Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹97.9 LAccepted-AOC | L-1 | Accepted-AOC Work has been awarded to lowest Contractor. Hence, EMD may be released. | |
| 2 | L-2₹1.2 Cr+₹21.1 L (21.5%)Rejected-Finance | L-2 | Rejected-Finance Due to L-2, hence EMD may be released |
Tender Value
₹99.7 L
EMD Value
₹2 L
Closing Date
31 Oct 2023, 5:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Executive Engineer, Kalpa Division, HPPWD Kalpa
C/O Assistant Engineer office-Cum- Residence at Moorang in Distt. Kinnaur (HP) (SH- Building portion, WS and SI and rain water harvesting system
2023_PWD_80437_1
PW-KNR-E-Tender/23-5486-95 dt. 10-10-2023
Open Tender
Civil Works - Buildings
Item Rate
730 days
Moorang
Please refer Tender documents.
8 documents required · 8 mandatory
₹2,000
₹2 L
23 Apr 2024
19 Oct 2023
1 Nov 2023
19 Oct 2023
31 Oct 2023
19 Oct 2023
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas all depth and all width , including getting out and disposal of excavated earth upto all leads and lifts, as directed by Engineer-in-charge. All kinds of soil, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing form work with steel plates 3.15mm (three point fifteen milimeter) thick welded with angle iron in frame 30x30x30x5 mm ( thirty into thirty into thirty into five milimeter) so as to give a fair finish including centering, shuttering, strutting and propping etc. wooden battens and ballies, height of propping the same for insitu-reinforced concrete & plain concrete work as per the direction of Engineer-in-charge, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Foundations, footings, bases of columns etc. and mass concrete.
Flat surface such as soffits of Suspended floors, roofs, landings, balconies and access platform
Lintels, beams, plinth beams, girders, bressumers and cantilevers
Columns, Pillars, Piers, abutments, pillars, posts and struts.
Stairs, (excluding landings) except spiral staircases
Edges of slabs and break in floor and walls.
Verticle surface such as Walls (any thickness) partitions and like including attached pilasters, butteresses, plinth and string courses etc.
Providing and laying damp-proof course 40mm (forty milimeter) thick with cement concrete 1:2:4 (one cement : two coarse sand) : four graded stone aggregate 12.5 mm (twelve point five milimeter) nominal size, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg (kilogram) per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene cleaning oil, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge
Providing and laying cement concrete 1:6:12 (One cement : six sand : twelve graded stone aggregate 40 mm (Forty millimeter) nominal size) mechanically mix by concrete mixer and curing complete excluding cost of centering and shuttering in: Foundation and plinth, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and laying cement concrete 1:4:8 (One cement : four sand : eight graded stone aggregate 40 mm (Forty millimeter) nominal size) mechanically mix by concrete mixer and curing complete excluding cost of centering and shuttering in: Foundation and plinth, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and laying cement concrete work 1:1.5:3 (one cement : one point five coarse sand : three graded stone) aggregate 20 mm (twenty millimeter) nominal size mechanically mix by concrete mixer and compacting with vibrator and curing complete excluding cost of form work and reinforcement for reinforced concrete work. All work upto plinth level, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
Providing and laying upto all floor levels cement concrete work 1:1.5:3 (one cement : one point five coarse sand : three graded stone) aggregate 20 mm (twenty millimeter) nominal size to give even surface including centering and shuttring but excluding cost of reinforcement for reinforced concrete work and curing complete, mechanicaly mixed and vibrated for compacting upto all floor level : Moulding as in cornices, window sills etc. , String cources, copies, bed plates, anchor blocks, plain window sills and the like, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- - All work up to plinth level 1:2:4 (one cement : two coarse sand : four graded stone) aggregate 20 mm (twenty millimeter nominal size), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to all level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (one cement : one point five coarse sand : three graded stone) aggregate 20 mm (twenty millimeter) nominal size, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (One cement : one point five coarse sand) : three graded stone aggregate 20 mm (twenty milimeter nominal size), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cintent ae per approved design meix, including pumping of concrete to site of laying but excluding the cost of centring, shuttring, finishing and reinforcement, including admixtures in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per deirection of engineer-in- charge, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
All works upto plinth level
All works above plinth level upto floor V level
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Applying cement slurry on R.C.C. slab or cement concrete work using 2.75 KG (two point seven five kilogram) of cement per square meter of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing Smooth finishing of the exposed surface of R.C.C. work with 6mm (six millimeter) thick cement mortar 1:3 (one cement : three fine sand ), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and laying water proofing treatment with Dr. Fixit-FASTFLEX or equivalent with two components polymer modified cemnetitious coating consisting of cementitious powder and a polymer liquid in two coats for first coat:-clean and saturate surface and then applying a coat of Dr. Fixit-FASTFLEX by maintaning a coverages of 6-7 sft (six to seven sqaure feet) per Kilogram to achieve one mm(mollimeter) thickness and the same process shallteneded upto 300mm (three hundred millimeter) vertically. The second coat shall be applied in opposit direction after four six-hours of application of first coat then sprinkle sand on top surface of applied Dr. Fixit-FASTFLEX while still tacky over the second coat. Then aplly cement mortar 1:4(one ciment: four sand) admixed with 200ml(two hundred mollimeter) of pidiproof LW @ 200ml(two hundred millimeter) per 50 (fifty) kilogram bag of cement oevr the floor with suitable gradiant towards drain pipe, while the second coat of Dr. Fixit is still tacky complete upto all floor levels, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth level up to floor in :Cement mortar 1:6 (one cement : six coarse sand), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : cement mortar 1:6 (one cement : six coarse sand) : including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth levels in Cement mortar 1:4 (one cement :four coarse sand), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in superstructure above plinth level up to floor V level. Cement mortar 1:4 (one cement : four coarse sand), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Square rubble masonry coursed with hard stone of approved quality in foundation and plinth in walls with Cement mortar 1:4 (one cement : four sand) including raking out joints, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Boulder filling tightly hand packed under floors, , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second Class Deodar wood complete upto all floor level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including .
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid separately, all complete(Note:- Butt hinges and necessary screws shall be paid separately) 2nd class Deodar wood 40 mm(fourty millimeter) thick shuters, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm (four milimeter) thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws: 40 mm (fourty milimeter) thick, Second Class Deodar wood, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows(Area of opening for panel inserts excluding portion inside grooves or rebates to be measured).Panelling or panelled or panelled and glazed shutters for25mm(twenty five millimeter) to 40 mm(fourty millimeter) thick : Prelaminated particle board 12mm(twelve millimeter) thick with decorative lamination on both sides, Grade I, Type II,IS:12823 marked, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm (one point four millimeter) in both directions with wire of dia 0.63 mm (zero point sixty three millimeter), for doors, windows and clerestory windows with ISI marked stainless steel but hinges of required size and necessary screws :40mm (fourty millmeter) thick Second class deodar wood, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing 19mm (Nineteen millimeter) thick commercial board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc. complete), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing and fixing 19mm (Nineteen millimeter) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing and fixing ply wood lining with butt jointing and nails (frame work and cove fillets to be measured and paid for separately) 6 mm (six milimeter) thick, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1 mm (one millimeter) thick, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing square edges lipping/cover fillets (beading) 19mmx6mm (ninteen milimeter into six milimeter) section including mitring at junctions with wood screws and nails complete. 1st class deodar wood, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing 40x5 mm (forty into five milimeter) flat iron hold fast 40 cm long including fixing to frame with 10 mm (ten milimeter) diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm (thirty into ten into fifteen centimeter) 1:3:6 mix (one cement : three coarse sand : six graded stone aggregate 20mm (twenty milimeter) nominal size), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete, Fixed to openings/ wooden frames with rawl plugs screws etc. , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing powder coated aluminium sliding door bolts, ISI marked, transparent or dyed to required colour or shade, with nuts and screws etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
300x16 mm (Three hundred into sixteen millimeter)
250x16 mm (two hundred fifty into sixteen millineter)
Providing and fixing powder coated aluminium tower bolts(Berrel types), ISI marked, transparent or dyed to required colour or shade, with necessary screws etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
250×10mm (two hundred fifty into ten millimeter)
200×10 mm(two hundred into ten millimeter)
150×10mm (one hundred fifty into ten millimeter)
100×10mm (one hundred into ten millimeter)
Providing and fixing powder coated aluminium handles, ISI marked, transparent or dyed to required colour or shade, with necessary screws etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
125 mm(one hundred twenty five millimeter)
100 mm(one hundred millimeter)
75mm(seventy five millimeter)
Providing and fixing powder coated aluminium hanging floor door stopper, ISI marked transparent or dyed to required colour or shade, with necessary screws etc. complete to suit shutter thickness complete (twin rubber stopper), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35kg (thirty five kilogram and door width from 700mm(seven hundred millimeter), with necessary accessories and screws etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing 115 mm(one hundered fifteen millimeter) bright finished brass hasps and stapples (safety type) with necessary screws etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Double strip (horizontal type), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing 65х35mm (sixety five into thirty five millimeter) special quality bright finished brass cupboard or ward robe locks with four lever of approved quality including necessary screws etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing aluminium hooks and eyes. 200 mm(two hundred millimeter), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
Providing and fixing chromium plated brass 50 mm (fifty millimeter) cupboard or ward robe knobs with nuts complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
Providing and fixing M.S. single acting spring hinges bright finished with necessary screws etc. complete : 150 mm (two hundred fifty milimeter), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
Providing and fixing M.S. double acting spring hinges bright finished with necessary screws etc. complete : 150 mm (two hundred fifty milimeter), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
Providing and fixing brass 100mm(one hundred milimeter) mortice latch and lock with 6 levers without pair of handles(best make of approved quality) for alumunium doors including necessary cutting and making good etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing curtain rods of 1.25 mm (one point twenty five milimeter) thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc. wherever necessary complete . 20 mm (twenty five milimeter) diameter, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
Providing and fixing 75x65 mm (seventy five into sixty five milimeter) Deodar wood handrail in straight length including moulding or sunk to receive iron core complete,, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
Providing & Fixing all weather proof ACP imported sign panel all weather proof multi colour computrised reflective digital panel 3mm(three millimeter) thick, mounted on powder coated G.I. frme work fixed/hanging with wall or ceiling etc. with specified clamps and G.I. wires and rawl plugs etc., including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
Providing and laying Precast terrazzo tiles hydraulic compressed and polished 20 mm (twenty milimeter) thick IS marked No. IS: 1237 of approved shade in floor, treads of steps and landings on a bed of 25mm (twenty five millimeter) average thickness of cement mortar 1:6 (one cement: six sand) in the ratio of 50% white 50% grey cement jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required)including rubbing and polishing complete with tiles of Medium shade, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and laying Precast terrazzo tiles hydraulic compressed and polished 20 mm (twenty milimeter) thick IS marked No. IS: 1237 of approved shade in skirting, risers of steps on 10mm (ten millimeter) average thickness of cement plaster 1:3 (one cement: three sand) in the ratio of 50% white 50% grey cement jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required)including rubbing and polishing complete with tiles of Medium shade, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing polished 20mm (twenty milimeter) thick Kota stone slabs of size 55x55 cm (fifty five into fifty five centimeter)in rises of steps, skirting, dado and pillars laid on 12 mm (twelve milimeter ) averge thick cement mortar 1:3 (one cement: three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, inclusding rubbing and polishing complete , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing Jaiselmer yellow marble bands 7.5 cm (seven point five milimeter) wide 20mm (twenty milimeter) thick base of cement mortar 1:4 (one cement : four sand), including jointed with grey cemetn slurry mixed with pigment to match the shade of stone rubbing and polishing complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (three hundred into three hundred millimeter) (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty millimeter) thick cement mortar 1:4 (One Cement : four Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm (three point three kilograme/square meter including pointing the joints with white cement and matching pigment etc., complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing and laying Precast chequered terrazzo tiles with nosing hydraulically compressed and polished 20 mm (twenty milimeter) thick IS marked No. IS: 1237 of approved shade in floor, treads of steps and landing on a bed of 25mm (twenty five millimeter) average thickness of cement plaster 1:6 (one cement: six sand) in the ratio of 50% white 50% grey cement jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete with tiles of Medium shade, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing 20 mm (twenty millimeter) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm (twenty millimeter) thick base cement mortar 1:4 (one cement : fou rcoarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Baroda green marble, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Extra for fixing marble/granite stone, over and above corresponding basic item, in facia and drops of width upto 150mm(onehundred fifty millimter) with epoxy resin based adhesive, including cleaning etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Extra if terrazo tiles are laid in treads of steps not exceeding 30cm (thirty centimeter) in width, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing 1st quality white/coloured glazed wall tiles 30х 45 cm(thirty into fourty five centmeter) conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm (twelve millimeter) thick bed of cement Mortar 1:3 (One cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg (three point three killograme) per sqm (square meter) including pointing in white cement mixed with pigment of matching shade complete,including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Extra for pre-finished nosing in treads of steps of Kota stone/ sand stone slab/teraazo tiles, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and laying heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M50 grade including border or kurb block grey or coloured over sub-base of concrete with 25mm (twenty milimeter) thick average thickness of cement mortar 1:4 (One cement : four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing & polishing complete (Sub base concrete floor to be paid for 60mm (fsixety milimeter) thick inter locking block, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
Providing and fixing 0.60mm (zero point sixty milimeter) thick prepainted steel sheet of TATA Duration in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with G.I. self drilling screw of required sizes/prepainted iron J or L hooks, bolts and nuts 6mm (six millimeter) dia metre with prepainted limpet and rubber washers complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge .
Providing and fixing ridges or hips 60 cm (sixty centimeter) overall with 0.45mm ( zero point forty five milimeter) thick pre-painted steel sheets of TATA DURASHINE in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with G.I. self drilling screw of required sizes/ pre-painted iron J or L hooks, bolts & nuts 6mm (six milimeter) dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge, complete upto floor all level, including entire carriage of materials through all modes of transportation with in all leads and lifts and as per drawing and technical specifications and as per direction of the Engineer-in-charge.
Providing and fixing valley 90 cm (nintey centimeter) overall 0.45mm (zero point five milimeter) thick prepainted steel sheet of TATA Durashine in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with G.I. self drilling screw of required sizes/prepainted iron J or L hooks, bolts and nuts 6mm dia (six milimeter diameter) with prepainted G.I. limpet and bitumen washers complete upto floor all level, including entire carriage of materials through all modes of transportation with in all leads and lifts and as per drawing and technical specifications and as per direction of the Engineer-in-charge.
Providing and fixing flashing 38 cm (thirty eight centimeter) overall with 0.45mm(zero pont four five millimeter) thick pre-painted steel sheets of TATA DURASHINE in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes/prepainted iron J or L hooks, bolts & nuts 6mm dia meter & prepainted G.I. limpet and bitumen washers complete with all accessories as required, 0.60 mm(zero pont six zero millimeter) thick sheet, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing 30 cm(thirty centimeter) wide, 120 cm(one hundred twenty centimeter) overall box type gutter with 0.45mm (zero point forty five milimeter)thick plain prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of black coat of polyster 5 microns over 5 microns primer coating with iron brackets 40x3mm(fourty into three millimeter) size bolts, nuts and washers etc., including making necessary connections with rain water pipes complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing on wall face PVC 150mm(one hundred fifty millimeter) dia. rain water pipes of working pressure not less than 4.5 (four point five) kilogram per square meter including filling the joints with approved adhesives compltete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing on wall faces PVC accessories for rain water pipes including filling the joints with approved adhesive complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
150mm (one hundred fifety millimeter) PVC door bend
150mm (one hundred fifety millimeter) PVC plain bend
150mm (one hundred fifety millimeter) plain shoe
Providing and fixing M.S. holder bat clamps of approved design to PVC pipes embeded in and including cement concrete blocks 10 x10x10 cm (ten into ten into ten centimeter) of 1:2:4:mix (one cement two sand four graded stone aggregate 20 mm(twenty millimeter) nominal size) and cost of cutting holes and making good the wall etc. , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
Providing and fixing M.S. BP Sheet 2mm (two millimeter) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Structural steel work including hollow section riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete,in truss and trussed purlins in buildings and in beams joists channels, angles, tee flats with connecting plates or aangle cleats as in main and cross beams hip and jack rafters, purlins connected to commomn rafters and the like, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
Supplying and fixing 300х300 mm (three hundred into three hundred milimeter) cast iron cover with frmae for gully trap complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Supplying and fixing 455х610 mm (four hundred fifty five into six hundred ten milimeter) rectangular precast c.con cover with frmae of NTC make or equivalent complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required: In gratings, frames, guard bar, ladder, railings, brackets, ornamental, brackets decorative MS screen gates and similar works, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm(twenty into ten into two millimeter) and braced with flat iron diagonals 20x5 mm(twenty into five millimeter) size, with top and bottom rail of T-iron 40x40x6 mm(fourty into fourty into six millimeter), with 40 mm(fourty millimeter) dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing M.S. hollow pipe in vertical posts 100mm (one hundred millimeter) dia. welded in straight length over M.S. flat top of vertical balusters including one coat of red oxide priming coat complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer: M.S. Tube, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm(zero point nine zero litre per ten square meter) over an under coat of primer applied @ 0.80 ltr/ 10 sqm(zero point eight zero litre per ten square meter) of approved brand and manufacture, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting complete with ready mixed pink or grey primer of brand and manufacture on wood work(hard and soft wood), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm(zero point nine zero litre per ten square meter) over an under coat of primer applied @0.75 ltr/10 sqm(zero point seven five litre per ten square meter) of approved brand and manufacture, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm (thirty centimeter)in girth and finished even and smooth, Cement Mortar 1:4 (One Cement : Four sand), including carriage of materials through all modes of ransportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge
6 mm(six millimeter) cement plaster to ceiling of mix 1:3 (one cement : three fine sand), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto all floor level including arrises,internal rounded angles, chamfers and/or rounded angles not exceeding 30cm (thirty centimeter) in girth and finished even andsand opapered smooth. Cement Mortar 1:6 (One Cement : Six coarse sand), including carriage of materials through all modes of ransportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge
15mm Cement plaster in single coat as pattern shown in elevation of Arch Drg No. 203/1 of Job No. 3303 on the fair side of brick/ concrete/stone walls for interior plastering upto all floor level including arrises,internal rounded angles, chamfers and/or rounded angles not exceeding 30cm (thirty centimeter) in girth and finished even and sand opapered smooth. Cement Mortar 1:6 (One Cement : Six coarse sand), including carriage of materials through all modes of ransportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge
15mm Cement plaster in single coat on the fair side of brick/ concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm (thirty centimeter) in girth and finished even andsand opapered smooth. Cement Mortar 1:6 (One Cement : Six coarse sand), including carriage of materials through all modes of ransportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge
Distempering two or more coats on undecorated ceiling with 1st quality acrylic distemper, having VOC ( Volatile Organic Compound) content less than 50 grams/litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Finishing walls with Acrylic Smooth exterior paint of required shade, brand and manufacture for interior grade on undecorated on concrete/stone/plastered wall surface to give even shade including thouroughly brushing the surface to free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required metling the surface: New work (Two or more coat applied @ 1.67 ltr/10 sqm (one point sixty seven litter/ten square meter) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm (two poin twenty killograme/ten square meter), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Distempering two or more coats on undecorated wall with 1st quality acrylic distemper, having VOC ( Volatile Organic Compound) content less than 50 grams/litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and applying white cement based putty of average thickness 1 mm(one millimeter), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
15mm(fifteen millimeter) nominal bore
20mm(twenty millimeter) nominal bore
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. concealed pipes, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
15mm(fifteen millimeter) niminal bore
20mm(twenty millimeter) niminal bore
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm (twenty five into forty millimeter) nominal bore, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately), 20mm nomonal bore, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement of various capicity and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank, 10000 (ten thousand) litres net capacity tank, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Constructing masonry Chamber 30x30x50cm(thirty into thirty into fifty centimeter) inside in brick work in cement mortar 1:4 (one cement : four coarse sand) for stop cock, with C.I. surface box 100x100х75 mm(one hundred into one hundred into seventy five millimeter)(inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20 mm(twenty millimetre) nominal size), including necessary excavtion, foundation concrete 1:5:10(one cement: five fine sand: ten graded stone aggregtae 40mm(fourty millimeter) nominal size) and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12 mm(twelve millimeter) thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing Polyethelene-Aluminum-Polyethelene(PE-AL-PE)Composite pressure pipes U.V. stabilized with carbon black conforming to IS-15450-2004 for hot and cold water supply capable to with stand temprature stability upto 80⁰ C, including all special fittings of composite material(engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors :Internal work-Exposed on wall, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
1216 (16mm (Sixteen millimeter) O.D. pipe)
1620 (20mm (Twenty millimeter) O.D. Pipe)
Providing and fixing polythene aluminum polythene(PE-AL-PE)composite pressure pipe U.V. stabilized with carbon black conforming to IS-15450-2004 for hot and cold water supply capable to withstand temprature stability upto 80⁰C, including all special fittings of composite material(engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc. with clamps at 1.00 metre spacing. This includes the cost of cutting chases and including testing of joints complete as per dirction of engineer-in-charge: Concealed work, including cutting chases and making good the wall etc.,including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
1216 (16mm (Sixteen millimeter) O.D. pipe)
1620 (20mm (Twenty millimeter) O.D. Pipe)
Providing and fixing polythene aluminum polythene(PE-AL-PE)composite pressure pipe U.V. stabilized with carbon black conforming to IS-15450-2004 for hot and cold water supply capable to withstand temprature stability upto 80⁰ C, including all special fittings of composite material(engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc. , with trenching, refilling and testing of joints complete as per dirction of engineer-in-charge: External work, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
1216 (16mm (Sixteen millimeter) O.D. pipe)
1620 (20mm (Twenty millimeter) O.D. Pipe)
Providing and fixing ISI marked high pressure PVC spigot and socket, waste and ventilating pipes including fixing with approved adhesive etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
150 mm dia.(one hundred fifty millimeter)
110 mm dia.(one hundred ten millimeter)
Providing and fixing ISI marked PVC single equal branch with oval access door, insertion rubber washer 3 mm(three millimeter) thick bolts and nuts complete including fixing with approved adhesive etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
150 mm dia.(one hundred fifty millimeter)
110 mm dia.(one hundred tne millimeter)
Providing and fixing ISI marked PVC door bend with oval access door, insertion rubber washer 3 mm(three millimeter) thick bolts and nuts complete including fixing with approved adhesive etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
150 mm dia.(one hundred fifty millimeter)
110 mm dia.(one hundred tne millimeter)
Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
150 mm dia.(one hundred fifty millimeter)
110 mm dia.(one hundred tne millimeter)
Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
150 mm (One hundred fifty millimeter) diameter
110 mm (One hundred ten millimeter) diameter
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
150 mm (One hundred fifty millimeter) diameter
110 mm (One hundred ten millimeter) diameter
Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
150 mm (One hundred fifty millimeter) diameter
110 mm (One hundred ten millimeter) diameter
Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm x 90 mm(one hundred ten into ninety millimeter), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing PVC cowl, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
150 mm (One hundred fifty millimeter) diameter
110 mm (One hundred ten millimeter) diameter
Providing and fixing PVC reducer ISI marked including jointing with approved adhesive etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
150mm × 110mm (One hundred fifty millimeter into one hundred ten millimeter) diameter
110mm × 90mm (One hundred ten into ninety millimeter) diameter
Providing and fixing PVC 'P' or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan PVC pipe with adhesive etc. complete,110 mm(one hundred ten millimeter) including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
Providing and fixing soil, waste and vent pipes: 100 mm(one hundred millimeter) Sand cast iron iron socket & spigot (S&S) pipe as per IS: 1729, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm (three millimeter) thick, bolts and nuts complete, 100 mm (hundred millimeter) diameter, Sand cast iron S&S as per IS - 1729 including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Cutting chases in stone/brick masonry walls for following diameter and cast iron/centrifugally cast (spun) iron pipes and making good the cement concrete 1:3:6(one cement : three coarse sand : six graded stone aggregate 12.5 mm (twelove point five millimeter) nominal size, including necessary plaster and pointing in cement mortar1:4(one cement : four coarse sand):100mm (one hundred millimeter) dia, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing & fixing White vitreous china water closet squatting pan (Indian type): White Vitreous China Big size Orrissa pan of Hindware No. 20004. of size 580x440 mm (five hundered eighty into four hundred fourty millimeter) with integral type foot rests, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing white vitreous china(European type/Wash down type) water closet pan. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Anglo Indian WC Pan No-20012 of IS No 2556 of Hindware
European type WC pan No 2090(PRIMA) of CERA/HINDWARE
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10(ten) litre capacity - White, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing wash basin with C.I. brackets, 15 mm (fifteen millimeter) C.P. brass pillar taps, 32 mm thirty two millimeter) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:Flate Back, White Vitreous China wash basinof HINDWARE No. 10001 size 550х400mm(five hundred fifty into four hundred millimeter) with a pair of 15 mm (fifteen millimeter) C.P. brass pillar taps, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing Stainless Steel kitchen sink of approved standard as per IS:1022) Size 460х560х229 (four hundred sixty into five hundred sixty into two hundred twenty nine) of Paryag Polymer with C.P. waste with C.I. or M.S. bracketsPainted with white including cutting and making good the walls wherever required but excluding fitting: No. 1022 Size 460х560х229 (four hundred sixty into five hundred sixty into two hundred twenty nine) of Paryag Plymer with drainage board, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm (five hundred eighty into three hundred eighty into three hundred fifty millimeter) with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required: Flat back urinal small No. 60001 of hindware with 5 litre P.V.C. automatic flushing cistern, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete: Solid type, White solid plastic seat with lid, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing 600mmx300mm(six hundred millimeter into three hundred millimeter) size white vitreous china division plat for urinal, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing white vitreous China pedestal for wash basin completely recessed at the back for the reception of pipes and fittings, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
Providing and fixing C.P. Brass waste (Heavy duty IsI marked Is:8931 &8934)for wash basin or sink:32mm dia (Thirty Two millimeter diameter) including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm (thirty two millimeter) diameter, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing 100 mm (hundred millimeter) sand cast CP grating for gully trap, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
Providing and fixing 600x450mm (six hundred into four hundred fifty millimeter) beveled edge mirror of superior glass (of approved quality) complete with 6 mm (six millimeter) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
Providing and fixing C.P. Brass towel rail (Heavy duty ISI marked IS: 8931 & 8934) complete with C.P. brackets fixed to wooden plugs with CP brass screws with concealed fittings arrangement of approved quality: 600x20mm (Six hundred into twenty millimetre), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing 600x120x5mm (six hundred into one hundred twenty into five millimeter) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete, fixed with 40mm (fourty millimeter) long screws, rawl plugs etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing toilet paper holder : C.P. brass, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing C.P. brass bib cock (long nose) of approved quality confirming to IS:8931: 15 mm (fifteen millimeter) nominal bore, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
Providing and fixing C.P brass pillar tap of Jaquar with capstan head (heavy duty ISI marked Nos. I.S. 8931 & 8934) with capstan head :- 15mm (Fifteen millimeter) dia, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931, 15mm (fifteen millimeter) nominal bore: including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
Providing and fixing 15mm (fifteen millimeter) mixer for kitchen sink with top and bottom swinging spout, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm(fourty five centimeter) length 15 mm(fifteen millimeter) nominal bore, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
Providing and fixing CP Brass 32mm (thirty two millimeter) size Bottle Trap for wash basin and sink of approved quality & make and as per the direction of Engineer-in-charge,including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing C.P. brass stop cock (concealed) of standard desizn and of approved make conforming to IS: 8931: 15mm (fifteen millimeter) dia, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing PTMT bib cock of approved quality and colour : 15 mm (fifteen millimeter) nominal bore, 86mm (eighty six millimeter) long, weighing not less than 88 (eighty eight ) grams, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing PTMT push cock of approved quality and colour : 15 mm (fifteen millimeter) nominal bore, 80mm (eighty millimeter) long, weighing not less than 46(fourty six ) grams, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
Providing and fixing brass full way valve with wheel, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
15mm (fifteen millimeter) nominal bore
20mm (Twenty millimeter) nominal bore
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./H.P.H.D. plastic ball : 15 mm (fifteen millimeter) nominal bore, 105mm (one hundred five millimeter) long, weighing not less than 138(one hundred thirty eight ) grams, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 8 mm (eight millimeter) diameter C.P. / S.S. Jet with flexible tube upto 1 (one)metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and fixing ISI marked high pressure PVC spigot and socket, waste and ventilating pipes including fixing with approved adhesive etc. complete: 150 mm dia.(one hundred fifty millimeter diameter) in trenches, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing and laying cement concrete 1:5:10 (one cement : five coarse sand :ten graded stone aggregate 40 mm (forty milimeter nominal size) all-round S.W./ PVC pipes including bed concrete as per standard design : 150 mm (two hundred fifty milimeter) diameter pipe, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Inside size 90x80 cm and 45 cm deep including Precast RCC Cemocrate or equivalent cover with frame (heavy duty) 455x610 mm internal dimensions, With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Precast RCC Cemocrate or equivalent (Heavy Grade) cover with frame trape (Standard Pattern)
Inside size 120x90 cm and 90 cm deep including Precast RCC Cemocrate or equivalent cover with frame (heavy duty) 455x610 mm internal dimensions, With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Providing and fixing in position pre-cast R.C.C manhole cover and frame of required shape and approved quality, LD- 2.5 Rectangular shape 610х 450 mm (six hundred ten into four hundred fifty millimeter) internal dimensions, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .
Supplying and fixing 300x300 mm (three hundred into three hundred milimeter) Precast cemocrate or equivalent (Heavy Grade) cover with frame for gully trap (standard pattern), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and installing Mono Block Electric pump 2 HP single phace of Kirlosker make or equivalent including fixing complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Cutting holes upto 30х 30 cm(thirty into thirty centimeter) in walls including making good the same: with common burnt clay F.P.S.(non-modular) bricks, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Cutting holes upto 15х 15 cm(fifteen into fifteen centimeter) in R.C.C. floors and roofs for passing drain pipes etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4(one cement: two coarse sand: four graded stone 20mm(twenty millimeter) nomianl size), including finishing complete so as to make it leak proof, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
Providing, laying, jointing and pointing with a stiff mixture of cement mortar in proportion of 1:1(one cement: one sand) 150mm (one hundred fifty millimeter) internal diameter salt glazed stonware garde 'A' half round channels, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.
anshika infracon private limited
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .