TURIP-22-23-PK6-PAVER ROADS

Amount

Removing and Stocking of existing Paver Block of Size 83mmthick carefully reuse, as per direction of Engineer inchargeare standared specification

Preparing the Existing surface to laying the road to Proper Gradientand remove the loose soil without damage the Water Supply and otherPipe lines. The Rate inclusive of all charges such as Earth work andremove the same away from the site etc, complete as per standard specifications.

Dismantling Plain cement Concrete including all cost andlabour charges etc, complete (PWD SOR 2022-23 Annexure -3 SI.No .28)

Removal of Excavated Excess Earth (Dismantling PCC)away from the site to 5K.M including loading andtransportation charges etc, complete as per standard specification

Supplying and laying Rubberised Interlocking Paver blockM40 grade Providing and laying of 83mm thick highstrength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressivestrength of 40N/mm2 in uniform shape of approved make tobe laid in flurring bone pattern with stone dust cushionbelow the uniform shap of approved non skitting surface inthe top and the rate including levelling the base preparationof pavers as sub base, stone dust cushion 50 mm thicklaying out of pavement cut the pieces to fix the edge vibringthe pavers,sweeping tranporting loading unloading of layingpaver block as per standard specification,.

Existing paverblock Road

Existing CC Road

Providing and erecting of Direction and placeIndentification Retro-reflectorised sign made out of HighIndensity Prismatic Grade sheeting confirming to Type-IVstandards of IRC-67 : 2012 and ASTM D 4956-09specification and fixed over 2mm thick aluminiun sheetfixed over a back supporting frame of 25mm x 25mm x 3mmMild steel angle and suppoted on a mild steel angle post75x75x6mm with a clear height of not less than 2.10m fromthe ground level to the bottom of the sign board and 0.60mbelow ground level. The sign post should be painted as perIRC 67-2012 and firmly fixed to the ground by means ofproperly designed foundation with M15 grade cementconcrete 45cm x 45cm x 60cm size including cost andconveyance of all material, eqipment , machinery and labourwith all leads and life, loading charges necessary forsatisfactory completion of the work as directed by theengineer in charges . High intensity metro Reflectro sheetshall consist of Miniumum coefficient of Retro -reflection asper Table 6.6 of IRC 67-2012 The retro -reflective sheetingshall be covered under 7 years warranty issued for fieldperformance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67:2012 (asper MORTH&H Specification No .801)

KULANDAIVELU