Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹72.6 LAccepted-AOC 25 13 1 AMBEGAON PATHAR PUNE 411046 | PUNE | MAHARASHTRA | 411046 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹74.8 L+₹1.8 L (2.48%)Rejected-Finance | L2 | Rejected-Finance Other than being lowest | |
| 3 | L3₹79.9 L+₹6.9 L (9.41%)Rejected-Finance OFFICE NO 25 3RD FLOOR ONLOOKER BUILDING SIR P M ROAD FORT MUMBAI 400 001 | MUMBAI | MUMBAI | MAHARASHTRA | 400001 | L3 | Rejected-Finance Other than being lowest | |
| 4 | L4₹79.9 L+₹6.9 L (9.46%)Rejected-Finance 302 SIDDHIVINAYAK APPT A WING MUMBAI K K MARG JACOB CIRCLE MUMBAI CITY MAHARASHTRA 400 011 | MUMBAI | MAHARASHTRA | 400011 | L4 | Rejected-Finance Other than being lowest | |
| 5 | L5₹81.4 L+₹8.4 L (11.5%)Rejected-Finance 604 PRASHANT VRISHI COMPLEX HOLY CROSS STREET I C COLONY BORIVLI W MUMBAI 400 103 | MUMBAI | MUMBAI | MAHARASHTRA | 400103 | L5 | Rejected-Finance Other than being lowest |
Tender Value
Refer Docs
EMD Value
₹2.1 L
Closing Date
16 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
CERTAIN MISCELLANEOUS REPAIR AT SBW JETTIES ACD AND PIM DOCK AT NAVAL DOCKYARD MUMBAI UNDER GE NW KUNJALI COLABA MUMBAI
2023_MES_632934_1
8592/CWE (NW) Mumbai/E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) Kunjali
Class B Category a(i)
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) Kunjali
₹2.1 L
Yes
28 Feb 2024
15 Dec 2023
18 Jan 2024
15 Dec 2023
16 Jan 2024
4 Jan 2024
15 Dec 2023 - 28 Dec 2023
Amount
Dismantling wrought or mild steel work of any description complete all as specified and directed by Engineer in Charge.
Demolition of plain cement concrete of any description and in any position not other wise specifically provided for complete all as specified and directed by Engineer in Charge.
Demolition of reinforced cement concrete of any description and in any position not other wise specfically provided for complete all specified and directed by Engr-in-Charge.
Taking down cement plaster on birck/surfaces built in cement mortar including raking out joints, bading for key scrubbing down with water etc complete all specified and directed by Engr-in-Charge.
Dismantling timber scantlings 40 sq. cm and over in section, in any position in unframed work. complete all as specified and directed by Engineer in Charge. Note :- Qty of timber which is not considered in schedule of credit shall be deposited to users store.
Supply & Fixing 1st class hardwood (TEAK WOOD) Plain, solid, straight, rebated on the solid, rounded or chamfered segmental size upto (5000mmx300mmx150mm to 300mm) as in wooden coping complete all as specified and directed by Engineer in Charge.
Material and labour for MS anchor bolt fasteners of size 300mm long and 25mm dia including drilling holes in timber, concreting and grouting complete all as specified and directed by Engineer in Charge.
Supply and applying microconcrete aroung edges of Dock walls, jetties, corners, grooves, alters, steps, piers and other marine structure after complete cleaning of concrete surface and applying epoxy coat as bonding agent Fosroc's Nitobond or equivalent for bonding between old and new surface, including all lifts, shuttering all as required as per site condition and complete all specified and directed by Engr-in-Charge. Make-FOSROC, Dr FIXIT, Choksey Chemical Pvt Ltd, Sika India Pvt Ltd
Material & labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing 40mm thick polymer plaster (1:5:15, cement, sand, polymer) and finally finishing the surfacecomplete all specified and directed by Engr-in-Charge. Make-FOSROC, Dr FIXIT, Choksey Chemical Pvt Ltd, Sika India Pvt Ltd Note :- (New reinforcement and MS Sections will be measured and paid separately)
Material & labour for taking down, chipping and removing the loose, spoilt, damaged cement concrete, cement mortor surfaces of RCC columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally covering with Microconcrete and finally finishing the surface complete all specified and directed by Engr-in-Charge. Make-FOSROC, Dr FIXIT, Choksey Chemical Pvt Ltd, Sika India Pvt Ltd Note :- (New reinforcement and MS Sections, microconcrete and form work if required will be measured and paid separately)
Supply only ready mix microconcrete mixture complete all as specified and directed Make-FOSROC, Dr FIXIT, Choksey Chemical Pvt Ltd, Sika India Pvt Ltd
Supply & fixing welded steel wire fabric, cut to length, fixed to steel members/reinforcement steel, weight per Sqm n exc. 4 Kg complete all as specified and directed by Engineer in Charge.
Material & labour for cleaning the surface of the stone/concrete in jetty , dock,retaining wall, piers of jetty and bottom portion of deck slab etc above sea with mechanical grinder and specialized water misting techniques applying water jet using a fine nozzle sprinkling system calibrated to spray a fine mist along the stone/concrete surface complete and removing all sea vegetation complete all as specified and directed by Engineer in charge. Note:- Quoted rate shall be inclusive of scaffolding or alternative way of carrying out the work with proper safety instruction required at site.
Material and labour for applying two coats of anti carbonation paint over a coat of primer over vertical concrete surface in jetty/dry dock above sea level all as specified and directed by Engineer in charge. Note:- Quoted rate shall be inclusive of scaffolding or alternative way of carrying out the work with proper safety instruction required at site.
Formwork to sides and soffits of floor or roof beams, haunchings, girders, bressummers, lintels cantilevers, shelves including supt-ports, overhangs, etc. Also splays between floors and beams, etc. rough finished surface of concrete complete all as specified and directed by Engineer in Charge.
Formwork to sides of pillars posts, struts, piers, columns and stanchions square, rectanguar or polygonal complete all as specified and directed by Engineer in Charge.
Material & Labour 10mm dia over mild steel TMT bars, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not lessthan 0.9mm dia or securing with clips etc complete all as specified and directed by Engr-in-charge.
-ditto- all as per item No 17.00 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders
Material & Labour for erection & dismantling of MS tubler double scaffolding (H frame) upto height of 30m & with necessary brazing, provision of necessary safety equipment to the skilled workers to carry out the work and covering with green cloths for carring out external face work of walls complete all specified and directed by Engr-in-Charge.
Material and labour for ready mix cement concrete in Pavement/Hard standing (PQC) M-40 of flexural strength of 40Kg/Square centimetre in field using minimum 400 Kg of cement per cubic metre laid in bays or as directed with and including steel formwork to sides of concrete spread including necessary recron as per manufacturer instruction , compacted and finished in a continuous operation etc complete all specified and directed by Engr-in-Charge.
Precast RCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in cover slabs and set in cement mortar 1:4, complete all as specified. (Reinforcement shall be measured and complete all specified and directed by Engr-in-Charge.
Supply and fixing rolled mild steel section of Grade FE 410-W, (Gde- E-250) quality-A, as in Plates (Plane or Chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed by Engineer in Charge.
Supply and fixing structural steel framed works such as angle, channel, grating, gate, ladder, purlin, rafter etc. Confirming to Fe-290, E-165 as in supporting structure of duct, drain edge etc including making good the disturbed portion of concrete surfaces with 1:2:4 type B-0 (using 12.5mm graded stone aggregate)complete all specified and directed by Engr-in-Charge.
Material & Labour for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finishing the surface fair and even complete all specified and directed by Engr-in-Charge.
Material & Labour for preparation of newly plastered surfaces of wall, applying two coats of Oil emulsion distemper over a coat wall care putty of 3mm thick and alkali primer complete all specified and directed by Engr-in-Charge.
Material & Labour for preparation of existing treatment on wall/ceiling surfaces and applying one coat of oil bond distemper complete all specified and directed by Engr-in-Charge.
Material & labour for preparation of old plaster/unplastered surfaces of wall/ceilling, applying one coats of 100% acrylic, weather resistant emulsion complete all specified and directed by Engr-in-Charge and as per manufacturer's instruction complete all as specified and directed by Engineer in Charge.
Material & Labour for preparation of old plaster/unplastered surfaces of wall/ceilling, applying two coats of 100% acrylic, weather resistant emulsion complete all as specified and as per manufacturer's instruction complete all as specified and directed by Engineer in Charge.
Material & Labour for epoxy base joint filler paint on external surfaces of walls/floor to fill the cracks with and including resin and hardner in proportion as per manufacturers instructions complete all specified and directed by Engr-in-Charge.
Material & Labour for applying 2mm thick thermoplastic paint any colour in letter writing, Nos, Dashes, Arrow line, etc all as per manufacturer's instruction and complete all specified and directed by Engr-in-Charge.
Material & Labour for preparation of new decorated wooden surfaces of any description over 10 cm width or girth, applying two coat of synthetic enamel paint over a coat of primer complete all specified and directed by Engr-in-Charge.
Material & Labour for preparation of old wooden surfaces of any description over 10 cm width or girth, applying a coat of synthetic enamel paint of approved colour complete all specified and directed by Engr-in-Charge.
Material & Labour for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of epoxy paints over a coat of red oxide primer complete all specified and directed by Engr-in-Charge.
Material & Labour for removal of rust on old steel surface and applying one of of antirust liquid of approved make and applying one coat of zinc primer complete all specified and directed by Engr-in-Charge.
Material & Labour for aplying two coats of epoxy paints on old steel surfaces complete all specified and directed by Engr-in-Charge.
Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, etc complete all as specified and directed by Engineer in Charge.
Material & Labour for brick work with sub class 'B' bricks (old Size) straight or curved on plan exc 6 m mean radius and built in CM (1:6) complete all as specified and directed by Engineer in Charge.
Precast cement concrete block masonry type B1, 1:2:4 (20mm graded stone aggregate) with solid block setting in cement mortar 1:6 complete all as specified and directed by Engineer in Charge.
RELIEVING STRUCTURAL MEMBERS:- Material & Labour for Relieving structrural members such as column, beam and slab of their superimposed loads partially or fully by provison of adjustable steel props, frames etc. including providing necessary timber runners, bracing, jacking up arrangement complete all specified and directed by Engr-in-Charge. (Note-Removing and redoing of brickwork, it required, shll be paid separately.)
FILLING AND REINSTATING OF STRUCTURAL CRACKS:- Material & Labour for Opening of separation Cracks at the Junction of RCC and Masonry wherever directed and instructed into V grooves 2" to 3" from the either side of the cracks by carefully marking the areas to be opened up using Cutting machine and skillfully/carefully/chiseling with a well sharpened chisel and hummer as directed including wire brushing and washing of concrete substrata and masonry walls with water jet to the surfaces thus prepared to the entire satisfaction of the complete all specified and directed by Engr-in-Charge.
Material & Labour for Stainless steel decoravtive railings (grade 316), staircase (design and pattern as approved made out of SS pipes, SS flats, SS plates etc. Complete with and including necessary welding , buffing/polishing and fixing complete all specified and directed by Engr-in-Charge.
Material & Labour for Stainless steel decorative railings chain alloy(grade 316), having any thickness (design and pattern as approved ) as used to connect two stainless steel post with hooks etc. Complete with and including necessary welding , buffing /polishing and fixing complete all as specified and directed by Engineer in Charge.
Providing and carry out waterproofing treatment (application) to basement retaining walls after removing of existing plaster, proper surface preparations to remove any loose dust, dirt, laitance, loose mortar etc, after treatment of construction joint, cold joints, cracks etc, pre dampening the concrete surface and application of two coats of Elastomeric waterproof coating etc. complete including all tools as per manufacturer's complete all specified and directed by Engr-in-Charge.
Material & Labour for brushing neat cement slurry with 3Kg of cement per square metre complete all specified and directed by Engr-in-Charge.
Material & Labour PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in roof, floor complete all specified and directed by Engr-in-Charge.
Material & Labour for rendering 20 mm thick cement plaster in CM (1:3) on roof top surface finished even and fair including WPC by weight of 3% of total cement content complete all specified and directed by Engr-in-Charge.
Supply only integral water proofing compound complete all specified and directed by Engr-in-Charge.
Material & Labour for Modular tensile fabric roofing Anti-Wrinkle, Attractive Design, with stainless steel nut bolt as per sample kept in GE (NW) Kunjali complete all specified and directed by Engr-in-Charge.
Material & Labour for priming @ 0.8 Kg per Sqm of finished concrete surface complete and an evenly a coat of cold bituminous at 1 Kg per Sqm and applying seating cloth over cold bituminous , finally paving bitumen of any penetration at 2.5Kg per Sqm complete all specified and directed by Engr-in-Charge.
Supply & fixing in repairs for coloured 10-12 mm Thick Non Slip Matte Finish Solid Stair Tiles area n exc 0.16 SQM each tile over 20mm thick screed bed in CM 1:4 with rapid setting cement complete all specified and directed by Engr-in-Charge.
Supply & fixing in repairs pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws complete all specified and directed by Engr-in-Charge.
Removing excavated material & debris exc. 1.50 Km but n exc. 15 Km and depositing where directed, in soil & complete all specified and directed by Engr-in-Charge.
jalandhara construction
Idustrial products India
the bhimani group of companies
C S Sharma and Co
Nilesh Construction
RAJENDRA CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .