Construction of for 54 Nos Capacity Annathanakoodam in Arulmigu Kasinathaswamy Temple at Ambasamudram Nager and Taluk in Tirunelveli District.

Amount

Earth work excavation for foundation in all classes of soils and sub soils and todepth as may be directed except in hard rock, requiring blasting, including initial leads and lifts and re-filling the sides of foundation, with excavated earth in 150mm layers well watered rammed and consolidated, including depositing surplus earth clearing and levelling the site, shoring shuttering baling out water wherever necessary etc., complete complying with standard specification.

Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and filling in foundation and basement with Gravel in layers of not more than 15cm thick well rammed watered and consolidated etc.,

Cement concrete 1:5:10 (one cement five sand ten aggregate) using 40mm gauge hard granite broken stone jelly for foundation including cost and conveyance of all materials labour for mixing,l aying, compacting, curing, dewatering, side shuttering, wherever necessary including curing etc.,complete complying with standard specification and as directed.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

Column /footing, Grade beam Etc

Providing form work for centring the soffits of all reinforcement cement concrete surfaces M.S.Sheets of 90 x 60cm x 10 gauge stiffened with welded M.S angle of size 25x25x3mm laid over silver oak joints of size 10cm x 6.50cm spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at 75cm centre to centre complying with standard specification and as directed.

For plane surfaces such as Rcc Roof slab, beams,Lintels,bet blocks,landing slab, portico slab, beeams etc.,

For Column and Sunshade

Curved centeing for kodungai:

Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000,using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimumcement content of 325 kg/mᶾ and maximum water cement ratio of 0.55, including admixture (plasticiser /super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete,improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mmmachine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jellyand with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricatingcharges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing,curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary withoutclaiming extra, etc., complete complying with standard specification and as directed by the departmentalofficers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards.(No separate payment will be made by the Department for the excess usage of materials).

For foundation and Basement:

Above Basement level up to 3.60m height:

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Dry stone brick work using country bricks of size 8 3/4" x 4 1/4" x 2 3/4" including cost of all materials and labour charges etc..complete.

Brick work in following Cement Mortar 1:6 using Country Bricks of size 8 3/4" x 4 1/4" x 2 3/4" for foundation and basement including curing, etc., complete complying with standard specifiction.

Foundation and basement in cm 1:5

Above basement level up to 3.60m height in cm 1:6

Brick masonry in c.m 1:4, using stock bricks including all vaarivargams, moulds, sthambams, mukhapathramsa, koodu, nasi and all ornamental birck work complete, all pancharams, agarais, karnrakoodus, etc., forming core wlls of Rajagopurams/vimanams complete including cost and conveyance of all materials including cement, all the labour charges including marking pathies shaping of the bricks, lifting of all the materials to required hts curing and all extra for working in hts etc., complete – 100cft.

Brick Partition wall in CM 1:3 (one cement and Four sand) 110mm thick using best quality Country Bricks of size 8 3/4" x 4 1/4" x 2 3/4" for walls incluing cost and convetance of all labour andmaterials including scaffolding curing finishingetc., complete complying with standard specification and as directed.etc., complete

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Providing Weathering Course Concrete to an average thickness of 8cm with20mm size Broken brick jelly in lime mortar over roof slab including laying, consolidating, finishing etc., complete.

Finishing the Top of Roof with One course of machine Pressed Tiles 200 x 200 x 20mm in C.M.1 : 3 - 12mm thick mixed with Water Proofing Compound,Red oxide and pointing with same mortar etc.,

Paving the floor with kota stone slab of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (one cement three sand), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Paving the floor with concrete anti-skid tiles to Required shape and design of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Supplying and fixing of best quality 110mm Dia PVC rain water pipes including cost and conveyance of all materials and labour charges for fixing in position etc., complete.

supplying and fixing of Teak wood frames including Labour wrought and put upt as per standard specifications.

Supplying and fixing of Flush door shutter Single leaf in position using 35mm thick solid core Flush shutters with commercial ply on both sides with teak wood lipping alround including cost and labour for fixing the hold fasts and furniture fittings etc.,complete as directed by the departmental officers complying with standard specification.

Supply and fixing of Teak Wood glazed window with outer frames of size 3" x 21/2" and shutter frames of size 21/2"x11/2" and glass panels of 4mm thick. The rate includes cost of materials manufacutering and fixing at site.

Supplying and fixing mild steel grill Gate including cost conveyance of all materials and fixing in position including priming coat etc complete with standard specifications.

Painting two coats with cement paint of first class quality and approved colour, including priming coat and through scrapping and clean removal of dirt etc., complete as per standared specification.

Painting two coats of newly plastered wall surface with Water based Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting new iron works such as gate, steel doors windows ventilators with two coats of approved quality and color of synthetic enamel paint over the existing red oxide primer and one coat of zinc chromite in all floor etc, complete complying with standard specifications.

Supplying and fixing of Cudppah Slab of 50 mm thick for the Cup Boards including labour charges for fixing Cudappah Slab to the Cub Boards as directed by the Departmental Staff.

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Supplying, laying and joining the following size of PVC pipes 10 kg / Sqcm of approved quality and best verity conforming to ISS and with ISI Mark laid properly to alignment including cutting, threading and fixing PVC specials but excluding the cost of such specials and fixing to the wall with necessary TW plugs, PVC clamps and screws, making holes on the wall or drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work, concrete and plastering wherever necessary with necessary scaffolding charges etc., complete.

a) 32mm dia PVC pipes

b) 25mm dia PVC pipes

c) 20mm dia PVC pipes

Supplying and fixing in position of 15mm dia brass chromium plate screw down tap excluding cost of fixing materials etc, complete and as per standard specification.and including cutting and threading wherever necessary etc., complete complying with standard specification etc., complete.

Supplying and fixing in position first quality and approved variety of Gun metal Gate valve/Wheel Valve/check valve/Push cock/Push cock(Heavy type) with ISI mark of the following sizes including cost of shellac, thread etc., complete complying with std specification for both internal and external water supply arrangements etc., complete complying with std specification and as directed by the departmental officers

a) 32mm dia Gate value

b) 25mm dia Gate value

c) 20mm dia Gate valve

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications and as directed by the departmental officers

110mm dia PVC ELBOW

75mm dia PVC ELBOW

110mm dia PVC TEE

75mm dia PVC TEE

110mm dia PVC BEND

75mm dia PVC BEND

Supply and fixing in position best quality PVC Soil/ waste pipes of various size having ISI mark and providing leak proof joints including fixing to the wall with special PVC /MS clamps, etc., and making connection to all sanitory fittings, dismantling masontry / RCC works wherever necessary and making good the dismantled portion to the original condition, complying with standard specification etc., complete.

110mm dia PVC Soil/ waste pipes

75mm dia PVC Soil/ waste pipes

Supply and Fixing PVC water tank of 1000lit including cost of all materials and labour charges etc., complete

Supplying and erecting in position of following 50 liters capacity Industrial Model Reverse Osmosis Water-cum?Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact

Sub total

RAVICHANDRAN (BID ID -1429669)