Construction of 5 Class Room and New Staff Toilet, Providing Smart board and supply of new desk with benches to the Government Girls Higher Secondary School at Bargur in Krishnagiri District.

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.3 : Earth work excavation in Soft disintegrated rock (including refilling) a. 0 to 2 mt.

13.1 : Filling with Excavated Earth

24 : Manufacturing & supply of steel windows (Weight basis)

30 : Ellispattern

31 : Weathering course

37.1 : White washing 3 coats (slaked)

39 : M.s Grills

41 : Painting - New "iron work"

WATER SUPPLY ARRANGEMENTS 51.2: Supply and erection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of 1000 litres (excluding free board) of approved brand (superior variety) with ISI Mark

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

Electrical arrangements 69 : S & F of 16 Amp. Power plug

72 : S & F of Box type Fibre Fan hook

74 : Charges for fixing of "Fan"

76 : S & L of 8 SWG wire

78 : S&F of Earthing Station IS3043 (Type I)

86 : Anti termite treatment

ANNEXURE-I 2.1.1 : Supplying and filling with gravel

2.1.3 : Filling sand (using crushed stone sand)

3.1.1: C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

6.5.1 : Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand) with admixture

8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b) In Stilt/Ground Floor

c) In First Floor

9.5.1 : Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand) with admixture a. In Ground Floor

b. In First Floor

10.5.1 : Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") 110 mm tk (B.P.) (using crushed stone sand) with admixture a. In Foundation and Basement

11.5.1 : Brick Partition work in C.M. 1:4 Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") 70 mm tk (B.P.) (using crushed stone sand) with admixture a. In Ground floor

b. In First floor

14.1.1.I : Precast Cupboard slab 20 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Stilt / Ground floor

b. In First floor

14.1.1.II : Precast cupboard slab 40 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) b. In Stilt / Ground floor

c. In First floor

18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works

c.For Square and rectangular columns and small quantities

21.5.2 : Supply and fixing Solid UPVC door shutter with frame

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) Mixed with Super Plasticiser

29.2.1 : Providing shahabad stone (grey colour) (Polished Shahabad stone 20mm thick with machine cut edges of size 2' x 2' below) of 20mm thick in C.M 1:3 (using crushed stone sand)

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)

32.1.1 : Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx23cmx20mm thick laid over weathering course in cm 1:3 (One of cement and three of crushed stone sand) 12mm thick mixed with Water proofing compound

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) Mixed with Super Plasriciser

35.1.2: Special Ceiling plastering in C.M. 1:3,10 mm tk.(using crushed stone sand) including plasticizer

36.1 : Cement mortar Border in C.M. 1:5, 12 mm tk. (using crushed stone sand) a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

38.7 : Plastic Emulsion PAINT including primer for inner walls

38.7.1 : Exterior Emulsion PAINT including primer for outer walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.1 : Rain water harvesting using defunct borewell and providing perforated cover slab a) Providing pit (M20)

b) Augering 30cm dia

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

52.4 : 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

53.5.2 : Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.1: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - In G.F.(using crushed stone sand)

57.1.2 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" Trap (using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

60.1 : PVC Nahani trap (4way/2way)

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

65.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.5 : Run of 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.6 : Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

105.1 : 4 x 4 Sq mm copper PVC insulated unsheathed single core cable for 3 phase EB service connection.

112.1 : S&F of 225 mm dia sweep AC exhaust fan

344.2 : S&F of Bevelled edge mirror 500 x 400 x 5.5mm

ANNEXURE-II A1: Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade.

A2: Supplying and fixing of UPVC Sliding Door with Roller using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid UPVC Sheets. Shutter using 5mm thick solid UPVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter etc., all complete and as directed by the departmental officers.

A3: Supplying and fixing of CP Two Way Bib Cock with Health Faucet with ISI mark of best approved quality including cost of material and labour charges for fixing etc., all complete and as directed by the departmental officers.

A4: Supplying and fixing smoke control automatic Sanitary napkin Disposal Incenerator machine (disposal capacity of 35 nos/day) to the the site including cost of machine and cost of coveyance charges ect.,, all complete as where required and as directed by the departmental officers ( the disposal capacity of the machine is 35 No's/day.) (The quality of the materials should be got approved by the Executive Engineer before use in work)

A5: Supplying Steel Desk of size 72"x18"x30" with plain book shelf made out of 18g CR sheet & 1"square pipe and steel bench of size 72"x15"x18" made out of 18G CR sheet with 1" Square pipe with Olive Green painting etc., all complete and as directed by the departmental officers.

A6: Supplying, delivey and installation of Smart Board -75 inch Anti Glare Glass Panle Size: 75 inch Anti Glare Glass makes for a view Native Resolution : 3840 (H) X 2160 (V) Systems : Windows 10, Windows 8, Windows 7, Windows XP, Linux, Mac, Android, Chrome. Android System : Android 13, CPU-A55*4, 1.5GHz, GPU - G52 2EE MC1@550MHz, RAM-4 GB DDR4, FLASH MEMORY - 32 GB EMMC5 Aspect Ratio : 16 : 9 Resolution : 4K Resolution Touch Tool : Finger & Passive infrared Pen Touch Point : 20 POINTS TOUCH INPUT: hdmi - 4 (3 rear, 1 front), VGA-1, USB 3.0-3, USB 2.0-3, VGA-1, RJ45 IN-1, RS232-1, AUDIO IN -1, AUDIO OUT-1, BLUETOOTH 4.0 - 1, WI-FI - DUAL WIFI (5G & 2.4G) Speaker 20W : 20W+20W - 2 Nos. OPS System Windows10 Professional CORE I5 Processor 11th Generation, 8 GB RAM, HARD DISK-mSTAT 256 GB SSD, HDMI, and Wi-Fi, Bluetoth. Manufature on site Warranty for Three yeras. including wall mounting Braket, delivery and Installation charges etc., all complete and as directed by the departmental officers.

A7: Supplying and fixing of LED bulbs suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9 watts LED bulb

b) 12 watts LED bulb for bulk head fittings

A8: Supplying and fixing of 18W LED TUBE LIGHTS 4' long with necessary fittings and charges for assembling and fixing

A9: Supply and fixing of LED Bulk head fitting for 12W LED Bulb

A10: Supplying and fixing of 25W LED Street light with necessary fittings (Superior variety) Charges for fixing 25W LED lamp street light fittings

A11: Supply and fixing of 8 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63 A 4 P MCB switch as incoming, 3 nos. 6A to 32A DP MCB and 3 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only

SRI SAKTHI CONSTRUCTIONS (BID ID -1231073)

M K SARAVANAN (BID ID -1232164)

M/S EXTRUSION ENTERPRISES (BID ID -1233529)

arivumani constructions (BID ID -1233530)

P.Haridass (BID ID -1234826)

LGN CONSTRUCTION (BID ID -1235364)

Senthil Kumar (BID ID -1232574)