Constructionn of New office building in sivakasi City municipal Corporation

Amount

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Earth Work upto 2.00m depth

Earth work at 2.00 to 3.00 m depth

Grade beam and mass earth work

Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Pest Control Providing pre-constructional anti-termite treatment including supplying of the chemical (Chlorophyriphos emulsifiable - with ratio 1:19 (one part chemical and 19 part water)) in sealed containers and diluting with ratio specified against each and injecting it creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the Top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. all complete as per specifications. Payment released in 3 stages equally. Area for Measurement will be Outer plinth area

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and Eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Providing and laying in position Standardised Concrete Mix M-25 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 350Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards.

Footing and Footing column

Semibasement

Ground Floor

First Floor

Terrace Floor

Supplying and Fabricating and placing in position MS steel or Ribbed Tor Steel for all Reinforced Cement Concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.(MS rod or RTS bar will be supplied departmentally at section stores and cost will be recoverd at issue rate). the binding wire shall supplied by the contactor.

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38

Footing and Plinth beam

R.C Column

Roof beam and slab

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Ground Floor

First Floor

Terrace Floor

Brick partition walls of 11.50cm thickness using best quality II class table moulded chamber burnt bricks of size 9" x 4-1/2" x 3" in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)

Ground Floor

First Floor

Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 10mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two crushed sand (M-Sand) and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections.

Supplying and fabrication and fixing in position of anodised natural colour matt finish sliding window in two track in all floors with following sizes. All the three shutters with slinding arrangements, the bottom section should have Gutter arrangements so as to drain the water entering and made with extruded aluminium section for outer frames as shown below with necessary accessories such rubber beading. Aluminium clips, rubber beading,handle and fixing 4mm thick clear sheet glass including all required for fabrication etc., complete.Necessary dismantling making holes in RCC columns, beams, masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing as directed by the departmental officers.The Al.Surfaces is to be anodised with matt finish under electrically condition in accordance with ISI 1868/1962 specification for an average anodic film thick of not less than 15 microns.

Supplying and fixing in position of alulminium anodised colour matt finish Louvered Ventilator. The outer frame will be 62x38x2mm @ 1.17 Kg / m and the louvers with moving arrangements will be made with Alu. Channel of size 60x30x4 mm @ 1.27 kg /m with necessary glass pans for louvers 4mm thick Al. Clips, including all materials, labour & power consumption charges required for fabrication if necessary chipping dismantling making holes in RCC columns,beamsor masonry wherever necessary with power drill to the extent required and make good to the original conditions after fixing etc., complete. The Aluminium sirface is to be anodised with matt finish under electrically controlled condition in accordance with ISI specification 1868/1962 of anodic film thickness of not less than15 microns (fifteen) for all sections.

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

White washing two coats using shell lime including cost and conveyance ofall materials to site and all labour charges etc comoplete for 100 Sqm

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed single core copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with Modular switch box and 5A 1M switch in flush with wall with Cover Plate sheet cover for making good of the concealed portion with suitable colour for PVC concealed modular light point/ fan point (for electronic regulator) (5 pts / coil)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed single core copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with Modular switch box and 5A 1M switch in flush with wall with Cover Plate sheet cover for making good of the concealed portion with suitable colour for PVC concealed modular light point/ fan point (for toilet / bathrooms) (6 pts / coil)

Wiring with 3 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 1M flush type modular box with cover and 5A FT 1M switch (two way) and making good of the concealed portion with suitable colour for concealed staircase light point

Supply and fixing of single box type 4' 36W LED Wall fitting complete with TW round blocks on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of single box type 4' 40W LED complete with conduit pipe suspension from ceiling with PVC unsheathed copper leads from terminals to the fitting with LED Tubes

Supply and fixing of 18W square type LED on ceiling with necessary accessories and electrical connection.

Supply and fixing of 24W square type LED on ceiling with necessary accessories and electrical connection.

Supply and fixing of 50W Low bay LED fitting on ceiling with necessary accessories and electrical connection.

Supply and fixing of 9W LED bulb for BH point with electrical connections complete.

Supply and fixing of 15watts WT bulk head fitting with guard with 15W LED bulb with electrical connections complete. (for Semi basement) (using Run of)

Supply and fixing of 1200mm sweep (48") AC ceiling fan High speed complete with stepped electronic 100W 2M regulator with 1.2 mtr down rod on the existing clamp

Supply and fixing of Cabin fan on wall mounting 300 mm sweep with necessary accessories and connections complete.

Supply and fixing of AC / DC 76mm buzzer / call bell suitable for 230 volts 50 c/s single phase AC supply on suitable TW board with push switch

Supply and fixing of 375mm (15") sweep (Heavy-duty) AC exhaust fan complete without provision of holes in the wall.

Supply and fixing of louvers shutters arrangements for 375mm (15") sweep AC exhaust fan

Supply and fixing of 2M 6A 5 Pin Socket-1 No, lM 6A Switch - 1 Nos in 3M Flush Box with cover Plate in flush with wall and connection (For Set plugs)

Supply and fixing of 16A, 3 pin switched socket 3M in Modular Flush Box and Covered with Cover plate, flush with wall and connection

Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For Geyser Plug)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure Distribution board with Double door type with metal door with IP42 protection with 1 No. 32A DP MCB as incoming and 6 Nos. 6A to 32A SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (Like Legrand make).

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure Distribution board with Double door type with metal door with IP42 protection with 1 No. 32A DP MCB as incoming and 10 Nos. 6A to 32A SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (Like Legrand make).

Supply and fixing of 63A Horizontal type 4way triple pole neutral MCB distribution board in sheet steel enclosure double door of double door type with metal door with IP 42 protection with 63A 4 pole MCB isolator as incoming, 6 nos 32A DP MCBs as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (like Legrand make)

Supply and fixing of 63A Vertical type 6way triple pole neutral MCB distribution board in sheet steel enclosure double door of double door type with metal door with IP 42 protection with 100A 4 pole MCB isolator as incoming, 18 nos 6-32A SP MCBs as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (like Legrand make)

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour

Supply and run of 4 of 6 sq.mm.(84 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour

Supply and clamping of 3½ x 25 sq.mm PVC LTUG armoured LTUG Alu. cable on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for PVC armoured 3½ x 25 sq.mm LTUG cable with earth connection.

Supply and providing cable end termination of 3½ x 25 sq.mm.PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply and laying of 2 x 6 sq.mm PVC armoured LTUG Alu. cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and clamping of 2 x 6 sq.mm. PVC LTUG armoured Alu. cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 2 x 6 sq.mm. PVC armoured LTUG cable with earth connection

Supply and fixing of 32A DP switch of 500V with metal clad with fuse and neutral (side handle) on suitable TW board with earth connection only (For Street light control)

Supply and clamping of 4 x 16 sq.mm PVC LTUG armoured LTUG Alu. cable on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for PVC armoured 4 x 16 sq.mm LTUG cable with earth connection.

Supply and fixing of 65 mm (2 ½") GI pipe (Class 'B') of 6 mt. Length with 300mm x 300mm x 6mm MS base plate, duly welded at the bottom with concreting with construction of Masonary pedestal with suitable sintex box to house 1 nos. 6-32A SP MCB etc. with suitable angle iron frame work and with supply and fixing of 1 no. 48W LED street light fitting with with cowl arrangements with1 metre of 32mm dia GI pipe (Class 'B') complete, with necessary clamps, on the above post with PVC unsheathed leads with painting of suitable colour.

Supply and fixing of 2.0 TR Split AC with 5 KVA stabilizer with copper coils 5 star rated of reputed make with required accessories and as directed by the departmental officers.

Supply and fixing of 3 phase 200A aerial fuse unit for 3 Nos. 200A fuse units (500V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work on the tapping pole with necessary clamps

Supply, Erection, Testing and Commissioning of 415V/50 Hz 200 A Cubical panel board of size of 5 feet x 5 feet x 1.5 feet with following switches, bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet with 1"x ¼ " tinned copper flats for 3 phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2 runs of 1"x 1)8" copper flat on rear side of the panel board for earth buses and with 0-500V digital Voltmeter (0-200) Digital Ammeter CT, with one set of LED pilot lamps set with fuse base, top & l0A HRC fuse link for 3 phases on a separate chamber and with the following switches complete. 1) 200A TPN Double Break switch -1 No 2) 100A TPN Double Break switch -2 Nos 3) 63A TPN Double Break switch - 4 Nos. 4) 32A TPN Double Break switch - 3 Nos. and S & F of 1 No Digital L&T make multifunction meter. and inclusive of Fabrication charges, Erection charges and Commissioning and with 1 No Metallic danger board with powder coated painting

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection

Earthing as per PWD standard with an earth electrode of 2 metre Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work

Supply and Fixinng of 4 Nos. Fire Buckets made out of 40 x 40 x 6mm MS Angle

Supply and Fixinng Shock Treatment Chart fixed in glass frame

Supply and Fixinng First Aid Box complete with all First Aid Medicines

Supply and fixing of Water CO2 Stored Pressure Type 9 litres capacity Fire Extinguisher as per new IS 15683 complete with control valve, gun metal cap, pressure gauge, operation sticker, discharge hose, wall mounting bracket, safety clip, etc., as directed by the Departmental Officers.

2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS

Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers

Supply and fixing of Carbon-di-Oxide Gas Type 2 kg.capacity Fire Extinguisher as per New IS15683,complete with control valve, discharge hose with horn,wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc., complete as per standard specification and as directed by the Departmental Officers.

Supply, erection, commissioning and testing of 62.5 KVA Diesel generator set with acoustic arrangements in accordance with CPCB norms, water / coolant oil cooled type engine with not less than 90 BHP for 62.5 KVA generator at 1500 rpm under NTP conditions with following specifications. The engine should have turbo charged, should be provided with air cleaner, base frame, crank case, lubricating oil, fan and fan drive, fuel and oil filters, flexible fittings, exhaust governor, hydro-mechanical gauges for fuel pressure and oil pressure, tachometer, digital water temperature gauge, charging arms, muffler, exhaust pump for fuel priming, fuel transfer, jacket with radiator engine oil, safety set ups with engine shutdown system

Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid- 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP 1 No. (d) Vertical Pump 2-9, 2.00 HP/Single Phase 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA)- 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20" Filter with Housing - 1 No., Low Pressure Switch- 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. RO of 250 litres

Supply, erection, Testing and commissioning of 13 passengers lift Gearless without machine room as per standard specifications. (SR)

THREEKAY BUILDERS