Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.0 LAccepted-AOC C O PULAK SAHA MAHAKAL PALLY SURYASEN PARK MAIN GATE SILIGURI 734001 DIST DARJEELING | JALPAIGURI | WEST BENGAL | 734001 | L1 | Accepted-AOC AOC | |
| 2 | L2₹41.8 L+₹98,419.46 (2.41%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹41.8 L+₹1.0 L (2.48%)Rejected-Finance SHATYAM APPARTMENT 35 BALAI DAS CHATTERJEE ROAD HAKIMPARA SILIGURI 1 | JALPAIGURI | WEST BENGAL | 734001 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹42.4 L+₹1.5 L (3.75%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹42.7 L+₹1.9 L (4.64%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
12 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SEVOKE ROAD
GE Sevoke Road Post Salugara Dist Jalpaiguri PIN 734008
CONSTRUCTION OF STORE ROOM AND STORAGE SHED AND CERTAIN MINOR WORK AT SEVOKE STN UNDER GE SEVOKE ROAD
2022_MES_546507_1
GE/SEV/30 of 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE SEVOKE ROAD
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
GE SEVOKE ROAD
₹80,000
Yes
17 Oct 2022
20 Aug 2022
14 Sept 2022
20 Aug 2022
12 Sept 2022
5 Sept 2022
21 Aug 2022 - 30 Aug 2022
Amount
Surface dressing n exc 15cm deep getting out in soft/loose soil complete all as specified and directed.
Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr deep in soft/loose type soil getting out complete all as specified and directed
M&L for PCC 1:3:6, type C-2 (using 40 mm graded crushed stone agg) as in foundation, filling and mass concrete complete all as specified and directed.
M&L for brick work with fly ash bricks straight or curved on plan exc. 6mtr mean radius, built in cement mortar 1:6, complete all as specified and directed.
M&L for Brick work with sub class 'B' bricks, straight or curved on plan to any radius radius built in CM 1:4 complete all as specified and directed.
M&L for 40mm thick PCC (1:2:4) type B0(using 12.50mm graded crushed stone aggregate) as in DPC to horizontal or verticle surfaces including necessary formwork complete all as specified and directed.
M&L for applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu.m per sqm complete all as specified and as directed.
Use and waste formwork to sides of concrete foundations, plint beams for rough finished flat surfaces of concrete complete all as specified and directed.
M&L for Reinforced cement concrete (nominal mix) 1:2:4 type B-1 (20 mm graded crushed stone aggregate) in Foundations,footings, foundation beams; bases for columns, etc.; and mass concrete complete all as specified and directed. (Note: Reinforcement and form work shall be measured and paid separately).
Use and waste formwork to sides and soffits of floor or roof beams, beam hunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams for rough finished, flat surfaces etc complete all as specified and directed.
M&L RCC 1:2:4 , type B1, 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span and lintel band, roof band and other similar items including form work all as specified.
Use and waste formwork to sides of pillars. posts. struts. piers. columns and stanchions for rough finished flat surfaces of concrete, square or rectangular complete all as specified and as directed.
Use and waste formwork to chajja and the similar work flat, slab supported on walls rough finished surfaces of concrete complete all as specified and directed.
M&L for Reinforced cement concrete (nominal mix) 1:2:4 type B-1(20 mm graded crushed stone aggregate) as in columns, pillars ,piers, post and struts complete all as specified and directed. (Note: Reinforcement and form work shall be measured and paid separately).
M&L for Reinforced cement concrete (nominal mix) 1:2:4 type B-1(20 mm graded crushed stone aggregate) as in chajjas complete all as specified and directed. (Note: Reinforcement and form work shall be measured and paid separately).
M&L for RCC 1:2:4 type BI (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and coloumn in floors, roofs, landings, balconies, conopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incuding cranking, bending spirally for hooping for columns, hooking ends and binding with and incuding mild steel wire (annealed), not less than 0.9mm dia or securing with clips complete all as specified.
All as per item No.17 above but 5 mm dia and over up to and including 10 mm dia as in stirrups, spacers and binders complete all as specified and as directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in each layer in soft/ loose soil complete all as specified and directed
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
M&L for 75 mm thick Sand filling under floors including watering and consolidation complete all as specified and directed.
M&L hardcore of broken stone or boulders of gauge not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 100mm thick PCC (1:2:4) type B-2 (using 40mm graded mechanically crushed stone aggregate) as sub base of flooring complete all as specified and directed.
M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15mm thick screed bed or beding layer of cement motor 1:6 for fixing of stone complete all as specified and directed.
S&F mild steel screw bolts, 12mm dia (machine made) with hexagonal heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, exceeding 15cm and not exceeding 22.5cm long complete all as specified.
M&L rendering 15mm thick in CM 1: 6 on fair faces of brick masonary walls finished even & smooth without using extra cement complete all as specified and as directed.
M&L for 20 mm thick rendering on fair faces of brick work in CM 1:4 in two layers of 10mm each using water proofing compound in top layer only including finishing the surface even and fair(WPC shall be measured and paid seperately) complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and as directed.
M & L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over one coat of primer over and including 1mm thick wall care putty ,complete all as specified and directed.
M & L for preparation of new plastered surfaces of walls and applying three coat of white wash, complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of suitable primer on new surfaces of walls complete all as specified and as directed
S&F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe 410 W Gde-E 250) Quality A complete all as specified and as directed.
S&F steel work in tubular trusses including special shaped washer etc completed using ERW or induction butt wilded tubes confirming to IS 1161-1998 grade St - 240 complete all as specified and directed.
S&F rolled mild steel Roof trusses (framed), trussed, purlins, crane, gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc( Fe 410-W Gde-E-250) quality A Including preparation of surface and one shop coat of zinc chromate primer at contractors workshop before fabrication complete all as specified and directed by Engineer-in-Charge..
M&L for preparation new steel surfaces of any description and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, with glazing bars, dovetailed or welded including one shop coat of zinc chrome primer complete all as specified and directed.
S&F 3mm thick sheet glass pin head type and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.
S&F factory made Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified in SSR Part I and directed
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.
S&F 0.63mm thickness, plain galvanised, mild steel sheeting, with 275 grams per sqm zinc coating as in ridges, hips, valley gutter, drip and straight flashing (as in crumple joints) complete all as specified and as directed.
S&F Mild steel, flat iron works, bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlines to steel trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles complete all as specified and as directed.
M&L for mild steel expanded metal cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanised steel stapless supplied and fixed complete to wood or steel members n .exc 4 kg/sqm complete all as specified.
M&L for precast RCC 1:2:4, type B1 (using 20mm graded crushed stone aggregate) as in cover slab set in CM 1:6 including necessary formwork complete all as specified and as directed
M&L for 200 mm nominal dia DWCPE pipe (SN-8) pipes ISI marked laid in trenches and jointed complete as specified and directed.
M&L for 150 mm nominal dia DWCPE pipe (SN-8) pipes ISI marked laid in trenches and jointed complete as specified and directed.
M&L fo PCC 1:3:6 (type C-2) (using 40mm graded crushed stone aggregate) as in bed for drain pipes including packing under and hauncing against the sides of pipes after they are laid and tested for 200mm bore pipe complete all as specified and directed.
S & F 150 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls with clamps & bolts, etc complete all as specified & directed.
S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls with clamps & bolts, etc complete all as specified & directed.
S & F 150 mm bore PVC (SWR) bends with door of any radius complete all as specified & directed.
S & F 150 mm bore PVC (SWR) (Single `T') equal or unequal with access door complete all as specified & directed.
S & F 110 mm bore PVC (SWR) bends with door of any radius complete all as specified & directed.
M&L PCC 1:3:6 type C-2 (using 40 mm gradded crushed stone aggregated) as in surface channels and drains complete all as specified and as directed.
Extra for forming fair finished drain or channel n exc 30 cm inner grith in cement concrete using extra cement including forms moulds mitred stopped end complete all as specified and as directed.
S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock, strick plate, etc Size of frame 105 x 60 mm including providing one shop coat of zinc chrome primer complete all as specified and directed.
S & F flush sutters, 35mm thick solid core contruction, with block board core and plywood face panels,commercial type on both sides complete all as specified and directed.
S&F 605X605mm anodised aluminium snap grid frame work for false ceiling including 2.5mm dia mild steel wire galvanized class 3, @ 60cm centre to entre and fixed to steel or wooden member including 4mm thick non asbestos fibre cement boards fixed or laid/ inserted to aluminium frame work as in ceiling complete all as specified and directed. Note:- The size of aluminium main and croos tee shall be 40mm x25mm x2mm and size of angle shall be 25mm x 25mm x 2mm)
M&L 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection & paving finished even & smooth without using extra cement complete all as specified and as directed.
M&L for chequered cement concrete tiles 30cm x 30 cm x 25 mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry in floor with grey cement mixed with pigments to match with the colour of tiles, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.
M&L for 10mm thick rendering on other than fair faces of brick or concrete surfaces in CM 1:3 mixed with water proofing compound @3% of cement, finished even and smooth without using extra cement complete all as specified and as directed.
M&L for coloured Non-skid ceramic tiles 7mm thick (square/ rectangular) area exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 15mm thick cement mortar screed bed in CM 1:6 etc, complete all as specified and directed.
M&L40mm thick cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in floors and paving complete all as specified and as directed.
S & F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening as per specification & drawing complete all as specified and directed.
S&F Factory Made Solid Panel PVC Door Shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet shall be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, as per specification & drawing complete all as specified and directed.
Surface excavation n.exc 30cm deep and averaging 15 cm deep in soft/loose soil and getting out complete all as specified and as directed.
Excavation over areas not exc 1.50m in depth in soft/loose soil and getting out complete all as specified and as directed.
Excavation over areas exc 1.50m & n.exc 3.00 m in depth in soft/loose soil and getting out complete all as specified and as directed.
M&L for PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregated) as in foundation, filling and mass concrete complete all as specified.
M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base of floor including 50 micron polythene film laid complete all as specified and as directed.
M&L for coloured Non-skid ceramic tiles 7mm thick (square/ rectangular) area exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 15mm thick cement mortar screed bed in CM 1:6 etc, complete all as specified and directed.
M&L for coloured 450x350x7 mm thick glazed ceramic tiles on vertical surfaces such as skirting,dado and risers to steps etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thick cement mortar backing coat in CM 1:4 etc, complete all as specified and directed.
S&F vitreous china bowl urinal flat back size 465x355x265mm white (minimum) with gratings and union of discharge pipe ( excluding flushing cistern, flush pipe andwaste pipe ) etc complete all as specified and as directed.
S&F (EWC) Vitreous China wash down water closet pan (pedestal pattern), size 570x460x380 mm with 'P' or 'S' trap white including fixing bolts, plastic water closet seat and cover closed pattern with flat bottom, and mild steel chromium plated or alluminium anodised hinging device, making all necessary connections and making good the disturbed surfaces of floor complete all as specified and as directed. Cat part No S1050106 S Trap for seat and Cat No B1510120 ceranglo delux for seat cover of make cera or equivalent from list of makes.
S & F in repairs flushing cistern, 10 Ltrs. Capacity, PVC valveless, syphonic action type with dual flushing system, low level,white with inlet, ball valve,float and handle including brackets, flush pipe of polyethylene PVC 32mm dia, complete all as specified and directed.
S&F wash hand basin, vitreous china white of size 550 x 400mm excluding taps, waste chain and plug and porcelain stopper but including brackets, 32mm dia waste fitting brass chromium plated and PVC waste pipe 32mm bore etc complete all as specified and directed.
S&F PVC connection pipe 15 mm dia, 450 mm long with PTMT nut complete all as specified and as directed
S&F 15 mm bore medium grade galvanized steel water tubing with all fittings and fixed to walls or laid in floor complete all as specified.
S&F 20 mm bore medium grade galvanized steel water tubing with all fittings and fixed to walls or laid in floor complete all as specified.
S&F aluminium anodised barrel tower bolts of extruded section, 150mm long, complete all as specified and directed.
S&F aluminum handles, cast type, anodized 125mm long complete as specified and directed.
M&L for providing precast cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) in louvered and jallies 40 mm thick (measured solid) including all mouldings but excluding frame set in CM 1: 4 complete all as specified and as directed.
S& F 15 mm bore bib tap cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe complete all as specified and directed.
S&F 15 mm bore Pillar tap cast copper alloy with capsten head chromium plated fancy type screwed down high pressure with or without letter hot or cold with long screwed shank and flynuts screwed for iron pipe complete all as specified and directed.
S&F CI floor trap dia of outlet 100mm, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F Brass chromium plated towel rail, , 600cm long including fittings complete all as specified and as directed.
S& F 15 mm bore angular stop cock cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks 1000 Litre capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including provision of necessay fittings for connection the overflow, drain out, inlet and outlet pipes, complete all as specified and as directed.
S&F 20mm bore gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipes, complete all as specified and directed.
S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed.
Excavating in post holes (or similar holes) in soft/ loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and as directed.
S&F pre-painted galvalume aluminium Zinc coated GI based, steel sheet 0.50 mm thick colour coated Mangalore pattern tile profile of any colour sheet having tensile strength of 345 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.
S&F rolled mild steel section including hollow section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates. Complete all as specified and directed.
M&L for matt finish heavy duty vitrified parking tiles 30cmx 30 cm x, 15-20 mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigments over and inluding 15 mm thick screed bed or bedding layer of 1:6 complete all as specified and as directed.
S&F 12 mm thick frameless double leaf toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot and cover plates with brass pivot and single piece M.S sheet outer box with slide plate etc and making necessary holes etc for fixing required door fittings and lock, incl door handle lock and stopper floor spring etc complete all as specified and as directed.
M&L 20mm thick granite slabs of any type (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking platforms and like in cement mortar1:4 including pointing in white cement (1:2) using marble dust with admixure of pigments to match with shade of granite complete all as specified and as directed.
Supplying fitting and fixing double leaf heavy duty iron gate frame made from 50mm x 6mm M.S flat iron with another horizontal flat at the middle 50 x50x6mm angle , 20 mm dia M.S bars at 200mm apart from bottom flat to top flat and 20 mm dia M.S bars at 200mm apart from bottom flat to middle flat including drilling, welding etc complete all verticle bars are to be protruded at least 100mm above the middle and top flat is to be flattended and pointed as directed. nacessary locking arrangements on both faces, arrangements for tempoary closing the gate and 2 nos (minium) strong iron hinges of M.S bars and flat of same sizes on each leaf to be embeded in RCC pillars as necessary including a red oxide painting to all iron works as directed and specified (separtae payment will be made for RCC posts)
Cutting chases in brickwalls girth exc 10 cm but n exc 20 cm , pinning in making good to facings where required and pointing in cement mortar 1:3 for conceal water tubing etc and making good complete all as specified.
S&F galvanized mild steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
M&L for cement concrete of 1:3:6 Type C-1 using 20 mm graded crushed stone aggregate as in filling of pressed steel frame, (lintel, copings, hold fast block etc) complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
M&L for 2nd class hard wood fillets area exc 12 sqcm but n. exc 25 sqcm wrought square or rectangular in section plain or bull nosed, splayed chamfered or rounded on one edge or face fixed with nails complete all as specified and as directed.
S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock, strick plate, etc Size of frame 125 x 60 mm including providing one shop coat of zinc chrome primer complete all as specified and directed.
M&L for 2nd class hard wood plain, solid, straight chowkats and frames wrought wrought, framed rebated on the solid chamfered or rounded put together with glue pinned at joints supplied and fixed complete all as specified and as directed.
S&F factory made 35mm thick 2nd class hard wood (Hollock/Sal/Kalasiris), Kiln seasoned and chemically pressure treated, glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars), edges, of framing plain, chamfered or rounded, fitted with cut and mitred bends for securing glass etc, sizes of members of shutters as specfied in SSR Part I, Section 8, cluase 8.24 (a) ; supplied and fitted to chowkats complete all as specfied and directed.
S&F mild steel tower bolts stove enamelled black with bright bolt 200 mm long complete all as specified and as directed.
S&F 300 mm long mild steel sliding door bolts plate type stove enamelled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts nuts, four on bolts plate & two on staple plate complete all as specified and as directed.
S&F mild steel pressed handle oval type stove enamelled black 150 mm long complete all as specified and as directed.
S&F Mild steel butt hinges medium weight cold rolled of size 75mm complete all as specified and directed.
S&F Mild steel butt hinges medium weight cold rolled of size 100mm complete all as specified and directed.
M&L for concealed point wiring with two single core PVC insulated, unsheathed, multistranded copper conductor FRLS of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and including PVC rigid conduit (medium grade) with all fittings & accessories including provn of MS sunk terminal box of appropriate size suitable for switch fixed flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / call bell complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates.
All as per Item Sl No - 113 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A switch-socket point on independent board complete.
All as per Item Sl No - 113 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 2.50 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 2.5 sqmm green in colour as earth lead for 15/16 A switch-socket point on independent board complete.
All as per Item Sl No - 113 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A socket point with switch on same board complete.
M & L for Switch Socket combination 3 Pin, 5 Amp flush type universal, 240 volts, complete as directed.
M & L for Socket outlet 3 Pin, 5 Amp flush type universal, 240 volts, complete all as specified all as directed.
M & L for Switch Socket Combination 5 in 1, 3 pin, 5 and 15 Amp flush type universal, 240 volts, complete all as specified and as directed.
S&F piano switch single pole 5 Amp 230 Volt all as specified and as directed.
S&F ceiling rose ,surface bakelite 65mm x 50mm size with three terminals all specified and as directed.
S&F decorative box type fitting with LED tube 20 watt 4 feet with Al extrudedbatten luminaire for 230 volt AC complete all as directed by EIC.
M&L LED street light of capacity 40 watt in Aluminium PDC housing, with IP66 protection complete all accessories with frame and connecting PVC copper wire not exc 5 mtr complete all as directed.
S&F energy efficient BLDC (26 Watt) ceiling fan 230V, 1200 mm sweep without remote with all accessories and connecting up with the ceiling rose with required flexible wire of suitable size with ceiling fan complete all as specified and as directed.
S&F electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 sweep/1400 mm, 120 Watt complete all as specified and directed.
Supply & Fixing DB with sheet metal enclouser 240 volts, 12 way, SPN double door for MCB, including cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed.
Supply & Fixing MCB double pole (DP) 240 volts of capacity 32 Amp ,C curve, complete all as specifie and as directed.
S&F MCB, SP, 10KA, 415V, "C" curve, 06-32 A, ISI Marked complete all as directed.
M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (in vertical position ) earth pit not less than 2.25 mtrs below normal ground level with the top edgeof the earth plate not less than 1.5 mtr (B.G.L.) & connected to galvanised iron wire 4 mm dia by means of bolts,nuts,checknuts & washer of galvanised iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made of 6 mm round bar, including necessary excavation & earth work in any type of soil , 20 mm dia med grade galavinised steel tube for watering with one end fixed with cast iron funnel & wire mesh, 15 mm bore light grade galvanised steel tubing up to 7.5 mtr length for drawing earth lead including common salt , charcoal in alternate layers etc. complete all as shown in EP no 3 of SSR Part 1 & testing on complection incl taking down old unsv earthing complete.
Supply & Fixing DB with sheet metal enclouser 240 volts, 04 way, SPN double door for MCB, including cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed.
S&F decorative box type fitting with LED tube 09 watt 2 feet with Al extrudedbatten luminaire for 230 volt AC including LED tube 9 watt complete all as directed by EIC.
S&F exhaust fan AC, single phase, 230/240 V, of size 230 mm sweep metal body with louvers including making holes on wall & making good the distrubed surfaces with all connecting arrangements complete all as specified and directed.
Supply and laying galvanised steel water tubing Medium grade 25mm bore including all fittings laid in trenches complete all as specified and as directed.
S&F Gun metal gate valve 25 mm bore complete all as specified and as directed.
Supply and laying in trenches/wall LT UG XLPE insulated,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 10 sqmm 2 core including making necessary connections all as specified and directed.
Supply & laying in trenches clear sand for cushioning under cable 8 cm below and 15 cm above complete in level all as specified and directed by Engr-in-Charge. Note:- Punned thickness shall be measured.
Supply and laying burnt clay sub class B brick as cable protection all as specified and directed.
Supply and fixing GI pipe 40mm bore light grade for cable protection complete all as specified and as directed.
M S ALOK SAHA
M/S SUBRATA JOARDAR
SRI SURAJIT SENGUPTA
LIBERAL ENGINEER CONSTRUCTION
ASSOCIATED TRADING CORPORATION
TAPASH SAHA
M/S TARAN INFRACON
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .