PROVISION OF BUILDING FOR NEW OXYGEN FILLING FACILITIES FOR OPERATION OF HIGH PRESSURE EQUIPMENTS AT EKM COMPLEX AT NAD KARANJA

Amount

SCH 'A' PART - I : BUILDING AND STRUCTURE Total of Schedule 'A' Part-I B/F from Serial Page No. (18)

SCH 'A' PART-II : INTERNAL WATER SUPPLY Total of Schedule 'A' Part-II B/F from Serial Page No. (19)

SCH 'A' PART-III : INTERNAL ELECTRIFICATION Total of Schedule 'A' Part-III B/F from Serial Page No. (21)

SCH 'A' PART-IV : SEWAGE DISPOSAL: Total of Schedule 'A' Part-IV B/F from Serial Page No. (22)

SCH 'A' PART-V : AREA DRAINAGE Total of Schedule 'A' Part-V B/F from Serial Page No. (23)

SCH 'A' PART-VI : CHAIN LINK FENCING Total of Schedule 'A' Part-VI B/F from Serial Page No. (26)

SCH 'A' PART-VII : EXTERNAL WATER SUPPLY Total of Schedule 'A' Part-VII B/F from Serial Page No. (27)

SCH 'A' PART-VIII : LIGHTNING PROTECTION Total of Schedule 'A' Part-VIII B/F from Serial Page No. (28)

SCH 'A' PART-IX : ARBORICULTURE Total of Schedule 'A' Part-IX B/F from Serial Page No. (29)

SCHEDULE 'A' PART-X : MISCELLANEOUS WORKS

S & F concealed stop cock, 15 mm bore, quarter turn with adjustable wall flange all as specified and as directed.(Make : Jaquar Model No. CQT-23083 or equivalent in Crabtree/Kohler)

S & F Pillat cock, 15 mm bore, long neck with aerator all as specified and as directed (Make : Jaquar Model No. CQT-23021 or equivalent in Crabtree/Kohler)

M&L for flame proof point wiring complete using proper colour coding, 1100 volts grade, 2.5 sqmm, PVC insulated FRLS, unsheathed wire with multi- stranded copper conductor confirming to IS: 694, Part I, ISI marked in and including ERW rigid steel conduit (heavy duty) not less than 25 mm dia, ISI marked with all FLP fittings / accessories such as bend, inspection elbows, union, nipple, 2/3/4 junction boxes etc.concealed in wall / ceiling / floor / roof etc, and PVC insulated, FRLS, unsheathed, 1100 volts multi-stranded copper conductor green colour as continuous earth wire 2.5 sqmm connected to common earth dolly all as specified and directed.

BLANK

S&F LED flame proof 1x20watt luminaries in die cast aluminium housing complete including wire gurad etc, complete in all respect and having with ceiling / wall mounting as mentioned in drawing, making necessary electrical connectios and testing complete all as specified & directed. Make:- Shyam Switchgear Ltd/ Sudhir / Baliga / Flexpro / Crompton Greaves

S & F flame proof wheather proof switch socket and plug combined 16 Amps in LM-6, single phase 250 Volts 2 pin with plug and earth complete. (Make:- Shyam Switchgear Ltd Cat Part SSPL/SS/1010 or equivalant in Sudhir / Baliga/Flexpro)

S&F and connect FLP-WP switch socket and plug combined in LM-6, 32 Amps, 500 volts, 4p+Earth ISI marked including all fitting arrangement as per site requirement complete all as specified and directed. (Make: Shyam Switchgear Ltd. Cat Part No-SSPL/ SS/1010/ equivalent in Sudhir / Baliga/Flexpro)

S & F flame proof wall mounting fan size 610 mm ( 24") 1440 RPM, 13000 CFM, single phase, 220 Volts as per Shyam Switchgears Ltd Cat Part No. SSPL/WMF/140 or equivalent in Sudhir / Baliga/Flexpro) complete all as specified and directed.

S&F connect FLP-WP isolator with direct entry single pole on/off 10 Amps 230 volts (ISI marked) including all fitting arrangement as per site requirement complete all as specified andas directed. Make:- Shyam Switchgear Ltd, Cat Part No. SSPL/RI/146, or equivalent in Sudhir / Baliga/Flexpro)

Supply and fix flame proof bulk head luminaire 150 watt , epoxy finish LM6 aluminium housing with heat resistant and toughened flat glass cover, integral, prewired complete set including GLS lamp 150 watt, mounting bracket made of MS flat to required shape along with MS clamps , bolts & nuts for fixing the bracket to the wall including necessary electrical connections all as specified & as directed. (location as shown on drawing) (Make :- Bajaj Cat Part No. BJFB 150/200ES (LM6) oror equivalent in Shyam/Sudhir / Baliga/Flexpro)

Supply and fix FLP/WP sheet metal enclosure ,double door, vertical type MCB DB, TPN ,415 Volts, AC, 50 Hz, 12 way complete with 200 Amps rated bus bar, DIN channel and neutral link, suitable for mounting MCB 32 to 63 Amps and isolator /switches inclding fixing arrangement for mounting on wall outside of the building with MS angle frame, including one MCCB 40 Amps rating 16 kA as incomer complete all as specified & as directed .

SCHEDULE 'A' PART XI : HOT CRANE

Supply, installation, testing and commissioning Hand operated overhead travelling crane (HOT), flame proof, indoor type, heavy duty class - II, floor operated of the following specifications (Note: The crane shall be provided all as described here-in-below, specified in particular specifications and in Annexure 'A' to Particular Specifications) :- (a) Capacity of crane - 3.0 ton single gantry (b) Clear span - 12.00 Mtrs (c ) Bay length - 15.00 Mtrs (d) Hook height - 4.00 Mtrs (e) Longitudinal speed - 30 cm per pulling, effort movement (f) Cross travel speed - 10cm per pull over chain block wheel against effort arm chain movement of 50 cm pulled by one person on full SWL.

HOT Crane shall comprise of the following components:- (i) Crane girder made out of MS I section size ISMB- 450mm x 150mm, single length. (ii) Rail square bar 50mm x 50mm for long travel movement to be fixed on existing girder with ISMC channel 200 mm including welding, assembling complete. (iii) Solid long shaft of MS heavy duty pipe of dia 32mm with 6 Nos pedestal bearing and fixed to MS I section 450mm x150mm medium channel 65mmx 40mm by welding for longitudinal movement. (iv) Side wheels shall be made of brass for long travel movements. (v) Chain pulley block suitable for 3.00 MT capacity alongwith geared trolley flame proof for cross travel, suitable chain, lift hook of suitable capacity complete (vi) Ideal drive wheel on long shaft along with suitable size of chain for long travel of HOT crane. (v) Gantry Girder as inscope of building work & cap channel to rail of bottom side included into quoted rates

Jai Ambay Construction