Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.7 LAccepted-Finance WZ143 A 7 A S 4 43 GALI NO 2 OLD MAHABIR NAGAR NEW DELHI 110018 | NEW DELHI | NEW DELHI | DELHI | 110018 | L1 | Accepted-Finance BEING LOWEST | |
| 2 | L2₹23.0 L+₹2.3 L (10.9%)Accepted-Finance E 30 RAJIV NAGAR BEGUMPUR NEW DELHI 110086 | NEW DELHI | NEW DELHI | DELHI | 110086 | L2 | Accepted-Finance BEING NOT LOWEST | |
| 3 | L3₹27.7 L+₹7.0 L (33.8%)Accepted-Finance 137 3 STREET NO 4 RAJINDER NAGAR DEHRADUN UK 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L3 | Accepted-Finance BEING NOT LOWEST | |
| 4 | L4₹28.4 L+₹7.7 L (37.2%)Accepted-Finance PLOT NO 10 9 OM VIHAR PHASE 1 A UTTAM NAGAR NEW DELHI 110059 | WEST DELHI | DELHI | 110059 | L4 | Accepted-Finance BEING NOT LOWEST | |
| 5 | L5₹29.5 L+₹8.8 L (42.6%)Accepted-Finance | L5 | Accepted-Finance BEING NOT LOWEST |
| Sl No | Description | Qty | Unit | M/S ANIL KUMAR L3 | B. S BUILDERS L8 | Lamba Enterprises L4 | PG CONSTRUCTION AND COMPANY L6 | yameen enterprises L5 | M/S Sunil Steel Works L1 | GIAN ENGINEERS L2 | M/S ADHIKARI CONSTRUCTION CO. L7 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down cement plaster, terrazzo dado in any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish,vegitation outside complex (MOD land), complete all as specified. | 1,200 | Sqm | 5 ₹6,000 Lowest | 10 ₹12,000 | 5 ₹6,000 Lowest | 20 ₹24,000 | 5 ₹6,000 Lowest | 10 ₹12,000 | 10 ₹12,000 | 9 ₹10,800 |
| 2.00 | M&L for rendering 15mm thick in CM 1:4 on fair faces or other than fair faces of brick work or concrete surfaces, man holes firnished een and smooth without using extra cement with water proofing treatment. | 500 | Sqm | 101 ₹50,500 | 219 ₹1,09,500 | 5 ₹2,500 Lowest | 150 ₹75,000 | 150 ₹75,000 | 90 ₹45,000 | 100 ₹50,000 | 99 ₹49,500 |
| 3.00 | M&L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces of walls,man holes firnished fair & even . | 600 | Sqm | 105 ₹63,000 | 219 ₹1,31,400 | 102 ₹61,200 | 150 ₹90,000 | 150 ₹90,000 | 90 ₹54,000 Lowest | 100 ₹60,000 | 99 ₹59,400 |
| 4.00 | M&L for preparation of newly plastered surfaces of walls and providing and applying putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified as directed by Engr-in-charge. | 500 | Sqm | 69 ₹34,500 | 60 ₹30,000 | 54 ₹27,000 | 45 ₹22,500 | 90 ₹45,000 | 40 ₹20,000 Lowest | 100 ₹50,000 | 49 ₹24,500 |
| 5.00 | S&F in repair 2mm thick fibre glass reinforced translucent plain sheeting with side lap fixed with srew. | 600 | Sqm | 579 ₹3,47,400 | 950 ₹5,70,000 | 450 ₹2,70,000 | 450 ₹2,70,000 | 350 ₹2,10,000 | 500 ₹3,00,000 | 400 ₹2,40,000 | 299 ₹1,79,400 Lowest |
| 6.00 | M&L for cement concrete 1:3:6 type C-2 using 40mm graded aggregates for bedding layers laid (SN8) 180(OD)/163(ID) mm internal dia DWCPE pipes after they are laid and tested complete all as specified (thickness of concrete bed 100 mm). | 900 | RM | 69 ₹62,100 | 399 ₹3,59,100 | 90 ₹81,000 | 350 ₹3,15,000 | 30 ₹27,000 Lowest | 70 ₹63,000 | 80 ₹72,000 | 199 ₹1,79,100 |
| 7.00 | S&F DWCPE(SN8) 180(OD)/163(ID) mm dia pipes and Snap fit/ Push fit coupler with rubber ring/ gasket for joining incl testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified. | 900 | RM | 479 ₹4,31,100 | 660 ₹5,94,000 | 540 ₹4,86,000 | 350 ₹3,15,000 | 495 ₹4,45,500 | 210 ₹1,89,000 Lowest | 350 ₹3,15,000 | 599 ₹5,39,100 |
| 8.00 | M&L for cement concrete 1:3:6 type C-2 using 40mm graded aggregates for bedding layers laid DWCPE(SN8) 200(OD)/175(ID) pipes after they are laid and tested complete all as specified (thickness of concrete bed 150mm). | 600 | RM | 69 ₹41,400 | 499 ₹2,99,400 | 580 ₹3,48,000 | 399 ₹2,39,400 | 30 ₹18,000 Lowest | 80 ₹48,000 | 100 ₹60,000 | 199 ₹1,19,400 |
| 9.00 | S&F DWCPE(SN8) 200(OD)/175(ID) mm dia pipes and Snap fit/ Push fit coupler with rubber ring/ gasket for joining incl testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified. | 600 | RM | 479 ₹2,87,400 | 699 ₹4,19,400 | 560 ₹3,36,000 | 425 ₹2,55,000 | 595 ₹3,57,000 | 330 ₹1,98,000 Lowest | 450 ₹2,70,000 | 799 ₹4,79,400 |
| 10.00 | M&L PCC 1 : 4 : 8 type D2 using 40mm graded stone aggregates as in foundation of manholes, posts etc complete all as specified. | 2 | CUM | 1,999 ₹3,998 | 1,900 ₹3,800 | 2,250 ₹4,500 | 2,000 ₹4,000 | 2,000 ₹4,000 | 1,400 ₹2,800 Lowest | 4,500 ₹9,000 | 2,499 ₹4,998 |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
6 Jan 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL MANISH E WASNIK
GE (CENTRAL) DELHI CANTT-10
GE/Token-87/2025-26
2025_MES_743680_1
8825/TOKEN-87/2025-26
Open Tender
Civil Works
Piece-work
180 days
GE (CENTRAL) DELHI CANTT-10
AS PER NIT
9 documents required · 9 mandatory
₹500
Yes
GE (CENTRAL) DELHI CANTT-10
₹1 L
Yes
18 Feb 2026
9 Dec 2025
8 Jan 2026
9 Dec 2025
6 Jan 2026
23 Dec 2025
Taking down cement plaster, terrazzo dado in any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish,vegitation outside complex (MOD land), complete all as specified.
M&L for rendering 15mm thick in CM 1:4 on fair faces or other than fair faces of brick work or concrete surfaces, man holes firnished een and smooth without using extra cement with water proofing treatment.
M&L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces of walls,man holes firnished fair & even .
M&L for preparation of newly plastered surfaces of walls and providing and applying putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified as directed by Engr-in-charge.
S&F in repair 2mm thick fibre glass reinforced translucent plain sheeting with side lap fixed with srew.
M&L for cement concrete 1:3:6 type C-2 using 40mm graded aggregates for bedding layers laid (SN8) 180(OD)/163(ID) mm internal dia DWCPE pipes after they are laid and tested complete all as specified (thickness of concrete bed 100 mm).
S&F DWCPE(SN8) 180(OD)/163(ID) mm dia pipes and Snap fit/ Push fit coupler with rubber ring/ gasket for joining incl testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified.
M&L for cement concrete 1:3:6 type C-2 using 40mm graded aggregates for bedding layers laid DWCPE(SN8) 200(OD)/175(ID) pipes after they are laid and tested complete all as specified (thickness of concrete bed 150mm).
S&F DWCPE(SN8) 200(OD)/175(ID) mm dia pipes and Snap fit/ Push fit coupler with rubber ring/ gasket for joining incl testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified.
M&L Mild steel Round/TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips with including necessary formwork etc completed.
Demolition and breaking up drain pipes of 200mm dia at any depth(Salt glazed ware, AC or Reinforced concrete, DWCPE) set in cement mortar
Demolition and breaking up drain pipes of 150mm dia at any depth(Salt glazed ware, AC or Reinforced concrete, DWCPE) set in cement mortar
S&F in repair Salt Glazed Stone Ware (SGSW) gully traps square or round mouthed type size 150x150mm including excavation/earth work, bed concrete, surrounding concrete and CI grating, complete all as specified.
Supply and fix in replacement of broken cast iron (sand cast) soil, waste and vent pipes in any length, with or without ears, with cement joints, laid in trenches bore of pipe 100mm complete all as specified and directed.
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete.
M&L for machine pressed precast concrete interlocking paver block with gray cement and no pigment, any shape and size confirming to IS- 15658 -2006 of 60mm thickness, M-40 Gde,Over and including 20mm thick layer of sand complete all as specified and directed.
M&L for 100mm thick PCC (1:4:8) Ty D2 as in sub base over rammed earth.
M&L for 50mm thick PCC 1:3:6 type C2 using 20mm graded stone agg as in sub base complete all as specified..
M&L for 22 to 25mm chequered ultra tiles over 15 mm thick screed bed in cm 1:6 and jointed and pointed in white cement mixed with pigment to match the shade of tiles of flooring all as directed.
S & F in replacement for precast fibre reinforced cement concrete Manhole cover (Ist quality) including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 1000mmx500mmx80mm omplete all as specified and as directed.
S & F in replacement for precast plastic fibre reinforced cement concrete Manhole covers with frame medium duty of overall size 450mmx900mmx50mm factory made all as specified and directed by Engineer-in-Charge.
Dismantling fencing wire mesh, any type
S&F mild steel as in hand rail, balusters, noising to steps, post and struts in fencing including cutting tops to shape as directed, driliing holes, notching for wire, drilling, bolting or riveting etc, conforming to Fe-290, Gde-E-165 including two coats of synthetic enamel paint over a coat of red oxide primer compete all as specified and as directed by Engineer-in-charge.
Supply only 3.15 mm dia galvanised steel chain link fencing, 50x50 mm mesh, made up to into mattrsses or cages, lapped, wired a all as specified.
Fixing only chain link fencing including line wires any mesh, size and type to any to any type of standard, rail, straining bolts, etc provn of winding wire all as specified.
M&L Mild steel Round 10mm dia conforming to FE-410-W (Gde-E-250) qualility A or FE-290 (Gde E-165) for use in chain link fencing as wind tie all as specified.
Schedule of Credit
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.34 MB
BOQ_832734.xls
BOQ • 0.30 MB
tenderpage.pdf
Tender Documents • 0.97 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .