PERIODICAL SERVICES FOR MD ACCN, REPAIR OF DAY TO DAY COMPLAINTS, CERTAIN E/M REPAIR TO ITARANA PALACE AND OTHER MISC REPAIR WORK AT ITARANA MIL STN ALWAR

Amount

M & L for brooming down old decorated surfaces of walls, plastered or unplastered including cornices, plasters etc and applying one coats of white wash complete all as specified and directed.

All as per description of serial item No. 01 here-in-above but on ceiling surfaces wash complete all as specified and directed wash complete all as specified and directed.

M & L for brooming down old decorated surfaces of walls, plastered or unplastered including cornices, plasters etc and applying one coat of oil bound distemper of approved shade/tint complete all as specified and directed.

M & L for preparation of old painted wooden surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces, complete all as specified and directed.

M & L for preparation of old painted steel surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces, complete all as specified and directed.

M & L for preparation of old treated surfaces of walls, plastered or unplastered and applying one coat of cement base paint of approved shade/tint complete all as specified and directed.

M & L for complete removal of old existing surfaces of walls, plastered or unplastered and applying two coats of cement base paint of approved shade/tint complete all as specified and directed.

M & L for writing letters or figures (Block, Roman, Itslic or Indian) n. exc 30 cm height with thick synthetic enamel paint complete all as specified and directed.

Taking down cement plaster of any description on walls, including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L rendering 15mm thick,plaster on fair faces of brick work or stone masonry or concrete surfaces in CM 1:4 including finished surfaces even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10mm thick,plaster on fair faces of brick work or stone masonry or concrete surfaces in CM 1:6 including finished surfaces fair and even complete.

M & L 5mm thick rendering in cement mortor 1:3 on concrete surfaces as in ceilings (sunshed, chajja etc) and finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M&L preparing new surfaces of walls, plastered and applying two coat of cement base paint over a coat of white wash on walls including cornices, pillasteres complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying two coats of Oil bound distemper over a coat of alkali resistant primer on walls complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling/soffits of chajjas complete all as specified and directed.

M & L for complete removing of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salt, trading oil greasy spots etc on old decorated surfaces of wall and applying two coats of oil bound distemper of approved shade/tint over a coat of primer over and inclucluding 1 mm thick Birla white wall care putty complete all as specified and directed.

Material and labour for prepration over new surface and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as er IS 15489-2004 alkarili and fungal resistance, dirt resistance exterior paint emulsion of required shade (Company Depot tinted) with silicon addtitives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10 sqm complete all as specified and directed.

Material and labour for complete removal of existing treatment and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as er IS 15489-2004 alkarili and fungal resistance, dirt resistance exterior paint emulsion of required shade (Company Depot tinted) with silicon addtitives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10 sqm Note :- Primer and emulsion to be carried out through air less spray machine (mechanial means) complete all as specified and directed.

M&L for providing and applying minimum 1mm thick wall care putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and as directed.

M&L for Rough cast plaster on exterior walls applying the under coat of cement and sand mortar 1:3 not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm) mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even .The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered complete all as specified and directed.

M&L for demolition of concrete (unrreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debris to location outside defence land complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar includin gall quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L brick work with fly ash bricks ,straight or curved on plan exc 6m mean radius, old size bricks in cement mortar 1:6 complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick built in cement mortar 1:4 complete all as specified and directed.

M & L for cement concrete type B-1 , 1:2:4 (20 mm graded aggregate) 40 mm thick in floor complete all as specified and directed.

Supply only glass dividing strips 3 mm thick and 38 mm width complete all as specified and directed.

M&L for 25 mm thick Cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as in bedding layer of floor finished the surface even and rough complete all as specified and directed.

Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colouredmatch over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No.30 above but in skirting over and including 10 mm thick plaster in cement mortar 1:4 including necessary cutting of tiles as required size complete all as specified and directed.

M&L for coloured Non skid ceramic tiles(Ist quality) 7 to 8mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors etc., laid over and including 15 mm thick screed bed of cement & sand mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Glazed ceramic coloured tiles(Ist quality) in vertical surface 450x300 x 7-8 mm thick joint free set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in Cement& Sand Mortar 1:4 complete all as specified and directed.

Hacking out old broken glass of any thickness/size & any description from wooden or steel frame fixed with clips/putty/wooden beading and S&F with 3mm thick ordinary sheet glass fixed with clips and oil putty/wooden beading completed in squares not exc 0.50 Sqm each pane complete all as specified and directed.

-do- as per item No 34 above but 3mm thick figured glass, pin head type complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed tinned tacks or GI wire stampe or nails and screws/wooden beading complete all as specified and directed.

S&F in repairs MS dropery rod 19/20 mm dia fancy type with PVC coloured sleeves fixed with suitable brackets two Nos & PVC colour bowl two Nos at end for door/window complete all as specified and directed.

S&F in repairs SS Curtain rod 19/20mm dia as including suitable fancy type brackets fixed wity rawl plug, screw etc complete all as specified and directed.

S&F in repairs 300 mm size MS, ordinary rat tail rod pattern springs including roller and roller plate complete frames with Screws/welding as required at site complete all as specified and directed.

S&F in repairs 300 mm long aluminium alloy anodised sliding door bolt with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section of cast aluminium and fixed complete all as specified and directed.

S&F in repairs Extruded aluminium alloy handle, fabricated type, anodised, 125mm size, (ISI marked) complete all as specified and directed.

S&F as in repairs 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

Supply and fixing in repairs butt hinges 100 mm long medium weight cold rolled MS fixed in repairs to wooden or pressed steel/angle iron frames by welding complete all as specified and directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed overall length 140 mm complete all as specified and directed.

Supply and fixing in repairs MS steel window stay 300 mm long for steel windows complete all as specified and directed.

Supply and fixing in repairs handles for steel windows complete all as specified and directed.

Welding in repairs not exceeding 6mm thick and not exceeding 2.5 cm in length complete all as specified and directed.

Taking down shutter of any description not exc 1 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe 15mm complete all as specified and directed.

S&F for 15mm dia steel water tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe 20mm complete all as specified and directed.

S&F for 20mm dia steel water tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 Ltrs hoisted and fixed in position with ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed of 20mm dia, minimum weight - 210 gms all as specified in SSR Part I including dismantaling existing water tanks complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 1000 Ltrs hoisted and fixed in position with ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed of 20mm dia, minimum weight - 210 gms all as specified in SSR Part I including dismantaling existing water tanks complete all as specified and directed.

S&F in repairs ball valves of 20mm dia, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed, minimum weight - 210 gms of including taking down existing ball valves any type complete all as specified and directed.

S&F (in repairs) vitreous china wash down water closet pan (Padestal pattern), white (ISI marked), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonoage pipe etc & with plastic WC seat cover (white) closed pattern with flat bottom and cover and suitable mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F (in repairs) vitreous china squatting pan 'orissa pattern' size 580 x 450 mm white with integral foot rest (ISI marked) with 'P' or 'S' trap, front or back inlet and foot rest any pattern, including connection to flushing pipe anti-syphonage pipe etc, including setting of pan & trap in lean PCC 1:5:10 complete and making good to distrubed floor with PCC or cement mortar 1:3 to match with sorroundings complete all as specified and directed.

S&F in repairs vitreous china wash basin white of size 550x400 mm with padestal stand (ISI marked) including 32 mm CP waste coupling & PVC flexible waste pipe of min 90 cm long, flat back or angle back type excluding taps, waste chain & plug but incuding cast iron brackets and cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in repairs Jet spray PVC butterfly plated for EWC with & including PVC connection 600 mm long suitable for 15 mm bore GI pipe with PTMT nut & nipple complete all as specified and directed.

S&F in repairs Jet spray chromium plated brass for EWC with & including PVC connection 600 mm long suitable for 15 mm bore GI pipe with PTMT nut & nipple complete all as specified and directed.

S&F in repairs health fusset chromium plated suitable for 15 mm bore pipe including 1 M long PVC tubes for EWC complete all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia for LLFC complete all as specified and directed. Make - Dolfine/Commander Champion.

S&F in repairs for PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repairs for PVC internal fittings (kit) complete for low level flushing cistern tank complete all as specified and directed.

S&F in repairs for towel rails of 20mm dia tubular brass chromium plated 60cm long 'D' type fixed to complete all as specified and directed.

S&F in repairs waste coupling 32mm of PTMT (half or full threaded) (minimum wt 45 gms complete all as specified and directed.

S&F in repairs plastic water closet seat cover white /coloured closed pattern with flat bottom and mild steel CP or aluminium hinging device complete all as specified and directed.

Supply and replacement in repairs of brass spindles, phases of brass of any size required 3/4/5 for bib taps, pillar cocks, stop cocks, angle valves, concealed valves complete all as specified and directed.

S&F in repairs for MS grating CP 75/100mm dia, with hole for waste pipe of approved make including fixing with CM to floor/nahani traps etc complete all as specified and directed.

S&F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered "Hot or Cold" with long screwed shanks and fly nuts, screwed for iron pipe etc complete all as specified and directed.

S&F in repairs Brass chromium plated shower rose with long arm 150mm size fixed to 15mm bore pipe complete all as specified and directed.

S&F in repairs sink with draining board made out of stainless steel 1mm thick sheet for kitchen with plug, washers, waste pipe, cast iron centilever bracket, connecting union over all minimum size 915mmx460mm with bowl size 410mmx330mm x 160mm incl 32 mm PVC flexible waste pipe complete all as specified and directed.

S&F in repairs waste coupling for sink as per sample approved complete all as specified and directed.

S&F in repairs mirror cabinet (PTMT) fixed on wall with cadmium plated brass screws complete all as specified and directed.

S&F in repairs bib taps bore of pipe in 15mm, cast copper alloy, fancy type, chromium plated, with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs for bib tap standard of PTMT any colour 15mm bore high pressure screwed for iron pipe (Min. wt 90 gms) complete all as specified and directed.

S&F in repairs 15mm bore, stop valve/angle valve, chromium plated, fancy type cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in repairs 15mm bore, two way angle valve, chromium plated, fancy type cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in reapirs, 15mm bore, stop valve external threaded, chromium plated, fancy type, with long shank, and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in repairs 20 mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & directed

S&F in repairs PVC flexable waste pipe 32/40 mm dia & approx 900 mm long with PVC waste coupling suitable for WHB, sink & urinal complete all as specified & directed.

S&F in repairs Brass CP Wall mixer for mixing hot & cold water suitable for 15mm bore dia pipe screwed down for iron pipe and fixed complete all as specified and directed.

Dismantling AC Pipe/ PVC pipes 110mm/ 75 mm dia complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls with MS clamps as per site requirement complete all as directed.

S&F PVC(SWR) Vent cowl 75mm dia complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors .

All as per item No 88 here in before but fixed to walls with clamps complete all as specified and directed.

S&F PVC (SWR) bends 75mm dia any radius complete all as specified and directed.

S&F PVC (SWR) 75mm dia Floor Trap, plain with grating including jointing with solvent cement all as directed.

Running welding in repairs not exceeding 6mm thick complete all as specified and directed.

Welding in repairs not exceeding 6mm thick and not exceeding 2.5 cm in length complete all as specified and directed.

Treatement for sunken portion is as follows :- (i) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. (ii) M&L for providing 12 mm dia holes of 40mm deep @2.00m c/c at junction of beams and columns as co-ordinal points for inserting/pouring cement slurry by pressure grouting for sunken floors of toilet , includind sealing the holes with CM 1:3, all as specified and as directed by Engineer - in - Charge. (iii) M&L for water proofing plaster for sunken portion in CM 1:3, 20 mm thick in two coats with water proofing compound at the rate of 2% by weight of cement and finishing the surface even and smooth without using extra cement. (WPC will be measured and paid seperately). (iv) M&L for applyin evenly two coats of industrial bitumen 85/25 at the rate of 1.20 Kg/Sqm in each coat over vertical surfaces and floors of sunken floors of toilet including cleaning of surfaces. (v) M&L for PCC 1:7:12 type D2 using 40 mm graded stone aggregate as in filling (sunken portion). etc. (vi) M&L for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate, mixed with WPC @ 2% by wt. of cement, as sub base, 75mm thick. (WPC will be measured and paid separately.) on top (vii) M&L for plastering in CM 1:4, 15 mm thick with water proofing compound at the rate of 2% by weight of cement and finishing the surface seven and fair.(WPC will be measured and paid seperately) Note :- Above includes (a) Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defect. (b) The sunken portion shall be tested for leakage / seepage / dampness by pounding with water for 72 hours. In case any defect is noticed the portion shall be grouted with cement slurry mixed with suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated. (c) Horizontal flat area to be measered.

Taking down carefully copper/aluminium point wiring (light, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulatos, sockets etc to be measured separately), and making good disturbed surfaces of walls, floors etc to match with existing surfaces complete all as specified and directed.

Taking down MCB with sheet metal enclosure, main switch, DB etc and making good disturbed surfaces to match with existing surfaces complete all as specified and directed.

Taking down sub main wiring of any size/capacity, Service Cable, flexible wires of any size complete all as specified and making good disturbed surfaces to match with the existing surfaces complete all as specified and directed.

M&L for One Light point controlled by one, one way switch, concealed Point wiring with two single core PVC insulate, unsheathed multistranded copper conductor cable of size 1.5 sq.mm (FRLS) drawn in and including electrical grade PVC conduit 20 mm dia concealed on wall/ceiling/floor including PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.5 sq.mm(FRLS) including MS shunk sheet metal box with modular sheet top cover of required module with frame for mounting switches, sockets etc complete all as specified. Note -(a) Quoted rates shall be deemed to include the cost of Cutting Chases in Stone/Brick wall and making good to the disturbed surfaces including plastering and painting to match with the existing colour. (b) The rates Quoted by the contractor shall be deemed to include the cost of modular cover plates of required module with frame, cost of Sheet Metal Box and no additional payment shall be made on account of the same complete all as specified and directed.

All as per ser item No 98.00 but for One ceiling/exhaust fan point controlled by one switch and regulator

All as per ser item No 98.00 but for One 3 pin switch socket outlet, 5 Amp on the same board with other switches.

All as per ser item No 98.00 but for One 3 pin 5 amps switch socket outlet point on independent board.

All as per ser item No 98.00 but for One bell/buzzer point controlled by one bell push.

All as per ser item No 98.00 but for Two way point controlled by two way switch.

All as per ser item No 98.00 but for wiring with 4 sq.mm multistranded cable and earth wire with copper conductor of size 4 sq.mm for 15 amps power points for Geyser/AC Points

All as per ser item No 98.00 but for wiring with 2.5 sq.mm multistranded cable and earth wire with copper conductor of size 2.5 sq.mm for 15 amps power point.

Supply and fixing Modular switch, one way 6 Amp, 1 module, piano type, 230/250 volts grade on top covers (catered in point wiring above).

All as per ser item No 106.00 but Modular switch, two way 6 Amp, 1 module

All as per ser item No 106.00 but Modular switch, one way 16 Amp, 1 module

All as per ser item No 106.00 but Modular bell push 6 Amp, 1 module

Supply and fix Modular socket outlet 2in1, 3pin 5A, 2 module socket out let multipurpose use, flush mounting type, 230/250 Volts grade on Top covers (catered in point wiring above).

All as per ser item No 111.00 but Modular socket outlet 2in1, 3 pin 15 Amps flush type

Supply and fix modular type ceiling rose surface bakelite two to three terminals/plate 5 amps complete all as specified and directed.

S&F Modular Type PVC AC Box with socket 3 in 1 32 Amps Capacity and complete with 01 single pole 32 Amps 240volts, MCB complete incl necessary fixing arrangement and all incoming and outgoing electric connection all as specified as directed by Engr-in-Charge.

S&F Modular Switch Socket PVC Box 8 Module Surface Type along with cover plate with frame incl necessary fixing arrangement and all incoming and outgoing electric connection all as specified as directed by Engr-in-Charge.

S&F Modular Switch Socket PVC Box 12 Module Surface Type along with cover plate with frame incl necessary fixing arrangement and all incoming and outgoing electric connection all as specified as directed by Engr-in-Charge.

S&F Modular Switch Socket PVC Box 6 Module Surface Type along with cover plate with frame incl necessary fixing arrangement and all incoming and outgoing electric connection all as specified as directed by Engr-in-Charge.

S&F Modular Switch Socket PVC Box 4 Module Surface Type along with cover plate with frame incl necessary fixing arrangement and all incoming and outgoing electric connection all as specified as directed by Engr-in-Charge.

S&F Modular Switch Socket PVC Box 3 Module Surface Type along with cover plate with frame incl necessary fixing arrangement and all incoming and outgoing electric connection all as specified as directed by Engr-in-Charge.

S&F PVC Batten Patti for Cable Trunck of sizes 150 MMX50 MM incl all necessary fixing arrangement Tees, Bends, Sockets, Flexible conduits, fixing screws etc and making good to the all disturbed electrical wiring passing through these truncks and making electric connections to the existing circuits complete all as specified as directed by Engr-in-Charge.

S&F PVC Batten Patti for Cable Trunck of sizes 100 MMX50 MM incl all necessary fixing arrangement Tees, Bends, Sockets, Flexible conduits, fixing screws etc and making good to the all disturbed electrical wiring passing through these truncks and making electric connections to the existing circuits complete all as specified as directed by Engr-in-Charge.

S&F PVC Batten Patti for Cable Trunck of sizes 50 MMX16 MM incl all necessary fixing arrangement Tees, Bends, Sockets, Flexible conduits, fixing screws etc and making good to the all disturbed electrical wiring passing through these truncks and making electric connections to the existing circuits complete all as specified as directed by Engr-in-Charge.

S&F PVC Batten Patti for Cable Trunck of sizes 25 MMX16 MM incl all necessary fixing arrangement Tees, Bends, Sockets, Flexible conduits, fixing screws etc and making good to the all disturbed electrical wiring passing through these truncks and making electric connections to the existing circuits complete all as specified as directed by Engr-in-Charge.

Supply and fix in replacement rigid non metallic PVC Conduit 20 mm dia exclusive of boxes, junction boxes, terminal but inclusive of all Tees, Bends, Elbows, reducers, bell mouth, tube ends and fixing accessories such as couplers, lock nuts, saddles pipe hooks etc complete all as specified and directed by Engr-In-Charge.

Supply and fix LED batten (1.2m) made of CRCA sheet housing with a PC glossy diffisure duly prewired connection having nominal system lumen output of 2000 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 20 watt including driver. it should have rated system life time of 40000 burning hours at L70 and should have a temperature of 6500 K CRI >80, thd <10 and PF>0.95 complete all as specified and directed make - Crompton Cat Part CIS-305-40-57-SL-DP-NWH, Philips Cat part BN308C LED20S-6500 L120 PSU WH, Havells Cat Part Stella 20 Watt Glamtube LHEWAJPGPV1D020

Supply and fix lamp holder insulated body with back plate for angle/batten fitting with LED of 09 watt complete all as specified and as directed.

Supply and Fixing 20 watt emergency LED inverter bulb B-22 CDL capacity with inbuilt powerful lithium battery backup of atleast 4 hours and having minimum two years warranty. The lighting shall have deep discharge protection, fast charging, offering cool day light for atleast four hours in off hours. Make : - Havells/Philips/Bajaj

Supply and fix Laton Gold Brass wall mounted decorative lights with Antique Brass Base plate, Brass Polished Base two Nos aesthetically designed elegant frosted glass cups in durable metallic housing inbuilt with bulb holder E27 Type (two pin or Screwed type) including insulated body with Antique Brass Base back plate for angle/batten fitting complete all as specified and as directed. Make/Model : Phillips/Janson Lights S-128-2W/Havells : Gobleto-2LS E27 GLD/Phillips Nerobless/Bajaj/Crompton

Supply and fix Laton Gold Brass wall mounted decorative lights with Antique Brass Base plate, Brass Polished Base one Nos aesthetically designed elegant frosted glass cups in durable metallic housing inbuilt with bulb holder E27 Type (two pin or Screwed type) including insulated body with Antique Brass Base back plate for angle/batten fitting complete all as specified and as directed. Make/Model : Phillips/Janson Lights JSL-5156-1W/Havells : Floretine WL1LSE27SSLHFOAJD1TZ1I060/Phillips Nerobless/Bajaj/Crompton

Supply and fix wall mounted decorative Mashal Type Lights aesthetically designed with elegant frosted glass cups in durable metallic housing inbuilt with bulb holder two pin or Screwed type including insulated body with back plate for angle/batten fitting complete all as specified and as directed. Make/Model : Phillips/Jainsons Lights MN090-1W/Havells : Floretine WL1LSE27SSLHFOAJD1TZ1I060/Phillips Nerobless/Bajaj/Crompton

Supply and fixing Ceiling/Surface mounted decorative Lights aesthetically designed with elegant frosted glass casing in durable metallic housing inbuilt with bulb holder two pin or Screwed type including LED Bulb warm white colour or LED Strib Warm white 12 Watt with inbuilt driver in insulated body with designer back plate in golden colour for angle/batten fitting complete all as specified Make/ Model : Phillips/Jainsons : LZ-320-3C

Supply and fixing for LED 9 watt Heritage Type Bollard lights for Garden height of complete fitting 1050 mm integral decorative LED Bulb E27 with Opal acrylic and IP 66 protection complete including fixing arrangement complete all as specified and as directed. Make: Bajaj Cat Part No .BGBOL 605 9W LED or equivalent in Philips/Havells/ Crompton.

Supply and fixing for recessed type LED 9 watt downlighter with Opal acrylic and IP 66 protection complete including fixing arrangement complete all as specified and as directed. Make: Bajaj Cat Part No .BGBOL 605 9W LED or equivalent in Philips/Havells/ Crompton.

S& F of decorative coloured Pole of 3 mtr length having pole material GI PU painted pipe and light material as polycarbonate acrylic of lenth as per halonix cat part no HLDC-45-75-TRI-3M with rated voltage and frequency 240v 150 hz system voltage 75 watt +- 10 % system current <0.382 mA power factor > 0.90 colour output suffron,white and green (tiranga colour with same sequence) and driver efficiency >=80 % base plate of the pole light shall be of dia 300 mm and thickness 12 mm PCB hole 260mm dia & 25 mm dia light shall be mounted on a half feet pcc plaster .properly fixed with plate and foundation bolt .Make-Halonix,Havells,Bajaj or equivalent as approved by GE

S& F of 7.5 Mtr designer pole including double arm bracket with polyster/PU Paint having pole and bracket material MS Hot dipped galvanised tubes, Aluminium embelishment, inbuilt junction box at the base of pole with provision for cable loop in and out with Single Pole MCB 16 Amps suitable for double side mounting of drop down luminiares mount with four Nos anchor bolts on foundation. base plate of the pole light shall be of square type 300x300 mm and thickness 12 mm PCB hole 210mm center to center & 25 mm dia holes Pole shall be mounted on a half feet PCC foundation properly fixed with plate and foundation bolt. Make-Halonix, Cat No.HLOP-D95-7.4M-140/89-ACE-HDG or equivalent in Havells, Bajaj.

Supply and fixing in replacement energy efficient LED Street light fitting 1 x 80 Watt, Ornamental Road Light complete with Standard LED lighting fixture with heat sink spun sheet aluminium main housing environment friendly including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to light fitting, complete fitting with all accessories and following specifications complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 5°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : <10%. (f) IP rating : IP-65. (g) CCT : Minimum 5700K (h) Polycarbonate housing white coloured (j) LED Driver of the same make as of the luminaire. (k) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (l) Surge protection minimum 2.5 kV. (m) CRI : Minimum 70 (n) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily) (o) Driver Efficiency >=85%(p) System current < 386 mA Make: Halonix Cat Part No.HLOSL-04-80-CWL-01 or equivalent in Havells, Bajaj.

Supply and fixing for LED 3 watt spike lights integral decorative LED Spike with Opal acrylic and IP 66 protection complete including fixing arrangement complete all as specified and as directed. Make: Bajaj Cat Part No .BGBOL 605 9W LED or equivalent in Philips/Havells/ Crompton.

Supply and fix in repair to 50 Watt White Colour/Warm White Colour LED flood light with pressure die- cast aluminium housing, complete with all accessories, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light with high power LEDs as light source, suitable for highlighting architectural facade lighting and general purpose lighting W Turo Floodlight luminaires with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion and IP 66 Protection fixed in existing clamp and connecting with existing cable, including nuts, bolts and washer etc complete all as specified and directed by Engr-in-Charge. Note : Rates for T&P along with suitable nos of tradesmen to fix flood lights at high mast/Bldg/other suitable location as decided by Engr-In-Charge shall be deemed to be included in the quited rates by the contractor. Make : Holonix/Philips/Havells/Crompton

Supply and fix Surface mounted COB LED fixture of 18 Watt including Track -04 Ft Length with pressure die cast aluminium housing heat sink and clear PC as a Cover in white coated powder finish with integrated electronic LED driver and prewired connection having nominal system lumen output of 2000 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 18 watt . it should have rated system life time of 40000 burning hours at L70 and should have a temperature of 6500 K CRI >80, thd <10 and PF>0.95 complete all as specified and directed . Make/Model : Crysta Deco Surf COB 18 W 6K Chrome W, Cat Part No.LHEEBGPGUE1W018 in Havells or equivalent in Philips/Crompton

Supply and fix in repair to 170 Watt LED flood light Kesariya Coloured illuminance with pressure die- cast aluminium housing, complete with all accessories, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light with high power LEDs as light source, suitable for highlighting architectural facade lighting and general purpose lighting W Turo Floodlight luminaires with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion and IP 66 Protection fixed in existing clamp and connecting with existing cable, including nuts, bolts and washer etc complete all as specified and directed by Engr-in-Charge. Note : Rates for T&P along with suitable nos of tradesmen to fix flood lights at high mast/Bldg/other suitable location as decided by Engr-In-Charge shall be deemed to be included in the quited rates by the contractor. Make: Philips/Havells/Crompton/Janson Lights

Supply and fix in repair to 170 Watt LED flood light white coloured illuminanace with pressure die- cast aluminium housing, complete with all accessories, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light with high power LEDs as light source, suitable for highlighting architectural facade lighting and general purposelighting W Turo Floodlight luminaires with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion and IP 66 Protection fixed in existing clamp and connecting with existing cable, including nuts, bolts and washer etc complete all as specified and directed by Engr-in-Charge. Note : Rates for T&P along with suitable nos of tradesmen to fix flood lights at high mast/Bldg/other suitable location as decided by Engr-In-Charge shall be deemed to be included in the quited rates by the contractor. Make: Philips/Havells/Crompton/Janson Lights

Supply and fix in repair to 170 Watt LED flood light Green Coloured Illuminance with pressure die- cast aluminium housing, complete with all accessories, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light with high power LEDs as light source, suitable for highlighting architectural facade lighting and general purposelighting W Turo Floodlight luminaires with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion and IP 66 Protection fixed in existing clamp and connecting with existing cable, including nuts, bolts and washer etc complete all as specified and directed by Engr-in-Charge. Note : Rates for T&P along with suitable nos of tradesmen to fix flood lights at high mast/Bldg/other suitable location as decided by Engr-In-Charge shall be deemed to be included in the quited rates by the contractor. Make: Philips/Havells/Crompton/Janson Lights

Supply and fix in repair to 100 Watt LED flood light Purple coloured Illuminance with pressure die- cast aluminium housing, complete with all accessories, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light with high power LEDs as light source, suitable for highlighting architectural facade lighting and general purposelighting W Turo Floodlight luminaires with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion and IP 66 Protection fixed in existing clamp and connecting with existing cable, including nuts, bolts and washer etc complete all as specified and directed by Engr-in-Charge. Note : Rates for T&P along with suitable nos of tradesmen to fix flood lights at high mast/Bldg/other suitable location as decided by Engr-In-Charge shall be deemed to be included in the quited rates by the contractor. Make: Philips/Havells/Crompton/Janson Lights

Supply and fixing for LED 3 watt ground burriel lights integral decorative LED three dots with Opal acrylic and IP 66 protection complete including fixing arrangement complete all as specified and as directed. Make: Bajaj Cat Part No .BGBOL 605 9W LED or equivalent in Philips/Havells/ Crompton.

Supply and fixing for flexible LED Strip, white/warm white illuminance Lux Level 110 Lm/Watt, Burning Hr 45000 Hrs, IP 54, 4000 K CCT, with driver complete including fixing arrangement complete all as specified and as directed.

Supply and fixing in repair LED 36 Watt ultra slim edge 2x2 feet lit panel in aluminium casing recess mounted square fixtures in white finish suitable for low ceiling height, 3 in 1 , 3K,4K,6K with & including LED prewired and connecting up dismantling of old UNSV recessed mounted light Complete all as specofoed and as directed by Engr-In-Charge

Supply & fix in repair recess type, 36 watt LED panel light Sky Type (600x600 mm) complete with fittings integrated electronic driver,energy efficient, 230 volts,co- related colour temperature (CCT) of 6500K, white coloured clouds in sky blue coloured background complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Enginee-in-Charge.

Supply & fix in repair LED post top lanterns of 40 Watt rated power and rated CCT 3000k, IP65 aesthatically designed spun Al spigot for mounting LED Driver and spun aluminium canopy which is painted white inside. Epoxy powder coated matt black finish after phosphochromate treatment, weather proof construction having robust design delivers to meet the landscaping needs , Luminaire type,Opaline diffuser suitable to be fixed over galvanised pole of diameter upto 50mm complete all as specified and directed by Engr-In-Charge

Supply and Fixing 12 watt capacity emergency LED inverter bulb B-22 with tri colour control (Cool White/Warm White/Natural White) with inbuilt powerful lithium battery backup of atleast 4 hours and having minimum two years warranty. The lighting shall have deep discharge protection, fast charging, offering cool day light for atleast four hours in off hours. Make : - Havells/Philips/Bajaj/Jhonson Lights

Supply and fixing in replacement LED Bulkhead fitting 1 x 10 Watt, complete with Standard LED lighting fixture with extruded polycarbonate housing environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to light fitting, complete fitting with all accessories and following specifications complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 5°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : <15%. (f) IP rating : IP-65. (g) CCT : Minimum 5400K (h) Polycarbonate housing white coloured (j) LED Driver of the same make as of the luminaire. (k) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (l) Surge protection minimum 2.5 kV. (m) CRI : Minimum 80 (n) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)

Supply and fixing in replacement Decorative LED light fitting for mirror adjustable type with high out put diffuser 2 feet, 10 watt 220 V AC including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-In-Charge. Make/Model : Phillips-Vega/Havells- Vanessa Glamtube

Supply and fix fresh air fan 250 mm sweep 240 vot 50 Hz plastic body complete with louvers all as specified and direted by Engr-In-Charge

Supply and fix Wall Mounted fan , copper winding motor and accessories 230V 450 mm sweep complete all as specified and directed by engineer-in-charge.

Supply and fixing heavy duty exhaust fan with copper winding motor 100 Watt Capacity, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers mounted in suitable opening arrangement with louvers shutters suitable for operation on 230 Volt Single Phase 50 Cycle per second, AC Supply and connecting up and including three core PVC Insulated PVC Sheathed copper conductor flexible cable1.0 Sqmm drawn in flexible PVC conduit and fixed by using 4 Nos 200 mm long 12 mm dia bolts nuts and washers grouted in wall in CM (1:3) complete all as specified and as directed by Engineer-in-charge.

Supply and hanging /fixing aesthetically designed BLDC chandelier ceiling fan with inbuilt elegant frosted glass cups 04 Nos LED Bulbs Chandeleir 1230-1400 mm sweep AC Supply (Input Voltage Range ; 120 to 280V), BLDC type, 5 star rated, BEE and ISI Marked super enamelled, copper winding of 'B' class insulation, single phase, minimum 35W (± 10%), Temperature rise 40 degree maximum without remote with and including capacitive regulator, 04 No blades, down rod including accessories, white colour, total harmonic less than 10%, 5 speed, hanging in position including making connection with flexible cord three core twisted copper conductor of suitable size from ceiling rose to fan including taking down old ceiling fan complete all as specified and as directed by Engineer-in-charge. Make/ Model: Usha : Fontana Maple/Polycab Superia SP02 BLDC Note :- (i) Serial Number as issued by Engr-In-Charge of celing fan and GE Office name shall also be written on fan with red colour permanent marker and fixing of regulator on switch board, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account (ii) Old ceiling fan shall be deposited in AGE E/M store yard.

S&F sheet metal enclosure incl single pole and neutal with 02 Pin and earth plug and socket complete with 01 single pole 20 Amps 240volts, MCB complete incl necessary fixing arrangement and all incoming and outgoing electric connection all as specified as directed by Engr-in-Charge.

S&F sheet metal enclosure concealed in wall incl making good of disturbed surfaces double door type suitable for fixing MCB's, SPN with 200 Amps rated bus bar, 8 Way, 230 Volts and including taking down old U/S DB ,SPN,8 way complete all as specified & directed.

S&F sheet metal enclosure concealed in wall incl making good of disturbed surfaces double door type suitable for fixing MCB's, SPN with 200 Amps rated bus bar,4 way, 240 Volts and including taking down old U/S DB ,SPN 4 way complete all as specified & directed.

S&F sheet metal enclosure in wall incl making good of disturbed surfaces single door type suitable for fixing MCB's, SPN without busbar 2 way, 230 Volts and including taking down old U/S DB ,SPN 2way complete all a specified & directed.

S&F sheet metal enclosure concealed in wall incl making good of disturbed surfaces double door type suitable for fixing MCB's, TPN 4 way, 415 Volts and including taking down old U/S DB ,TPN,4 way complete all as specified & directed.

S&F sheet metal enclosure concealed in wall incl making good of disturbed surfaces double door type suitable for fixing MCB's, TPN 8 way, 415 Volts and including taking down old U/S DB ,TPN,8 way complete all as specified & directed.

Supply and fix in repair Vertical TPN DB 4 way suitable for Double Pole outgoing MCB-40 Amp-04 Nos with incoming 100 Amps, 16 KA, MCCB 4 pole-01 Nos complete with 250 Amps rated Copper busbar flush mounting, double door, proction class IP-30, IK08 complete all as specified

Supply and fixing in repair 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 6-32 Amp poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engr-In-Charge

All as per ser item No 162 SPN 40-63 Amp

All as per ser item No 162 SPN 16-32 Amps

All as per ser item No 162 TPN 16-32 Amps

All as per ser item No 162 TPN 40-63 Amps

Disconnecting the existing Unserviceable MCCB from the cable, taking out from the panel board and supply and fix new MCCB 4Pole, 160 Amps, 36 KA breaking capacity suitable for 415 Volt, 50 Hz, 3 phase supply, fixed in existing panel and connecting with existing cable, including nuts, bolts and washer etc complete.

Disconnecting the existing Unserviceable MCCB from the cable, taking out from the panel board and supply and fix new MCCB triple pole with neutral, 63 Amps, 16 KA breaking capacity suitable for 415 Volt, 50 Hz, 3 phase supply, fixed in existing panel and connecting with existing cable, including nuts bolts and washer etc complete.

Supply and fix 2.5 Sqmm three core PVC insulated, unsheathed multistranded copper conductor cable 1100 volts grade complete all as specified and directed by Engr in Charge.

Supply and fix 1.5 Sqmm three core PVC insulated, unsheathed multistranded copper conductor cable 1100 volts grade complete all as specified and directed by Engr in Charge.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overll PVC sheathed weather proof service connections one twin core cable flat or circular of aluminium, conductors size 10 Sqmm, stranded conductors.

Material & Labour for Sub Main Wiring in repair with two run single core 4 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in PVC conduit & accessories Suitable size with and including 2.5 Sqmm copper green colour earth wire all as specified and directed by Engr-in-Charge. NOTE-two run of 4 sq.mm & One run of 2.5 sq.mm & One run of PVC conduit with accessories shall be measured as One length.

S&F sub main wiring on and including passing through PVC conduit in concealed (including cutting chasis in stone/brick wall) 1100 Volts grade with PVC flexible cable copper conductor cable fire resistant low smoke and halogen (FRLSH) unsheathed multistranded single core of size 6 sqmm and continuous earth with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm of green colour confirming to IS 694/1990 including taking down existing U/S sub main wiring. (Note: Two runs of cable with one run of earth wire and one run of PVC Coundit should measured as one length)

Supply, laying, jointing 25 Sqmm x 4.0 Coreand testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 25 sqmm 4 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified & directed. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately.

All as per ser item No 174.00 but10 Sqmm x 2.0 Core

Excavating in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation or for shafts, walls, manholes, laying of cables, pipes etc not exc 10 Sqm on plan and getting out in soft/loose soil.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil.

Removal of excavated soil/ material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified.

M/L for brick work with FLY ASH BRICKS(As Per IS-13757(1993) burnt clay fly ash building bricks), (OLD SIZE BRICKS) laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection and complete all as specified & directed.

M&L for dry sand and punning for cushioning to under ground cable complete all as specified and directed. Note :- For the purpose of payment only punned thickness shall be measured.

M/L for GI pipe ( Light grade ) for protection of LT cable fixed to walls/ poles/road crossing including clamps complete of 40 mm bore

Supply & install, testing & commissioning in repairs LT bus bar panel compartmental type,Lockable fabrication with dimension 1200(H)x 500(W)x 500(D) made by 3.15 mm thick sheet CRCA approved weather proof design framed on angle iron (40mmx40mmx6mm) double door front and rear openable both side opening shutters duly painted two coat with siemens gray color, cable entry with glands, foundation /grouting on & including PCC as per site requirement with the following :- (a) Al bus bar 300 Amp Cap- 1 Set ( Set of 4 strips) (b) MCCB 4P 415 V 250 AMPS -01 Nos (c) indicating fuse LED type R,Y,B - 3 Nos

M&L PCC (1:2:4) type B1 using 20mm graded stone aggregates as in coping of poles etc including weathering slightly roundded or chamfered angle and throating necessary form work finishing all exposed faces of concrete etc complete all as specified and directed. Note :( Volume of poles/struts embedded in concrete shall be deducted. )

M&L PCC 1:4:8 type D2 using 40mm graded aggregate as in foundation of electric poles/struts etc including necessary form work and fair finish to exposed surface without using extra cement complete all as specified and directed. Note : Volume of poles/struts embedded in concrete shall be deducted.

M & L for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) in coping for electric poles or for stay assy etc. complete all as specified and as directed by Engr-in-Charge.

M/s ASK Enterprises (BID ID -3505012)