Supply and Installation of octagonal pole nd LED Street Light

Supply & fixing of 9 mtr GI Octagonal Pole of approved make top dia 70mm, Bottom dia 155 mm and base plate 12mm thik having 3mm thikness with Double arm bracket 1 Mtr length each on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P complete in all respect.

Supply of dubule arm designer braket 1500 mm long

Supply and laying of 16sq mm 4 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.

Supply of 2.5 Sq mm 3 core PVC insulated copper wire for making connection from pole base to fitting

Supply of HDPE 63mm flaxible PVC pipe for laying of cable

Cable laying charges including bricks and sand with labor charges

Pole wiring with fixing of MCB32 Amp.MR

Supply and fixing capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN,63 Amp. TNP-2 Nos. complete in all respect

Supply and burring of safe earthing Electrod T39 Hot Dip Galvanized lenth up to 3000mm, outer pipe 76 mm inner dia 38 mm terminal dia 12 mmouter GI pipe of 16 SWG and innter GI pipe of 12 SWG with hot Dip galvanization up to 100 micron filled with crystalline conductive mixture (CCM) HAVING ANTI CORROSIVE & conductive properly With 50 kgs. actiwated soil BFC Capable of reducing the soil resistive with good ixture retaining capcity along with 30cm squre C.I. frame

Supply and fixing of factory wired integral LED street light fitting Having dai cost aluminium body defusser with driver set suitable for 110 to 130 Watt. Confirming to IP 66 protection complete in all respect