressure gauges drain Valve, ball Valves check valve, s...
Supplying Installing, testing and commissioning of Reinforced Rubber Lined 2nos .RRL Fire hose of 63mm dia 15m length as per IS 8423 bindedwith one set of male and Female lnstantainious Gun metal coup...
Supplying Installing, testing and commissioning of Gun metal Branch pipe size of 63mm dia x19mm dia as per IS 903 complete including cost of materials, labour, usage charges of machinery complete as p...
Supplying Installing, testing and commissioning of Hose cabinet made out of 18 gauge M.S.sheet with double glass door with lacing arrangement and painted with two coats of Fire red Enamel paint at out...
Supplying Installing, testing and commissioning of 19mm dia 40.0m length hose with rubber lining smooth bore, reinforced of natural/synthetic fibres, a rubber cover finish shall be smooth, fluted or f...
Wraping and Galing of U/G pipe line work includes one coat of anticorrossion paint (Black) and two coats of Bituminous cloth. including cost of materials, labour, usage charges of machinery complete a...
Do-100 mm dia. (BESCOM 2023-24 SR Vol-VI/P-91/15.98.3 )
Supplying Installing of Horizantal side wall Type ,Standard Response
Standard Coverage, Sprinkler, K5.6(80),1/2”NPT, 68 Degree C, Chrome finish, UL listed.(BESCOM 2023-24 SR Vol-VI/P-90/15.94 )
Supplying installing, testing and commissioning of PN16 CI "Non Return Valve " confirming to IS 13039 with necessary bolts and nuts etc complete includes cost of all materials labour charges with all ...
Supply and installing testing and commissioning of CI " Y " stainer
confirming to IS standard with necessary bolts and nuts complete includes cost of all materials labour charges with all lead lift lo...
Pressure Switch including Isolation Valve and forged siphon Tube including with all accssories as per IS:Spec. ---- etc., complete as per specificaiton with all lead and lift, loading unloading, labou...
Analogue Addressable 1 to 4 loop Fire Alarm Control Panel expandable via plug-in loop driver boards, loop current 500mA maximum per loop, dual flash based microprocessor, supports to connect 240 addre...
Supply, installation in position, testing and commissioning of Addressable Optical Smoke Detector radio-linked optical detector (smoke) operates with an optical sensing chamber based on the principle ...
Supply, installation, testing and commissioning of RF translator wireless device which can control up to 32 detectors modules or signaling devices, configuration through manual or PC software, up to 3...
Supply, installation in position, testing and commissioning of RF
expander wireless device, two orthogonal antennas for safe radio
communications, operating at frequency range of 865 MHz, 7 bi-directi...
Supply, installation, testing and commissioning of Addressable Wireless Conventional Wall Sounder with Beacon for providing Audible and Visual Alarms in response to the output signal from the control ...
Supply, installation in position, testing and commissioning of Addressable thermal detector (heat) radio-linked optical detector operates with a rate of rise thermal sensor. The detector communicates ...
Supplying Installing, testing and commissioning of Resettable type Manual Call point . works on 24V DC LED indicator with glass Fronted. Fire Symbol .The red Manual Call Point is approved to EN54-11 s...
Supplying of four bucket stand alongwith buckets. Complete(BESCOM 2023-24 SR Vol-VI/P-93/15.111 )
Supplying of first aid box. complete (BESCOM 2023-24 SR Vol-VI/P-93/15.114 )
Supplying of FIRST AID CHART with lamination. Complete(BESCOM 2023-24 SR Vol-VI/P-93/15.116 )
Providing's Escape Singage Photoluminescent rigid plastic, 2 mm thickness, Printed on High Quality glass paint with UV resistance, 5 years warranty, Material Used Non Radiocactive, non-phosphorous, no...
Supply and installation of 9kg Fire Extinguisher Mono Ammonium Phos phate Powder 90, Stored Pressure Type, Pressure Gauge, Gross Weight 14.9 Kg, empty weight 5.90 Kg, Can Height 615MM, Diameter 175M M...
Supply and installation of 4.5Kg C02 gas valve type Fire Extinugisher, Tro lley Mounted, Easy Weight Management used Unused Mechanism, Gross Weight 19.1 Kg. empty Weight 14.6 Kg. Can Height 860MM Diam...
Supply and installation of 9 Ltr Water type Fire Extinugisher, Stored
Pressure Type, Pressur Gauge, Gross Weight 15.1kg. empty weight 6.1kg Can Height 615MM, Diameter 175 MM, Discharge Time less than
Providing 22.5Kg C02 Gas Type Fire Extinugisher, Trolley Mounted, Easy Weight Management used Unused Mechanism, Gross Weight 93.5 Kg.empty Weight 71.0Kg.Can Height 1333M M Diameter 232MM, Discharge Ti...
Open Conduit System :Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted ...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Do-2.5 sqmm(BESCOM Part-III/P-5/2.3.3)
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5 ...
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5 ...
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5 ...
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5 ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
annexure A.doc
Others - Letter of Credit-Annexure-A • 0.03 MB
Annexure B.doc
Others - Bid Capacity-Annexure-B • 0.03 MB
Tender notification Tumakur EV.pdf
Others - Tender Notification • 0.28 MB
Bid Document.pdf
Others - Bid Document • 0.52 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].