Civil and Electrical Maintenance Works of Officers and Staff Colony

Electric Bell

TOTAL QUOTED AMOUNT (Exclusive GST) in Rs. P.

GST Amount on Quoted Price in Rs. P.

Applicable GST Rate in %

TOTAL QUOTED AMOUNT (Inclusive GST) in Rs. P.

SCHEDULE- A: (Civil)

SCHEDULE- B: (Civil)

SCHEDULE- C: (Civil)

Tender:AGOCM-01 "Maintenance Works of Officers and Staff Colony, Admin office, OCC, STP and other Civil structures for a period of 2 years in UPMRC at Agra."

Schedule A-Items of DSR-2023

White washing of Depot and staff quarters Boundary wall (VIP area) and other civil structures as required

Doors

Total (DSR 2023)

Miscellaneous DSR Items

Total Schedule A ( DSR 2023 +Miscellaneous DSR Items) (Including GST @18%)

Total Schedule A ( DSR 2023+ Miscellaneous DSR Items) (Excluding GST @18%)

NDSR Items- Schedule B

Schedule B1- NDSR Items

15mm nominal bore

15mm nominal bore

15mm nominal bore

15mm nominal bore

For 110 mm o/d pipes line.

For 110 mm i/d pipe line for sewerage & sanitary

Total (Schedule B1- NDSR Items) (Excluding GST)

Add GST@18%

Total (Schedule B1- NDSR Items) (Including GST)

Schedule B2- NDSR Items

Pumps and Motors at Metro Depot Pump room

Total head - 100 mtr. (Approx.)

Flow rate - 12000 IV/ hr. (Approx.)

Domestic Water Transfer Pumps to O.H. Tank at Water Supply Pump Room

Set of two Pumps ( 1Working +1Stand hy)

Capacity - 5.0 LPS

ainless steel-316 body,Stainless steel-316 impeller, Stainless steel-304 casing, shall of Stainless steel-316 and C.I. base & head with mechanical seal, connected to a TEFC induction motor suitable for 415+1- 10% itaitS, 3 phase 50 cycles A.C. Supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating under foundations, 80x40 mm I section base plate boted to cement concrete foundations complete.Venaor to submit performance curves and technical catalogue of the proposed model for review and information.

NDSR Item No. NS-6.2.1 of Contract AGCC-03 ( 12.46 % below the base rate of 237699.32 and 20% escalation added for 4 years)

Set of two Pumps ( 1Working +1Stand by)

Capacity - 4.0 LPS

FIRE DOORS

NDSR Item No. NS-6.2.2 of Contract AGCC-03 ( 12.46 % below the base rate of 221910.71 and 20% escalation added for 4 years)

NDSR Item No. NS-4.1 of Schedule B of Contract AGCC-03 ( 13.13 % below the base rate of 6954.56 and 20% escalation added for 4 years)

NDSR Item No. NS-4.2 of Schedule B of Contract AGCC-03 ( 13.13 % below the base rate of 521.6 and 20% escalation added for 4 years)

NDSR Item No. NS-4.3 of Schedule B of Contract AGCC-03 ( 13.13 % below the base rate of 1275 and 20% escalation added for 4 years)

4.4 NDSR Item No. NS-4.1 of Schedule B of Contract AGCC-03 ( 13.13 % below the base rate of 2434 and 20% escalation added for 4 years)

NDSR Item No. NS-4.5 of Schedule B of Contract AGCC-03 ( 13.13 % below the base rate of 162.28 and 20% escalation added for 4 years)

NDSR Item No. NS-4.6 of Schedule B of Contract AGCC-03 ( 13.13 % below the base rate of 81.13 and 20% escalation added for 4 years)

NDSR Item No. NS-4.7 of Schedule B of Contract AGCC-03 ( 13.13 % below the base rate of 521.6 and 20% escalation added for 4 years)

Total (Schedule B2- NDSR Items) (Excluding GST)

Schedule B3- NDSR Items

PART-A INTERIOR FINISHING WORKS OF OCC & VISITOR'S ROOM

NDSR Item No. NS-1 of Part-A of Contract AGDSH-01 ( 32.5 % below the base rate of 5077.97 and 10% escalation added for 2 years)

NDSR Item No. NS-2 of Part-A of Contract AGDSH-01 ( 32.5 % below the base rate of 6687.29 and 10% escalation added for 2 years)

NDSR Item No. NS-11 of Part-A of Contract AGDSH-01 ( 32.5 % below the base rate of 2098.31 and 10% escalation added for 2 years)

NDSR Item No. NS-16 of Part-A of Contract AGDSH-01 ( 32.5 % below the base rate of 313.94 and 10% escalation added for 2 years)

PART-B INTERIOR FINISHING WORKS OF ADMIN OFFICE

with high density protective surface layer and reverse side adhesive bounding quality confirming to IS-2046 Type-S including cost of adhesive of approved quality etc. complete as per direction of Engineer-in-charge. (12 mm thick toughened glass glazing with Garwara make film fixed on side to maintain the opacity and 50 X 20 teak wood polished beading shall be paid separately, and area of glazing shall be deducted from overall area of partition for payment purpose.)

Providing and fixing 12 mm thick toughened glass glazing in double skin wooden partitions of approved brand and manufacture, Including Garware make sparkling film on one side of glass to maintain the opacity with the help of 50 x 12 mm thick second class teak wood polished beading in approved shade all complete as per direction of Engineer-in-charge (50 x 12 mm thick second class teak wood polished beading shall be paid separately)

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing Garware make film (to be fixed over one side of glass to maintain the opacity of the glass) and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock, floor spring, door closer and stopper etc. to be paid separately)

Providing and Supply of double action hydraulic floor spring make DORMA consisting of floor spring & Transom Door Closers, BTS 75 V with spindle insert including cement box and cover plate – EN 1-4, HO 90 degree, Top centres 8062 with needle bearing Door Straps, zinc-plated, 8021 complete as per direction of Engineer-in-charge.

Providing & Supply of DORMA make Locks for Double Action Door assemblies (Universal centre Lock US 20 with EPC & LKP + Universal strike-box GK 50) as per direction of Engineer-in-charge.

Providing &Supply of DORMA make Pull Handles in Grade 304 TGDID 350 X 25 S, Satin as per direction of Engineer-in-charge.

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat and polishing in required shade to match the adjoining finish complete as per direction of Engineer-in-charge

Providing & Fixing table [1800mm(L) X 750mm(D x 750mm(H)], drawer pedestal and side unit [1500mm(L)X450mm(D)X650mm(H)] made of 19mm thick MDF board of Century make with 1mm thick laminate of Merino make. The edge of the table shall be 2mm wide German rehao edge band. Overall thickness of top of table shall be

Providing & Fixing side table of size 600mm X 600mm made from 19mm thick MDF board of Century make and 1mm thick laminate of Merino make as approved by Architect.

Providing & Fixing storage unit of size 1222mm (L) X 1200mm (W) X 375mm (H) made of 19mm thick MDF board of Century make with 1mm thick laminate of Merino make as approved by Architect.

Providing & Fixing of workstation of size 1050mm(L) X 600mm(W) X 750mm(H) with mobile pedestal made of 19mm thick MDF board of Century make with 1mm thick laminate of Merino make as approved by Architect. The edge of the table shall be 2mm wide German rehao edge band. Overall thickness of top of table shall be

Providing & Fixing storage unit of size 1222mm (L) X 1200mm (W) X 375mm (H) made of 19mm thick MDF board of Century make with 1mm thick laminate of Merino make as approved by Architect.

Providing & Fixing Almirah of size 1200mm (W) X 1500mm (H) X 375mm (D) made of 19mm thick MDF board of Century make with 1mm thick laminate of Merino make as approved by Architect.

NDSR Item No. NS-19 of Part-B of Contract AGDSH-01 ( 28 % below the base rate of 51597 and 10% escalation added for 2 years)

PART-C MODULAR KITCHEN IN STAFF HOUSING (TOWER - A,B & C)

MODULAR KITCHEN WORKS Agra Metro

1) Hinged Unit below Sink:- Height: (560 mm); Depth (560 mm), Width (600 mm), Kitchen Cabinets in approved make MDF exterior 18mm thickness body panels (without back panel), lipping of 1.3mm thickness with openable shutters in MDF 18mm thickness, lipping of 1.3mm thickness. Each shutter shall be fixed to the carcass using two numbers of soft closing hinges (approved make) as per requirement fixed with SS screws, nails etc complete. Including providing & fixing of waste bin holder.

2) Plain Shelf Corner Unit:- Height : (560 mm), Depth = ( 560mm), Width ( 1000 mm), Cabinets in approved make MDF 18mm thick body panels,6 mm thick back panel, 12mm thick shelves (minimum 1 horizontal partition) lipping of 1.3mm thickness with one openable shutter of 300 mm width in MDF18mm thickness 16mm thick ply and 1 mm laminate on each side, lipping of 1.3mm thickness.Each shutter shall be fixed to the carcass using two numbers of soft closing hinges as per requirement (approved make) fixed with SS screws , nails etc complete. All shelves should be supported on approved quality SS pins and shall be adjustable for different heights as per requirements.

3) Plain Gas Cylender Unit:- Height : (560 mm), Depth = ( 560mm), Width ( 500 mm), Cabinets in approved make MDF 18mm thick body panels,6 mm thick back panel, 12mm thick shelves (minimum 1 horizontal partition) lipping of 1.3mm thickness with one openable shutter of 300 mm width in MDF18mm thickness

6)Utensil Unit :- Height : (560 mm), Depth = (560 mm), Width (600 mm), Cabinets in MDF 18mm thickness,6mm thick back panel lipping of 1.3mm thickness with Drawer Facia inMDF 18mm thickness, lipping of 1.3mm thickness. Set of 3 plain soft closing drawers of approved make/Blum or equivalent make of 350 mm height with required SS screw for fixing above component, as per requirement. High precision approved make Tandem/Innotech / innotech mechanism in drawers & baskets.

NDSR Item No. NS-1.1 of Part-C of Contract AGDSH-01 ( 25 % below the base rate of 26044 and 10% escalation added for 2 years)

Others:- Includes all type of hardware required for fixing of kitchen cabinets, skirting and its hardware, legs & its hardware, handles of approved make , filler pieces of floor, hinges, etc.

2) Top Plain Shelf Unit:- Height : (600 mm), Depth = ( 310mm), Width ( 500 mm) 2 nos.,

NDSR Item No. NS-1.2 of Part-C of Contract AGDSH-01 ( 25 % below the base rate of 6443 and 10% escalation added for 2 years)

Includes all type of hardware required for fixing of kitchen cabinet, handles of approved make, filler pieces of top units (as per requirement), hinges, etc complete.

Providing and fixing 50D*90W*60H centimeters 1200m3/hr Auto-Clean kitchen chimney Filterless technology, Touch & Gesture Control of make such as Faber, Hindware, Elica, sunflame etc.

Wardrobe/cupboard:- Providing, making and fixing in position at all floors, locations wardrobe/cupboard of required height with shelf, drawers inside made in 18 mm thick post laminated MDF grade plywood to all members (i.e. at top, bottom, front door, sides & internal partitions etc.) except back side which shall be 6 mm thick MDF grade plywood. Exposed surface shall be finished with 1 mm thick laminate and unexposed surface shall be finished with 0.6 mm thick laminate. All laminate shall be factory hot pressed. Exposed edges shall be finished with 2 mm thick pvc lipping and unexposed edges shall be finished with 0.8 mm thick including all necessary accessories and hardware i.e. hinges, locks, handles, tower bolts, magnetic closure, telescopic channels, hanging rod etc. of approved make as per drawings and directions of engineer in-charge. (refer tender drawing for cupboard types) Note: Only front area will be measured for payment purpose.

NDSR Item No. NS-1.1 of Part-D of Contract AGDSH-01 ( 19 % below the base rate of 21050 and 10% escalation added for 2 years)

Add GST@18%

Total (Schedule B3- NDSR Items) (Excluding GST)

Total (Schedule B3- NDSR Items) (Including GST)

Total Schedule B ( B1+B2+B3) (Excluding GST)

Mason (brick layer) 2nd class

Carpenter 2nd class

Beldar

Add GST@18%

Total(Schedule C Excluding GST)

Add CPOH @ 15%

Total including CPOH

Comprehensive Operation & Maintenance for 1 No. Sewage Treatment Plant & 1 No. Effluent Treatment Plant at Agra Metro Depot in UPMRCL at Agra. The charges for providing Experienced operator/superviser, Oil Greases, Tools, Pump. Motor, and Blower & all mechanical item with any damage, spares motor binding and any other miscellaneous items as required, shall be inclusive under this item rate:

Providing and application of Sodium Hypochlonde for disinfection of STP area: as per direction of Engineer-in- Charge

TOTAL AMOUNT in Words

Total Amount (Inclusive GST) Materials & Repairing of Motors & Cables for Electrical Maintenance Purposes at Market & LAR Rate including Contractors Profit in UPMRC Agra Staff Quarter (A+B+C)

Total Amount (Exclusive GST) Materials & Repairing of Motors & Cables for Electrical Maintenance Purposes at Market & LAR Rate including Contractors Profit in UPMRC Agra Staff Quarter (A+B+C)

Gross Total of Material from DSR -2022(A) (Inclusive GST)

Gross Total of Material from DSR -2022(A) (Exclusive GST)

Table A.9: Total Cost of Works

(refer table A.8)

Amount (INR)

Monthly amount (incl. GST)

Unit Rate/Month/Person

Total (excl. GST)

Gross Total of Material from DSR -2022(A) (Exclusive GST)

Technician (Skilled)

3.5 core, 50 Sq.mm. Al conductor

2nd Year Qty

Estimated amount in Rs. P.

Rate as per LAR of LKSTP-01(35% below the base rate of 30.74 , proportionate basis and 15% Escalation added for 3 years)

Total of Part-B (NDSR items) ( Including GST)

Total of Part-B (NDSR items) ( Excluding GST)

Esclation (10%) (LOA-27/09/2022)

2nd Year Market Rate incl. of GST

Esclation (10%) (LOA-27/09/2022)

Freight Charges

Submersible Pump 2HP(tower A&B 2hp)

2nd Year Market Rate incl. of GST

Esclation (10%) (LOA-27/09/2022)

Freight Charges

2nd Year Market Rate incl. of GST

Esclation (10%) (LOA-27/09/2022)

Freight Charges

Submersible Pump 2HP(tower A&B 2hp)

2nd Year Market Rate incl. of GST

Esclation (10%) (LOA-27/09/2022)

Freight Charges

Submersible Pump 2HP(tower A&B 2hp)

Exhaust Fan(12" & 18")

Esclation (10%) (LOA-27/09/2022)

Freight Charges

2nd Year Market Rate incl. of GST

Esclation (10%) (LOA-27/09/2022)

Freight Charges

Submersible Pump 2HP(tower A&B 2hp)

Split AC 1.5 T

Wet Service

2nd Year Market Rate incl. of GST

Esclation (10%) (LOA-27/09/2022)

Freight Charges

Submersible Pump 2HP(tower A&B 2hp)

Split AC 1.5 T

Wet Service

2nd Year Market Rate incl. of GST

2nd Year Market Rate incl. of GST

2nd Year Market Rate incl. of GST

2nd Year Market Rate incl. of GST

2nd Year Market Rate incl. of GST

Esclation (10%) (LOA-27/09/2022)

Remove and insert of borewell submersible pump up to 7.5 HP including MS pipe pulling and inserting, replacing defective gasket & old rusted nut-bolt etc. required for complete job work

Repairing and re-winding of Main Fire Pump,100/50 HP rating. Rate is inclusive of removing damaged winding, refixing after repair and starting the units

Digital Multifunction meter 96 Sqmm, 3phase 4W, 415V, AC, CTR- /5A, CL-1.0 Auxiliary Voltage 230V AC with RS485 comm Port

Supply of 63 A , TPN MCCB in existing DB (make- L&T/ABB) in existing DB as per site condition /IE rule.

Surface Downlighter 12 W

isting DB as per site condition /IE rule.

Supply & fixing of 250 A , MCCB TPN (make- L&T/ABB) in existing DB as per site condition /IE rule.

Supply and laying of flexible GI conduit of 25 mm dia as per site condition

Supply of 12 V 100 AH Lead Acid Battery (with buyback of old battery) for Use in DG set (size as per site)

Supply of 12 V 150 AH Lead Acid Battery (with buyback of old battery) for Use in DG set (size as per site)

Esclation (10%) (LOA-27/09/2022)

Freight Charges

Submersible Pump 2HP(tower A&B 2hp)

Split AC 1.5 T

Wet Service

3.5 core, 185 Sq.mm. Al conductor

3.5 core, 70 Sq.mm. Al conductor

Annual Manpower Cost

Uniform

Tools & Consumables refer sheet-

Total (Exclusive GST)

Total

The following are the particulars of minor deviations from the requirements of the Tender Document:

Clause

Deviations

Price adjustment for withdrawal of each deviation/s