GE (N) P/T- 29 OF 25-26 REP AND MAINT OF EXISTING UNSV INTE ELE SUPPLY REP/ REPLAC OF FIITING FIXTURES STREET/ SECURITY LIGHTS WITH LED TYPE FITTINGS MD ACCN AT CHITRAGUPTA COMPLEX PCDA TEST AUDIT ALLIED WK IN THE AREA OF AGE E/M(N)UNDER GE (N) PUNE

Amount

Material and labour for attending emergent complaints i.e no light, earth leakage, short circuit, neutral break mains/ sub mains/ internal circuits/electrical load balancing on MCB DB of existing system of main building/ block, making continious electric supply including carrying out minor repairs etc as required to make the system in order/ functional including replacing fuse wire, copper cable, copper thimbles, glands, earthing wire complete all as specified and as directed. Note :- Rate of fuse wire, copper cable, copper thimbles, glands, earthing wire are deemed to be considered in this item.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fitting fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including MCBs any type and capacity making good the disturbed surfaces to match with the existing finishes all as specified.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :-

(a) One light / fan controlled by one switch one way.

(b) One light point controlled by two 2 way switch.

(c) Socket outlet 05 Amp on same board.

(d) Socket outlet 05 Amp on independent board.

(e) One bell / buzzer point controlled by one bell push

All as per item No : 04 point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core cable for one three pin 15 Amp socket outlet point on independent board.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with GI sunken /surface boxes 1.2 mm thick, 60 mm deep with earth dolly duly as per site requirment , covered with modular white cover plate with frame suitable for modular switches, or PVC surface mounted modular box, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-

(a) One ligh/Fant point controlled by one No one way switch

(b) One three pin 5 Amps socket outlet point controlled by one No one way switch on same board

(c) One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board.

(d) One bell / buzzer point controlled by one bell push

All as per item No 6 but point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core cable for one three pin 15 Amp socket outlet point on independent board.

Taking down the existing unservicable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

M & L for for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with multistranded copper conductor of size 4.0 Sq mm nominal area and drawn through PVC non metallic rigid PVC casing caping/conduit and its accessories including one run of PVC insulated 4.0 Sq mm (nominal area) multistranded copper conductor FRLS cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed.(Note- Two runs of 4.0 Sqmm main cable, one run of 4 Sqmm earth conductor and one run of PVC conduit will be measured as one unit)

All as per item No 9 but Submain wiring with 2 runs of 6 Sqmm size main cable and one run of 6 Sqmm size earth continuity conductor.

All as per item No 9 but Submain wiring with 4 runs of 6 Sqmm size main cable and one run of 4 Sqmm size earth continuity conductor.

All as per item No 9 but Submain wiring with 4 runs of 10 Sqmm size main cable and two run of 10 Sqmm size earth continuity conductor.

Supply and replace for single core cable PVC insulated and unsheathed multistranded copper conductor of following size from point wiring/Submain wiring including removal old existing unserviceable one complete all as specified and directed.

(a) 1.5 Sq mm

(b) 2.5 Sq mm

S&F for readymade surface mounted PVC box with modular cover plate and frame all ISI marked suitable for holding modular switch socket & regulators for the following module:-

(a) 1 module

(b) 3 Module

(b) 4 Module

(c) 6 Module

(d) 8 Module

(e) 12 Module

S&F modular switch 01 way 6 Amp , 01 module ISI marked complete

S&F modular switch 02 way 6 Amp , 01 module ISI marked complete

S&F modular switch 01 way 16 Amp , 01 module ISI marked complete

M&L for Modular bell push 6 amp 230 volt 50 hz AC supply one way, complete all as specified

S&F modular socket 6 Amp , 2 module ISI marked complete

S&F modular socket 6 / 16 Amp , 02 in 01 , 02 module ISI marked complete

S&F for modular step fan regulator 120 watt 2 module suitable for 230 Volt 50 Hz supply all as specified

Supply & fix CALL Bell ISI marked complete

S&F ceiling rose surface Bakelite 3 terminals 230V 50 Hz ISI marked.

S&F for Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fitting completes all as specified.

S&F for Switch piano; flush type single pole one way, and 6 amp complete ISI mark

S&F for Switch Socket combination multipurpose having provision for 2 in 1, 3 pin 5 amp piano flush type complete all as specified

S&F for Switch Socket combination multipurpose having provision for 2 in 1, 3 pin 5/15 amp piano flush type complete all as specified

Supply only highly efficient LED retrofit Lamp 9W used as a ready replacement for existing GLS/CFL of make Philips/Havells/ Crompton all as specified and as directed.

S & F in repair for LED 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. Make- Bajaj Cat Part No BCLSB 10 NW, Halonix Cat No HLB-03-10-CW-AL or its equivallent model in JAQUAR,HALONIX, HAVELLS, PHILIPS.

S & F for for wall/ceiling mounted LED batten tube 18 watts white/ warm white light fitting, 230 volts with out put of 2000 lumens with extruded aluminium housing with decorative end caps and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 18 watts complete all as specified and as directed. Make :- JAQUAR Cat part No LGLZ01X020XN or Halonix Cat part No HLB-03-18-CW-AL ALI/ PHILIPS, Shakti Cat No SZSLAMX020

S & F in repair for wall mounted 18 watts indoor Inverter batten with opal diffuser, IP 20, with 4 hrs back up with out put of 1800 lumens , box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 18 watts complete all as specified and as directed. Make :- Halonix Cat part No. LED INVERTER BATTEN HLB-08-18-CW-INV or equivalent Philips

Supply and fix for energy saving new generation 10 watts LED bulk head fitting , 230 volts with connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor from ceiling rose to fitting complete all as specified and as directed. Make :- PHILIPS/JAQUAR Cat No.CWLL01V109XX, Halonix Cat part No. HLBH-02-10CW, 10W/Bajaj/Shakti/ havells

Supply & fix in repair decorative wall mounted energy saving 03 watt LED bedside light fitting flexible and adjustable to any direction with integeral electronic driver complete with all accessories Cat Part No 48042 of philips or, Jaquor cat Part No WBR-CHR-LBED01R003XW equivalent in Havells/Bajaj/Crompton

Supply & fix in repair energy saving 05 watt LED multicolour Spot light fitting flexible and adjustable to any direction with integeral electronic driver complete with all accessories. Make: - Havells cat no LHEVAAPBIN7K005 or jaquar/philips

S & F in replacement for Decorative wall mounted luminaire with opal glass with nickle finishing wall lamp with E27 lamp holder with and including LED bulb 10/11 watts complete all as specified and as directed. Make- Jaquar Cat part No - JNL-CHR-WLSL-55004E27 , HALONIX HLWB-05-E27 or its equivalent in Philips.

S & F in repair for recess mounted 2' x 2' luminaire to enhance the delight of occupants with comfortable experience through its classic design & glare free sift illumination square LED panel 43 watts, white/Warm White powder coated CRCA housing with full window acrylic diffuser giving a complete full glow look, operating voltage 140 volts - 270 volts, AC, 50 Hz complete all as specified and as directed. Make- JAQUAR Ultima Ultra Cat Part No LULTU1S036XC or its equivalent in Havells, Benlo/ halonix Cat No HLFPR22-07-36-CWL-R, SHakti Cat - SZRSRMX036-IC

S & F in Repair for LED down light recess mounted luminare, 1'x1'of 18/20 watts with efficiency of 100 lumens per watt, sleek design aluminium housing polycarbonate diffuser white finish operating voltage 150 V-270 V AC, 50 Hz all as per Make- Halonix Cat No HLFPR11-02-18-CW, jaquar nero plus LNRP01R012XN or Havells, Phillips , Benlo Shakt Cat SZRDSMX018 complete all as directed by Engineer- in-charge

S & F in Repair for LED down light recess mounted luminare, Square type 15 watts with efficiency of 100 lumens per watt, sleek design aluminium housing polycarbonate diffuser white finish operating voltage 150 V-270 V AC, 50 Hz all as per Make- Halonix Cat No HLFPR11-02-18-CW, Philips Cat Part No DN172B LED9S-6500 PSU, jaquar nero plus LNRP01R012XN, Shakt Cat SZRDSMX015 or Havells complete all as directed by Engineer- in-charge

S & F in Repair for LED downlight recess mounted luminare round type 12 watts with inbult driver and polycarbonate opal diffuser white finish operating voltage 230V AC, 50 Hz including taking down old unserviceable fitting complete all as directed Make :- Halonix Cat HLDLR-R06-12CW, Shakti Cat SZRDRMX012 Jaquar, philips/ Benlo/ Havells in equivalent

S & F in repair LED post top lantern fitting New generation, energy saving, environmental friendly, long life aesthetically designed Die cast aluminium housing of capacity 45 Watt, with high power LED as light source complete with all accessories fixed on GI pipe 40mm dia complete all as specified and directed. Make : Bajaj Cat part No BGCTN 40W LED WW, Benlo/Halonix Cat No HLPT-S04-45-CW or Shakti Cat No SZPGPMX040

M & L for PCC (1:3:6) type C1(using 20 mm graded stone aggregate ) as in foundation of poles and similar works, filling mass concrete complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying cables etc and getting out in soft / loose soil complete all as specified and as directed by the Engineer - in - Charge.

Supply and laying galvanised steel tubing, light grade, IS-1239 marked with all fittings (ISI marked) and laid in trenches / under roads / in drains / fixed to poles/wallswith required size flat iron clamp bolts, nuts and washers, pipes of the 100 mm bore sizes :-

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by the Engineer - in - Charge.

Removing excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

Material and laying 50mm outer dia, double walled corrugated (DWC) HDPE duct pipe conforming to IS- 14930 Pt-II with antirodent and non flame propogating properties of approved colour complete with fittings for cable protection complete all as specified and as directed.

Supply, lay, joint, test and commissioning of LT under ground cable 1100 volt grade , XLPE insulated and PVC sheathed heavy duty armoured with aluminium conductor , IS 7098-I Marked, Laid in trenches/ducts/fixed on poles/walls/laid under roads/paths/drains/culverts or encased in GI pipe including cable glands, lugs jointing material etc complete including taking out old UNSV cable all as specified and directed. cable of the following size.

(a) 6 Sq mm 2 Core

(b) 10 Sq mm 4 Core

(c) 16 Sq mm 4 Core

(d) 25 Sq mm 4 Core

Laying only LT underground cable of any description and size (serviceable cable obtained from taking down here-in-before), laid in trenches/ surface of wall/ in GI pipe along with pole for connection to overhead lines including brass cable glands MS flat iron clamps, etc. and testing complete all as specified and as directed. (Note : (i) Earth works,HDPE duct pipe, GI protection pipe will be measured and paid separately under relevant items. (ii) Cost of shifting of cables at work sites as ordered is deemed to be included in the quoted unit rate.)

S/F in replacement LED street light fitting 60 Watt 230V energy efficient & environment friendly type. The fitting should have powder coated, pressure die cast Aluminium housing and heat resistant toughened glass with frame having better optics for uniform distribution complete all as per Make JAQUAR LSRTO1S060XC or Bajaj ENXT P 72L WH CR PC SD / HAVELLS ENDURAOMNIPLUSSL60WLED757SASYTOPC Halonix Cat : HLSLD-01-60-CWL-R or equivalent in Benlo, Shkati

All as per item No 49 but security light fitting of capacity 25 watt of Make: JAQUAR Cat No LSRTO1S025XC or Bajaj ENXT P 30L WH CR PC SD / HAVELLS ENDURASUNDOWNSL25WLED765PASYBOPC/HD Halonix Cat : HLSLD-01-25-CWL-R or equivalent in Benlo, Shkati

All as per item No 49 but security light fitting of capacity 45 watt with lumens out put not less than 4500 lumens of Make JAQUAR LSRTO1S060XC or Bajaj ENXT P 54L WH PO PC SD / HAVELLS ENDURASUNDOWNSL45WLED765PASYBOPC Halonix Cat : HLSLD-01-45 -CWL-R or equivalent in Benlo, Shkati

All as per item No 49 but security light fitting of capacity 90 watt with lumens out put not less than 9000 lumens of Make: Bajaj Cat No.Cat No. BRTFG 90 W LED I, or its equvalent inMake JAQUAR LSRTO1S060XC or Bajaj ENXT P 72L WH CR PC SD / HAVELLS ENDURAOMNIPLUSSL60WLED757SASYTOPC or equivalent in Benlo, Shkati Halonix Cat : HLSLD-06-90 -CWL-R

M & L in repair for wall/Pole mounted GI bracket, 40mm dia medium grade 1.5metres length of suitable shape with all clamps, nuts, bolts GI Bracket as per sample suitable for security light all as specified and directed.

Supply and fix in repair for Junction box IP 66 ready made type box size 130x130x 77 mm wheather proof for out door installation with knockouts for cable entry with necessary connections and fixed the box on poles by means of mild steel flat iron with suitable size of nut, bolts and washers complete all as specified and as directed by Engineer-in-Charge. Make: Hensel KF 0606B or Equivalant in Sintex)

Supply and fix in replacement for energy saving long life presure die cast housing and heat sink in aluminium extrusion IP 66 flood light fitting luminaire with secondary optics, high power LEDs as light source and electronic driver of capacity 200 watts with pre wired suitable for sports lights and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make: Bajaj / Philips/Havells/Jaquar/ Halonix Cat No HLFLD-ML-27-200-CW-R01

Supply and fix in replacement for energy saving long life presure die cast housing and heat sink in aluminium extrusion IP 66 flood light fitting luminaire with secondary optics, high power LEDs as light source and electronic driver of capacity 150 watts with pre wired suitable for sports lights and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make: Bajaj / Philips/Havells/Jaquar Halonix Cat No HLFLD-ML-27-150-CW-R01

Supply and fix in replacement for energy saving long life presure die cast housing and heat sink in aluminium extrusion IP 66 flood light fitting luminaire with secondary optics, high power LEDs as light source and electronic driver of capacity 100 watts with pre wired suitable for sports lights and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make: Bajaj / Philips/Havells/Benlo/Jaquar HLFLD-ML-27-100-CW-R01

S & F in repair decorative LED bollard with aluminum die casting, with adequate size elecrical connections complete all as specified and as directed. Make: Jaquar Monaco Cat part No 340.44.NGG , Halonix Cat No HLOB-02-10- or equivalent in Bajaj, Shakti / Benlo

S&F in repair for fixing neon LED Rope light to be fixed with binding wire at equal distance on pole/ Building And should be shockproof, Waterproof suitable for Outdoor purpose, Flexible Strip with and including suitable Adapter for Decoration purpose. Make Havells/Phillips/Jaquar

Supply and fix in replacement for driver suitable for LED garden light bollard Fitting of compatible capacity 10 watts. Make:- Phillips, Havells, Jaquar, Crompton, Bajaj,wipro.

S & F MCCB 4P 415 volts 25 KA suitable for fixing on DB of capacity 100 Amps with extended terminals complete all as specified. Make -Schneider/Legrand/L&T/ABB.

S&F in repair for MCCB DB VTPN 4 way double door sheet metal enclosure for 100 Amps 4 pole MCCB (ICS = ICU= 100%) Incomer comprising OEM/manufacturer specified bus bar, 415 Volts, 50 Hz , 160 Amps bus bar and neutral link complete including inserting in wall all as specified. MAKE:- Havells Cat No DHDLVDRWGOF004, LEGRAND/SCHNEIDER/ L&T

S&F in repair for MCB DB TPN 4 way double door sheet metal enclosure for 63 Amps MCB TPN incomer comprising of OEM/manufacturer specified bus bar, 415 Volts, 50 Hz bus bar and neutral link complete including inserting in wall all as specified. MAKE:- Havells Cat No DHDNTHCDRW04 LEGRAND/L&T/SCHNEIDER/C&S

S & F for MCB triple pole and neutral 415 Volts, 63 Amps, 10 KA. Make -Schneider/Legrand/L&T/ABB/ Havells

S&F in repair for MCB DB SPN 04 way double door sheet metal enclosure with OEM specified common bus bar and neutral link compete including inserting in wall all as specified. MAKE:- LEGRAND/SCHNEIDER/L&T/ Havells

S&F in repair for MCB DB SPN 08 way double door sheet metal enclosure with OEM specified common bus bar and neutral link compete including inserting in wall all as specified. MAKE:- LEGRAND/SCHNEIDER/L&T/ Havells

S&F in repair for MCB DB SPN 12 way double door sheet metal enclosure with OEM specified common bus bar and neutral link compete including inserting in wall all as specified. MAKE:- LEGRAND/SCHNEIDER/L&T/ Havells

S & F for 'C' curve MCB single pole & neutral 240Volts 32/40 Amps. Make -Schneider/Legrand/L&T/ABB/ Havells

S&F 'C' curve MCB SP 240 volt 6 to 30 Amp Make -Schneider/Legrand/L&T/ABB.

Supply and fix in replacement MCB Protected SRCD box 4 module 25 Amps with surface mounted PVC enclosure SRCD(socket residual current device) single pole with a three pin socket & top complete with 25 Amps MCB single pole. Make: Havells Cat part No DHDTCSN0251020 OR Equivalent L&T/Legrand

S & F for casing and capping size 20 mm for existing wires including removal of old unserviceable one complete all as specified and as directed

S & F in repair for for plastic body exhaust fan, AC single phase, 240 V of 200 mm sweep with louvers including necessary connection and replacement of flexible copper cable from ceiling rose complete all as specified and as directed ( Make :- Cat Part No -698501 Ivory new of Indo Asian or Bajaj Maxima DX/ Usha Striker / Crispair)

Supply and fix in repair for plastic body exhaust fan, AC single phase, 240 volts of size 250 mm sweep with louvers all as per Cat No. Maxma DX 10" of Make Bajaj or equivalent of Automberg/ Havells/Usha with necessary connection and replacement of flexible copper cable from ceiling rose complete all as specified and as directed.

Supply and fix in repair for plastic body exhaust fan, AC single phase, 240 volts of size 150 mm sweep with louvers all as per Cat No. Maxma DX 10" of Make Bajaj or equivalent of Automberg/ Havells/Usha with necessary connection and replacement of flexible copper cable from ceiling rose complete all as specified and as directed.

Supply and fix in repair for metal body exhaust fan, AC single phase, 240 volts of size 225 mm sweep of Make Bajaj Bahar or equivalent of Havells/Usha with necessary connection and replacement of flexible copper cable from ceiling rose complete all as specified and as directed.

Supply and fix in repair for wall mounted fan of size 400 mm sweep BEE. ISI marked and connecting up including complete all as including removal of old unsv fan complete all as specified and directed. Note : a) Quoted Rate is deemed to inclusive of Stickering/Marking/writing of MES numbers in bottom of ceiling Fan as directed by Engr-in-Charge. Make:- Bajaj MIDEA BW 2200, USHA , Havells V3.

Supply and fix in repair for Ceiling Fan of sweep size 1200 mm BEE. Five star rated with brushless direct current motor (BLDC) →, ISI marked and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed. Make:- Bajaj , USHA , Havells, Orient

Supply & fix in repair storage type vertical Geyser, single phase , 230 volts , capacity 25 ltr (with Digital display and Feroglass technology) including PVC connection for hot & cold water complete fixed on wall with the help of T head bolt 10 mm dia 100 mm long grouting on wall all as directed by Engr - in - Charge . Make : Havells Monza Digi 25L ivory- Brown OR Racold Andris UNO, Jaquar

Taking down & Refixing GI/Aluminium earth conductor strips from existing roof / down/ earth continuity conductor/ static discharge strips of any type and any description/ size from stone wall/ manglore tiled roof/floor and refixing the same with post insulator epoxy LV type at maximum 0.8 M span including brass nut , bolts, washers etc. and making good to the disturbed surfaces to match the existing complete all as specified and directed at site. Note : - Rates of epoxy Insulators shall be deemed to be included in rate quoted above.

Attending the complaints of non functional ceilling/exhaust fan of any sweep and testing and repairing the ceilling/exhaust fan by replacing of fan condencer, fan regulator and connection wire etc. and making fan serviceable including checking the strengh of Clamp, down rod and provision of check nuts and split pin all as directed. (Note :- Item such as fan condenser, fan regulator, 1.5 sqmm, 3 core copper flexible cable shall be measured and paid seperataly as 'Supply Only'.)

Taking down ceiling fan of any size/ sweep for repair or taken to work - shop for rewinding and refixing the fan after rewinding, cleaning dust, oiling, greasing, servicing, etc as per existing & connecting flexible 3 core cable from ceiling rose to connector of fan, complete all as specified and directed by Engineer-in-charge (Note- Ball bearing, gun metal bush, rubber reel with clamp, nut-bolts, blade assy, outer body, canopy, rotor, stator etc shall be measured and paid separetaly as 'Supply Only' and rewinding item paid seperately under relevant item)

Material and labour for rewinding of ceiling fan of any size with supper enameled copper wire of existing gauge including varnishing and drying complete reassembling and testing of size 1200 mm sweep complete all as specified and as directed.

Supply only fan condencer, 2.5 Mfd, 240 volts for ceiling/Exhaust fan including PVC clamp.

Supply only bearing No 6201/6202/6203 suitable for ceiling fans complete all as spcified and directed by Engineer-in-charge

Supply and fix in replacement for ceiling fan down rods of 15mm bore GI pipe medium grade of any length including welding and fixing with clamps and nut bolts etc at any height complete all as specified and as directed.

Supply only Motor assembly complete with Armature (Rotor) unit and Field winding (Stator) unit with shaft heavy duty suitable for 450mm sweep Wall fan metal body of make suitable to existing as per sample complete all as specified and as directed.

Material and labour for rewinding of Wall fan of size 450 mm Sweep with supper enameled copper wire of existing gauge including varnishing and drying complete reassembling and testing complete all as specified and as directed.

Supply & fix in repair Heating element long length suitable for existing cylindrical type geysers all as per sample including rubber washers (ISI marked) of any type suitablt to existing geuser of capacity 1500 watts complete all as directed .

Supply & fix in repair Thermostat ISI marked analog type & adjustable type suitable for the Geysers 25 ltrs/ 50 ltrs capacity, 20 Amps, 240 Volts AC, 210mm/300mm long or nearest size as per sample.

Supply & fix in repair stainless steel flexible connections pipe with brass hexagonal adapters both side. Suitable for 15mm dia pipe 60cm long for HOT & Cold water as per requirement.

Supply & fix in repair for 10Sq mm, 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC sheathed in service connections one twin core cable flat or circular

M& L in repair for Plastic trunk ISI marked of size 150x50 mm with flexible cover of 130 mm width, internal angles (adj from 80 degree), external angles (adj from 60 degree), joints for 130 mm width cover, base joint and end cap complete including all fixing arrangement all as specified and as directed by Engr-In-Charge.

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

Suchit constructions (BID ID -3395180)

MAHALAXMI ENTERPRISES (BID ID -3403571)

K.K.Enterprises (BID ID -3395768)

Sanjivani Electricals (BID ID -3404076)