Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.0 CrAccepted-AOC | ₹4.0 Cr | L1 | Accepted-AOC Being L1 |
| 2 | L2₹4.1 Cr+₹8.5 L (2.14%)Rejected-Finance 10 SHANTI VIHAR RUDRAPUR UDHAM SINGH NAGAR UTTARAKHAND 263153 | UDAM SINGH NAGAR | UTTARAKHAND | 263153 | ₹4.1 Cr+₹8.5 L (2.14%) | L2 | Rejected-Finance Other than L1 |
| 3 | L3₹4.1 Cr+₹8.8 L (2.22%)Rejected-Finance | ₹4.1 Cr+₹8.8 L (2.22%) | L3 | Rejected-Finance Other than L1 |
| 4 | L4₹4.5 Cr+₹56.1 L (14.1%)Rejected-Finance | ₹4.5 Cr+₹56.1 L (14.1%) | L4 | Rejected-Finance Other than L1 |
| 5 | L5₹4.8 Cr+₹82.1 L (20.6%)Rejected-Finance | ₹4.8 Cr+₹82.1 L (20.6%) | L5 | Rejected-Finance Other than L1 |
Tender Value
₹4.6 Cr
EMD Value
₹5.3 L
Closing Date
6 May 2022, 6:00 pmClosed
CE Lucknow Zone Lucknow
HQ CE Lucknow Zone, 17, cariappa marg, Lucknow 226002
PROVN OF TECHNICAL ACCN AT NEW CANTT ALLAHABAD
2022_MES_513893_1
CELZ/ALD/T-37 of 2021-22
Open Tender
Construction Works
Lump-sum
365 days
Allahabad
As per tender Documents
6 documents required · 6 mandatory
₹2,000
Yes
GE (P) Allahabad
₹5.3 L
Yes
29 Jun 2022
16 Mar 2022
9 May 2022
16 Mar 2022
6 May 2022
22 Apr 2022
Amount
Sch 'A' Part-I (Building Work) Note : This schedule is pre-priced by MES and the pre-priced rate indicated are under Col. 5.
Total amount of Sch 'A' Part II (Site clearance, excavation and earth work)
Total amount of Sch 'A' Part III (Internal Electrification)
Total amount of Sch 'A' Part IV (Road, Path and Culvert )
Total amount of Sch 'A' Part V (Area Drainage)
Total amount of Sch 'A' Part VI (External Electrification )
Sch 'A' Part - VII (Miscellaneous Items) Note - This Schedule as given here- in -after is not pre-priced by MES and the pre - priced rate indicated as "Rs 0.00 under col.5 siginifies this fact only.
ROAD/PATH/CULVERT M&L for hume pipe culvert of 6.00 metre long and 600mm bore class NP2 pipes and on required minimum depth & including excavation , parapet & two coats of colour wash over a coat of white wash complete all as specied and shown on drawings No- TD-575 sheet No 1/2& 2/2 dated16.09.1989.
INTERNAL ELECTRIFICATION M&L for point wiring complete with PVC insulated and unsheathed 1100 volt, FRLSH cable 1.5 sqmm (nominal area), ISI marked,multi stranded copper conductor cable including ISI marked 20mm dia medium grade PVC conduit concealed in wall , roof/floors, factory made pressed steel concealed terminal boxes not less than 1.6mm thick of reqd size and with top cover 3mm thick of plastic laminated sheets of required colour complete,including 1.5 Sqmm PVC insulated ,FRLSH cable unsheathed multi stranded copper earth wire and connecting to common earth dolly,including colour coding of cable shall be Phase-red,Neutral-black and Earth- green with all accessories and all as specified and directed for One light/Fan/Exhaust fan/Bell point controlled by one switch Note :- In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost.
All as per item No 1.02 of above but cable 1.5 Sqmm for 5 pin 5 Amp independent socket point
All as per item No 1.02 of above but cable 2.5 Sqmm for 6 pin 15 Amp independent socket point
S&F MCB SPN 40 Amp, 240 Volts 10 KA ‘C’ curve complete all as specified and directed.
S&F MCB single pole 6 to 32 Amp, 240 Volts 10 KA ‘C’ curve complete all as specified and directed.
S&F LED Building security light fitting with aluminum pressure die cast housing, high purity PC Fresnel diffuser with silicon gasket for IP-65 protection, power consumption <20 W (14W) & luminaire lumen >2500 lm and system efficiency > 120 lm/W, in built electronic driver prewired upto terminal block with driver efficiency >85% power factor >0.95 as light source with toughened glass including two core flexible copper wire of 1.5 sq mm from ceiling rose to the connector of fitting, connection wires not to be more than 2.5 in length and made out of GI tubing 35/40 mm dia /suitable dia light grade bend to shape security light fitting with necessary MS clamp 25 mm wide and 6 mm in thickness in suitable length not more than 30 CM and max length of pipe 1.5 Mtr long with one code of anti corrosive primer and two coats aluminum paint including nuts, bolts and washers complete all as specified and directed.
S&F circular slim surface LED downlighter of 20 Watts with housing made up of die cast aluminum for better thermal management, high transmitivity non yellowing PMMA diffuser for better light output and uniform light distribution without glare, power consumption <20W, luminaire lumen>1000lm, driver and accessories to be prewired, CRI>70, LED efficiency > 120 lm/W photo biological safety report as per IEC624718 & electrical insulation class I, LED life with L70 criteries -37000 hrs colour temp >6000K, Ingress protection IP-20, ambient temperature 0 to 450C, driver efficiency >85%, THD<10% as per IEC 61000-3-2, power factor >0.95, surge protection 2.5 KV, two stages isolatated constant current operated driver with range 150-270V AC and safety extra low voltage safe level <60V DC as per IEC standard with LM79 & LM80 certification.
S&F Air Circulator fans 230 volts single phase oscillating 600mm sweep suitable wall mounting complete all as specified and directed.
M&L sub main wiring of two run 2.5 sqmm single core FRLS PVC insulated, unsheathed multistranded copper conductor cable 1100 Volt grade, drawn through and including PVC conduit medium duty and accessories of size not less than 20 mm size ISI marked including all conduit accessories for concealed to the surfaces of the wall/ceiling including one run of 2.5 sqmm single core FRLS PVC insulated unsheathed copper earth continuity conductor all as specified and as directed. NOTE : (Two runs of single core cable with one run of earth continuity conductor including PVC conduit accessories shall be measured and paid as one unit length.) including making good disturbed surface all as specified and directed.
EXTERNAL ELECTRIFICATION Supply, installation, testing and commissioning electrical cubical control panel board an ISO: 9001 factory assembled made outdoor type feeder pillar box double door type wheather and vermin proof fabricated of 3.0 mm CRCA MS sheet of Suitable size, 3 phase 4 wire 415 Volt ac 50 Hz complete duly painted with powder coating complete with locking arrangement, earthing terminals including incoming and outgoing cables connections with suitable cable glands and lugs including grouting of feeder pillar box 60 cm above ground level by providing 90 cm long angle iron size 50x50x6mm welded onall four corner embedded in PCC (1:2:4) using 20mm graded upto 30cm complete all as specified and directed. Feeder piller box shall be consisting the following :- (a) 4 Nos electrolytic aluminium bus bars high conductivity aluminium alloy proper insulated of 1 ½ times of the incoming capacity with provision of extension and mounting on porcelain support (b) MCCB FP 40 Amps, 16 KA , 415 volts, Adjustable Thermal and fixed magnetic type = 01 Nos (Incoming) (c) MCCB FP 16 Amps, 16 KA , 415 volts, Adjustable Thermal and fixed magnetic type = 04 Nos (Outgoings) (d) RYB indicating lamp, LED type 01 sets. (e) Digital Ampere Meter with Suitable rating CT's- 01 No (f) Digital Voltmeter (0 to 500Volts)-01 No
M/S Amar Enterprises
SEAHAWK ENTERPRISES PVT LTD
M/s NSA Engineering Corporation
VEE SONS BUILDERS PVT LTD
M/s Highway Construction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .