REPAIR TO SECUTIRY LIGHTS , PANELS , DG SET AT AF STN BIKANER UNDER GE (AF) NAL

Amount

Excavation in trenches in soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5m depth, getting out the excavated earth, forming bottom surfaces to required gradient complete all as specified and directed by Engineer-in-Charge.

Removal of excavated material soils to a distance n exc 50 m and depositing where directed at a level not exceeding 1.5m above the straight point

Returning filling in, including spreading, levelling watering and well ramming in layers n exc 25 cm as in any type of soil.

Material and labour for sand cushioning using dry and clean tibba sand in two layers, first layers of 80mm thick before laying of cable and second layer of 150mm thick after laying of cable in trenches/ducts including consolidation of each layers complete all as specified and directed.

Supply & Laying bricks using sub class ‘B’ bricks (old size) for cable protection laid flat and dry in trenches over cable perpendicular to direction of cable, complete all as specified and directed by Engr-in-Charge.

Taking out defective cable XLPE/PVC sheathed 1100 volt grade heavy duty armoured with aluminium conductor from trenches shifting serviceable cable for relaying and depositing unserviceable cable in store yard of AGE B/R (AF) BKN located at a distance of 1.5 KM( Approx) complete all as specified and directed for the following:-. Note : Excavation and earth work shall be measured and paid for separately under relevant item

All as per item no 06 above 2 core 10 Sqmm

All as per item no 06 above 4 core 16 Sqmm

All as per item no 06 above 3.5 core 25 Sqmm

All as per item no 06 above 3.5 core 35 Sqmm

All as per item no 06 above 3.5 core 50 Sqmm

All as per item no 06 above 3.5 core 95 Sqmm

Supplying, laying, jointing and testing of under ground cable XLPE insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor 2 core 10 Sqmm laid in trenches/duct/pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed by Engr-in-Charge

All as per item No 13.00 but size 4 core 16 Sqmm.

All as per item No 13.00 but size 3.5 core 25 Sqmm.

All as per item No 13.00 but size 3.5 core 35 Sqmm.

All as per item No 13.00 but size 3.5 core 50 Sqmm.

All as per item No 13.00 but size 3.5 core 95 Sqmm.

Material and labour for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick, buried directly in ground, vertically to a depth not less than 2.25 mtr deep below ground level with top edge of the earth plate at depth not less than 1.5 mtr below ground level earth plate surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, earth GI strip of size 32x6mm by means of bolts, nuts, check-nuts and washers of galvanized iron and thimbles and of earth wire protected by galvanized iron pipe light grade 15mm bore and water pipe 20 mm bore GI medium grade with funnel and wire mesh complete including excavation and earth work, PCC chamber and cover in cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate in lieu of CI cover and frame etc all as specified and shown in electrical plate No. 3 of SSR-2009 (Part-I).

M & L for comprehensive maintenance for a period of 09 months of a DG set of capacity 320 KVA comprising diesel engine ,AMF panel and micro processor based control panel. however on monthly basis one electrician and one DG set mechanic (authorised rep of OEM) will visit the site and entire monthly check shall be carried out to the satisfaction of Engineer-in-chargeTaking down the unserviceable spares / parts required for the periodical service / maintenance of 320 KVA DG Set 415 volts 3 phase 4 wire 50HZ. Draining out the old engine oil, filling of new engine oil, top up of coolant, cleaning and washing the oil sump with kerosene oil to make it free from dust and unwanted particle. Cleaning of radiator thoroughly with soda ash powder, top up of coolant, greasing and lubricating all mobile parts and making it fully functional and testing the same on full load in the presence of Engineer - in - Charge. Note : (a)Spares parts/engine oil and coolant required for replacement shall be measured and paid separately under relevant item of schedule. (b) Contractor shall detail technician to attend breakdown of any type with in the period of contract i.e. 272 days inclusive of all Sundays and holidays. (c) Minor parts required also included in the rate quoted.

Supply only for 320 KVA DG Set 415 volts 3 phase 4 wire 50HZ the spares / parts followings(22 to 30) :-

Air Filter Make : Bosch/fleetguard/Doossan

Oil filter Make : Bosch/fleetguard/Doossan

Fuel filter (Primary) Make :Bosch/fleetguard/Doossan

Fuel filter (Secondary) Make : Bosch/fleetguard/Doossan

Oil pressure pipe

Hose pipe (Water pump inlet/outlet)

Solenoid switch.

Automatic voltage regulator suitable for 320/400 KVA DG Set

Hose Pipe (Fuel / Radiator)

Repair and Maint of fuel injector pump of 320/400 KVA DG Set 415 volts 3 phase 4 wire 50HZ, by dismantling of fuel injector pump striping out of each of unserviceable parts, PT pumb repair kit, gear pump assembly replacement of unserviceable parts and reassembling the FIP including calibration and pressure testing computerize for each FIP from mico service station including replacement of the following items:- (i) PT Pump repair Kit Cat Part No.3880584 – 01 No (ii) Gear pump assembly Cat Part No.T-30344229– 01 No

Dismantling of self starter 24 volts of 320 KVA/400 KVA DG Set 415 volts 3 phase 4 wire 50HZ opening and segregating cleaning the serviceable parts for re-use, self starter servicing and greasing, re-assembling the self starter and replacement of following parts :- (i) Carbon bush – 01 Set (ii) Brass plunger - 01 No (iii) Solenoid switch - 01 No (iv) Body Brass Nut – 04 Nos

M & L for comprehensive maintenance for a period of 09 months of a DG set of capacity 400 KVA comprising diesel engine ,AMF panel and micro processor based control panel. however on monthly basis one electrician and one DG set mechanic will visit the site and entire monthly check shall be cariied out to the satisfaction of Engineer-in-charge .Taking down the unserviceable spares / parts required for the periodical service / maintenance of 400 KVA DG Set 415 volts 3 phase 4 wire 50HZ. Draining out the old engine oil, filling of new engine oil, top up of coolant, cleaning and washing the oil sump with kerosene oil to make it free from dust and unwanted particle. Cleaning of radiator thoroughly with soda ash powder, top up of coolant, greasing and lubricating all mobile parts and making it fully functional and testing the same on full load in the presence of Engineer - in - Charge. Note : (a)Spares parts/engine oil and coolant required for replacement shall be measured and paid separately under relevant item of schedule. (b) Contractor shall detail technician to attend breakdown of any type with in the period of contract i.e. 272 days inclusive of all sundays and holidays. (c) Minor parts (cost upto rs 1000) required also included in the rate quoted.

Supply only for 400 KVA DG Set 415 volts 3 phase 4 wire 50HZ the spares / parts followings(35 to 45 ):-

(a). Air Filter Make : Kirloskar/Bosch/Mico

(b). Oil filter Make : Kirloskar/Bosch/Mico

(c). Fuel filter (Primary) Make : Kirloskar/Bosch/Mico

(d). Fuel filter (Secondary) Make : Kirloskar/Bosch/Mico

(e). Oil pressure pipe

(f). Hose pipe (Water pump inlet/body outlet)

(g). Solenoid switch.

(h) Hose Pipe (Fuel / Radiator)

(j) Relay card

(k) V-Belt

(l) water pump

Taking out unserviceable and supply & fixing new controller actuator (Governor control unit ) suitable for 320/400 KVA DG Set.MODEL: DWC-2000 , INPUT- 24 V, PARTS NO.- 65.11220-7008

M & L for comprehensive maintenance for a period of 09 months of a DG set of capacity 20/30/62.5/82.5/125 KVA comprising diesel engine , AMF panel and micro processor based control panel however on monthly basis one electrician and one DG set mechanic will visit the site and entire check shall be cariied out for checking out serviceability and including taking down the unserviceable spares / parts required for the periodical service / maintenance of 20/30/62.5/82.5/125 KVA DG Set 415 volts 3 phase 4 wire 50HZ and draining out the old engine oil, filling of new engine oil, top up of coolant, cleaning and washing the oil sump with kerosene oil to make it free from dust and unwanted particle. Cleaning of radiator thoroughly with soda ash powder, top up of coolant, greasing and lubricating all mobile parts and making it fully functional and testing the same on full load in the presence of Engineer - in - Charge. Note : (a)Spares parts/engine oil and coolant required for replacement shall be measured and paid separately under relevant item of schedule. (b) Contractor shall detail technician to attend breakdown of any type with in the period of contract i.e. 272 days inclusive of all sundays and holidays. (c) Minor parts(over all cost upto Rs 1000 ) required also included in the rate quoted.

Supply only for 20/30/62.5/82.5/125 KVA DG Set 415 volts 3 phase 4 wire 50HZ the spares / parts followings( 49 to 61):-

(a). Air Filter Make : Bosch /Mico/Leyparts

(b). Oil filter Make : Bosch /Mico/Leyparts

(c). Fuel filter Make : Bosch /Mico/Leyparts

(d). Oil pressure pipe

(e). Hose pipe (Water pump inlet/outlet)

(f). Solenoid switch.

(g) Battery charger 12 V.

(h) Display unit for controlling the DG Set in Manual/Auto

(j) Hose Pipe (Fuel / Radiator)

(k) Relay card

(l) V-Belt

(m) water pump

(n) Water pump with body (complete assy)

Repair and Maint of fuel injector pump of 20/30/62.5/82.5/125 KVA DG Set 415 volts 3 phase 4 wire 50HZ, by dismantling of fuel injector pump striping out of each of unserviceable parts, PT pumb repair kit, gear pump assembly replacement of unserviceable parts and reassembling the FIP including calibration and pressure testing computerize for each FIP from mico service station including replacement of the following items:- (i) PT Pump repair – 01 No (ii) Gear pump assembly 01 No

Supply only the followings:-

Distilled water

Battery Terminal

coolant for Radiator of DG Sets

Engine oil 15 W 40 grade

M&L for boring of road crossing of size 80mm dia using trenchless technology for laying of cables / pipe lines etc. complete all as directed.

Supply,fixing and testing in repair outdoor type dust & vermin proof type AMF Panel for DG Set of Capacity 20 KVA with two number MCCB 4 pole 63 Amp 25 KA , double contactors and accessories, battery charger 12V DC, timer, coil with all control circuit for auto ON/OFF etc housed in a outdoor type panel cabinet made of 3 mm CRCA sheet duly powder coated of size to accomodate the above mentioned MCCBs, relays, contractors,timers,busbars with properly insulated aluminium bus bar of size as required, prewired complete and fixed on an angle iron of size 50x50x6mm thick 600mm long to be fixed on ground with proper PCC for foundation and coping including necessary wiring required complete all as specified and directed.

Supply & Fixing in repairs Pressure die cast aluminium housing, Heat resistance toughened glass, IP66 protection, better optics for uniform distribution LED street light fitting of 45 watt capacity complete with electrical connections from pole to light fitting by using new twin core aluminium cable.

S&F in repairs Pressure die cast aluminium energy efficient LED street 25 watt fitting complete with electrical connections.

Supply & Fixing in repairs GI brackets for mounting street light fittings made out of medium grade 32 mm dia , 1.5 m lenth GI pipe and have an angle of 120 degree including fixing arrangement i.e. clamps, nuts, bolts etc complete all as specified and directed.

S & F in repairs Mild steel work in framed work such as straps, Ties Clamps, Motor pumpset base, sheet roofs etc., and similar work confirming to Fe 410 - O and incl painting to surfaces using two coats of metallic primer and a coat of synthetic enamelled paint of desired colour as directed.

M & L for PCC 1:3:6 type C-2 (using 40 mm graded aggregate) as in foundations, filling and mass-concrete , coping etc complete all as specified and as directed.

Taking down U/S street / road / security / high mast light of any capacity / type from poles / walls at height upto 10 m etc including removal of connection using labour / machinery equipments for the repair / maint or deposited to the store yard and refixing/fixing the light after necessary repair on its original position. Note : All spares / parts required for repair will be measured and paid relevant item of schedule.

S & F as in repair analog time switches( Micro Rex Qt31- daily time switch) and make it fully functional all as specified and as directed. Make- legrand/L&T/ Schinder

Supply only the following spares/ parts :-

Power Contractor 3 Pole 40Amps 415 Volts 50HZ Type ML-3. Make L&T/Equivalent Legrand/Seimens.

Power Contractor 3 Pole 70Amps 415 Volts 50HZ Type ML-4 Cat No SS90721 Make L&T/Equivalent Legrand/Seimens.

LED Driver as per existing in site suitable for 45W street light LED fittings Make : Havells Cat Part No LHETAXU7PN6J045

LED Driver as per existing in site suitable for 45W street light LED fittings Make : HPL

LED Driver as per existing in site suitable for 20W security light LED fittings Make : HPL

LED Driver as per existing in site suitable for 60W flood light LED fittings Make : HPL

LED Driver as per existing in site suitable for 100W flood light LED fittings Make : HPL

S&F in repair battery of 12 V 90 AH complete with copper lead and terminal for connection all as specified and directed.

S&F in repairs battery of 12 V 180 AH complete with copper lead and terminal for connection all as specified and directed.

Supply and fixing in repairs cylindrical shape, Pressure die cast powder coated housing with PC diffuser, efficient high output COB LED for Garden, Pathway etc lighting IP-66 protection of capacity 10W complete with electrical connections with new 3 core wire all as specified and directed. Make : CG Cat Part No LBLA1-10-CDL or equivalent in Bajaj / Havells .

S&F as in repairs IP 65 rated LED Post top ideal to lit up parks, garden ways, efficient light distribution 20W capacity, incl electrical connection using 3 core wire all as specified and directed. MAKE : Crompton Greaves Cat Part No. LPTH-20-WW or equivalent in Philips / Havells.

Supply & Fixing in repair LED Driver suitable for garden light of make CG Cat Part No : LBLA2-10-CDL.

Supply & Fixing in repair LED Driver suitable for garden light of Make CG Cat Part No : LBLA1-10-CDL.

Supply and Fixing in repair LED flood light IP 65 PDC aesthetically designed with better thermal management of capacity 100W with complete accessories and duly prewired by using new 3 core 1.5 sqmm cable incl testing. Note :- The fitting will be fitted after executing the following jobs :- (a) Lowering the existing high mast lights ring with existing handle or by using motor. (b) Disconnecting all the electric connections of existing unserviceable sodium high mast lights. (c) Fixing the new LED floodlights, fitting by using nuts & bolts on high mast rings. (d) Testing the all LED fittings and uppering the high mast ring by using existing handle or by using motor.

Supply and Fixing in repair LED flood light IP 66 PDC housing heat resistant tempered glass for protection with 5KV surge protection of capacity 200W with complete accessories and duly prewired by using new 3 core 2.5 sqmm cable from junction box to LED fitting incl testing. Note :- The fitting will be fitted after executing the following jobs :- (a) Disconnecting the electric connections and Lowering the existing unserviceable Watch Tower lights or any other location and at any height by using machinery equipments. (b) Fixing the new LED floodlight fitting of 200W by using nuts & bolts on watch tower poles or any other location as per existing .

M&L for servicing of Air circuit breaker of following capacity. Note:- (i)unit quoted rate includes the rate of minor part(upto Rs 500.00) and oil required to make it fully functional.(ii)All T&P required shall be arrange by the contractor on his own arrangement.

ACB In 1000 amp make :- L&T , Cat part-CN-CS 1000 S1

ACB In 800 amp make :- L&T , Cat part-CN-CS 800 S1

ACB In 630 amp make :- L&T , Cat part-CN-CS 630 S1

Supplying and laying in repairs GI tubing light grade incl all accessories for encasing cables for mechanical protection, laid under Plinth / Floors/ Paths Culverts or fixed on wall or concealed in wall/floor or along poles or as street light poles or as street light mounting bracket with complete accessories such as bends/sockets/reducers/saddles incl necessary threading/drilling works all as specified and directed of sizes. Note :- MS works will be measured under separate item in Schedule.

80 mm bore

50 mm bore

40mm bore

S&F in repair LT Cable joining kit straight through heat shrinkable type complete with joining materials suitable for LT Armoured cables of size upto 50 Sqmm 3.5 core all as directed.

S&F in repair LT Cable joining kit straight through heat shrinkable type complete with joining materials suitable for LT Armoured cables of size 70-120 Sqmm 3.5 core all as directed.

S&F in repair LT Cable joining kit outdoor end termination heat shrinkable type joint complete with jointing material and accessories suitable for LT Armoured cables of size up to 50 Sqmm 3.5 core all as specified and directed.

S&F in repair LT Cable joining kit outdoor end termination heat shrinkable type joint complete with jointing material and accessories suitable for LT Armoured cables of size 70-120 Sqmm 3.5 core all as specified and directed.

M&L as in repair heavy duty double break fuse switch HBC/HRC fuse type TPN 415 Volts 200 amps capacity with 03 Nos HRC fuse link complete all as specified and as directed.

Dismantling of damaged steel tubular/PCC pole of size 9 mtr for disposal all as specified and as directed. Note :Unit rate of this item includes the cost of dismantling of PCC and excavation and earthwork complete as directed.

Supply, installation and erection steel tubular swaged welded poles 9 m,in true vertical position complete with MS base plate of 6 mm thick of size 300mm x 300mm, finial taper plug, pole cap, bolts, nuts and washers and screwed, pole made out of ERW MS tubing conforming to IS-2713 ( Part II),1980 type 410-SP-31, 9 meters long L.T pole including drilling of holes of required size and Nos for fixing of cross arms, painting with one coat of red oxide primer and two coats of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embedded in concrete, painting with two coats of aluminium paint over a coat of primer incl excavation incl PCC complete in post hole in any type of strata, PCC 1:2:4 foundation, filling, in post holes with PCC 1:3:6 and cylindrical coping with PCC 1:2:4 of size .45x.3 complete all as specified and directed. Note : Unit rates of this item includes the cost of PCC in foundation, PCC coping and excavation and earthwork.

Material and Labour for earthing complete with copper plate electrode 60 cm x 60 cm x 3.15 mm thick, buried directly in ground, vertically to a depth not less than 2.25 meter deep below ground level with top edge of the earth plate at depth not less than 1.5 meter below ground level earth plate surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, earth lead copper strip 20 mm x 3 mm by means of bolts, nuts, check-nuts and washers of galvanised iron and then brazing the copper strip joints and thimbles of earth wire and water pipe 20 mm bore GI medium grade with funnel and wire mesh complete including excavation and earth work, PCC chamber and cover in cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate in lieu of CI cover and frame etc all as specified and shown in electrical plate No. 3 of SSR-2009 (Part-I) and colour coding the earthing including taking out the old unserviceable earth plate complete all as specified and as directed. Note : (i) Copper strip fixed more than 2 meters will measured and paid separately. (ii) Colour coding of earthing to be indicated on cover of earth plate by painting according to the type of earth plate all as specified and as directed. (iii) Earth value to be measured and necessary resistance value to be brought down below 1 ohm. (iv) Marking of the earth pit should have the type of earthing, no of the earth pit and the total number of particular type of earthing for that bldg/equipment. for eg:- a lightening earth pit can be marked as LA-1/4 which means lightening arrestor earth pit No 1 out of total 4 LA earth pits for the bldg equipments.

Material and Labour for copper strip of size 20 mm x 3 mm complete including taking out the old unserviceable strip of any type, complete all as specified and as directed.

Supply and fix OFF LOAD change over switch 415V ,50 Hz 4 pole of capacity 200 Amps including taking out the old unserviceable change over switch, complete all as specified and as directed.

Supply and fix OFF LOAD change over switch 415V ,50 Hz 4 pole of capacity 125 Amps including taking out the old unserviceable change over switch, complete all as specified and as directed.

Supply, install, testing and commissioning as in replacement outdoor type factory made, made out of 3.00mm thick CRCA Sheet CPRI test certified, platform mounted LT panel board to accommodate the following items and built upon angle iron frame suitable size compartmentalized design work, duly powder coated with gray paint and suitable size of cable glands chromium plated and Aluminium busbars TPN, 400 Amps,415 V,50 Hz complete as following :- (i) MCCB 200 Amps, 4 Poles, 36 KA rupturing capacity - 01 No (incoming) (ii) MCCB 100 Amps, 4 Poles, 16 KA rupturing capacity - 01 No (outgoing) (iii)MCCB 63 Amps, 4 Poles, 16 KA rupturing capacity - 02 No (outgoing) (iv) Indicating lamp LED RYB set of three with colour codeing - 1 No. Note : Unit rate of this item also includes the following :- (a) For fixing the Panel excavation and earthwork involved shall be carried out by the contractor as directed. (b) After errection / fixing of panels, all connection shall be made by the contractor as directed.

Material and labour for painting above the copping upto 1.5 mtr in alternatively black and white strips of 30 cm each & rest of the portion with two coats of silver/aluminium paint on steel tubular LT pole of any height after scrapping/removing the existing paint and the preparation the surface of steel tubular pole LT including painting of the channel cross arms, nut, bolts & washer, street light bracket and clamps complete all as specified and directed

Material and labour Spray painting front and back side of panel size 1.20mX1.20m and two side of size 1.20mX0.50m and top surface of LT panels with two coats of synthetic enamel paint after scraping, removing of old paintcomplete all as specified and directed.

Supply and fixing in repair PVC cable end terminal box outdoor type, 14 x 14 cm, PVC door, provision for cable incoming and outgoing from bottom, comprising of one MCB SP 6-32 Amps cable glands suitable size and one porcelein connector four way complete fixed on wall/pole.

Material and labour for repair to engine of DG set of capacity 320 KVA including dismantling from its original position and opening head assembly with replacement of necessary part(will be measured and paid seperatly under respecitve item )complete. Make: Kirloskar Note: Any other parts required(upto Rs 2000) for overhauling other than mentioned below required for smooth functioning of DG set shall deemed to be included in quoted rates.

Supply only following items(118 to 129):-

Radiator overhauling and servicing

Control wiring and associated work

Replacement of Liner (Make: Kirloskar)

Piston (Make: Kirloskar)

Gudgeon Pin (Make: Kirloskar)

Piston Ring Set complete (Make: Kirloskar)

Valve Seal (Make: Kirloskar)

Oil Pump (Make: Kirloskar)

Water Pump (Make: Kirloskar)

Main Oil Seal (Make: Kirloskar)

Head Gasket complete (Make: Kirloskar)

Lathe work of engine block and cylinder head with polishing, cleaning and refixing complete work

B.K. ROY & SONS

M/s Rohit Construction Co.