Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.7 LAccepted-AOC | L1 | Accepted-AOC Being lowest tender | |
| 2 | L2₹33.9 L+₹3.8 L (12.7%)Rejected-Finance | L2 | Rejected-Finance Not being lowest tender | |
| 3 | L3₹34.4 L+₹4.4 L (14.5%)Rejected-Finance HOUSE NO 03 RAGHAVPURAM MALL ROAD MORAR GWALIOR | GWALIOR | GWALIOR | MADHYA PRADESH | L3 | Rejected-Finance Not being lowest tender |
Tender Value
₹35.1 L
EMD Value
₹70,200
Closing Date
20 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF TA
GE AF TA GWALIOR-474020
PROVN OF CERTAIN SANCTIONED WORKS AT VARIOUS LOCATION IN TECH AREA AT AF STN GWALIOR
2022_MES_570866_1
8900/1434/GWL/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF TA GWALIOR
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE AF TA GWALIOR
₹70,200
Yes
23 Feb 2023
23 Dec 2022
28 Jan 2023
23 Dec 2022
20 Jan 2023
6 Jan 2023
23 Dec 2022 - 5 Jan 2023
Amount
S&F in repair Powder coated aluminium frame for door, window, ventilators and partitions with extruded built up standard tubular sections with necessary jointing aluminium cleats using C.P./ stainless steel screws, and fixed to wall with fastner including and seal the gap between the frame and wall with sealent complete all as specified and directed by Engr-in-Charge.
M&L for 32mm thick DGU soundproof toughned glass consisting of (10mm th outer tinted glass, and 10mm th inner plain) with aluminium spacer 12mm wide filled with dissicant (Molecular sieves), sealed with sealent to Aluminium frames for fixing at ATC Tower etc at height 15 to 20mtr including taking down old glass from Aluminium framework complete all as specified and directed by Engr-in-Charge. Note: Shade/Tint as per user requirment and as approoved by GE.
M&L for Toughned soundproof DGU (double glass unit) overall 20mm thick (5mm th outer tinted glass and 5 mm th inner trasparent glass) with aluminium spacer 10 mm wide filled with dissicant (Molecular sieves) sealed with sealent to Aluminium frames for fixing at ATC Tower and Runway controller hut etc at any height including taking down old glass from aluminium frames complete all as specified and directed by Engr-in-Charge. Note: Shade/Tint as per user requirment and as approoved by GE
S&F Solar control film 25 micron sticked to glass panes as per instructions of manufacturers including removing existing solar control film and ceaning the glass complete all as specified and directed. Note : Shade/Tint as per user requirment and as approoved by GE
Taking down chowkats with shutters (without taking off shutters from the frames) of any description n.exc 1.5 Sqm each complete all as specified & directed
S&F UPVC luxury casement sound proof Sliding windows with frame and toughned DGU (Double glass unit) 20mm thick, DG INS, TGH (5T+10+5T) internal plain and external tinted with cylinder of one side key, one side thumb turn and locking system including necessary builders hardware etc complete all as directed. Make : FENESTA /KOMMERLING/RAJSHRI
S&F UPVC sound proof door shutter with frame with double toughned glass glazing 20mm thick , DG INS, TGH (5T+10+5T) with cylinder of one side key, one side thumb turn and locking system including necessary builders hardware etc complete all as directed. Make : FENESTA/ KOMMERLING/ RAJSHRI
S&F Roof trusses (framed), trussed, rafter, purlins, rails and fastenings with bracket framing ( tee, angle, channel or flat sections) including distance pieces, cleats etc. for Shed at ATC Tower balcony (Height 15mtr to 20mtr) complete all as specified and directed. Note: Rates shall inclusive of all necessary scaffolding to execute the work at ATC Tower balcony and applicable for all connected item of works.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. Note: Rates shall inclusive of all necessary scaffolding to execute the work at ATC Tower balcony and applicable for all connected item of works.
S&F Steel work in tubular trusses/tubular post (Squared /Rectangular/ Circular) including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.
S&F mild steel bolt (machine) made with hexagonal or square head at one end and screwed end to be fitted washer hexagonal or square not exceeding 5cm long complete all as specified and directed.
S&F Plates (plain or chequered) channels, cut or notched (ordinary and counter sunk) forming holes, welded/bolted to steet frame/truss using Fe-410W Gde 250 quality A steel all as specified and directed.
M&L for Hand rails, half round or other steel section or wind ties for roof including securing bolts complete all as specified and directed.
M&L preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer over 10m width or girth complete all as specified and directed.
M&L preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer n. exc 10m width or girth complete all as specified and directed.
Cutting holes in brick walls / RCC column and inserting holdfasts and making good dismantled portion in cement concrete 1:2:4 Type B-1 and plaster in CM 1:3 incl necessary distempering /Cement based paint to match with the adjacent surface as specified and directed by Engr-in Charge .
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.
M&L for plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate as infoundation filling and mass concrete complete all as specified and directed.
Demolition of cement concrete ( unreinforced) including floor tile ground floors and pavings n. exc 15 cm thick below or above G.L and dispose off the demolished material out of defence land complete all as specified and directed .
Demolition of cement concrete ( reinforced) of any description and in any position not otherwise specifically provided and dispose off the demolished material out of defence land complete all as specifeid and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.
M&L for RCC M-25 (Design mix) type B1 (using 20 mm crushed stone aggtI as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed
M&L for RCC M-25 (design mix) type B1 (using 20 mm crushed stone aggtI as in Columns, pillars, piers, posts and struts complete all as specified and directed
M&L for RCC design mix M25, 1:2:4 type B1 (using 20 mm crushed stone aggt) as in walls, Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter
Formwork to sides of pillars, posts, struts, piers, columns and stanchions
Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter.
Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
Mild steel bars 6 to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
Mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
M&L for 5mm thick rendering on fare faces of concrete surfaces in CM 1:4 finished even and smooth without using extra cement
M&L for Preparation of concrete newly plastered surface and applying two coats of cement base paint over acoat of primer complete all as specified and directed.
M&L for framed work of angles or tees with web and flanges cut to shape , drilled and counter sunk for screw , including bending and welding angles as necessary, gusset plates, riveting , etc such as security wall fencing post, grill etc confirming to Fe-290 Gde-E-165 complete all as specified and directed.
S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long, 16-20mm Diameter of neck complete.
S&F concertina coil 600 mm dia hot dip galvanized steel wire coated with LLR anticorrosive paint making diamond shape, fixed in fencing work all as specified and directed Note- One coil of concertina to stretched to 8 mtr only. (Angle Iron, barbed wire etc. shall be measured and paid separately)
S & F galvanized 2 stranded steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and fixing to any type of standard hooks, including securing and tying at crossing with and provision of galvanized mild steel wire staples or steel pins etc complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 M mean radius built in CM (1:6) complete all as specified and directed.
M&L for PCC (1:2:4) type B-0, (using 12.5 mm graded stone aggregate) as in copinga and fixing steel railing including necessary form work complete all as specified and directed.
Material & Labour for providing and fixing stainless steel (ISI Marked Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of wall, floor or the side of waist slab with suitable arrangement.
M&L for glazed ceramic coloured external tiles in vertical surface 350x 250x 7mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering on brick work or concrete surface in cement moratar 1:4 complete all as specified and directed.
M&L for 60mm thick factory made cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc, over and including 50mm thick compacted bed of fine sand/stone dust compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. Make: ISI Marked as Approved by GE.
M&L for factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.
M&L for stone slab 20-35mm thick designer jafri any shade for fixing in designer post jointing and pointing with neat cement slurry with pigment and silicon/araldite complete all as specified and directed. Note:- Colour of stone and design as approved by GE.
M&L for stone Post/pillar designer cross section 100mm x100mm and 600 to 900mm high with grove for jafri wall complete all as specified and directed.
M&L for 25 to 30mm thick Dholpur stone laid over cill /cladding to wall, gang saw cut, machine cut edges, uniform colour face work, table rounded , straight edge, laid and jointed in neat cement and stone dust mortar 1:3, pointed with and admixture of white cement and over 15mm thick plaster of each stone size exceeding 0.5 sqm area fixed with and including silicon treatment complete all as specified and directed
Demolition of Concrete in ground floors / hard standing with manual/ mechinical means incl cutting edges of concrete with cutter exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of reinforced cement concrete (Roofs, floors (other than ground floors), beams, chajjas and similar suspended work)
M&L for 15mm thick rendering on fair faces of brick/stone masonry walls in CM 1:4 finished even and smooth without using extra cement all as specified and directed.
M&L for Preparation of newly plastered surface and applying two coat of weather coat exterior emulsion white or tinted over a coat of primer as approved complete all as specified and directed.
M&L for 15mm thick rendering other than fare face of brick/stone masonry walls in CM 1:6 finished even and smooth without using extra cement all as specified and directed.
M&L for Preparation of newly plaster surface of wall and applying two coat of distemper oil emulsion over a coat of chalk whitening (preparatory to distempering) white or tinted as approved all as specified and directed.
M&L for RCC M-25 (Design mix) type B1 (20 mm aggt) plinth Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed
M&L formwork to sides and soffits of beam, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams, etc of flat concrete surfaces fair finished complete all as specified and directed
M&L PCC 1:2:4 type B1 ( using 20mm graded stone aggregates) as in roof kerbs, benching, haunching, levelling course , floors finishes , copoing etc incl necessary form work finished even and smooth without using extra cement complete all as specified and directed.
Spreading and levelling of earth obtained from excavation and filling under floor in layers n exc. 25cm thick and well ramming including watering as required
M&L for 75 mm thick plain cement concrete (1:3:6) type C2, using 40 mm graded stone aggregate as in Plinth protection and finishing the surface even & smooth without using extra cement complete all as specified and directed.
M&L for Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface
M&L 100mm thick cement concrete 1:4:8 Type D2 ( using 40mm graded stone aggregates) as in sub base complete all as specified and directed.
M&L for 40 mm thick PCC (1:2:4) type B0 (20 mm graded stone agg) as in floor finishes, finished even and smooth with using extra cement complete all as specified and directed.
S&F Glass dividing strips, 3 mm thick and 38mm wide inserted in position, conform to design
M&L for 3 mm thick PVC tiles/ sheets, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors complete all as specified and directed Make: As approved by GE.
M&L for glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering on brick work or concrete surface in cement moratar 1:4 complete all as specified and directed.
S&F MS steel sections as Roof, trussed, purlins, rafters, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, wind tie, holdfast cleats etc
S&F 50mm outer dia CPVC pipes SDR 13.5 & Plain CPVC SDR 13.5 fittings in as in Roof truss , rafter, purlins, rails as in desired shape and design fastenings and including distance pieces, etc Make: Supreme, Prince, Astral, Finolex
S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw/ J hooks with bitumen washers in roof, wall etc
M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep for inserting Galvalume sheet and making good to shaping horizontal face of groove with cement concrete 1:2:4 type B-1 (using 12.5mm graded Stone Aggts).
S&F 4mm thick HPSC pre-prime non asbestos fibre cement building board (E-classic ) decorative finish including pre powder coated GI frame with suspension system (Grid) of size 600x600mm fixed over and including comprising of T section 25mmx32.5mmx 1.6mm size as main runners and wall angle to placed along the wall at desired level of the False ceiling 4mm dia GI suspender of suitable size distance complete all as directed. all as specified and directed by Engr-in-Charge.
S&F Stainless steel curtain rod standard size 2mm thickness fixed to wall fixed with rawal plug and zinc screws complete all as specified and directed.
S&F Stainless steel decorative choice end SS bracket and globe for fixing with curtain rods complete all as specified and directed.
S&F Powder coated aluminium frame for door, window, ventilators and partitions with extruded built up standard tubular sections with necessary jointing aluminium cleats using C.P./ stainless steel screws, all as specified and directed by Engr-in-Charge.
S&F Powder coated aluminium door shutters with extruded built up standard tubular sections using aluminium sec not less than 2.00 mm thick, (shutter with styles 85mmX44.45mm, top rails 83.5mmX44.45mm , intermediate rail 83.5mmx44.45mm, bottom rail 114.3mmx44.5mm) with aluminium beading and rubber neoprene paking for fixing glass, each shutter comprising of aluminium powder coared builder hardware( like 03 Nos hinges, 02 Nos 200mm Handle, 01 Nos 16mm dia 300mm long sliding door bolt and 01 Nos 150mm tower bolt) using C.P./ stainless steel screws, all as specified and directed by Engr-in-Charge.
S&F Powder coated aluminium sliding windows shutters with extruded built up standard tubular sections (using aluminium sec not less than 1.5mm thick), with aluminium beading and rubber neoprene paking for fixing glass and, 02 Nos sliding rollers at bottom, PVC locking arrangement to each shutter using C.P./ stainless steel screws, all as specified and directed by Engr-in-Charge.
M&L for 40 mm thick PCC (1:2:4) type B-1 (20mm graded stone aggt) as in flooring complete all as specified and directed.
M&L 40 mm thick damp proof course in cement concrete 1:2:4, type B-0 (using 12.5 mm stone aggregate) to horizontal or vertical surfaces including necessary formwork.
M&L for hardcore of broken stone or boulders gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface.
M&L for brick work with sub class 'B' bricks , straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed
M&L for rendering 15 mm thick on fair faces of brick or concrete surfaces in cement mortor (1:6) and surface finished even and fair complete all as specified and directed.
M&L for three coats of white wash on newly plastered or concrete surface including preparation complete all as specified and directed.
M&L for M-25 (design mix) type B1 (using 20 mm graded stone aggregate) as in lintel Beams & Roof Beams.
M&L for M-25 (design mix) type B1 (using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; INCLUDING EDGES OF CONCRETE FLATS not exceeding 200mm thick (Horizontal or sloping)
M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified
M&L for 5mm thick rendering fare face of brick/stone/CONCRETE surfaces as in ceiling in CM 1:3 finished even and smooth without using extra cement all as specified and directed.
M&L for 1.25 MM THICK Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;errected in position including hold fast, PCC 1:2:4 Type BO USING 12.5MM graded aggregate complete drilling as indicated,complete: push pull or gear operated type, complete all as specified and directed.
Dismantling mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F 5mm thick tinted glass fixed with necessary rubber gasket and aluminium snap beadings tint match with existing complete all as specified and directed.
M & L for 100mm thick Cement concrete type D2 for 1:4:8(40mm graded stone aggregate) as in foundation/sub base of floor surfaces all as specified and directed.
M&L cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in surface channels and drains etc complete .
Extra for forming fair finish to drains or channels 30 cm inner girth in cement concrete using extra cement, including forms, moulds, mitred/stopped ends etc.
M&L, cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in bed block/coping including necessary formwork (straight or curved) weathered slightly rounded or chamfered angles and throating as directed.
M&L for rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates using FE 410 W (Gde-E-250 quality A) etc INCLUDING CUTTING/CHIESLING HOLES IN BRICK/Concrete wall upto 115mm depth and filling the same with PCC (1:2:4) type B-1 using 20 mm graded stone aggregate With complete all as specified and as directed.
M&L for PCC (1:3:6) type C1, using 20mm graded stone aggregate as in foundation filling mass concrete complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
Demollition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed
M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone including cutting and polishing types over 15 mm thick in CM(1:6) etc complete.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete.
M&L for brick work with sub class 'B' bricks , straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed
M&L for rendering 15 mm thick on fair faces of brick or concrete surfaces in cement mortor (1:6) and surface finished even and fair complete all as specified and directed.
M&L for three coats of white wash on newly plastered or concrete surface including preparation complete all as specified and directed.
S&F 15 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete.
S&F 20 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete.
S & F 500 litre capacity of rotational moulded polyethylene water storage tank multilayered (minimum triple layer) construction, ISI marked of make specified (cylindrical vertical with closed top) hoisted and fixed in position including S & F 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified in SSR Part-I complete all as specified and as directed.
S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.
Supply only 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm etc complete.
M&L for Cutting cheses, pinning in, making good to facing where required & pointing in CM 1:3 for conc water tubing and like not exc 10CM girth in brick wall etc complete.
S&F in repair 15 mm bore bib taps long body chromium plated fancy type, cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe or for unions and fixed 15 mm bore etc complete.
M&L for 15mm thick rendering fare face of brick/stone masonry walls in CM 1:4 finished even and smooth without using extra cement including taking down cement plaster on brick surface or stone including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.
S&F in repair cast iron body, door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.
S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring over all length of cover plate 150mm complete all as specified and directed.
M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
Supply only powder coated aluminium snap beading as approved by GE
Supply only rubber gasket for packing of glass panes as approved by GE
S&F for 200 mm long aluminium alloy, anodised, sliding door bolt with hasp, staples(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or csat aluminium alloy complete all as directed and specified
Taking down and refixing of exisiting STEEL gate any type and any size etc complete all as directed and specified
Supplying ,Laying, jointing and testing XLPE insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes :-. Make :- Havells/Plaza/Poly cab (a) 25 Sqmm 3.5 core
(b) 35 Sqmm, 3.5 Core
(c) 70 Sqmm, 3.5 Core
Supply and spreading clean, dry, fine river sand for UG electric cable in two layers (8 cm thick before laying the cable & 15 cm thick after laying cable) total 23 cm thick including gentle punning the sand upto 18 cm (total thickness) and consolidated around cable for protection of under ground cable complete all as specified and directed. Note :- Only punned thickness shall be measured for payment).
Supply & Laying precast PCC cable concrete cable cover LV low voltage type -I flat ISI marked of size 250 mm x 150 mm x 40 mm complete all as specified and directed by Engr-in-charge. Make :- Mahatab/Ravi/Duracoat
Supply, install, commissioning and testing of split type wall mounted Air conditioner of capacity 2 TR (6000 K Cal/hr) single phase, (Non CFC/HCHC) suitable for 230 Volt + 10% , 50 Hz, AC supply complete with cordless remote control unit , minimum 5 star rating complete comprising of following :- Make:-Voltas/Carrier/Daikin/Hi-techi/Blue Star (a) Indoor unit copper coil with three speed blower fan of appropriate capacity including PCB, thermostatic control, air filter and drain for condensing water. (b) Out door unit comprising of compressor with motor, air cooled copper condenser with fan and motor and unit shall be installed out side the building/ on roof. (c) Refrigerant copper pipe for suction and discharge line with insulation , condensing water drain pipe & protected by suitable size of flexible PVC conduit with control valves & safety accessories including control wiring for evaporator & condensing unit with suitable size of copper cable. (d) Making good the disturbed surface to match the existing surface after plugging the hole etc. (e) PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in plinth suitable for installation of outdoor unit or powder coated MS bracket fixed on wallas per Manufacture's instruction with necessary grouting MS hold fast, bolts, washers duly painted and making good to disturbed surfaces suitable for installing outdoor unit of 2 TR AC complete all as specified and directed. (f) Electrical cable required to connect out door unit and indoor unit to voltage stablizer inclusive in above rate.
Supply and fixing factory made epoxy powder coated distribution board VTP & N 4 ways (TPN MCCB DB) with metal double door (IP-54 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one TP-MCCB 160Amps as incomer and 12 SP MCBs or 4 TP MCBs (or any combination of SP/TP MCBs ) outgoings complete all as specified and directed. Make :- Legrand/Havells/C&S
Supply and fixing voltage stablizer electronic type for automatic operation, single phase naturally air cooled, indoor type, wall mounted for input variation between 170 V to 250 V with output voltage stablized at 230 V with accuracy of + 2.5% and of capacity 5.0 KVA suitable for 2TR AC
Supply and fixing flame proof, weather proof industrial plug socket, combined in LM-6 for 2 pole + earth SPN and earth plug 250V, 20 Amps with steel enclosure and one MCB SP 20/32 amps complete all as specified and directed.
M & L for sub main wiring with two runs of single core 6 Sq.mm for phase conductor and one run of single core 6 Sq.mm as earth continuity conductor of multi stranded copper conductor FR-LSH PVC insulated unsheathed cable conforming to IS : 694 drawn through in & including steel conduit on wall/roof surface as per relevent IS standard not less than 25 mm width and all as complete specified and directed. Note: Two run of main wire one run, one run of earth wire and one run PVC caping/casing shall be measure as one unit.
M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross sectional area, single core, pvc insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No in and including medium grade, PVC Concealed conduit of dia not less than 20mm and conduit accessories concealed in wall, ISI marked with valid CML No (IS-9537-1983 for conduits and IS: 3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes (with earth duly) duly painted with two coats of anticorrosive paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3mm thick hylam laminated sheet cover for fixing of switches, sockets etc including PVC insulated multi stranded copper conductor 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dully complete all as specified and directed at site for the following :
(a) One light/ Fan/Exhaust fan/Wall mounted fan point controlled by one way switch.
(b ) One 5 Amps switch socket combination on independent board.
All as per item No 130 here in above but 2.5 Sqmm stranded copper conductor and independent board for 15 Amps switch/ socket point as directed.
S&F switch piano flush type single pole one way 6 Amps,1 module complete all as specifed and directed.
S&F moduler switch socket 6 Amps -2/3 pin combined 2 module, complete all aspsecified and directed.
S&F Modular Switch socket 6/ 16 Amps 2/3 Pin combined 2 module complete all as specified and directed.
S&F modular fan regulator Step type 120W 2module complete all as specified and directed.
S&F lamp holder insulated body with back plate for battern fittings complete all as specified and directed by Engr-in-charge
Supply & Fixing LED Batten fittings 20 Watt complete with lamp & round block etc, incl PVC gutties and flexible wire and connecting to ceiling rose complete . Model Wipro Garnet 20W , D532065 of Wipro or Equivalent in make of Philips/Bajaj
Supply and fixing MCCB, 4 pole, 160A, 25KA(Adjunstable thermal magnetic type) complete all as specified and directed.
JNK BOND
M/s. Ravi and brothers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .