Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.7 LAccepted-AOC CHENNAI | CHENNAI | TAMIL NADU | 600001 | L1 | Accepted-AOC Being L1 Bidder | |
| 2 | L2₹39.9 L+₹10.5 L (35.7%)Rejected-AOC C 234 ADG P CHENNAI | L2 | Rejected-AOC Being Not L1 Bidder | |
| 3 | L3₹31.0 L+₹1.6 L (5.34%)Rejected-AOC 20 1 CHANDRA NIVAS APPLEBY ROAD WELLINGTON COONOOR NILGIRIS 643 232 | COONOOR | NILGIRIS | TAMIL NADU | 643232 | L3 | Rejected-AOC Being Not L1 Bidder | |
| 4 | L4₹31.7 L+₹2.3 L (7.75%)Rejected-AOC 30 H SELBOURNE ROAD NEAR S M HOSPITAL UDHAGAMANDALAM THE NILGIRIS TAMIL NADU 643 001 | UDHAGAMANDALAM | THE NILGIRIS | TAMIL NADU | 643001 | L4 | Rejected-AOC Being Not L1 Bidder | |
| 5 | L5₹33.2 L+₹3.8 L (13.1%)Rejected-AOC C 101 ADG P CHENNAI | L5 | Rejected-AOC Being Not L1 Bidder |
Tender Value
₹32.3 L
EMD Value
₹64,600
Closing Date
20 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Ashwani Mittal EE GE DSSC
GE DSSC WELLINGTON BARRACKS-POST, WELLINGTON, THE NILGIRIS, TAMIL NADU,PIN-643231
ADDNALTN TO BLDG NO II C AT DSSC WELLINGTON
2023_MES_587021_1
8320/E8
Open Tender
Civil Works
Item Rate
120 days
WELLINGTON
PLEASAE REFER TENDER DCOUMENTS AND NITS
8 documents required · 8 mandatory
₹500
GE DSSC WELLINGTON
₹64,600
Yes
28 Apr 2023
25 Mar 2023
22 Apr 2023
25 Mar 2023
20 Apr 2023
8 Apr 2023
Amount
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar all as specified and directed.
Taking down Chowkhats or frames n.exc. 1.5 sqm including shutters (without taking of the shutters from the frame) all as specified and directed.
Taking down Chowkhats or frames exc1.5 sqm including shutters (without taking of the shutters from the frame) all as specified and directed.
Excavating over areas, n exc 1.5 m deep and getting out Soft / Loose soil all as specified and directed.
Excavating over areas, exc 1.5 m deep and getting out Soft / loose soil all as specified and directed.
M&L for plain Cement concrete Type D2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete all as specified and directed.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified and directed.
M&L for RCC M-25 Design Mix for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and directed.
M&L for RCC M-25 Design Mix for Columns, pillars, piers, posts and struts all as specified and directed.
M&L for RCC M-25 Design Mix for Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed.
S&F TMT bars Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
S&F TMT bars Mild steel bars 6mm to 8mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
M&L Formwork to sides of pillars, posts, struts, piers, columns and stanchions all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.all as specified and directed.
M&L for Precast cement concrete type C1 -1:3:6 (Using 20 mm graded aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc all as specified and as directed.
M&L for rendering 15 mm thick on fair faces of brick work in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 15 mm thick on fair faces of brick work/stone wall in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.
M&L for UPVC door white colour all as per manufacturer's direction and following specifications all as directed :- 1.The profile for construction of UPVC Door will be of overall size 60x58 mm with wall thickness 2.7 + or - 0.2 mm extruded sections. 2.The corners will be plastic welded. 3.The hinge side vertical outer frame shall be reinforced with galvanized channel of wall thickness 1.2 mm. 4. The door will be fixed to walls using 8 mm dia 80 mm dia MS screws minimum 3 nos on each side. 5.The top portion of door shall be provided with glazing of 5 mm thick One way see through glass fixed to door shutter with UPVC standard beadings of 24.5 x 16 mm of 2 mm thick. 6.The bottom portion of door for 1 m height will be provided with UPVC hollow board not less than 6 mm thick. 7.The door shall be provided with :- (a) Mortise lock of brass size minimum 100mm four lever with two keys as per manufacture's specification. (b) Two nos of fan light pivot size 170mm on one shutter. (c) 03 nos of 3D hinges on each shutter. 8.All the fittings shall be provided with using self tapping screws. Note for item No 21&22: The entire fixing will be done as per manufactures instructions and specification and as directed by Engg in charge.
M&L for UPVC Windows/Ventilators with glazing, white colour all as per manufacturer's direction and following specifications :- (1) M&L for UPVC Window frame shall be made of PVC material confirming to IS 10151.the door frame shall be made of extruded UPVC section having overall dimension of 48 × 40 to 42 ×50 mm having wall thickness 2 mm ± 0.2 mm . Corners of wall frame shall be shall be joined by MS galvanized brackets. Joints mitred and plastic welded . the hinge side vertical outer frame shall be reinforced with galvanized MS tube of wall thickness 1 mm ± 0.1 mm and the tie rod shall be provide at the bottom of the frame. (2) the profiles should be single chamber system which shall provide high insulation properties. (3) The window system should be glazed with 5 mm thick One way see through glass fixed in window frame as per manufacture instruction. Make for Item No 21 &22: M/s Sarvesh Multi Plast India Pvt Ltd. / Madhu industries / AMD overseas Ltd / Gadli industries/ASTRAPIA UPVC Tech pvt Ltd.
S & F looking mirror of size 600mm x 450mm using 5 mm thick bevelled edge mirror of sellected quality glass fixed with clips all as specified fixed to wall with suitable glass screws all as directed.
M&L for 18/19 mm thick plywood fixed on wall for mirror all as per manufacturers instructions and as directed. Make/Design : Florz, Sapphire, Terrazzo or equivalent all as specified and directed.
M & L for Granite stone slab flooring 16-18 mm thick any colour/shade machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, rounding edges as required, laid over and including15mm thick rendering in CM (1:6) to be fixed flooring, door, windows cladding/ openings and kitchen platform complete all as specified and as directed.
M&L for steel work in tubular post, trusses including special shaped washer etc..complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade E-250 all as specified.
S&F Rolled mild steel works such as in main and cross beams, hip and jack rafters, purlins, angle cleats or other connecting plates, as in rain water gutter clamps etc. conforming to Fe-410-W(Gde E-250) quality-A all as specified and directed.
M&L for Preparation of new/previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed.
M&L For pre-painted Galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 mpa as in covering/cladding to wall fixed with self tapping screws all as specified and directed.
M&L For pre-painted Galvalume aluminium Zinc coating GI based Plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 mpa as in covering/cladding to wall fixed with self tapping screws all as specified and directed.
S & F PVC half rounded gutter dia 250 mm (CL-2) (6 kg/cmsq) all as specified and as directed.
S & F PVC bends of 250 mm (CL-2) (6 kg/cmsq) of any radius all as specified and as directed.
Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) any thickness, including cover fillets and suspension grid complete all as specified and directed.
M&L for gypsum board false ceiling 12mm thick fixed with standard GI frame work with GI furring channels of 16 gauge, main "U" shaped channels @ 1220mm C/c and inter connected cross channels "C" shape spaced at 610mm c/c,the main furring channels shall be fixed through GI cannels suspenders from thero of @1200c/c, Main and inter connected channels shall be fixed through fasteners clips as per manufacturer's instructions, shall be applied with two coats of plastic emulsion paint over a coat of primer all as specified and directed.
M&L for Moorum/red bajri/approved earth filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, leveled and rammed including watering all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level).all as specified and directed.
M&L Plain 100 mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) in flooring all as specified and directed.
M&L 40 mm thick plain Cement concrete type B-1, 1:2:4 (20mm graded aggregate) in flooring all as specified and directed.
M&L Vitrified Ceramic tiles light shade Double charged 10 mm thick (square/ rectangular) olished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4 complete all as directed and specified
All as per item No. 39 above but on vertical surfaces over and including 10 mm thick rendering in CM 1 :4 complete all as specified and directed.
M&L for Plain fillets 2nd class hardwood exc 6 sqcm but n.exc 13 sqcm. square, rectangular or triangular in section, clean sawn, secured with rawl plug (plugging to wall). all as specified and directed.
M & L for 8mm thick Pre-Engineered laminated wood for wall paneling planks of any colour and design (as approved by GE) fixed over and including to 8/9mm thick plywood fixed on wall or floor all as per manufacturers instructions and as directed. Make : Florz, Sapphire, Terrazzo or equivalent
M & L for Preparing new plastered surfaces of walls and applying two coat of Asian paint Royale Shyne paint (coloured/white) over a coat a deco prime primer with brush/roller finished even and smooth and 2-3 mm thick of wall care putty all as directed and as specified.
M & L for complete removable of existing treatment from old plastered surfaces of walls and applying two coat of Asian paint Royale Shyne paint (coloured/white) over a coat a deco prime primer with brush/roller finished even and smooth and one coat of putty all as directed and as specified.
M & L for Preparing new plastered surfaces of walls and applying two coat of external weather coat over a coat a deco prime primer with brush/roller finished even and smooth all as directed and as specified.
M & L for complete removal of existing treatment from old plastered surfaces of walls and applying two coat of external weather coat over a coat a deco prime primer with brush/roller finished even and smooth all as directed and as specified.
M&L for 75 mm thick Cement concrete type C2 1:3:6 (using 40 mm graded aggregate) in plinth protection, footpaths etc finish even and fair without using extra cement complete all as specified and directed.
S&F Factory made machine pressed Chequered cement concrete coloured tiles of size 30 cm X 30 cm X22 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors , over 15 mm thick screed bed in CM 1 :4 complete all as specified and as directed.
M&L 20 mm thick Eco-soft / Rubber mat tiles of size 600mm x 600mm weighing 4.5 kg / tile in size laid in flooring existing surface laid and pasted with suitable glue pigment to match the shade of the complete all as specified and directed by Engineer in charge (Make : Endura / Eqlt)
S&F 12 mm Thick Toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required all as specified and directed.
S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed.
S&F 600 mm Length stainless steel door handle all as specified and directed.
S & F 18mm thick High Density High Moisture Resistant (HDHMR) Board, both side laminated of approved colour as in shutters, back board, vertical support and horizontal shelves of kitchen/bedroom cupboards fixed with screw to timber framed work etc all as specified and directed. Note: Rate includes for All exposed edges/surfaces to be finished with same laminated sheet edge tap to match with the other surfaces
S & F 12mm thick High Density High Moisture Resistant (HDHMR) Board, both side laminated of approved colour as in shutters, back board, vertical support and horizontal shelves of kitchen/bedroom cupboards fixed with screw to timber framed work etc all as specified and directed. Note: Rate includes for All exposed edges/surfaces to be finished with same laminated sheet edge tap to match with the other surfaces
S & F stainless steel soft close hinge with 35mm cup dia, full overlay, 110 degree opening suitable for 18mm thick shutters complete all as specified and as directed. MAKE: EBCO/ GODREJ / KAFF / HETTICH
S & F Gun metal handle of size 150mm for kitchen/bedroom cupboards fixed with screws complete all as specified and directed. MAKE: EBCO/ GODREJ / KAFF / HETTICH
S & F Magnetic closer of suitable size for kitchen/bedroom cupboards fixed with screws complete all as specified and directed. MAKE: EBCO/ GODREJ / KAFF / HETTICH
S & F stainless steel telescopic ball bearing channel, zinc plated finish for drawer including necessary fittings up to length of 600mm fixed with screws complete all as specified and directed. MAKE: EBCO/ GODREJ / KAFF / HETTICH
S & F stainless steel kitchen baskets (SS-304) of size 544mm x 505mm x 200mm complete all as specified and as directed. MAKE : EBCO, Cat No : RA-BCCS1-21-20-8 or equivalent in HETTICH/ KAFF/ GODREJ
S & F stainless steel kitchen baskets (SS-304) of size 544mm x 505mm x 100mm complete all as specified and as directed. MAKE : EBCO, Cat No : RA-BCCS1-21-20-4-CT or equivalent in HETTICH/ KAFF/ GODREJ
S & F stainless steel kitchen baskets (SS-304) of size 530mm x 505mm x 150mm complete all as specified and as directed. MAKE : EBCO, Cat No : RA-21-20-6-PL or equivalent in HETTICH/ KAFF/ GODREJ
M&L for UPVC Fixed ventilators/partition with glazing all as per manufacturer's direction and following specifications :- (1) M&L for UPVC ventilator frame shall be made of PVC material confirming to IS 10151.the Ventilator frame shall be made of extruded UPVC section having overall dimension of 60 ×60 mm having wall thickness 2.5 mm ± 0.2 mm . Corners of wall frame shall be shall be joined by MS galvanized brackets. Joints mitred and plastic welded . the hinge side vertical outer frame shall be reinforced with galvanized MS tube of wall thickness 1 mm ± 0.1 mm and the tie rod shall be provide at the bottom of the frame. (2) Glazing shall be provide with 8mm thick frosted glass fixed with appropriate size beading as per manufactures specifications. Make : M/s Sarvesh Multi Plast India Pvt Ltd. / Madhu industries / AMD overseas Ltd / Gadli industries.
Labour only for etching of emblem of size 300x300 or size as directed by GE.
Demolition of cement concrete (unreinforced) in roof slab/ first floor and pavings not exc 15cm thickness (below or above ground level).all as specified and directed.
M &L for 30 mm thick Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded aggregate) as in roof padding / leveling course kerbs, or chamfered on edges finished even and smooth with using extra cement and mixed with water proofing compound all as specified and directed.
M & L for 5mm thick Screed bed or bedding layer of cement mortar 1:3 when the padding concrete is green for floor finishes and mixed with water proofing compound complete all as specified and directed. ( Water proofing compound shall be measured and paid separately )
M&L for 3 mm thick APP modified waterproofing membranes ,weighting not less than 3.6 kg/sqm reinforced with known woven polyester matt black finished weighting not less than 160g/sqm having softening point not less than 150 degree celcious longitudinal tensile strength not less than 300 N/5cm , 10 cm overlap and 15 cm for end laps , overcoat of bitumen primer @ of 0.30 kg/sqm and finishing with bituminous aluminium paint applied @ 0.10 kg / sqm and finished all as per manufactures instruction and as directed. Note:-The work shall be carried out by authorised applicator of manufacturer.
Supply only liquid waterproofing compound all as specified and directed.
Taking down old, unsv aluminium/copper point wiring (light, fan, socket or power) complete, incl fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-Charge.
Disconnecting/dismantling of old existing un serviceable DB's any type/way 240/415 Volts with their old/un serviceable burnt MCCB/MCB's etc. complete all as specified and directed by Engr-in-Charge.
NOTE for Item Nos 69 to 70 : Cost of making good the disturbed surfaces is deemed to be included in the unit quote rates.
M & L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed for the following : Make of cable : Havells/Polycab/Finolex.Make of conduit-Precision/Modi/Finolex (a) One Light/fan/Call Bell etc. point controlled by one switch 5/6 Amps.
(b) One switch socket outlet point 5/6 Amps on independent board.
Description all as per Item No-72 above but with FRLS PVC insulated copper conductor cable of size 4.00 Sqmm and 4.00 Sqmm for earth continuity conductor green in colour for 16A switch socket complete.
NOTE for Item Nos 72 & 74 ) Modular metal flush boxes shall be measured & paid separately. 2) Cutting chases & making good the disturbed surfaces is deemed to be included in the unit quoted rates.
M & L for concealed sub-main wiring alongwith earth wire of size (2 x 4.00) sq. mm + (1 x 4.00) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex, Make of conduit-Precision/Modi/Finolex.NOTE for item No 6&7 : 1) Two runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. 2) Modular metal flush boxes (if req) shall be measured & paid separately.2) Cutting chases & making good, including necessary Putty work of the disturbed surfaces is deemed to be included in the unit quoted rates.
S & F Modular switch, one way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXXW061, Make - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
S & F Modular switch, one way, 16 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXXW161, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
S & F Modular shuttered socket outlet 3 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKSWW063, Make - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
S & F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKCWW163, Make - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 1/2 modules all as directed. Cat No : ACTXMIIX01/02, Make - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 3 modules all as directed. Cat No : ACTXMIIX03, Make - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 8 modules all as directed. Cat No : ACTXMIIX08, Make - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
Supply & Fixing modular cover plate suitable for fixing switches/sockets of 1/2 modules all as directed. Cat No : ACVPPCWV01/02, Make - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
Supply & Fixing modular cover plate suitable for fixing switches/sockets of 3 modules all as directed. Cat No : ACVPPCWV03, Make - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor
Supply & Fixing modular cover plate suitable for fixing switches/sockets of 8 modules all as directed. Cat No : ACVPPCWV08, Make - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor
NOTE for Item Nos 76 to 86 The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets.
S&F ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite three terminal complete all as specified and directed. Make: Havells/CG/Anchor
S&F Surface and wall mounted LED batten 10 watts 2 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed incl taking down old/unsv fittings. Make : Havells, Cat No:ENDURALINEARNEOBS10WLED865SPCWHor techno-commercially equiv In Jaguar/Philips
S&F Surface and wall mounted LED batten 20 watts 4 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed incl taking down old/unsv fittings. Make :Havells, Cat No:ENDURALINEARNEOBS20WLED865SPCWH or techno-commercially equiv In Jaguar/Philips
S&F ultra modern, recess mounting,40W,5700K LED luminaire of size 2' x 2' suitable for ceiling complete with electronic driver & high brightness LED of Make: Luker cat No: LPS40 or techno-commercially equiv in Jaguar/Philips all as directed by the Engr- in- charge.
S&F ultra modern, recess mounting,15W,5700K LED luminaire circular shape suitable for ceiling complete with electronic driver & high brightness LED of Make: Luker cat No: LNPR15 or techno-commercially equiv in Jaguar/Philips all as directed by the Engr- in- charge.
S&F decorative wall mounting fixture luminaire with PC diffuser suitable for lamps with E-27 with all accessories internally prewired and including connecting up complete all as specified and as directed. Make: Luker, Cat No:LWLA2E27 AG or techno-commercially equivalent in Philips/Jaguar
Supply and fixing in repairs LED lamps 9W,3000K with E-27 base cap all as directed by the Engr-in- Charge Cat No: LHLDDDECBD2R009 of Make : Havells or techno-commercially equiv In Jaguar/Philips/Luker
Supply and fix energy saving high power LED building security light of 30W made up of pressure die cast aluminum housing with embedded PC cover having TOP Opening seperate driver compartment with IP66 protection including 40mm dia bracket bended into 120 degree angle and making connections in flexible conduit all as directed. Make: Cat no ENDURASUNDOWNSL30WLED757PASYBOPC Endura Sun Down of Havells or techno-commercially equiv In Jaguar/Philips
Imp Note for Item Nos 89 to 95) Design/Drawing/Technical catalogue/specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge/GE for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned before placing order to the Manufacturer/Supplier. 2) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates.
Supply, install, testing & commissioning of Exhaust fan, PVC body with connected accessories 250 mm sweep, single phase, 240 Volts, AC, 50 Hz, noise level less than 45 dB and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Ventil Air DX or techno-commercially equivalent in Usha/Crompton. Note :- (i) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates
S&F single pole and neutral enclosure with a two pin and earth plug and socket complete suitable for fixing one single pole MCB 20A C Series with Breaking capacity 10KA all as directed.Make: L&T, Cat No : DBMPS120SD or techno-commercially equiv in Legrand/ABB
S&F MCB, SP, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA. Make-L&T, Cat No-AU10S10(06-32)3C or techno-commercially equivalent in LEGRAND/SIEMENS.
S & F MCB, DB, TPN, 06 ways, DOUBLE DOOR, IP-43, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete including blanking plates as required and fixed flush to wall/other surface complete all as specified and as directed. Make : L & T, Cat No : DBTPN006DD or techno-commercially equivalent in Siemens/Legrand.
S & F MCB, TP, 10KA, 415V, "C" curve, 63 A, ISI marked complete all as specified and as directed. Make : L & T, Cat No :AU10S30633C or techno-commercially equivalent in Siemens/Legrand.
S & F MCB, TPN, 10KA, 415V, "C" curve, 63 A, ISI marked complete all as specified and as directed. Make : L & T, Cat No : AU10S40633C or techno-commercially equivalent in Siemens/Legrand.
M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25mtrs deep below ground level) with top edge of plate not less than 1.5mtrs below normal ground level, connected to GI strip of size 32X6 by means of bolts,nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point on completion with and including 40mm bore medium grade GI protection pipe (upto 7.5mtr long) for earth and 20mm GI medium grade for watering including PCC chamber pit & cover with suitable lifting hooks, with funnel, wire mesh, common salt, charcoal filling, necessary excavation and earth work in any type of soil complete all as specified including taking out the existing u/s earthing accessories. Note: On testing after completion, if the desired earth resistance is not obtained the earthing shall be redone at no extra cost till the entire satisfaction of Engr-in-Charge. . Make of GI Pipe : TATA/Jindal/Prakash
Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings etc. Cable Under ground, Armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 4 Core 25 Sqmm incl connecting with suitable glands, lugs etc all as specified and directed by the Engr-in-Charge. Make: Havells/Finolex/Polycab
Excavation in trenches not exc 1.5 m wide and not exc 1.5m depth for errecting of poles, Laying of cables and getting out in hard/dense soil complete all as specified.
Returning, filling in, including spreading levelling, watering and well ramming in layers not exc 25 cm in depth in hard/dense soil complete all as specified and as directed by Engr-in Charge.
Removing excavated material to a distance not exc 50 m and depositing where directed at a level not exc 1.5m above the starting point all as directed.
Supply and laying sub class 'B' bricks of size 230 x 115 x 75 mm laid across the cable for cable protection, above sand complete all as specified and directed.
Supply and laying Medium grade GI Pipe (ISI Marked) of 40mm dia for cable protection to be fixed on wall/in trenches with necessary clamps or in road crossing,complete all as directed(Rate qouted shall include MS clamps of required size wherever pipes are to be fixed on walls/other surfaces). Make:Tata/Jindal/Prakash
M & L for cutting the existing hard standing /PCC /WBM road at a depth not less than 45 cm and 25 cm in width for passing of cable through GI pipe, returning filling in, complete including finishing the surfaces by providing top not less than 25 cm thick cement concrete type C-1 (1:3:6) using 20 mm grade aggregate, bottom filled with excavated earth and finishing to a uniform smooth surface complete all as specified and directed.
Supply, spreading and compacting of Riddled sand in trenches for cable cushion on both top and bottom of cable, including ramming complete all as specified and as directed by Engr-in Charge
S&F indoor hanging light LED, decorative type including provision of cable 3 core of size 0.75 Sqmm complete all as specified and directed. Make : Cat No LHI204E27 of Luker or techno commercially equivalent in Jaquar, Cat No. JNL-BRS-SLPEA020BE27.
GMS Builders
P K ENTERPRISES
KGP BUILDERS
ACE PROMOTERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .