PROVISION OF CUBICAL PARTITIONS FOR SETTING UP CASU BRICK PARTITION WALL JOINERY FLOOR TILING FIRE FIGHTING SYSTEM AND ALLIED WORKS IN NEW TRADE CENTRE NO 2 AT PARADIP

Amount

SCH 'A' PART-I (B/R PORTION) S&F partition work using powder coated aluminium frame of size 63.5mmx38.1mmx3.18mm thick for 3 to 4 Nos horizontal rows and vertical panel not exceding 0.90 mtr centre to centre, Make: jindal/equivalent , with board of 9mm prelam HDHMR board of panel should not exc 0.81 Sqm each fixed with aluminium clip complete all as specified and directed. Make :Jindal/ Action Tesa. (Note : Glass shall be measured & paid seperately)

S&F glass partition with 8mm toughened glass fixed with aluminium cleats for aluminum framing complete all as specified and directed. Make: Saintgobin/equivalent

S&F door using powder coated aluminium top and bottom frame of size 83.5x44.45mmx3 mm thick frame of size 100x44.45mmx2mm thick and side frame 47.62x44.50mmx3mm thick, incl Aluminium handle with locking arrangement complete as required Make: Jindal/equivalent , with board of 9mm prelam HDHMR board including SS hinges complete all as specified and directed. Make : Action Tesa. (Note : Glass shall be measured & paid separately)

S&F door closer hydraulically regulated designation No 3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L 100mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate complete all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

Taking down cement plaster/terrazo toping of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of brick work surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:6) on other than fair faces of brick wall surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for PCC type B1 (1:2:4) using 20 mm graded stone aggregate as in Precast cement concrete(reinforced) in cover slabs (for manholes etc.) and set in cement mortar 1:6 complete all as specified and directed.

M&L for TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips quality conforming to Fe 410-W-(Gde-E-250) quality 'A' (or) Fe-290 (Gde-E-165) complete all as specified and directed.

S&F Mild steel, plain, black sheet 1.60 mm thick in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified complete all as specified and directed. (Note- Glass shall be measured and paid separately) Make:Jindal/equivelent

S&F of Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W(Gde E- 250) quality A complete all as specified and directed.

M&L for preparation of new steel surfaces of any description exe 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

S&F powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. (Thickness or powder coating not less than 50 micron). complete all as specified and directed. (Note- Glass shall be measured and paid separately) Make:Jindal/equivelent

S&F aluminum powder coated anodized grill DG 202 of 10 mm dia rod square , rectangular, circular or similar type of shape, aperture not exc 7 cm in length or width fixed with `H’ or `F’ channel 38 mm x 12 mm x 1.30 mm (Sec No 8778) complete all as specified and directed. Make Grill No 20 of DECOREL or similar make as mentioned in PS.

S&F 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty/beads in square exc 0.5 sq. m in eachpane fixed to aluminum framing complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 100mm size aluminum handles, cast type anodised complete all as specified and directed.

S&F 75mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

Supply and fixing 75mm size Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

Dismantling floor, hearth or wall tiling ,dados of any description and size including cement mortar bedding (but not backing), removing serviceable tiles and staked properly to made on credit and remaining rubbish off the premises complete all as specified and directed.

M&L Vitrified Ceramic tiles 10 mm thick dark shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

S&F GI tubes,15 mm bore 'medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repair 15mm bore pillar taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and directed.

S&F in repair PVC connection 15mm size PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair vitreous China wash basin white, flat back,size 550X400 mm including cutting for pinning in ends of brackets, complete all as specified and directed. (Make:-HINDWARE)

S&F in repair 40 mm bore dia of discharge pipe waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms) inc grating with hole cp 125mm complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc complete all as specified and directed.

Cutting holes in brick walls exc halft brick but n.exc one brick in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required double charged complete all as specified and directed.

SCH 'A' PART-II (E/M PORTION) S&F of CMRI Certified LED Flameproof 1x16/20W LED Tube Light Fixture with Recommended for Gas/Vapor Group of IIA & II B and Zone 1& IP 65 Protection.etc. complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make Crompton/Sudhir/Shyam Switch Gear

S & F of Switch flame proof rotarytype with termination box inLM6, 16A, single pole 250V complete all as specified and directed. Make: Crompton/Sudhir /Shyam Switch Gear

Material and Labour for point wiring complete with multi-stranded copper conductor 1.5 sqmm size PVC insulated unsheathed cable 1100 Volt grade, conforming IS 694 & colour code in conduit system of wiring, drawn in including medium grade in stove enamelled Steel conduit not less than 20 mm dia concealed, including cutting chases and making good disturbed surface complete, sunk in pressed steel terminal boxes of required size of not less than 1.6 mm thick factory made and factory painted with top cover 3mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified and directed.

Material and Labour for sub main wiring complete with 2 x 6 Sqmm single core multi stranded copper conductor PVC FRLS) insulated unsheathed cable drawn in and including medium grade in stove enamelled Steel conduit ISI Marked not less than 25 mm dia concealed, on surface,including single core multi stranded copper conductor PVC (FRLS) insulated unsheathed cable 6.0sqmm size as earth wire drawn in same conduit complete including making good distributed surface of wall,complete all as specified and directed.

Supply and Fix Flame Proof Control Panel Box of size 500mm x 185mm Inner depth 150mm main Incomer 63 AMP Double Pole MCB-1 Nos, Out going 16 Amp DP MCB-06 Nos with Switch Socket Combine 16 AMP 230 Volt 3 PIN-2 Nos complete all as specified and directed. Make: Crompton/Sudhir/Shyam Switch Gear

Supply and fix Flame Proof Exhaust Fan Single Phase 230 Volta 450 mm Sweep complete all as specified and directed Make: Crompton/Sudhir/Shyam Switch Gear

Material and Labour for point wiring complete with multi-stranded copper conductor 1.5 sqmm size PVC insulated unsheathed cable 1100 Volt grade, conforming IS 694 & colour code in conduit system of wiring, drawn in including medium grade PVC conduit not less than 20 mm dia concealed, including cutting chases and making good disturbed surface complete, including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified and directed.

One light point controlled by one way switch.

One 3 pin socket outlet, 5/6 amps, on independent board.

All as per item No 41.01 here-in-before but with copper conductor 2.5 sqmm for One 3 pin socket outlet, 15 amps on independent board all as specified and directed.

S&F Modular switch 1 way 6A, 1 module complete all as specified and directed.

S&F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Modular switch 1 way 16A, 1 module complete all as specified and directed.

Supply and fix ceiling rose, surface bakelite,65 x 50mm, three terminals complete all as specified and directed.

S&F Modular White Cover Plate with Frame, 3 Module complete all as specified and directed.

S&F Modular White Cover Plate with Frame, 4 Module complete all as specified and directed.

S&F Modular White Cover Plate with Frame, 6 Module complete all as specified and directed.

S&F Modular Metal Flush Box 3 module complete all as specified and directed.

S&F Modular Metal Flush Box 4 module complete all as specified and directed.

S&F Modular Metal Flush Box 6 module complete all as specified and directed.

Material and Labour for sub main wiring complete with 4 single core multi stranded copper conductor 6 sqmm (Nominal area) PVC insulated unsheathed cable drawn in and including medium grade PVC conduit ISI Marked not less than 25 mm dia concealed, including making good distrubed surface, of wall, including single core multi stranded copper conductor 6 sqmm size as earth wire drawn in same conduit complete all as specified and directed .

Supply & fix LED tube light Fitting Smart Bright extruded aluminium batten available in 4 ft run length with multiple lumen packages and suitable for surface, wall & conduit mounting with accessories complete all as specified and directed. Make Philips Cat Part No BN021LED40S-6500PSU GR (4 ft) Eqv Crompton/ Havells

S&F flush mounting factory made Ekinoxe SPN DBs Double door IP-43 protection, IK-09 with Metal door with neutral bar,Earth Bar and cables ties for cable menagement fully insulated bus bar 4 way, complete all as specified and directed. Make : Cat No 607711 make -Legrand or Equivallent Make of Siemens/Schneider.

S&F flush mounting factory made Ekinoxe SPN DBs Double door IP-43 protection, IK-09 with Metal door with neutral bar,Earth Bar and cables ties for cable menagement fully insulated bus bar 12 way, complete all as specified and directed. Make : Cat No 607711 make -Legrand or Equivallent Make of Siemens/Schneider.

Supply and fix MCB single pole and neutral, 240 volts, 32 to 40 amps breaking capacity 10KA, ‘C’ Series. etc , complete all as specified and directed. Make : Legrand /Siemens/Schneider

Supply and fix MCB single pole 240 volts, 6 to 32 amps, 50HZ, 10 KA. , ‘C’ series complete all as specified and directed. Make : Legrand or eqvt in Siemens/Scheinder

Supply and fixing MCB TPN 63 Amps 415V 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to earth lead wire of GI wire 4mm dia by means of nuts/bolts and washers, check nuts and washer of galvanized iron or steel including 15 mm dia GI pipe light grade upto 1.5 mtr below ground level for protection pipe ,excavation and earth work charcole dust, common salt PCC 1:3:6 type C-I using 20 mm stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type BI using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handle 12 mm dia, round ,PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate no 3 of SSR Part I of 2009 and connected to earth test point incl testing complete all as specified and directed. Note :- Cost of earthing strip & GI pipe 25mm up to 7.5 m shall be included in cost of above item.

Supply and fix Sheet Metal Enclosure Triple pole and earth encolsure with a three pin and earth plug with socket complete with one 63 Amps triple pole MCB complete with and including complete all as specified and directed.

Supply and fix heavy duty exhaust fan of 450 MM sweep,Turbo Force SP (Heavy duty ) single phase 230/240 Volts,, AC supply, 1400 RPM complete and making holes with louvered shutters including mounting frame and connecting the fan to celing rose including provision of three core flexible copper conductor cable of size 1.5 Sqmm copper including to inside out surface & white wash etc with not less than 0.5m long to connection complete all as specified and directed. Make-Havells/Usha/Khaitan/ Orient

Supply and fix factory made V TPN DBs for MCCB Incomer, IP-43 protection with metal double door with suitable Size copper busbar with 2 neutral busbar, earth bar cables ties for cable management fully insulated busbar with set of wires and door earthing for provision of 100 Amps MCCB as incomer and included with SP/TP MCB's as outgoing 8 way 100 A MCCB+24 etc complete all as specified and directed Make-Schneider Cat part NoA9HVD08L suitable for 100 Amps MCCB as incomer & 24 Nos SP Out going /Siemens/Schneider.

Supply and fixing MCCBs 100 Amps capacity, 415 volts, 4 pole, 25 KA, thermal magnetic complete all as specified and directed Make Legrand/Siemens/Schneider

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Material and Labour for sub main wiring complete with 2 single core multi stranded copper conductor 6 sqmm (Nominal area) PVC insulated unsheathed cable drawn in and including medium grade PVC conduit ISI Marked not less than 25 mm dia concealed, including making good distrubed surface, of wall, including single core multi stranded copper conductor 6 sqmm size as earth wire drawn in same conduit complete all as specified and directed .

Supply and fix Sheet Metal Enclosure Triple pole and earth encolsure with a three pin and earth plug with socket complete with one 32 Amps triple pole MCB complete with and including complete all as specified and directed.

Supply, installation, testing and commissioning of Fir Extinguisher Ceiling mounted Clean Agent HCFC 123 Capacity 10 KG automatic fire extinguishers, fire extinguishing operated automatically, spraying with maximum force when temperature rise, capacity of cylinder 10 Kgs , It shall have high efficiency by extinguishing A, B , C and electrically started type of fires, discharge time minimum 10 Secs, auto discharge mechanism on temprature rise, Gross weight 14.8 Kg , can Height 320 mm, Diameter 300 mm complete all as specified and directed. Make : Make:-Cease Fire

Rekha Enterprises

DS ENTERPRISES

J B NATH AND SON

SWAIN ENGINEARING

M/S ABHISHEK JENA

ELECTRO COMMERCIAL CO

M/S T.N.CONSTRUCTION