Salvaging of old belt drive head and structure and installation of new dual drive head with new structure and belting at 6 no. first belt in Khottadih Colliery.

Amount

Salvaging of old drive head and structure and installation of new dual drive head with new structure and belting at 6 no. first belt in Khottadih Colliery. (Inclusive of EPF/CMPF)

Complete Installation after Transportation & with Necessary Fabrication of 190 mtrs 1000 mm width, 110Kw Belt Conveyor for B20 panel of CM panel which includes 1) Transportation, Carrying from Surface & Fitting of Discharge Head (800 X1400 mm) with Deck Plate, Chute, scrapper and 08 nos of Girders (125 X 250 mm) - 3.0 MT 2) Transportation, Carrying from Surface & Fitting of Drive head with Gear Box & Motor – 7.5 MT 3) Transportation, Carrying from Surface & Fitting 1 nos. of load table for Tail End& decking plate – 1 MT. 4) Transportation & Fitting including grouting of Tail end Assembly with V-Scraper & Decking fabrication & Fitting - 1 MT 5) Transportation, Carrying from Surface & Fitting Loop take up assembly with Winch. & Bend Pulley frame - 3.0 MT, 6) Fitting Complete 490 mtr Structure with Top & Bottom Rollers after transported from surface to work site laying ,and, fitting @ -110Kg-per-mtr, - 53.9 MT

Fabrication of One no of hopper 04 mtrs long which including labour cost, oxygen, DA and welding

Fabrication of one no. of heavy duty tail-end assembly which including labour cost, oxygen, DA and welding

1000 mm PVC Belting transportation from surface, laying, jointing tensioning trail run etc.

1)Holding down bolts of Drive Hd & Stucture , and Tail End. – 40 Nos

Transportation of ACB, starter & PVC cable, Pull Cord, Signaling System etc surface to site.

Fencing of Drive Head, Loop Take Up and Tail End

Hanging by vartical support 30 mtr. length conveyor structure providing M.S. channel

Consumable Nut & Bolt 5/8 “X 2“ -490 Kg, Plain washer- 30 Kg,

Dismantling and carrying with transportation of discharge head (800 X 1400mm) with deck plate, chute, scrapper and 08 nos. of girder (100 X 200mm) from 6no 1st Belt in R-IV seam to surface site

Dismantling and carrying with transportation of discharge drive unit (Drive, Gearbox, motor) including base frame from 6no 1st Belt in R-IV seam to surface

Dismantling and carrying with transportation of 01 no. to load table (hopper) and tail end set with decking plate from )6no 1st Belt in R-IV seam to surface

Dismantling and carrying with transportation of loop take up with winch & bend pulley frame from 6no 1st Belt in R-IV seam to surface

Dismantling and carrying with transportation of 490 mtrs conveyor structure with top & bottom roller from 6no 1st Belt in R-IV seam to surface

Dismantling and carrying with transportation of 1000 mm wide 980 mtr PVC belting from 6no 1st Belt in R-V seam to surface

Dismentling of one tail-end assy. from 6no 1st Belt in R-IV seam & carrying to surface

Cleaning of coal for Discharge, Drive, Hopper & Tail end set from 6no 1st Belt

Total impact of GST for the purpose of CTC

NANDI ENTERPRISE (BID ID -1101275)

BABLU SINHA (BID ID -1101277)