Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance MIRZAPUR MUMTAZ NAGAR AYODHYA AYODHYA UTTAR PRADESH 224001 | AYODHYA | UTTAR PRADESH | 224001 | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹18.9 L
EMD Value
₹18,950
Closing Date
24 Jun 2025, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Superintending Engineer
Superintending Engineer Electricity Distribution Circle-Unnao
Quantum of works in widening and strengthening of Ganjmuradabad Sarai Sultan Darukuiya-Nayagaon road and removal of electric poles in district Hardoi under deposit scheme under Electricity Distribution Division Bangarmau, Unnao.
2025_MVVNL_1026820_2
06/E.D.C./Unnao/2025-26
Open Tender
Electrical Works
Fixed-rate
180 days
Unnao
as per tender document
2 documents required · 2 mandatory
₹3,540
A/C-No.3355002101008374,IFSCCode- PUNB0335500
₹18,950
1 Jul 2025
17 Apr 2025
25 Jun 2025
17 Apr 2025
24 Jun 2025
17 Apr 2025
Amount
Safe loading carriage including unloading & proper stacking of following store materials from any Electy.Store of Raebareli Zone (Unnao) to work site/JE Dump Store.
PCC pole 8.5 mtr Long
S.T POLE 11MTR. LONG
11K.V XLPE CB. 3X185MM
11KV XLPE CB. BOX O/D 3X185MM
TOP CHANNEL
Earthing Complete
Stay Camplete
G.I WIRE 10 SWG
BASE ANGLE
DROPPER CHANNEL 100X50MM
11KV DISC FITTING (B&S) 70KN
11KV COMP. POLY. PIN INSULATOR
11KV COMP. POLY. GI PIN
DANGER BOARD WITH CLAMP
G.I BARBED WIRE
ACSR WEASAL COND.
ACSR DOG COND.
11KV V-TYPE X-ARM
X-ARM HOLDING CLAMP FOR STP
Holding Clamp TOP & DROPPER with Nuts & Bolts)
11KV F-CLAMP FOR STP
33K.V XLPE CB. 3X300MM
33KV XLPE CB. BOX O/D 3X300MM
11KV DISC INSULATOR 40KN
33 KV PIN INSHULATOR
33 KV GI PIN WITH NUT
33 KV V-TYPE X-ARM
33 KV F-CLAMP
Erection of the following support through digging pits complete in all respect including cutting, making holes, fixing of all types of accessories as per RESSPO/REC drawing. (All type of clamps nut & bolt, washer to be provided by contractor.)
Providing & Fixing of Stone Pad (300x300x75 mm)
33 KV Single support of ST Pole 11mtr long.with X Arm, Pin insulator with all accessories as required.
33 KV Double pole structure on S.T. Pole 11mtr long complete with Top Channel, bracing & all other acessories as required
33 KV Cable Exposer Double pole structure on S.T. Pole 11mtr long complete with Top Channel,bracing. & all other acessories as required
Four Pole structure on ST Pole 11mtr long complete with Top Channel,bracing.& all other acessories as required
11 KV Single support of ST Pole 11mtr long./ PCC PLE 8.5 MTR LONG with X Arm, Pin insulator with all accessories as required.
11 KV Double pole structure on S.T. Pole 11mtr long complete with Top Channel, bracing & all other acessories as required
Concreting of supports with cement, concrete (CC will be of cement coarse sand & Stone Grit) Grouting will be done with the help of wooden/steel formers in a block of size 450 mm x 450 mm x 1/6 of the full length of the support in the CC 1:4:8 ratio and plinthing of supports upto 300mm above ground level as per RESPO/ RES. drawing including back filling and proper ramming.
Earthing of supports with Earth Electrode 2.5 mtr. length including excavation of pit and driving M.S. Rod upto proper depth and connecting the earth electrode with the help of 6 SWG G.I. Wire and earthing lugs. RESPO/ RES. drawing.Earthing of each section pole is also to be done. (All type of clamps nut & bolt, washer to be provided by contractor.)
Erection/fixing for 33 KV /11 KV Stay set with stay wire 7/8 SWG and clamp as per RESSPO drawing including binding, clambing, clamping, tightening, and nozzeling etc. complete in all respect including its grouting in size 0.60x0.60x0.3 mtr. ratio 1:4:8 of cement, sand and concrete (CC will be of cement coarse sand & Stone Grit). (All type of clamps nut & bolt, washer to be provided by contractor.)
Laying, spreading, lifting, Stringing, jointing and final sagging of ACSR Dog Conductor in accordance with profiles and sag chart including binding, jumpering and fixing of all accessories in 3 nos. conductor in parallel with PG Clamp binding wire etc as requested for job.
Laying, spreading, lifting, Stringing, jointing and final sagging of ACSR WEASAL CONDUCTOR in accordance with profiles and sag chart including binding, jumpering and fixing of all accessories in 3 nos. conductor in parallel with PG Clamp binding wire etc as requested for job.
Painting of following supports with one coat of red oxide primer and two coats of aluminum white paint of ISI mark and top danger portion of each support must be painted by providing two coat of Post Office Red Paint (1.5mtr upper portion of support.) Paint and material would be given by contractor to complete of job. (All materials to be provided by Contractor).
Single Pole of 11 M S.T.P
Double Pole of 11 M S.T.P
Four Pole of 11 M S.T.P
Providing & Fixing of 33 KV & 11 KV SMC Danger board ( as per RESPO/REC)with Clamp & Nut Bolt
Providing & Fixing of 33 KV & 11 KV SMC Number Plate ( as per RESPO/REC) with Clamp & Nut Bolt
Providing & Fixing of G.I. Barbed wire (2 Kg./pole)
Looping of branches of trees along the route of Line and disposal of the same after obtaining permission of competant Authority.
Laying & dressing of 33 KV 3x300 Sq.mm XLPE cable and Laying & dressing of 11 KV 3x185 Sq.mm XLPE cable (Double CKT.) by excavation of trench in the ground of size 700mm wide, 1200mm deep providing 150mm fine sand cushion below the cable. The cable shall be duly protected by bricks, sand & stone slab and refilling & ramming of the left out soil. Spare cable shall be left and buried in the trench in the shape of rings at both ends. Cable laying work includes unrolling, cutting, making ring and sealing both ends of the cable. (All decentralised materials to be provided by Contractor).
Laying of 3x300 Sqmm 33 KV and 3 X185 SQMM KV, XLPE insulated U/G Cable in HDPE/G.I. Pipe size of 150 mm dia single circuit in open spaces with proper clamping, bolting and grouting (All material include HDPE Pipe to be provided by contractor).
Hoisting of 33 KV 3X300 Sq. mm. / 11 KV 3X185 SQMM XLPE cable on double pole including G.I. pipe of size 6" dia 3 M long and its jumpering complete with clamps, nuts and bolts. (All material include GI Pipe to be provided by contractor).
Cable Route Marker
High Pressure Testing
Dismantling of 33KV/11KV/3phase H.T. line on existing pole including rolling back its conductor/G.I. wire from work site to dump site.
Hindustan Electric Work (BID ID -5230171)
Pankaj Trading Company (BID ID -5270276)
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .