Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.3 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED BEING L1 | |
| 2 | L2₹34.4 L+₹14,087.75 (0.41%)Rejected-AOC R O KHREW TEH PAMPORE DISTT PULWAMA PIN 191103 J K | PULWAMA | JAMMU AND KASHMIR | 191103 | L2 | Rejected-AOC REJECTED DUE TO NOT BEING L1 | |
| 3 | L3₹35.5 L+₹1.2 L (3.42%)Rejected-AOC | L3 | Rejected-AOC REJECTED DUE TO NOT BEING L1 |
Tender Value
₹38.3 L
EMD Value
₹76,600
Closing Date
31 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 861 EWS
GE 861 EWS c/o 56 APO
SPECIAL REPAIR TO BLDG NO P 103 OR COOK HOUSE AND DINING HALL UPPER CAMP AND BLDG NO P 36 OR LIVING ACCN AT LOWER CAMP UNDER GE 861 EWS
2023_MES_621298_1
GE 861 EWS-48/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE 861 EWS
As per tender documents
7 documents required · 7 mandatory
₹500
GE 861 EWS
₹76,600
Yes
8 Dec 2023
3 Oct 2023
7 Nov 2023
3 Oct 2023
31 Oct 2023
17 Oct 2023
Amount
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.5 sqm complete all as specified and directed.
Taking down chowkat or frame with shutters (without taking shutter from the frame) exceeding 1.5sqm and not exceeding 4.00 sqm each complete all as specified and directed.
Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.
Demolition of brick/ stone masonary work built in Cement Mortar including in all quoins etc and precast concrete articles complete all as specified.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar, complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors & paving n.exc 15 cm thick (below or above ground level) complete all as specified and directed.
Dismantling boarding of any description,fixed in any position with nail,complete all as specified and directed.
Demolition wall and ceiling boards (fibre, Pulp, insulation etc) or insulation board/slabs/blankets, any thickness, including cover fillets & snap grid frame etc, complete all as specified and directed.
Dismantling of timber scantling of any description complete all as specified.
Dismantling fillets,rails etc un framed wk under 40 sqcm fixed in any position with nails complete all as specified.
Dismantling plain or corrugated steel sheeting , any gauge and thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.
Dismatling of cast iron or reinforced concrete drain pipes in any size, jointed in cement mortar and taking out of trenches, if required complete all as specified.
Taking up or down 15mm bore steel tubing and connection, including cleaning for refixing or removal from site, complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.
M&L of brick work with sub class 'B' bricks straight or curved on plan exceeding 6 Mtr mean radius built in Cement Mortar 1:6 complete all as specified.
All as per item No 16 here-in-before but except bricks complete all as specified.
15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished the surface even and smooth without using extra cement, complete all as specified.
10mm thick rendering on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L PCC 1:2:4, type B-1 using 20mm graded stone agregete as in sides of rounded or chamfered on edges of interlocking tiles complete all as spd & directed by Engr-in-Charge.
M&L for 50mm thick Plain cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base for laying tiles etc complete all as specified & directed by Engr-in-Charge.
M&L for 75mm thick Plain Cement Concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate), finished even and smooth without using extra cement as in plinth protrection complete all as specified and directed.
75mm thick PCC 1:4:8 Type D-2 (40 mm graded stone aggregate) as in sub-floor, sub-base, floor and pavings, etc., complete all as specified and directed.
Non-skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6, complete all as spcified and directed.
All as per item No 24 here-in-before but such as skirting, dado,vertical surface including 10mm thick rendring in cm 1:4 complete all as specified.
Non-skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.18 sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6, complete all as spcified and directed.
All as per item No 26 here-in-before but such as skirting, dado,vertical surface including 10mm thick rendring in cm 1:4 complete all as specified.
M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm over and including 15mm thick screed bed in Cement Mortar 1:6 in floors etc set and jointed in neat cement slurry and in white or coloured cement to match the surface complete all as specified.
Glazed ceramic coloured tiles 450mm x 300mm x 7-8mm thick, designer & pattern(dark & light shade combination) as in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed.
18-20mm thick machine cut granite (of any type) tiles, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete, over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.
Machine cut kota stone slab flooring 18-20mm thick of size not less than 0.30sqm of each slab over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
Machine cut kota stone slab 18-20mm thick in riser of steps, riser of staircase, skirting, dado and pillar laid over cement screed and jointed and including 10mm thick backing coat in cement mortar 1:3 to receive, complete all as specified and directed.
Chequered coloured cement concrete tiles of size 300 x 300 x 18-20mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry, laid in floors, over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.
60mm thick factory made machine pressed precast concrete coloured interlocking paver block with grey cement and pigment, any shape, size and design as approved by Engr-in charge confirming to IS 15658-2006, M-35 grade, complete all as specified and directed.
M&L for sand cushion filling for floor, foundation etc including watering and consolidation complete.
Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including one shop coat of red oxide primer, complete all as specified and directed.
S&F rolled section as in main and cross beam ,rafter,purlin where conneted to rafter and running rails complete all as specified.
Mild steel works as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed.
S&F second class soft wood plain, solid, staight chowkats and frames wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified.
M&L cutting holes in brick wall exc half brick but not exc one brick for inserting hold fast and macking good dismanteled portaion in cm 1:4or cement concret 1:2:4 type B-I built in cm complete all as specified.
Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown in SSR Part-II, complete all as specified and directed.
Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rails and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to in stiles & rails with suitable PVC sheet beading and joinned together with solvent cement supplying & fixing in frames at site as per specification and drawing shown in SSR Part -II, complete all as specified and directed.
35mm thick, 2nd class hardwood (Sal/ Hollock) factory made, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneers on both faces. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified and directed.
30mm thick, 2nd class softdwood factory made glazed and skeleton shutters, open rebated and prepared to receive glass or gauge,etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (a) for door shutter supplying and fitted to chowkats, complete all as specified and directed.
M&L for second class soft wood clean sawn scantling fixed in framed work complete all as specified.
All as per item No 45 here-in-before, but except timber complete all as specified.
S&F 605mmx605mm GI frame work for seamless celling snap grid frame work for false ceilling with all necessary angle & Tee arrangement with and incl fixing cleats screw etc all as specified.
S&F hanger 6mm dia GI (upto 1200 mm length) adjusting level fixed to roof by means of celling complete all as specified.
S&F false celling 8mm thick (Non asbestos fibre cement building board) fixed in celling flat or sloping inserted in GI/aluminium frame work complete all as specified.(make-Armstrong,saint Gobain)
S&F 5mm thick colour printed PVC sheet fixed on solid PVC wall lining , insulated PVC wall linning fixed to PVC panneling to interlock each pannnel through groovs and toung complete all as specified.
S&F 5mm thick PVC sheet fillet of width 35mm for wall pannelling inclusive of fixing on to wall to make PVC frame as per specifaction and drawing complete all as specified.
M&L 6mm thick ply wood, grade BWR, type BB fixed with nails to timber frame work as in ceiling complete all as specified.
S&F in repair prelaminated, particle board 18/19mm thick exterior grade prelaminated one side with decorative choice lamination fixed with nails timber frame work complete all as specified.
S&F 20mm thick boarding 2nd class soft wood fixed with nails planed one side with butt joints as in eves boarding complete all as specified.
S&F Powder Coated Anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.
S&F Powder coated of any colour (Thickness or powder coating not less than 50 micron).anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.
S&F Powder coated of any colour (Thickness or powder coating not less than 50 micron) anodised aluminium window(three track) and ventilator shutters, cupboard shutter without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified
S&F medium density fiber board 12mm thick fixed with frame wk complete all as specified.
Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall, fixed with self tapping screws, complete all as specified and directed.
All as per ser item No 56 here-in-before but except sheets complete all as specified.
Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall and eave boards fixed with self tapping screws, complete all as specified and directed.
M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.
M&L Plain fillets, square, rectangular in section exc 13 Sqcm but n.exc25 Sqcm clean sawn secured with nails in Ilnd class soft wood.
M&L Plain fillets, square, rectangular in section exc 3 Sqcm but n.exc 6 Sqcm clean sawn secured with nails in Ilnd class soft wood.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square n.exc 0.5 sqm each pane complete all as specified.
S&F 5.5mm thick sheet tinted glass ordinary quality and glazing with aluminium beading/clips etc in square exc 0.5 sqm each pane complete all as specified.
S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified.
S&F aluminium anodised tower bolt of extruded section of length 150mm and fixed complete all as specified and directed.
S&F aluminium anodised tower bolt of extruded section of length 100mm and fixed complete all as specified and directed.
S&F aluminium anodised handle of length 150mm and fixed complete all as specified and directed.
S&F aluminium anodised handle of length 100mm and fixed complete all as specified and directed.
S&F to 75mm long butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.
S&F to 100mm long butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.
S&F 100mm long hasp and staple safety type aluminum anodised with mild steel hinge pin including bolt to hinges plate and fixed screws.
S&F aluminium alloy anodised sliding door bolt 250mm of length with hasp,staple (bolt type) and fixing clips of sheets cast or extruded section and fixing bolt and sliding bolts comlete all ass pecified.
S&F of 15mm dia mild steel water tube medium graded galvanised with all fitting and fixed complete concealed to walls and ceiling or laid in floor complete all as specified.
S&F in repairs Rotational moulded polyethylene water storage tanks 1000 litre capacity, three layer (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing tank complete all as specified
S&F in repairs vitreous china squatting pan water closet, orissa pattern, size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including cast iron 'P' or 'S' trap, jointing to flush pipe including lime concrete bedding and all joint making good to the floor, complete all as specified and directed.
S&F in repairs vitreous china wash basins size 450x300 mm type excluding taps, waste chain, porcelain stopper and plug but including brackets complete all as specified.
S&F in repair viterous china wash hand basin size 450mm dia oval type excluding tap, waste chain. Porcelain stopper and plug but including brackets.
S&F in repair 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified.
10 litre capacity PVC valveless, low level, synphonic action type, flushing cistern, with inlet, ball valve, float valve, handle including brackets (fixed in repair), complete all as specified and directed.
S&F in repair PVC connection 15mm size with PTMT nuts of length 375mm, complete all as specified and directed.
S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repair 15mm bore bib tap, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, complete all as specified and directed.
S&F in repair 15mm bore pillar tap cast copper alloy with capstan head, chromium plated, screw down high pressure, with or without lettred hot or cold with long screwd for iorn pipe and fixed comlete all as specified.
S&F in repair 15mm bore stop valve, fancy type, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union, complete all as specified and directed.
S&F in repair Curtain Rod/ drapery rod 25mm dia Decorative type with a pair of brackets, including side holders, powder coated of approved pattern and colour, complete all as specified.
S&F 75mm in Bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified.
S&F 110mm in Bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified.
S&F 75mm in Bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified.
S&F 110mm in Bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified.
S&F 75mm PVC (SWR) bends any radius, complete all as specified.
S&F 110mm PVC (SWR) bends any radius, complete all as specified.
Preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint over a coat of alkali-resistant priming coat, complete all as specified and directed.
Preparation of old plastered surfaces of wall and applying one coats of cement base paint, complete all as specified and directed.
M&L Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as spd & directed by Engr-in-Charge.
M&L for one coat of white wash on old surfaces as in ceiling including preparation of surface complete all as specified.
Preparation of old surfaces of walls, plastered or unplastered surface of one coats of oil bound distemper on wall, complete all as specified and directed.
Preparation of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.
Preparation of old painted wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint to match the existing surface, complete all as specified and directed.
M&L for Preparation of new steel surface of any description over 10 cm width or girth and applyin two coat of synthetic enamel paint over one coat of red oxide complete all as specified.
M&L for Preparation of old steel surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.
Taking down carefully old U/S point wiring copper/Aluminum (light/ fan /sockets/power) complete with switches, sockets, fan regulators, ceiling roses, lamp holders, brackets, ,removing material to store for keeping in safe custody and making good to disturbed surfaces as directed by Engineer-in-Charge.
M&L for concealed point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100volts, drawn through and including non metalic rigid PVC Conduit not less than 25mm with all accessories fixed on wall//ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of Sunken box/ hylem sheet fixed on wall for fixing the switches, switch sockets,sockets, regulators etc complete all as specified for One light/Fan point controlled by one 5A switch including making good the disturbed surfaces of walls to existing specification completed all as specified and directed. Note: (a) Colour coding shall be followed as given below:- (i) Phase - Red/Yellow/Blue (ii) Neutral - Black (iii) Earth - Green (b) Electrical wiring above false ceiling shall also be drawn through medium grade PVC conduit.
All as per item No 107 here-in-before but, one 3 pin, 5A flush type switch socket point on same board board.
All as per item No 107 here-in-before but, one 3 pin, 5A flush type switch socket point on independent board.
M&L for concealed point wiring complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 2.5 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, not less than 25mm PVC condiut with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including sunken box/ hylem sheet in any module complete for One 3 pin, 15A switch socket combination on the independent board complete all as specified and directed.
S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body flush type complete all as specified and directed by Engr-in-Charge.
S&F switch piano flush type single pole one way ,5/6 Amps complete all as directed.
Supply and fix switch sockets combination 3 pin 5 Amps flush type 240 Volts AC complete.
Supply and fix switch socket combination 2 in 1, 3 pin, 5 & 15 Amps flush type universal controlled by one switch flush type 240 Volts AC complete.
S&F lamp holder PVC/polycarbonate insulated body type complete all as directed.
Supply and fixing of in replacement of LED 7 watt pin type bulb complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair new generation walll/surface mounted 18W LED batten fitting, 220V AC, 4 feet surface mounted provides high quality ecomonic energy saving lighting complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round/square block-02 Nos including connecting up with three core flexible copper conductor cable with suitable size and all as directed by Engr-in-Charge.
S&F in repair of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
LED light fitting 1 x 10 Watt , 2 ' long, 220 V AC, lighting fixture with extruded Al heat sink , environment friendly , energy efficient ready to use pack including LED tube complete with inbuilt electronic driver , PCB , connector block etc including connecting up with three core twisted flexible copper conductor cable with suitable size LED tube including taking out old, complete all as specified and directed.
S&F in repair of LED building security light fitting 35 Watt 230 V AC outdoor type, energy saving and environment friendly light fitting with electronic geart housed with high pressure die cast aluminum housing LED street light luminaires complete with IP66 protection including all accessaries and taking down old existing unsv, complete all as specified and directed.
S&F in repair of double door type SPN DB 12 Way ,230V with 100A copper busbar each phase , with metalic double door type IP-43 IK 09 protection suitable for housing MCB's all as specified and directed by Engr-in-Charge. Note : MCB DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.
S&F MCB SP 6-32 Amps,10KA, 'B' series 240V complete all as specified and directed.
S&F MCB SPN 32 Amps,10KA 'C' series 240V complete all as specified and directed.
Disconnecting & taking down old Unservicable cable & Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3½ core complete all as specified and directed by Engr-in-Charge.
Supply and fix in repair of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete fixing, cutting and making good existing surface to match all as directed by Engr-in-Charge.
S&F in repairs security light brackets with 1.50mtrs long 40mm dia light grade galvanised iron pipe with 30° bend including flat iron clamps, nuts, bolts and washers to brace the same properly duly painted with two coats of silver coloured synthetic enamel paint over one coat of red oxide primer and making the good to disturbed surfaces to match with existing, complete all as specified and directed.
Supply and laying in repairs 40mm dia GI tubing light grade with all fitting laid in trenches or pavement or fixed on wall or along pole complete for protection of GI strip or crossing of nallaj/bridge/road etc., complete all as specified and directed.
Sub main wiring with two single core PVC insulated flexible copper conductor cable of size2.5 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 2.5 sqmm as earth lead in & including PVC conduit medium grade 20mm dia, 2mm thickness ISI marked incl taking down old unsv, complete all as required at site or directed.
M&L for sub-main wiring with 2 runs of 10.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and iincluding non metalic rigid PVC casing and caping not less than 25mm with all accessories fixed on wall//ceiling/truss etc as required, including one run of 10.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green
Earthing complete with galvanised steel earth plate electrode 60 cm x 60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level. connecting to the GI earth strip 25x4mm galvanised MS strip by means of bolts, nuts, check nuts and washers of galvanised iron and earth wire protected by provision of GI light grade pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and handle of 6mm dia MS bar made to shape, GI medium grade 20mm bore pipe for watering , perforated at bottom. 1.75 metre long placed on top edge of earth plate. charcoal and common salt filling with fixing arrangement, funnel wire mesh and earth work in soft soil returning filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate 3 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion. NOTE :- (i) Item of earthing includes cost of 7.5 m long GI wire of size 4 mm dia with protection pipe of 15mm dia GI medium grade, any variation in length shall be adjusted through deviation order based on SSR rates enhanced by (-) 8.0%. (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost.
M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to DBs or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire all as specified and directed by Engr-in-Charge.
Supply, fixing & commissioning in replacement of sheet metal enclosure (junction box) of sutable size fabricated with CRCA sheet steel 2mm thick, front door openable type, powder coated included earth bars cement spill protector cable ties, balnking plates suitable for housed 4 pole MCCB 63Amp as incommer, copperbus bar 200 Amp rating outgoing MCB 40Amp SPN, multifunctioning meter, indication lamp etc complete and suitable to accommodate the following accessories:- (a) MCCB 63Amps 4pole,16 KA,Thermal magnetic - 1 Nos. (b) Changever switch 63Amp 4 pole- 01 No. (c) MCB, SPN 40Amps,10KA- 3 Nos (Out going). (d) MCB, SP 6 Amp,10KA,Thermal magnetic- 2 Nos (Out going). (e) Multifunction meter - 01 No. (f) Indication lamps (R,Y,B) LED type - 1 set. (g) Copper bus bar 200 Amp rating with colour coded heat shrinkable sleeve TPN- 01 set. Note: (i) LT panel cum/ junction box shall be flush in staircase wall & adequate height. (ii) Cement work, plastering work & painting with existing colour included in this rate
M/S SHEIKH FEROOZ AHMAD
M/S LATIF AHMAD MIR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .