Provision of certain special repairs, revenue works and minor works in North, South, east and West camp of MFFR under GE (N) Bikaner.

Amount

Taking down cement plaster on brick walls etc including raking out joints, hacking for key, scrubbing down with water etc.

Demolition of brick or stone masonary including all necessary arches, pillars, quions etc built in cement mortar.

M&L for brick work with Fly Ash bricks ,old sized bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6

M&L for rendering 15mm thick in CM 1:6 on other than fair face of brick or concrete surfaces finished even and smooth without using extra cement.

M&L for rendering 15mm thick in CM 1:4 finished even and smooth without using extra cement

M&L Mild Steel Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

M&L MS plates/flates angle ,wind tie nut and bolts etc as in cleat gusset incl drilling welding etc

Dismantling Steel corrugated or plain sheets in roof coverings including ridges any gauge or thickness complete.

Dismantling of structural steel work (framed truss) n exc 10 m span complete.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) n exc 1.5 sqm all as specified.

M&L pre-painted galvatume aluminium zinc coating Gi based corrugated steel sheet 0.5mm thik of an colour having tensile strenght of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified

M&L Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mps as in roof covering/cladding to wall fixed with self tapping screws as specified.

M&L Preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over a coat of primer as per manufacturer's instructions complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint white or tinted over a coat of primer as per manufacturer's instructions complete all as specified..

M&L Preparation of old plastered or unplastered surface of wall and applying two coats of distemper oil emulsion, white or tinted over a coat of primer as per manufacturer's instructionscomplete all as specified and as directed by Engineer-in-Charge.

M&L Preparation of old plastered or unplasterd surface of walls and applying two coat of cement base paint (Ist quality) in plain pattern on walls over a coat of primer as per manufacturer's instructions complete all as specified.

M&L Preparing old painted surfaces of steel or steel based materials over 10 cm width or girth of any description & applying one thick coat of synthetic enamel paint complete all as specified.

M&L mild steel work in Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains;hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in bed blocks of hold fasts ,copings,plinth course(DPC) , bed plates, (blocks cills) steps and other bands parapet etc complete all as specified.

M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in filling in pressed steel frames complete all as specified and as directed by Engineer-in-Charge

S&F 30mm thick Flush shutters, solid core construction,with block board core or plywood face panels, commercial type on both side.

S&F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed by Engineer-in-Charge.

S&F 100mm long butt hinges medium weight cold rolled mild steel and fixed.

S&F MS bow handle oval type handles 150mm size.

S&F 150mm long MS tower bolts

MS sliding door bolts 250mm size, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum 6 bolts and nuts four on bolt plate and two on staple plate and fixed.

M&L for preparation of new wooden surfaces and applying two coats of synthetical enamel paint over a coat of pink primer.

M&L 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 sqm each pane.

Hacking out old broken glass (any thickness, size, quality or description) from from old wooden or metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads etc including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete.

S&F Anodized aluminium snap grid frame work of size 605 x 605 mm for false ceiling including necessary notching. The snap grid shall consist of nodized aluminium main & cross tee of size 35 x 25 x 1.4 mm weighing 0.24 Kg/RM and 25 x 25 x 1.40 mm weighing 0.191 Kg/RM respectively. The main and cross tee shall be jointed at junction crossing with anodized aluminium angle bracket of size 15mm x 15mm x 1.5 mm weighing 0.12 Kg/RM fixed with suitable MS bolts, nuts and washer. The snap grid (main/cross tee section) shall be supported at ends all along the wall with anodized aluminium angle of size 35 x 25 x 1.6 mm weighing 0.36 Kg/RM fixed to wall with suitable arrangement and providing 12 mm thick minral fibre boards in grid fixed as false ceiling grid made of aluminium as per specification all as specified and directed by Engineer-in-Charge.

M&L preparation of new steel surfaces and applying two coats of synthetical enamel paint over a coat of red oxide zinc chrome primer.

Taking down or up, 15 mm bore galvanised steel tubing and connections including cleaning for refixing or removal complete all as specified and directed by Engineer -in-charge.

Taking down or up, 20 mm bore galvanised steel tubing and connections including cleaning for refixing or removal complete all as specified and directed by Engineer -in-charge.

Taking down or up, 25 mm bore galvanised steel tubing and connections including cleaning for refixing or removal complete all as specified and directed by Engineer -in-charge.

S&F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15mm complete all as specified and directed by Engineer-in-charge.

S&F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20mm complete all as specified.

S&F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 25mm complete all as specified.

S&F Angle valves, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down high pressure, screwed both ends for 15 mm bore dia iron pipe or for union, ISI marked, supplied and fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

M&L Vitreous china wash basin, white, flat back, size 550 x 400mm, including brackets and cutting for and pinning in ends of brackets, fixed in repairs including 32mm bore brass chromium plated waste fitting and 32mm bore PVC waste pipe of sufficient length complete.

Supply & Fixing vitreous china wash down water closet (squatt pan ) white orissa pattern size 580X440mm with integral foot rest (excluding flushing cistern and flush pipe) fixed in repairs .

S&F Waste pipe 32mm for WHB & urinals with coupling fixed in repairs.

S&F in repairs pillar taps cast copper alloy with capstan head, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S&F bib taps cast copper alloy chromium plated fancy type 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F Stop valve cast copper alloy with crutch or butter fly handle screwed both ends & screwed for iron pipe of 15mm fancy type chromium plated concealed type fixed in repair

Dimantling water tanks capacity exc 500 & n.exc.1000ltrs.

S & F Rotational moulded polyethylene water storage tanks of capacity 1000 litres, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and as directed by Engineer-in-Charge. (Notes : (i) The water storage tanks shall be 3 layers, HDPE tanks moulded to seem-less perfection of rotational moulding process. The tanks shall be manufactured only from FDA approved special grade of polyethylene and shall be certified fit for potable water. (ii) The tanks shall be white coloured with three layered wall and shall be ISI marked. Also refer paras 18.60 and 18.60 A of MES Schedule Part-I. (iii) Payment for inlet, outlet and over flow pipes and ball valve shall be made separately. However cost of providing necessary GI fittings such as nipples with check nuts for inlet and outlet pipes, GI plug with check nut for over flow pipe and 30 cm long wash out pipe, GI 20mm nominal bore, medium grade and check nut for wash out pipes of size as per actual requirements and as directed by the Engineer-in-Charge shall be deemed to be included in the unit rate of this item.(iv) HDPE storage tanks shall be procured from the manufacturers as per Appendix “D”.)

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc in any position all as directed by Engineer-in charge.

S&F Ball valve high pressure of PTMT with epoxy coated almn rod and high density plastic ball screwed for iron pipe and fixed fixed in repair.of 20mm Make : Prayag or equivalent.

Supply and fixing PVC valve less, symphonic action type, flushing cistern, low level white with inlet, ball valve, float and handle including brackets 10litres complete

M&L for coloured non skid ceramic tiles 300 x 300 x 7mm thick in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in CM 1:6

M and L for coloured Glazed ceramic tiles 300X200mmX7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the floor as on vertical surfaces laid over 10mm thick cement screed in 1:4.

Cutting chases,pinning in making good to facing where requried and pointing in cement mortar 1:3 to ends or edge of landings,steps,cills,sunshade,shelves, lintel etc. tubes or concealed conduit etc. and making good, cutting not exc 10 cm girth

S&F Stop valve cast copper alloy with crutch or butter fly handle screwed both ends & screwed for iron pipe of 20mm dia fixed in repair.

S& F PVC floor trap 75mm incl.CP grating .

S& F PVC(SWR)single socketed in any length with rubber ring joint fixed with wall of 110mm as in soil waste pipe

S& F PVC SWR branch piece single equal or unequal 110mm

M&L 50 mm thick PCC Type B-1 1:3:6 using 40mm graded stone Agg. As in Pcc for plinth Protection

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified and approved.

S&F factory made solid panel PVC door shutter with MS square tube 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC sheet stirip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top,lock and bottom rail on either side & as gap insert for top rail & bottom rail .panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement S&F in the frame at site as per specification.

S&F Butt hinges extruded alumonium alloy with galvanised mild steel hinges pin anodisedand fixed ,type B-21 of 100mm.

S&F Aluminium anodised barrel tower bolt of extruded section of 150mm

S&F Aluminium handles cast type anodised of 150mm

S&F 110mm PVC sanitary connection -for WC connector

S&F PVC connection 15mm size with PTMT nuts of length 450mm.

S&F overhead shower with arm 225 mm with flange of cast copper alloy chromium plated fixed and repair

S&F Towel rail 600mm long of cast copper alloy, chromium plated, fixed in repair complete all as specified and directed by Engineer-in-charge.

Cutting opening through brick walls for door , window and other opening or enlarging existing opening,converting window into door opening etc. cutting out deffective brick work for under pinning including providing fixing and removing shoring cleaned and stacking bricks removing surplus servicable brick,hard core etc

M&L Granite 19 mm thick of any type work table rubbed and polised in steps,jambs,pillars,window cill, cooking plateforms and like in cement mortar 1:4 including pointing cement mortar 1:2 using marble dust with admixure of pigments to match with shade of granite

S&F in repair viterous china urinal Half stall type white, with grating and union of discharge pipi including connection to flush pipe and out going pipe, fixed complete all as specified.

Demolition of cement concrete in ground floors and paving n exc 15cm thickness (below or above ground level).

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings including ridges complete.

Dismantling timber in fillets, rails, posts, rafters, purlins, etc under 40 Sqcm in section, in unframed work in any position complete.

Tacking down old rusted and damaged steel window/vent incl. guard bar and grill where exist of size not excl 1.5 sqm each and all as specified

Taking down chowkats or frames with shutter (without taking off shutters from the frame)exc 1.5 sqm but n exc 4 sqm all as specified.

Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed by Engineer-in-Charge.

M&L Glazed and skelton shutters,(35mm)open rebated and prepaired to recive glass,gauze etc.(without sash bars) edge or framing plain, chamferd or rounded fitted with cut and mitreds beads for securing glass.

M & L for Galvanised wire cloth 0.56mm nominal dia of wire and avg.width of aperture 1.18mm fixed with tinned tacks or galvanised wire staples.

S&F Steel window with side hung shutter incl.box type hinges with steel handle of MS flat 25x5mm and 2nos tower bolt of 100mm long fixed to shutter comp. With glazing bar dovtailed or welded including one shop coat of primer.

S&F Steel window with side hung shutter incl.box type hinges with steel handle of MS flat 25x5mm and 2nos tower bolt of 100mm long fixed to shutter comp. Without glazing bar dovtailed or welded including one shop coat of primer.

S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165.

Dismantling of Stone flooring of any thickness in floors laid in cement mortar etc

M&L 20 mm thick machine cut kota stone slab in flooring with 100mm wide white marble stripps etc., laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing and also including rounding off outer exposed edges and also including laying over and including 15mm thick backing coat in cement and sand mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

M&L 15 mm thick machine cut kota stone slab on vertical surfaces as in skirting/riser of steps etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, over and also making edges rounded or bull nosed, over and including and including 10 mm thick rendering in cement and sand mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

Dismantling Steel corrugated or plain sheets in roof coverings including ridges any gauge or thickness complete.

Dismantling of structural steel work (framed truss) n exc 10 m span complete.

Excavation over area n exc. 1.5 m deep and getting out in soft soil

Excavation in trenches, not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes or for laying pipe lines, cables etc not exceeding 10 Sqm area on plan and not exceeding 1.5 meter in depth and getting out in soft/loose soil complete all as specified .

M & L for PCC (1:4:8) type D-2 using40mm graded stone aggregate in foundation/filling and mass concrete complete all as specified

M&L for hard core of broken stone boulders of gauge nexc 63mm deposited spread and leveled in layers not exe 15cm thick watered and rammed to a true surface complete all as specified.

M&L brick work for sub class ‘B’ bricks (old size) straight or curved on plan exceeding 6 meter mean radius built in CM 1:4 complete all as specified

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified.

M& L for 75 mm thick PCC flooring 1:4:8 Type D-2 (using 40mm graded crushed stone aggregate ) as in / subbase of floor finishes complete all specified.

M& L for 50 mm thick PCC flooring 1:2:4 Type B-1 (using 20mm graded crushed stone aggregate ) as in top flooring concrete surface finished even & smooth without using extra cement complete all as specified.

Returning, filling in, including spreading,levelling, watering and well ramming in layer not exe 25 cm complete all as specified

Removing excavated materials(soils) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point and depositing where directed complete all as specified

M&L 15mm thick screed bed or bedding layer for fixing of floor tiles finishes in CM 1:6 complete all as specified.

M&L for 10mm thick rendering f in cement mortar 1:4 as on dados skirting and vertical surface complete all as specified.

Supply and fixing stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed to pipe of 25mm bore all as specified.

Cutting to existing steel tubing GI pipe 25mm bore for alterations or additions (Each cut measured) Screwing existing steel tubing complete all as specified.

Excavation over area exc. 1.5 m but n exc 3 m deep and getting out in soft soil comp.all as specified.

Jodhpur stone of roof slab self faced 1.5cm to 10 cm thick 25 to 35 cm wide hoisted and set jointed and grouted in cement and sand mortar 1:6 comp.all as specified.

M&L PCC 1:2:4 type B-1 using 20mm graded stone agg. ,50mm thick as in floors over stone patti roof slab finished the surface even and fair comp.all as specified.

M& Lbrick work with Sub class -B bricks in one brick thick honey comb walling for soak well wall in CM 1:4

M&L PVC(SWR)single socketed in any length with rubber ring joint fixed with PCC floor of 110mm as in vent pipe

M&L PVC (SWR) 110mm dia Vent Cowl

Surface dressing not exc 15 cm deep in soft/loose soil.

M&L for brick work with Fly Ash bricks, old sized bricks straight or curved on plan to any radius in half brick thick built in CM 1:6

Earth filling under floors , Spreading, levelling in layers n exc 25cm thick including well ramming and watering as required.

Providing 40mm thick damp proofing course 1:2:4 type B-0 including necessary form work including WPC.

M&L Mild steel bars TMT 10 mm dia and over cut to length bent to shape required incl. cranking bending spirally for hoop for columns ,hooking ends and binding with and including mild steel wire not less than 0.9mm dia deformed or twisted bars.

M&L Mild steel bars TMT 8 mm dia cut to length bent to shape required incl. cranking bending spirally for hoop for columns ,hooking ends and binding with and including mild steel wire not less than 0.9mm dia deformed or twisted bars.

M&L Form work to soffits of suspended slab such as roof slab not exc 200mm thick to rough finished surface of concrete

M&L Form work to edges of conc. Flat floor and roofs n.exc 20cm wide to rough finished surface of concrete .

M&L Reinforcement cement concrete design mix M-25 in slab supported on wails beams and columns in floor roof landing and the like .

Lime concrete terracing as specified on roof

M&L for 10 mm thick Rendering in cement mortar 1: 4 on concrete surfaces, finished Fair & even including mixing water proofing compound as per manufacturer's instns( WPC to be measured separately as supply only)

M&L for polythene film black 150micron thickness.

Supply only water proofing compound, ISI marked, complete all as specified and as directed by Engineer-in-Charge.

Applying evenly a tack coat of industrial bitumen 85/25 ,1.2kg/sqm incl cleaning surface.

40 mm thick Brick tiles bedded in 15 mm thick cement and sand mortar (1:6) and joints grouted flush in cement and sand mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and as directed by Engineer-in-Charge.

M&L for flush pointing in cement mortar 1:3 on ceiling surfaces of stone patti roofs complete

M&L Preparing surfaces of plaster or unplaster new and applying three coat of white wash on ceiling

M&L Rendering 5mm thick on fair faces of conc. Surfaces in cement mortar 1:3,even and smooth w/o using extra cement as on ceiling.

S&F Vitreous china wash down water closet pan (pedestal pattern), white excluding flushing cistern and flush pipe) incl. P or S trap complete all as specified .

M&L for hardcore of broken brick or boulders of gauge n exc 63mm, deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface.

Taking down carefully existing unsv baten/ siurface conduit/ concealed conduit aluminium point wiring ( light, fan,bell/buzzer,socket or power) complete including removal of unserviceable fittings such as switches sockets, ceiling roses, pendents, sockets, lamp holders shades, fan regulators, light fittings, bell etc including sunken boxs and removing thr retrieved material from dismantling including making good and distrubed surface of walls, floors, ceilings etc to match with the adjoining work complete all as specified and as directed by Engr-in- charge.

Taking down of unsv DBs/switch fuses/ change over in sheet enclouser complete with MCB, fuses/ grips any capacity after disconnecting all cable and removing from site and making good distrubed surface of wall, floor etc complete all as specified and as directed by Engr-in-charge.

Point wiring with multi stranded copper conductor cable, 1100 volts grade (ISI marked) PVC insulated and unsheathed of size 1.5 Sq mm single core in and including new non-metallic rigid PVC concealed conduit, not less than 20 mm dia, medium duty ISI marked, including conduit fittings such as tees, bends etc terminating in and including new sunken box covered with and including 3 mm thick bakelite laminated sheet top cover of approved make for one fan or light or exhaust fan or bell/buzzer point controlled by one switch including provision of 1.5 Sqmm PVC insulated unsheathed copper conductor cable, multi stranded as earth wire to common earth & connecting to earth dolly complete all as specified and directed by Engineer-in-Charge.

All as per item No 130 here-in-before but socket point on the same board with other switches complete as specifed as directed by Engineer - In - Charge

All as per item No 130 here-in-before but socket point on independent board complete as specifed as directed by Engineer - In - Charge

All as per item No. 130 above but 4.0 Sqmm copper conductor cable for socket outlet 3/6 pin, 15 Amps with 2.5 sqmm copper conductor cable as earth wire complete all as specified and directed.

S&F Switch piano flush type single pole, one way 5 Amps complete all as specified & directed.

S&F for socket outlet 2 in 1 ,5 pin 5 Amps, 5 Pin flush type complete all as specified & directed.

S&F for socket outlet 2 in 1 , 5 Pin 5 & 15 Amps, 230V complete all as specified & directed.

S&F Switch piano flush type single pole, one way 15 Amps complete all as specified & directed.

M&L for Ceiling rose surface bakelite 63.5 x 20 mm, three terminals complete all as specified and directed by Engr -in- Charge

Supply and fix PVC angle holder with LED bulb of capacity 09 watt complete as specified. Make :- C&S/Havells Cat pt No.LTHPLEDLAMP5W/B22

S & F LED tube light fittings 20W LED 6000K (4 ft.) wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic dirver etc, complete with all accessorie of Make:- Havells Cat pt No ENDURALINEARNEOBS20WLED830SPCWH/C&S Cat pt No LTDC01220WLED/WD 20W

S & F LED bulk head made up corrosion resistant unbreakable polycarbonate housing factual impact dust and water resistant luminaries with LED bulb 7 watt etc, complete with all accessorie of Make:- Cat pt No HLPLEDBH10W(CW) or equivalent

Supply and fixing Exhaust fan 450 mm sweep with louver work and connecting up including three core PVC insulated multi stranded copper conductor cable of size 1.5 Sqmm wire from ceiling rose/connector to fan of length not less than 1.0 meter complete all as specified and directed.

Supply and fixing ceiling fan 1200 mm sweep and connecting up including three core PVC insulated multi stranded copper conductor cable of size 1.5 Sqmm wire from ceiling rose/connector to fan of length not less than 1.0 meter complete all as specified and directed.

Supply and fix MCB DBs single pole and neutral 8 way SPN 230 Volt single door complete all as specified and directed.

Supply and fix MCB SPN of capacity 32 Amp 240 Volt complete all as specified and directed. Make :- Havells/Indo Asian/C&S Cat Pt No :- CSMB1B32N

Supply and fix MCB SP ' C' series of capacity 6-32 Amp 240 Volt complete all as specified and directed. Make :- Havells/Indo Asian/C&S Cat Pt No :- CSMB1B10

Local tibba dry sand cushioning and cover (8 cm thick layer of sand before laying of cable and 15 cm thick layer of sand after laying of cable) for protection of cable, material and labour complete all as specified and as directed by the Engineer-in-Charge.

Supply & Laying sub class `B’ burnt bricks old size over the LT cable having compressive strength not less than 50 Kg/Cm2, laid in trenches with width equal to width of the brick laid flat for protection of cable complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 2 core

Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 6 mm dia MS bars both ways complete all as specified & directed by Engineer-in-Charge.

Supplying, laying, jointing and testing ductile iron pipe spigot & socketed size 200 mm dia, class K-9 suitable for rubber tyton joints duly ISI marked complete all as specified and directed by Engr-in-Charge. Note:- Excavation and earth work and joints shall be measured and paid separately.

Dismantling and taking out exisitng rusted/corroded DI pipe of size 200 mm bore spigot and socketed ends of any length & type including cleaning the pipe from inside & out side properly by removing rust & mud and including supply & fix fittings as required , fixing ,connetng to existing pipe line in trences and testing after completion all as directed.

laying only & jointing and testing ductile iron pipe spigot & socketed size 200 mm dia obtained from dismantling vide item above all as specified and directed by Engr-in-Charge. Note:- Quoted rate includes for new DI fittings .

M&L Rubber tyton push on gasket joints in spigot and socketed DI pipes and fittings of 150 mm dia bore complete all as specified and directed.

SHREE GURU NANAK CONSTRUCTION COMPANY