Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.4 LAccepted-AOC FLAT NO 203 GH 5 SECTOR 27 PANCHKULA 134116 HRY | PANCHKULA | HARYANA | 134116 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹40.0 L+₹1.3 L (3.47%)Rejected-Finance | L2 | Rejected-Finance Other Than Lowest Bidder | |
| 3 | L3₹40.6 L+₹1.9 L (4.98%)Rejected-Finance 411 STREET NO 4 PANCHVATI NAGAR BATHINDA 151001 | BATHINDA | PUNJAB | 151001 | L3 | Rejected-Finance Other Than Lowest Bidder | |
| 4 | L4₹43.0 L+₹4.4 L (11.3%)Rejected-Finance HOUSE NO 3363 SECTOR 27 D CHANDIGARH | NA | NA | 160001 | L4 | Rejected-Finance Other Than Lowest Bidder |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
8 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Chandigarh
GE Chandigarh N Area pin-160003
WELCOME MAINT TO OFFRS/JCOs/ORs MD ACCN INCLUDING REPAIR/REPLACEMENT OF JOINERY IN JCOs/ORs MD ACCN AT K AREA AND SECTOR 28/29D UNDER GE CHANDIGARH
2023_MES_595967_2
GE/CHD-24/2023-24
Open Tender
Civil Works
Item Rate
270 days
Chandigarh
Class D category a(i) for contractor enlisted in MES
7 documents required · 7 mandatory
₹500
GE Chandigarh
₹80,000
Yes
5 Aug 2023
17 Jun 2023
10 Jul 2023
17 Jun 2023
8 Jul 2023
26 Jun 2023
17 Jun 2023 - 21 Jun 2023
Amount
M& L for Pressed steel frames of profile size 125mm x 60mm in section fabricated with 1.25mm thick mild steel sheet for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & including one shop coat of red oxide primer complete all as specified and as directed.
M& L for Pressed steel frames of profile size 105mm x 60mm in section fabricated with 1.25mm thick mild steel sheet for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & including one shop coat of red oxide primer complete all as specified and as directed.
Taking down Chowkhats or frames exc 1.5 sqm but not exc 4.00 sqm ech but with shutters (without taking off shutters from the frames ) complete all as specified
M&L plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate, as for back filling the chowkats, as in coping, bed plates including necessary form work and weathering, slightly rounded or chamfered angles and throating ,including demolition of cement concrete complete all as specified and as directed by Engr-in-charge.
M&L for providing cement concrete 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) in blocks for fixing hold fasts & pressed steel frames for doors including necessary form work including demolition of PCC complete all as specified and directed.
M&L prepration of new wood and wood based surfaces of any description over 10cm width or girth and applying two coats synthetic enamel paint complete all as specified and directed.
Taking down wooden shuters exc 1.5 sqm but n.exc 4.00 sqm each , complete all as specified and directed
S&F factory made 35mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type with one faces are covered with decorative face veneer with lipping/frame to match, including a shop coat of pink primer complete all as specified & directed by Engr-in-Charge.
S&F factory made 35mm thick second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats including a shop coat of pink primer complete all as specified & directed by Engr-in-Charge.
S&F prelaminated 18mm thick lead free factory made 100% solid WPC (wood polymer composit) having high natural fiber content 25to 30% wood colour sheet with density not less than 500Kg/Cum and the weight of sheet 1 Sqm should be 11Kg manufactured by ISO 9001/2015 certified compnay shoud be 100% water proof, termite proof, fire retardent manufactured by single layer extrusion process with excellent screw hold capacity and shore D hardness complete all as specified & directed by Engr-in-Charge.
S&F 30 mm Continuous (piano) hinges, brass, bright finish or electrogalvanised complete all as specified and directed.
S&F 125 mm Brass handles, cast type, polished bright complete all as specified & directed by Engr-in-Charge.
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, bright finished complete all as specified and directed
S&F 100 mm Hasp and staple, safety type,brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & directed by Engr-in-Charge.
S&F 140 mm Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in floor complete all as specified & directed by Engr-in-Charge.
S&F 50 mm long magnatic catcher of brassalloy body superior quality and fixed with screw complete all as specified & directed by Engr-in-Charge.
S&F stainless steel cutlery pan basket or any other basket of any description/pattern as approved by GE fixed with sliding channel revolving wheels , fixed to wood based frame work , complete all as specified and directed
S&F stainless steel auto close (dadu) hinges suitable for PVC moulded shutter fixed in position with stainless steel screw complete all as specified and directed
S&F telescopic channel 400-500 mm long and fixed in position with stainless steel screws , ISI marked , suitable for cupboard drawers , complete all as specified & directed by Engr-in-Charge.
Taking down Chowkhats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frames ) including making good disturbed surfaces complete all as specified
S&F solid PVC door frame of size 50mmx47mm made out 5mm plain colour PVC sheet reinforced with MS square tube made as per specification and drawing.
M&L Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottomrails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, lippling & fixing in the frame at site as per specification & drawing.
S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete with glazing bars , dovetailed or welded as per Drg No TD-277R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh and making good as existing surfaces complete all as specified and directed.
S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete without glazing bars , dovetailed or welded as per drawing No TD-276R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh and making good as existing surfaces complete all as specified and directed.
S&F 4.00 mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
S&Fin repair 3.00 mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each pane including hacking out old bk glass any size on wooden frames complete all as specified and directed.
All as item No.26 above but frosted quality.
S&F in repair Stainless steel wire cloth.0.36mm nominal dia of wireand average width of aperture 1.40mm and fixed withstainless steel wire staples
S&F 150 mm size MS door spring including roller and roller plate by means of welding or screwing down complete all as directed.
S&F for 100 mm PVC butt Hinges for PVC doors complete all as specified and directed .
S&F aluminium handles, cast type, anodised of size 150 mm all as specified & directed.
S&F Aluminium anodised, barrel tower bolts of extruded section 200 long complete all as specified and directed .
S&F aluminium alloy, anodised, sliding door bolt 300mm long with hasp, stapple (bolt type) and fixing clips of sheet, cast or extruded sections complete all as specified and directed .
M&L for 18-20 mm thick coloured granite slab (table rubbed polished) as in cooking platform , jamb, cill, step & riser setted and jointed with cement slurry and bedded over & including 15mm thick bedding layer of cement sand mortar (1:4), & pointed with white/ coloured cement including grinding, rounded and chamfered edges and granite polishing etc including dismantling of stone slab complete all as specified and as directed.
Demolition of cement concrete as in ground floors and in paving n. exc 15cm thick above ground floors and removing rubbish out of MD land complete all as specified and directed.
M&L for framed work as in doors or gates of angle of any section with gusset plates, rails, braces etc. complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittngs (including of mild steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing inluding dismantling of doorshutter and door frame (FE-290 Gde E 165 )complete all as specified.
S&F 1.25 mm thick Steel rolling shutters fixed in repair, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: but gear operated type with bevel gear box and crank handle all as specified in SSR Part I clause 10.23 complete all as specified and directed.
Re-fixing aluminum shutters of any description area exc 1.5 sqm and not exc 4.00 sqm each after easing and adjusting in the same opening , all as specified and as directed.
S&F in repair rubber gasket/aluminium beading to aluminium shutters with glass and partitions of existing size and shape after taking out glass omplete all as specified and directed.
Taking out old glass (any thickness) from aluminium door shutter, window , aluminium partition with rubber beading / aluminium beading and fixing new glass 5 mm thick with new rubber beading , aluminium beading and tightening the same complete all as specified and directed.
Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P.brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings whereverrequired including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge
S&F 4mm thick sheet glass ordinary quality and fixed in aluminium door/window any size in each pane complete all as specified and directed.
S&F Stainless steel wire cloth.0.36mm nominal dia of wireand average width of aperture 1.40mm and fixed withstainless steel wire staples
S&F aluminium grills size exc. 4mm x 4mm and aperture n.exc. 80mm including. fixing with aluminium Y channel, 1.20mm thick with steel screw complete all as specified and as directed.
M&L Securing glass of any description in existing metal frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work complete all as specified and directed
S& F in repair aluminium 2 levers Mortice lock,vertical type, size 100 mm complete all as specified and directed
Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame including taking down and making good complete all as specified by the manufacturer and as per directions of Engineer-in-charge
Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) including 5mm thick toughened . including taking down and making good of doors complete all as specified by the manufacturer and as per directions of Engineer-in-charge
S&F in repair 12 mm thick toughened glass including fixing with cleat in floor, ceiling and lining alongwith hinges to hold door arrangment , including hacking out old glass complete all as specified and directed by Engr-in-charge .
S&F in repair chrome finish shower panels size of 1600 x 200 mm model finish code JPL-SSF-ST88158B ,complete all as specified and directed
Dismantling wall and ceiling boards (fibre pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets.
M & L for 9 mm thick PVC pre liminated gypsum board as in ceiling including anodised aluminium snap grid frame work for ceiling having grid size 605 x 605 mm comprising of wall angle of size 25 mm x 25 mm x1.30 mm, main runner of size 38 mm x 26 mm x1.30 mm. The grid system will be suspended at every 1200 mm c/c in both directions by using 3.5 mm dia aqualine wire fixed to purline or RCC roof with suitable fastners to withstand the lood of grid system with ceiling board complete all as specified and directed.
S&F in repair solid PVC wall lining consisting of 5mm thick wood grain PVC sheet fixed at site inclusive of solvent cement, rawl plug and screws complete all as specified and directed.
M&L for complete removal of existing treatment of walls including preparation of the surfaces properly and applying two coats of oil bound distemper over and including 1mm wall care putty to achieve smooth surfaces, complete all as specified and as directed
M&L prepration of old decorated surfaces of ceiling and applying one coat of white wash, complete all as specified and as directed.
M&L for preparation of old painted steel and iron surfaces by brooming or by steel wire brushing, scrapping down snow soot,moulds, moss and efflorescent salts and treading oil and greasy spots, of any description over 10cm girth or width not otherwise described and applying one coat of synthetic enamel paint( ist quality )complete all as specified and directed.
M&L for preparation of old painted wooden surfaces by brooming or by steel wire brushing, scrapping down snow soot,moulds, moss and efflorescent salts and treading oil and greasy spots, of wood and wood based materials of any description over 10cm girth or width not otherwise described and applying one coat of synthetic enamel paint all as specified and as directed.
M&L for preparation of old distempered surfaces by brooming or by steel wire brushing, scrapping down snow soot,moulds, moss and efflorescent salts and treading oil and greasy spots, not otherwiseof walls including corinces pillars etc and applying one coat of Oil Bound distemper, all as specified and directed.
All as per sl item No 60.00 here-in-before but on ceilings.
Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for light coloured vitrified tiles 8 mm to 9 mm thick (square rectangular) area of each tile not exceeding 0.38sqm laid as in floors, set and jointed with cement slurry over & including 15mm thick bedding of layer of cement sand mortar (1:4) and pointed with coloured cement to match with surfaces of tiles complete all as specified and as directed.
All as per ser item No 63.00 but in vertical surfaces such as skirting over and including 10 mm thick rendering in CM (1:4) , complete all as specified and directed .
M&L for coloured non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm (1st quality), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including screed bed or bedding layer of 15mm thick in CM (1:6) , complete all as specified and directed .
All as per item no 65.00 above but as in skirting & over & including 10mm thick rendering of cement sand mortar (1:4)
M&L for Glazed ceramic coloured /printed tiles of size 450mmx 300mmx7mm thick as in wall for skirting/dado setting & jointed with neat cement slurry over & including 10 mm thick rendering of cement sand mortar (1:4) and pointed with coloured cement to match with surface of tiles complete all as specified and as directed.
M&L for coloured non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including screed bed or bedding layer of 15mm thick in CM (1:6) , complete all as specified and directed .
S&F in repairs drapery rods fancy type 25mm in dia with end MS powder coated brackets & finiels fixed with rawl plug and screws, complete all as specified and as directed.
S&F chromium plated shower rose 150mm square in shape with 450 mm long arm with or without swivel joint fixed in repair complete all as specified and as directed.
S&F single piece WC of size 365x655x765mm with flushing cistern and connection pipe, P or S trap (closed pattern incl all necessary accessories like rag bolts, kitt /gel gasket etc, (including flushing cistern, pvc seat cover , jet and flush pipe complete all as specifed and directed.
Supply & fix in repairs chromium plated, Jet spray including flexible pipe 15mm bore, screwed down, high-pressure pipe of 15 mm bore with wall flange fixed to wash down water closet (pedestal pattern) complete all as specified and directed.
S&F in repair fancy type bib cock chromium plated, dia15mm 2 way complete all as specified and as directed.
S&F for 16mm dia Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl elbow, socket, reducers etc., including taking down of GI tubing 15 mm dia with fittings ,complete all as specified and directed .
S&F for 20mm dia Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl elbow, socket, reducers etc., including taking down of GI tubing 20 mm dia with fittings complete all as specified and directed .
S&F PVC (SWR) 75 mm bore pipes single socketed, in any lengths with rubber ring joints, fixed to wall with MS clamp of 25x3mm with nut and bolt taking down PVC Pipe 75mm dia complete all as specified and directed.
Material & labour for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sun shades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth in brick walls complete all as specified and directed.
M&L rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces, including taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubing down with water etc all as specified and directed .
M&L for preparation of new surfaces of walls and applying two coat of oil bound distemper over a coat of primer including 1mm thick wall care putty , all as specified and directed.
M&L rendering 10mm thick in CM (1:4) on fair faces of brick work or concrete surfaces, including taking down cement plaster on bricks or stone walls etc. including raking out joints, hacking for key scrubing down with water etc all as specified and directed .
M&L for preparation of new surfaces of walls and applying two coat of cement based paint over a coat of primer, all as specified and directed.
M&L rendering 10mm thick in CM (1:3) on fair faces of brick work or concrete surfaces, including taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubing down with water etc complete all as specified and directed .
M&L for preparation of new undecorated surfaces and applying three coat of white wash on ceiling, and complete all as specified and directed .
Demolition of brick work built in cement mortar including all quoins arches pillars and removing rubbish out of MD land complete all as specified and directed by Engr-in-charge .
M&L for Brick work with sub class 'B' bricks, class Designation 100 Kgf/cm2 (Approx) straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.
All as per item No 85 00 above but except old size sub class `B bricks as obtained from item 84 above.
S&F in repair 5mm thick PVC sheet fillets of width 35mm for wall panelling to make PVC frame complete all as specified and directed by Engr-in-charge .
S&F sheet glass 5mm thick with rubber gasket and aluminium beading in aluminium door shutters, windows and partitions after hacking out old broken glass complete all as specified and directed by Engr-in-charge .
M&L mild steel work in framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165
M&L 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed by Engr-in-charge
Supply and fix 35mm thick factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of venered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F 16 mm CPVC SDR -11 brass elobw complete all as specified and directed
S&F 16 mm CPVC SDR -11 brass Tee complete all as specified and directed
S&F 16 mm CPVC SDR -11 Male Brass Threaded Adaptor MTA/MBTAcomplete all as specified and directed
S&F 16 mm CPVC SDR -11 Female Brass Threaded AdaptorFTA/FBTA complete all as specified and directed
S&F 16 mm CPVC SDR -11 Tank Adaptor complete all as specified and directed
S&F in repair 16 mm CPVC SDR -11 Union complete all as specified and directed
S&F 20 mm CPVC SDR -11 brass elobw complete all as specified and directed
S&F 20 mm CPVC SDR -11 brass Teecomplete all as specified and directed
S&F 20 mm CPVC SDR -11 Male Brass Threaded Adaptor MTA/MBTAcomplete all as specified and directed
S&F 20 mm CPVC SDR -11 Female Brass Threaded Adapto rFTA/FBTA complete all as specified and directed
S&F 20 mm CPVC SDR -11 Tank Adaptor complete all as specified and directed
S&F in repair 20 mm CPVC SDR -11 Union complete all as specified and directed
M&L preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M/S Bangali Ram
M/s Super Trading Corporation
His Construction Company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .