REPAIR REPLACEMENT IMPROVEMENT OF LT SUPPLY DISTRIBUTION SYSTEM, SERVICING OF DG SETS, STREET LIGHT, SECURITY LIGHTS AND CONNECTED WORKS AT AF STN ARJANGARH UNDER AGE AF AYANAGAR UNDER GE AF GURGAON

Amount

Disconnecting and taking down of Geysers (water heater) of capacity 25/ 50 Ltrs horizontal/vertical of any make/model from existing position and dismantling of parts i.e.bottom plate, Top cover, water assembly thernmostat, heating elements, inner tank ,glass wool,Pressure release, inlet and outlet valves etc.complete and reassembling and refixing in same position after descaling desludging and cleaning with suitable cleaning agent and materials and washing with fresh water and repair and replacment of defective/unserviceable components complete all as spaciifed and directed. Note: The rate quoted shall include the minors repairs and replacment of minor parts i.e. screw nuts, bolts washers and patch worketc .However the major components incoperated herein after shall be paid under respective items.

S&F in repair of required qty thermowool/PUF insulation as existing for Geysers of 50 Ltrs capacity complete all as specified and as directed.

All as per item No 2.00 here-in-before, 25 ltrs capacity

S&F in repair of water syphon assembly with rubber gaskit suitable for 50 Ltrs Geysers all as per exisiting shape and size complete all as specified and directed

All as per item No 4.00 here-in-before, 25 ltrs capacity

S&F in replacement of inner copper container not less than 1.6mm thick for 50 Ltrs Geysers complete all as specified and directed.

All as per item No 6.00 here-in-before, 25 ltrs capacity

M&L for replacement of outer cover duly spray painted as per existing to geyser of 50 Ltr capacity .

All as per item No 8.00 here-in-before, 25 ltrs capacity

S&F in replacement of indicators red/green colour as per existing size and type .

S&F in replacement of heating element triangle/cup type of 2 KW, 240 V , 50 HZ,suitable size and shape with Washer as per existing duly ISI marked to geysers of any make and of capacity 25/50 Litres of traingular base. Make;Daspass/Venus/Pearl/CG/Bajaj

All as per item No 11.00 here-in-before, but horizontal type

S&F in replacement of PVC connection suitable for use in hot water / cold water with brass connector duly threaded internally on both ends of size 18”(45 cm) long complete .Make : Prayag/Polytuf

All as per item No 13.00 here-in-before, but 60cm long

S&F in replacement of thermostat any type and model suitable to the existing one range 0 to 100 C temperature for geysers of any make horizontal / vertical of capacity 25 Ltr to 50 Ltrs .Make: siemens/ Tonsons control/ Belima.

M&L in replacement of pressure release valve any type as existing suitable for geysers any make horizontal / vertical of capacity 25 to 50 Ltrs complete all as specified and as directed

M&L for Painting to Geyser 25 ltr any make horizonal /vertical with two coat of synthetic enamel white paint with spray gun or with brush after proprerly cleaning the surfaces all as specified and directed.

All as per item No 17.00 here-in-before, cap 50 ltrs

M &L for Grouting of bolts by making holes in wall of size upto 15 mmx100mm and fixing of Geyser of capacity 25 to 50 Ltrs on wall with nuts and washers all as directed

S&F in repair single pole and neutral enclosure with a two pin earth plug and socket with one single pole MCB of capacity 15/20 Amps all as directed

M&L in repair conection lead 1.5 mtr length 3 core PVC insulated and sheathed multistranded copper conductor of 2.5 Sqmm 1100 Volt grade along with metal clad top plug 15/20 Amps for geysers complete all as spacified and directed.Make-Kalinga/ Havells/Plaza

M & L of wiring in replacement with two single core FR PVC insulated unsheathed copper cable of size 2.5 sqmm, 1100 volts stranded conductor & drawing through rigid PVC non metallic conduit/surface conduit including cotinous earth wire PVC insulated unsheathed cable 1.5 sqmm copper multistandard conductor and connecting to earth dolly including taking down old /unserviceable wiring of any type and making good the disturbed surface Geysers all as directed Note - Three runs of cable shall be measured as one length. .

M & L for wiring in replacement with two single core FR PVC insulated unsheathed copper cable of size 4 sqmm, 1100volts stranded conductor & drawing through rigid PVC non metallic conduit/surface conduit including cotinous earth wire PVC insulated unsheathed cable 2.5 sqmm copper multistandard conductor and connecting earth dolly including taking down old /unserviceable wiring of any type and making good the disturbed surface for Air conditioner all as directed Note - Three runs of cable shall be measured as one length

S & F in repair GI tubing medium grade with all fitting confirming and duly I S I marked,fixed on wall / ceilings or laid in floor of 20 mm bore complete all as spd and directed

All as per item No 24.00 here-in-before, bor 15 mm

S & F in repair stop valve cast copper alloy screwed down , high presure with crutch or butterfly handle screwed both ends for iron pipe , fancy type chromium plated 20 mm Bore complete all as spacified and directed.

All as per item No 26.00 here-in-before, bor 15 mm

S&F in repair of MCB single pole 6 to 32Amps 240 V,10KA 'B' Series complete all as specified and as directed.

S & F in repair solar glass of solar panel of size (Flat type) 212cm x 108 cm x 8 mm for solar water heater of 100Ltrs capacity complete all as specified and as directed.

M & L for servicing and cleaning of solor water heater of 100 Ltrs capacity including descalling and cleaning of cold/ Hot water tanks, complete all as directed.

S & F in repair for insulation for hot water worn out insulation GI pipe of dia 15 mm of solar water heater system complete all as specified and as directed.

S&F in replacement of Heating Element 3.0 KW, 240V, 50Hz ISI mark suitable for dual power solar water heater 100Ltrs capacity, complete all as specified and as directed. Make;Venus/Pearl/CG/Bajaj

Taking down existing window type AC 1.5/2 ton from different location for servicing of AC including replacement of rubber mounting bush for compressor, bakelite connector, cleaning and washing of air filter, repair to defective electric connection with suitable size brass lugs, small nut/bolts screw, repairing defective connection copper wire etc and greasing of fan motor, checking of any leakage of gas/cooling coil/condensor/compressor units etc, painting of interior mettalic portion including removel of rust/dust and refixinng the same after satisfactory testing complete all as specified and as directed.

All as per item No 33.00 here-in-before, but 1.5/2 ton split type air conditioner

Supply and fixing running capacitor 45 MFD +5% suitable for split/window AC including taking out unserviceable capacitor all as specified and directed. Make Universal/Sarada

All as per item No 35.00 here-in-before, but 45 MFD with 4 Mfd fan capacitor.

All as per item No 35.00 here-in-before, but 45 MFD with 6 Mfd fan capacitor.

All as per item No 35.00 here-in-before, but 6 MFD capacitor.

All as per item No 35.00 here-in-before, but 4 MFD capacitor.

S & F in repair starting capacitor 80 /100 MFD Make : Usha/Capital/Epcos

S&F in repair AC thermostat switch , 230 V to match with the existing suitable for split/window AC including taking out unserviceable one all as specified and directed. Make Indfoss/Ranutrol

S&F in repair remote sensor circuit board for 1.5/2 ton to match with the existing suitable for split AC including taking out unserviceable one all as specified and directed.

S&F in repair magnetic controller assembly of existing model to suit for 1.5/2 ton for split/window AC including taking out unserviceable one all as specified and directed.

M&L for gas charging R-22 to required quantity to window type AC 1.5 / 2 Ton capacity of any make any model including flushing of gas,oil charging, checking of leakage and testing on full load complete all as specified and as directed.

M&L for refrigent gas charging R- 134A to required quantity to for refrigrator , deep freezer, and water cooler of any Capacity of any make any model including flushing of gas,oil charging, checking of leakage and testing on full load complete all as specified and as directed.

S&F in repair PVC air filter for 1.5/2 Ton window/split Ac (AS per existing) Make : LG or Equivalent.

S&F in repair Blower fan blade made of aluminium/PVC for 1.5/2 Ton window/split Ac (as per exisitng) Make : Cosmo/ OG

S&F in repair Contactor MR-1 Type for 1.5/2 Ton window/split Ac (as per exisitng) make : L&T

S&F in repair Front grill suitable size for 1.5/2 Ton window Make : Gem/Usha/Fedferlloyd/Carrier air cionditioner

S&F in repair wiring kit for Air conditioner 1.5 to 2 TON ton Make : Shri Ram/ Kirloskar

Starting relay box type suitable for window/split AC 1.5/2 Ton with over load complete all as specified and directed. Make:- Sriram/Hitech/Kirloskar.

S & F in repair copper tube 1/4" sizes suitable for /split AC 1.5/2 Ton complete all as specified and directed.

S & F in repair copper tube 1/2" sizes suitable for /split AC 1.5/2 Ton complete all as specified and directed.

S & F in repair copper tube 3/4" sizes suitable for /split AC 1.5/2 Ton complete all as specified and directed.

S&F in repair of capillery tube suitable for 1.5 ton AC window type complete all as specified and as directed

S & F in repair Insulation foam type for copper tube split AC 1.5/2 Ton) of existing sizes complete all as specified and directed.

S&F in repair of evaporator coil suitable for 1.5 ton AC window type complete all as specified and as directed

S&F in repair of evaporator coil suitable for 1.5/2 ton split AC complete all as specified and as directed

S&F in replair of condensor coil suitable for 1.5 ton AC window type complete all as specified and as directed

S&F in replacement of condensor coil suitable for 1.5/2 ton split AC complete all as specified and as directed

S&F in replacement of hermatically sealed compressor reciprocating type suitable for window/split AC 1.5 TR of any make including duly cutting the coper tubing , connecting /welding and brazing the copper tubes ,gas charging, foundation bushes, nuts bolts and testing after gas charging for normall functioning. Make : Shree Ram/Kirloskar/Copeland/Tecumseh. NOTE: The required quantity of gas shall be measured and paid under respective sechulde of item.

All as per item No 61.00 here-in-before, but suitable for 2 ton.

S&F in replacement rotory type compressor unit suitable for window/Split AC 1.5 TR of any make including duly cutting the coper tubing , connecting /welding and brazing the copper tubes ,gas charging and testing after gas charging for normal functioning. Make : Shree Ram/Kirloskar/Copeland/Tecumseh.

All as per item No 63.00 here-in-before, but suitable for 2 ton.

Supply and fix in repair time delay switch suitable for 1.5 to 2 TR window/Split AC Make: VENUS/ EICHER.

S&F in repair of replacement blower motor from the window AC of Capicity up to 1.5 /2TR including making necessary connection all as specified and directed.

S&F In replacement of defective / burnt blower motor from the split AC of Capicity up to 1.5/2 TR including making necessary connection all as specified and directed.

M&L for cutting and taking out rusted/damaged portion of bottom sheet of window/split AC of capacity 1.5/2 Ton and providing new sheet of existing gauge including welding/brazing as required with and including proper fixing of compressor's rubber bushes, nuts bolt and painting with two coat of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

Taking out and opening carefully the blower motor of conditioner 1.5/2 ton , rewinding with super enamelled copper winding wire of existing gauge including replacement of unserviceable bush / bearing, long nuts bolts etc with new one and reasembling complete all as specified and as directed.

M & L for servicing/repair of water cooler of capacity 40 to 150 ltrs, deep freezer/refrigerators upto 310 ltrs of any make in existing site with and including detecting gas leakage, repairing of defective/loose electric connection items/connected parts such as relay, capacitor, compressor grill, etc and cleaning condensor coil with nylon brush and washing with clean water and drying with air blower to ensure proper cleaning complete unit complete all as specified and directed. Note i) Any type of T&P item required shall be arrange by the contractor at no extracost. ii) Cost of new nuts, bolts, washers required at site will be deemed to be included in quoted rates. iii) Cost of spares/refrigerent shall be measured and paid separately under relevant items.

S& F in replacement of condensor fan motor suitable for water cooler capacity 40/80 ltrsas per existing make all as specified and directed.

S& F in replacement of condensor fan motor suitable for water cooler capacity 60/120 ltrsas per existing make all as specified and directed.

S&F in replacement of hermatically sealed compressor reciprocating type of Refrigerator of capacity up to 300/315 Ltr including duly cutting the coper tubing ,connecting /welding and brazing the copper tubes ,gas charging and testing after gas charging for normall functioning. Make : Shree Ram/Kirloskar/Copeland/Tecumseh.

All as per item No 74.00 here-in-before, but suitable for deep freezer 194/210 ltrs.

All as per item No 74.00 here-in-before, but suitable for water cooler 40/80 ltrs.

All as per item No 74.00 here-in-before, but suitable for water cooler 120/150 ltrs.

Supply and fixing running capacitor for water cooler/refrigerators/deep freezer as per existing make including taking out unserviceable capacitor all as specified and directed. Make Universal/Sarada

All as per item No 78.00 here-in-before, but starting capacitor.

S&F in repair AC thermostat switch , 230 V to match with the existing suitable for water cooler/refrigerator/deep freezer including taking out unserviceable one all as specified and directed. Make Indfoss/Ranutrol

Supply and fixing in repair of the following spare parts for repalcement of the unserviceable items for Refrigerator :-

S & F PTC relay OLP HE 48/115 Make : Whirlpool / Classic/ Godrej

S & F Overload protector for refrigerator 1/6 HP ( Make : Whirlpool / Classic/cubing)

S & F Over load protector for refrigerator 1/8 HP (Make : Whirlpool / Classic/cubing)

S & F Rubber door beeding gasket set suitable for 165 / 175 / 285 / 300 / 315 ltrs refrigerators

S & F Bulb for refrigerator , 15 Watt 220 volt, pin type Make : Bajaj / Omex/Philips

S & F Gas drier filter for refrigerator make : Apurna / Whirlpool

S & F Ice tray (PVC superior quality)

S & F Relay open type for refrigerator 1/6 HP (Make : Ranutrol / Classic)

S & F Relay open type for refrigerator 1/8 HP (Make : Ranutrol / Classic)

M&L for cutting and taking out rusted/damaged portion of bottom sheet of Water cooler/refrigerator/deep freezer of any capacity and providing new sheet of existing gauge including welding/brazing as required with and including proper fixing of compressor's rubber bushes, nuts bolt and painting with two coat of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

S & F in replacement float valve assembly brass 15 mm dia suitable for water cooler complete all as specified and as directed. Make : Prayag / Polytuf

S & F in replacement CP brass nipple 15 mm x 125 mm for water out let pipe complete all as specified and as directed

S & F in replacement Condensor coil suitable for water cooler 40/80 ltrs complete all as specified and as directed Make : Usha / Sidwal / Voltas

S & F in replacement chromium plated self closing push cock / lifting cock (water taps) suitable for 15 mm dia pipe complete all as directed Make : Prayag / Polytuf

Opening the desert coolers of any make and taking out unserviceable parts for repair / replacement including re-assembling the cooler after servicing and repair / replacement including wiring, capacitor, switches, regulators, including supply and fixing of u/s nuts bolts and washers etc and testing complete all as specifeid and as directed. Note:- Spare parts shall be measured and paid separately under respective items as supply only.

S&F in repairs desert cooler body complete with tank, side shutter, stiffner, grill of made up from 22 gauge PGI sheet including necessary holes & drain plug complete all as specifeid and directed.

Supply & Fixing in repair grass wool pad 10 mm thcik of existing size as directed for sides and back shutters of coolers complete all as specified and as directed.

S&F in repair submersible water lifting pumps of superior quality for 4 feet lift of any model and make of desert cooler complet all as specified and as directed. Make : Summer cool

S&Fin repair submersible water lifting pumps of superior quality for 6 feet lift of any model and make of desert cooler complet all as specified and as directed. Make : Summer cool

S&F in repair rewinding of desert cooler fan motor of with super enamelled copper wire as per existing size, 230 volts, 50 Hz single phase two speed including replacement bracket etc complete all as specified and as directed.

M&L for spray /brush painting to desert cooler body inner and outer surfaces including kit fan motor and pump with one coat of synthetic enamelled paint of approved shade / colour and two coats of black bituminous paint inside the tank complete including scrapping of existing paint and preparing surfaces and writing SM/MES No etc complte all as specified and as directed.

Supply and fixing in repair capacitor 4 MFD, 440 volts 50 Hz complte all as specified and as direected Make : Capital / Usha

S&F in repair front grill for desert cooler of any make any type made pvc of complete all as specified and as directed.

Supply & Fixing in reapir PVC flexible pipe 15 mm dia of superior quality fitted with water lifting motor complete all as specified and as directed

S&F in repair PVC flexible armoured pipe superior quality 15 mm dia (as per existing) complete all as specified and as directed

Supply and fix in repair side shutter for desert cooler made up of sheet steel including fitting them in to cooler by cutting sides as required of sizes 700 x 600 mm complete all as specified and as directed

Supply and fixing in replacement desert cooler having Fan of metal body, 450mm sweep, 1500 RPM, 240 Volts, single phase and submersible water pump of best quality for 2 m head, body of cooler fabricated out of GI sheet of not less than 1.20mm thick, including 5m, 3 core flexible cord with plug top 5/15 Amp, 3 pin, electric driven having nominal air flow capacity of 3000 Cum/hour complete all as specified and as directed.

Disconnecting/taking out the existing servo voltage transformer from site and transporting to civil workshop for servicing and repairs and refixing the same after repairing and replacement of defective items after drain out of transformer oil and commissioning at its original/new location after repair/replacement of capacity 15 to 30 KVA of servo 3 phase, 440 volts including painting of body with two coat of paint complete all as specified and directed. Note: The rate quoted shall include the minors repairs and replacment of minor parts i.e. screw nuts, bolts washers and patch work etc .Labour elements for fixing spares is to be inclusive .However the major components incoperated herein after shall be paid under following respective items.

Supply only control push button/toggle switches.

Rewinding of servo stabilizer coil as per original specification with super enamelled copper wire with necessary insulating materials all as specified and directed.

Supply only LT bushing with brass terminal, neoprene rubber gasket and washer etccomplete all as specified and directed.

Supply only transformer oil for topping up upto standard level with new oil as per IS having dielectric strength not less than 50 KV at 2.5 mm gap complete all as specified and directed.

Supply only servo control motor as per existing model for controlling voltage regulation complete all as specified and directed.

Supply only Cork/neoprene rubber gasket set as per existing model complete all as specified and directed.

Supply only PCB as per existing model for controlling voltage regulation complete all as specified and directed.

Supply & Fixing in repair voltmeter 0-500 V of existing size for servo stabilizer digital type complete all as specified and directed. Make : Digitron / IMP / MECO

S&F in repair indicator lamp (LED type) for voltage stabiliser complete all a specified and directed Make : L&T / Seimens

Supply & Fixing in repair digital voltmeter meter with PCB having parameter high, low ,mains, input, auto, manual and buck and booster of existing size for servo stabilizer digital type complete all as specified and directed. Make : Digitron / IMP / MECO

M&L for re-winding with super enamelled copper winding wire of existing gauge of main transformer of 160 volts to 240 volts or 135 volts to 270 volts AC single phase for voltage stabilizer of the following capacity:-

Maintenance and servicing to DG set including attending faults on call basis for normal repairs including replacement of defective and worn out filters, gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing of bearings of engine and alternator, checking of batteries, applying petroleum jelly to battery tereminals, adding distilled water checking the oil, coolent levels of capacity 62.5 to 125 KVA at Dhobi Ghat, Booster, MRS and STP complete all as specified and as directed. Notes:- (i) All items such as cleaning agent, Cotton Waste, grease, minor items such as washer, nuts, bolts etc are required for carrying out the normal maintenance of the engine will be included in the quoted rate. (ii) Fresh engine oil/spare parts for DG sets shall be supplied by the contractor as “ Supply only” and shall be measured and paid separately under item of this BoQ. (iii) During maintenance/servicing of DG set, complete DG set shall be checked properly and all setting shall be done properly in the quoted rate. (iv) The contractor shall done maintenance/servicing of DG set by authorized service agency only.

Ditto all as per item No 104 here-in-before but capacity 20 to 35 KVA at complete all as specified and as directed by

Supply only Diesel filter element with 'O' ring suitable for 62.5 to 125/100 KVA DG set compete all as specified and as directed. Make: Kirloskar

Supply only Spin- on filter element for luricanting oil with 'O' ring suitable for 62.5 to 125/100 KVA DG set compete all as specified and as directed. Make: Kirloskar

Supply only Fan Belt complete suitable for 125/100 KVA DG set compete all as specified and as directed. Make :- Fenner/ Dunlop.

Supply only Fan Belt complete suitable for 20 to 35 KVA DG set compete all as specified and as directed. Make :- Fenner/ Dunlop.

Supply only air filter element suitable for 62.5 to 125/100 KVA DG set compete all as specified and as directed. Make: Kirloskar

Supply only air filter element suitable for 20 to 35 KVA DG set compete all as specified and as directed. Make: Kirloskar

Supply only Spin- on filter element for luricanting oil with 'O' ring suitable for capacity 20 to 35 KVA DG set including removal of extg unserviceable one compete all as specified and as directed by Engr-in charge. Make: Kirloskar

Supply only Diesel filter element with 'O' ring suitable for capacity 20 to 35 KVA DG set including removal of extg unserviceable one compete all as specified and as directed by Engr-in charge. Make: Kirloskar

Supply only by pass filter element with 'O' ring suitable for 62.5 to 125 KVA DG set compete all as specified and as directed. Make: Kirloskar

Supply only by pass filter element with 'O' ring suitable for 20 to 35 KVA DG set compete all as specified and as directed. Make: Kirloskar

Supply only fan belt for battery charging alternator complete suitable for 62.5 to 125 KVA DG set compete all as specified and as directed. Make :- Fenner/ Dunlop.

Supply only fan belt for battery charging alternator complete suitable for 20 to 35 KVA DG set compete all as specified and as directed. Make :- Fenner/ Dunlop or equivalent

Supply only Rubber Hose pipe set for water circuit with clamps complete suitable for 62.5 to 125 KVA DG set compete all as specified and as directed or equivalent.

Supply only Rubber Hose pipe set for water circuit with clamps complete suitable for 20 to 35 KVA DG set compete all as specified and as directed or equivalent

Supply only Engine oil, multi grade premium Genuine oil 20W/ 40 as per manufacturer recommendations in DG sets complete all as specified and as directed. Make :- Indian oil/ Hindustan Petrolium/ Castrol/ BPCL or equivalent. Make: Kirloskar ( K-oil) /Cummins

Supply and applying Petrolium Jelly (01 Kg plastic sealed container) complete all as specified and as directed. Make :- Indian oil/ Hindustan Petrolium/ Castrol/ BPCL or equivalent

Supply and fill distilled water for topping up in lead acid batteries complete all as specified and as directed.

Supply and fill electrolyte of suitable specific gravity for lead acid batteries in sealed container complete all as specified and as directed.

Dismantling of worn out battery clamp and battery connecting wire made of copper 1.5 mtr long and replacement of battery clamp heavy duly 02 Nos in one side and 2 Nos lugs on other side of suitable sizes fixed complete all as specified as directed.

Material and labour for battery teriminal brass clamps including removal of extg unserviceable one compete all as specified and as directed by Engr-in charge.

Material and labour for oil pressure gauge including sensor and cable complete as per sample including removal of extg unserviceable one complete all as specified and as directed.

Material and labour for dismantling/ taking out and repair the radiator fitted in 62.5 to 125 KVA capacity of DG sets and strip opening complete radiator assembly,for servicing mechanically and proper cleaning of tubes with using de-scaling solution, including repair of water tubes and top/ bottom tanks by soldering / gas welding of leakage of tubes/tanks. including replacement of gasket, nut bolts,etc ensuring perfectly leak proof after servicing of radiator, re-assembling and fixing the same in position and testing the system complete all as specified and directed . Notes :- (i) The quoted rates of the contractor includes for fixing the serviceable parts in position and replacement of unserviceable parts with new parts. (ii) quoted rates are inclusive of replacement of small/minor parts such as nuts, bolts, washers, gaskets/ packing etc. (iii) The quoted rates of contractor are deemed to be included cost of transportation.

All as per item No.127 but for capacity of 20 to 35 KVA DG set

Material and labour for water temperature guage including sensor and cable complete as per sample including removal of extg unserviceable one complete all as specified and as directed.

Material and labour for taking out of unservicable self starter 12 volt and connected unserviceable portion of electric wiring and carring out repairs and overhauling of the self starter for 62.5 to 125 KVA installed engine and replacement of armature, carbon brush, bearing, bendix penion,solenoid switch, bearing, tapping of field coil refixing of all component and fixed in existing postion including testing complete all as directed.

Material and labour for fuel steel braided pipe with benjo bolts and washers etc of length 30 cm long including removal of extg unserviceable one compete all as specified and as directed by Engr-in charge.

Material and labour for fuel steel braided pipe with benjo bolts and washers etc of length 45 cm long including removal of extg unserviceable one compete all as specified and as directed by Engr-in charge.

Material and labour for canopy hinges for auqastic doors with suitable bolts and nuts of DG set including removal of extg unserviceable one compete all as specified and as directed by Engr-in charge.

Supply and fix for digital type frequency meter 96 x 96 mm flush /square pattern suitable for 25 KVA to 125 KVA capacity of DG Set including removal of extg unserviceable one compete all as specified and as directed by Engr-in charge. Make- L&T/AE or equivalent

S&F digital Ammeter of size 96 x 96 mm flush montring type of capacity 0-100 Amp all as directed Make : AE/L&T or equivalent

S&F digital Voltmeter of size 96 x 96 mm flush montring type of capacity 0-500 volts size all as directed Make : AE/L&T or equivalent

Supply and fix for Time delay relay suitable for 25 KVA DG set to 62.5 KVA DG set including removal of extg unserviceable one compete all as specified and as directed. Make:- Simens/ L&T/ ABB/ C & S or equivalent

Supply and fix for Time delay relay suitable for 110 KVA DG set to 125 KVA DG set including removal of extg unserviceable one compete all as specified and as directed. Make:- Simens/ L&T/ ABB/ C & S or equivalent

Material and labour for solenoid switch assembly 12/24 volts suitable for 25 KVA DG set to 125 KVA DG set including removal of extg unserviceable one complete all as specified and as directed.

Supply and fix in repair low maintenance lead acid of capacity 12 volts 180 AH with initial charging including removal of extg unserviceable one compete all as specified and as directed. Make:- Exide/ AMCO/ Amaron or equivalent

All as per item No.141 but for capacity of 12 Volts 150 AH

All as per item 141 but for capacity of 12 Volts 92 AH

Material and labour for control wiring of the DG set upto 125 KVA complete with provision of additional auto cables heavy duty suitable for generator set applications including removal of extg unserviceable one compete all as specified and as directed.

S&F onload change over switch with sheet metal enclosure of capacity 100 amps 4 pole. Make:- L&T/ Siemens/ Schneider.

All as per ser item No 145 above but of capacity 125 amps 4 pole. Make:- L&T/ Siemens/ Schneider.

Supply and fill genuine coolant in 5 ltrs plastic sealed container for topping up in Radiator of DG set located at different locations as directed by Engr-in-Charge complete all as specified and as directed.

Cleaning of diesel tank of various capacity DG set in / out side at location, complete with drain out DHPP and cleaning tank and refilling the DHPP testing complete all as directed.

Supply and fix Silencer spring pipe, silencer box for suitable for 25 KVA DG Set Model No: ESN 47.3001/0702003 at (KSP 444 ASC) all as specified and directed by Engr-in- Charge

Disconnecting and removing old u/s panel and fabrication, installing and commissioning starter panel cubical indoor type made out of 2 mm thick CRCA sheet for door, covers and sheet shrouds and partitions shall be minimum 1.6 mm dust and vermin proof, front opening with locking arrangement suitable to accommodate 03 Nos Star delta Starters( Motor 1, Motor 2 and 01 S/by) complete with relays, contactors,timers, set of CTs for metering and protections and energy analyser to indicate current, phase and line voltage, provision for overload, short circuit, restricted earth fault, under frequency , control cabling from starter panel to pump motor and elsewhere including cable gland, lugs etc , all complete and inter locking including the following :- (a) MCCB 4 pole, 35 KA , 200 A, with thermal magnetic setting -01 Nos (b) Aluminium colour coded/insulated bus bar 300 Amps capacity -04 Nos (c) MCCB 4 pole, 25 KA 63 A,with thermal magnetic setting -03 Nos (d) 3 Pole power contactor AC-3 suitable for 25 HP starter -09 Nos (e) Start/stop push button switch-6 (f) Thermal over and under voltage relays -06 (g) CTs of 200/5A -01 set of 3 (h) Auto phase sequence corrector of 200 Amp, 415 volts, 3 phase -01 Nos (j) Indicating lamps LED for load on mains and load on sets (k) MCBs for instruments (l) Onload changeover switch 200 A, 415volts, 3 phase open execution type-01 Nos (m) Star delta timer 0-60 sec -01 (n) copper control cable wire of of suitable for 25 HP starter (o) Single phase preventer (p) Digital Amp meter 04 Nos (q) Digital volt meter 01 Nos Note :- The rates quoted by the contactor shall include cost of any other spare parts/relay/timer and not mentioned herein but essentially required for functioning of the system. No extra payments will be made for the same.

Disconnecting and removing old u/s panel and fabrication, installing and commissioning starter panel cubical indoor type made out of 2 mm thick CRCA sheet for door, covers and sheet shrouds and partitions shall be minimum 1.6 mm dust and vermin proof, front opening with locking arrangement suitable to accommodate 03 Nos Star delta Starters( Motor 1, Motor 2 and 01 s/by) Star delta Starters complete with relays, contactors,timers, set of CTs for metering and protections and energy analyser to indicate current, phase and line voltage, provision for overload, short circuit, restricted earth fault, under frequency , control cabling from starter panel to pump motor and elsewhere, including cable gland, lugs etc , all complete and inter locking including the following :- (a) MCCB 4 pole, 35 KA , 160 A, with thermal magnetic setting -01 Nos (b) Aluminium colour coded/insulated bus bar 300 Amps capacity -04 Nos (c) MCCB 4 pole, 25 KA 63 A, -03 Nos (d) 3 Pole power contactor AC-3 suitable for 15 HP starter -09 Nos (e) Start/stop push button switch (f) Thermal over and under voltage relays (g) CTs of 150/5A -01 set of 3 (h) Auto phase sequence corrector of 160 Amp, 415 volts, 3 phase -01 Nos (j) Indicating lamps LED for load on mains and load on sets (k) MCBs for instruments (l) Onload changeover switch 160 A, 415volts, 3 phase open execution type-01 Nos (m) Star delta timer 0-60 sec -01 (n) copper control cable wire of of suitable for 15 HP starter 3 Nos (o) Single phase preventer (p) Digital Amp meter 04 Nos (q) Digital volt meter 01 Nos Note :- The rates quoted by the contactor shall include cost of any other spare parts/relay/timer and not mentioned herein but essentially required for functioning of the system. No extra payments will be made for the same.

Material and labour for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level, the earth plate surrended by a mixture of charcoal dust and salt to a packed thickness 150mm on all sides with and including necessary excavation earth work, returning filling in and removal of surplus soil upto 50 mtrs including galvanized iron strip 25 x 4 mm as earthing lead by mean of nut/bolt and washer of galvanized iron or steel drawn through 40 mm dia light grade GI pipe light grade with all fittings as shown in electrical plate no 3 of SSR part I of 2009 including GI pipe 20mm dia light grade for watering PCC chamber with PCC cover in cement concrete 1:2:4 Type B1(20mm graded aggregate), funnel, wire mesh, etc, connected to panel board as indicated including testing complete all as spd & directed

Excavation of hard / dense soil in trenches not exc 1.5 meter wide & not exc 1.5 mtr in depth: for foundationetc or for manholes, laying of pipe in any type of soil and getting out complete all as specified and dir

Excavating of disintegrated soil in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for under ground cable etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out of disintegrated rock complete all as specified and dir

Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and dir

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and dir

M & L for dry sand cushioning to underground cables with 8cm thick before laying of cables and 15cm thick after laying and stretching of cable all as specified and directed

M & L for Old size sub class ‘B’ bricks, laid in trenches as cable covers complete .

M & L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass complete all as specified and dir

M & L for Cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundations, filling and mass concrete completeall as specified and dir

M & L for cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in copings to poles & the like, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as dir

Supply , laying & testing in repair for XLPE insulated, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, laid in trenches, sleeving through pipes or fixed on poles & walls or laid under floors including jointing with suitable size aluminium lugs complete of size 16 Sqmm nominal cross section x 2 core all as specified and dir

All as per item no. 162 but Size 25 Sqmm X 3.5 core

All as per item no. 162 but Size 35 Sqmm X 3.5 core

All as per item no. 162 but Size 70 Sqmm X 3.5 core

All as per item no. 162 but Size 95 Sqmm X 3.5 core

All as per item no. 162 but Size 120 Sqmm X3.5 core

All as per item no. 162 but Size 240 Sqmm X3.5 core

Supply and fixing of GI tubing, light grade, 40 mm bore with all fitting lais in trenches / pole / wall for protection of cables in repairs complete all as specified and dir

Supply and fixing of GI tubing, light grade, 80 mm bore with all fitting lais in trenches / pole / wall for protection of cables in repairs complete all as specified and dir

Supply and fixing of GI tubing, light grade, 100 mm bore with all fitting lais in trenches / pole / wall for protection of cables in repairs complete all as specified and dir

Supply and fix in repair cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material of tubular sleeve version and accessories suitable for 3½/ 4 core XLPE armoured Al conductor cable of size 25 to 50 sq mm complete . Make- Recmay / Densal or equivalent .

Supply and fix in repair cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material of tubular sleeve version and accessories suitable for 3½/ 4 core XLPE armoured Al conductor cable of size 70 to 150 sq mm complete .Make- Recmay / Densal or equivalent .

Supply and fix in repair cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material of tubular sleeve version and accessories suitable for 3½/ 4 core XLPE armoured Al conductor cable of size 185 to 300 sq mm complete .Make- Recmay / Densal or equivalent .

Supply and fixing steel tubular pole, swaged, complete with cast iron base plate, finial taper plug, bolts, nuts, washer and screws including painting with two coats of aluminium paint over one coat of red oxide primer on all exposed surfaces and tarring with black bituminous paints to portion embedded in PCC including numbering of poles with two coats of synthetic enamel paints, type 410-SP-31 (9 meter long) complete, Including disconnecting and taking out old damage PCC pole all as directed .

Supply and fixing prestressed concrete pole 9 meters long 102 mm x 152 mm at top and 102 mm x 289 mm at bottom of class 10 complete, Including disconnecting and taking out old damage PCC pole all as spd & directed . Note for item no - 175 & 175 Earth work and PCC shall be measured and paid separately

Supply and stringing ACSR conductor of any size from LT over head line as directed including fixing to insulators with proper size of binding wire complete.Including dismantling and taking out worn out ACSR conductor from overhead electric line complete all as spd and dir

Supply and fixing mild steel galvanised stay assembly set complete comprising of 14mm dia, 400mm long stay bow, 2150mm long stay rod 20mm dia, 300mm x 300mm x 6mm stay plate, thimble, GI stay wire of 7/8 SWG upto required length including Loop type insulator of vitreous porcelain, small size with overall dimensions 65x90mm, clearance of hole 16mm, all as shown in electrical plate No.1 of MES Schedule part-I 2010 complete including dismantling and taking out old damaged stay complete all as directed. Note-PCC, earth work, and loop type insulator shall be measured and paid separately.

Supply and fixing Lightning arrestor suitable for LT 1100 volt, non liner resistor type, horn gap and chocking coil with all fitting for outdoor use, Including Disconnecting and taking out existing unserviceable lightening arrestor complete all as dir

M & L for Cross arms, bracing, supports, clamps and back plate, fabricated from structural steel section including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as directed including two coats of synthetic enamel paint over a coat of red oxide primer, complete all as directed .Dismantling and taking out damage/rusted cross arms, bracings, supports, clamps and back plates from existing poles / dismantled poles / pole structures complete all as directed .

S&F Danger notice plate of 1.6mm thick mild steel sheet vitreous enameled white with letter figures and conventional skull and bones in signal red colour and fix with MS clamp for LT size 20 X 15 Cm fix in repairs complete all as specified and dir

M& L Pin type, porcelain, vitreous, white, brown or green insulator, 100mm height, 65 mm dia for 1100 volts grade including one galvanised mild steel spindle, two galvanised iron washer and one galvanised iron nut, fixed in repairs complete all as dir

M&L for Shackle type insulator from LT overhead line and S&F new Shackle type, porcelain, vitreous, white, brown or green insulators 100mm dia and 115 mm height for working pressure 1100 volts including galvanised mild steel strap 31 x 3mm size, washers, 14mm dia insulator bolts, washers & nuts , fixed in repairs complete all as dir

M& L loop type, porcelain, vitreous, white, brown or green insulator, 65 x 90 mm , clearence of hole 16 mm for 1100 volts grade including fixed in repairs complete all as dir

M&L for vice type connectors of size 4 to 7 mm dia consisting of two brass plates and two steel bolts and nuts for two conductor of equal or unequal sizes for non tension connections including treatment of connector and ACSR conductor with conducting jelly , fixed in repairs complete all as dir

M&L for vice type connectors of size 10 to 13 mm dia consisting of two brass plates and two steel bolts and nuts for two conductor of equal or unequal sizes for non tension connections including treatment of connector and ACSR conductor with conducting jelly , fixed in repairs complete all as dir

M&L for Synthetic insulating rubber mat of size 2 m x 1m x 12 mm with ISI mark suitable for 1.1 KV rating in red colour complete all as specified and directed .

Supply and fix ON load four pole changeover switch with side handle of 4 pole 415 volt 50 Hz 630 amps in SS Enclosure and Conforming to IS/IEC : 60947-1 & 3 complete all as directed . Make - HPL , Cat no -ICAS0630 Or equivalent Make of L & T / ABB .

Supply and fix ON load four pole changeover switch with side handle of 4 pole 415 volt 50 Hz 400 amps in SS Enclosure and Conforming to IS/IEC : 60947-1 & 3 complete all as directed . Make - HPL , Cat no -ICAS0400 Or equivalent Make of L & T / ABB .

Supply and fix ON load four pole changeover switch with side handle of 4 pole 415 volt 50 Hz 200 amps in SS Enclosure and Conforming to IS/IEC : 60947-1 & 3 complete all as directed . Make - HPL , Cat no -ICAS0630 Or equivalent Make of L & T / ABB .

Supply and fix ON load four pole changeover switch with side handle of 4 pole 415 volt 50 Hz 100 amps in SS Enclosure and Conforming to IS/IEC : 60947-1 & 3 complete all as directed . Make - HPL , Cat no -ITAS0100 Or equivalent Make of L & T / ABB .

Supply and fix ON load four pole changeover switch Open execution of 4 pole 415 volt 50 Hz 630 amps and Conforming to IS/IEC : 60947-1 & 3 complete all as directed . Make - HPL , Cat no -ICAE0630 Or equivalent Make of L & T / ABB .

Supply and fix ON load four pole changeover switch Open execution of 4 pole 415 volt 50 Hz 400 amps and Conforming to IS/IEC : 60947-1 & 3 complete all as directed . Make - HPL , Cat no -ICAE0400 Or equivalent Make of L & T / ABB .

Supply and fix ON load four pole changeover switch Open execution of 4 pole 415 volt 50 Hz 200 amps and Conforming to IS/IEC : 60947-1 & 3 complete all as directed . Make - HPL , Cat no -ICAE0200 Or equivalent Make of L & T / ABB .

Supply and fix ON load four pole changeover switch Open execution of 4 pole 415 volt 50 Hz 100 amps and Conforming to IS/IEC : 60947-1 & 3 complete all as directed . Make - HPL , Cat no -ITAE0100 Or equivalent Make of L & T / ABB .

M & L for Painting of steel pole with cross arms, clamp of any length and shape for LT overhead line with single coat of aluminium paint including preparation of the existing surface including marking pole numbers in a 20 cm dia yellow circle & marking six black & four yellow bends width 15 cm by fluorescent paint, from bottom of pole to 1.5 Mtr height and providng three nos of Red ,Yellow & Blue of reflecting strip of 25 mm width adhesive PVC tape around the pole at suitable height complete all as specified and directed.

M & L for Restraining of LT over head line single ACSR conductor comprising of any size of conductor aluminium/copper/GI after opening binding wire from insulators and replace binding wire and achieved permissible sag limit of over head line conductor complete all as directed and specified and dir Note- Rate quoted by the contractor shall be deemed to include for cutting/trimming of tree branches wherever touching the over headline around one metre clear of over head line and removing trimmed branches as directed. Nothing extra shall be paid on this account.

Supply and laying of back feel compound in earth pit complete all as specified and directed . Make - S N Engineering or Equivalent .

Supply & Fixing in repair including making connection testing and commissioning of new MCCB 4 Pole, 415 V, micro processor based 1000 Amps with breaking capacity 50 KA all as dir Note: The make of MCCB shall be L &T , GE , C & S or any other make as per the make in the existing plannel board or exactly suitable to the existing frame size. In case only one particular make is procuring by the bidder necceasry alteration required to fix the same at no extra cost shall be done by the bidder .

M & L for Earthing to OH/Sub stn with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to main earth lead GI wire 4 mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 1991, GI earth lead wire protected by GI pipe 15mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete all as directed Note : Main earth lead beyond 7.5 meter shall measured and paid saperatly.

. ------ditto----- all as per above item no - 200 but main earth lead 32 x 6 mm galvanised iron strip.

M & L in repair for Earth continuity conductor or main earthing lead of 4 mm dia galvanized iron or steel wire, buried in ground or fixed to wall in repair complete all as dir

M & L in repair for Earth continuity conductor or main earthing lead of 32 x 6 mm galvanized iron strip, buried in ground or fixed to wall in repair complete all as dir

Trimming of tree branches upto 11m height from ground level all along the over head electric supply lines, to clear all branches maintaining a clear distance of 1.5m from the conductors. The maximum average dia of branches shall not exceed 20cm. After trimming the cut pieces and branches are cleared from the road upto a distance 200m. Note: (a) Required tools, ladder, Safety equipment etc. shall be arranged by the firm. (b) Area wise shut down to feeders shall be given on one day notice upto 4hrs.

M&L in repair for LT line PVC Spacers spiral type for the following :-

Spacer for two wire

Spacer for three wire

Spacer for four wire

Spacer for five wire

Supply only Aluminium lugs of any type complete all as per of sample of following sizes :-

Disconnecting and taking down existing security light / flood light fitting of any make or any capacity for repairs or replacement of burnt / worn out accessories (surge protector , driver ,cable etc) through ladder / motorised / manual system from GI breaket on pole of any size and refixing the same after cleaning, general overhauling ,repairing and making serviceable and refixed the same after making serviceable and testing complete all as directed Note :- The new consume item will be measured and paid seperetly as under below :-

Supply only driver of any make or any model on existing LED street light luminaries of wattage 45 to 120 watt for LED street light fitting complete Make- Havells / CG /Bajaj.

Supply only driver of any make or any model on existing LED flood light luminaries of wattage 60 to 80 watt for LED street light fitting complete Make- Havells / CG /Bajaj.

Supply only surge protector of any make or any model on existing LED street light luminaries of wattage 45 to 120 watt for LED street light fitting complete Make- Havells / CG /Bajaj.

Supply and fixing two single core cable with copper condutors of size 2.5 sqmm and drawing in to existing GI pipe / PVC Conduit bracket and fixed with street light fitting complete all as directed

M&L in repair for Rigid non metallic PVC conduit ISI marked, medium grade of 25 mm external dia, fixed on Pole inclusive of all fitting accessories complete and making good disturbed surfaces in repairs all as directed.

Supply and fixing Street light brackets made out of GI tubing, light grade, 40mm bore 1200 mm Long bent to shape at 120 degree, fixed on pole by providing MS clamp made up of flat iron 50x6 mm including bolts nuts and washer of suitable size, fixed in repairs complete all as dir

Taking down high mast fitting from high mast structure throgh motorised system and checking the all fittings including cleaning the steel rope and repair as required .(Cost of acessories such as Driver , Surge protector etc shall be mesured & paid in respective items)

Supply and fixing high efficacy energy saving IP 66 protection dia cast aluminium roadway luminaire with high power LED light of 45 Watt and making connections with provision of twin core twisted copper wire 23/0.0076 up to 1.5 mtr length compleate. MAKE:- Havells , Cat No- ENDURAPEARLNEOSL45WLED757PASYTOPC or equivalent Make of Wipro /Bajaj / Philips .

Supply and fixing high efficacy energy saving IP 66 protection dia cast aluminium roadway luminaire with high power LED light of 60 Watt and making connections with provision of twin core twisted copper wire 23/0.0076 up to 1.5 mtr length compleate. MAKE:- Havells , Cat No- ENDURAPEARLNEOSL60WLED757PASYTOPC or equivalent Make of Wipro /Bajaj / Philips .

Supply and fixing high efficacy energy saving IP 66 protection dia cast aluminium roadway luminaire with high power LED light of 80 Watt and making connections with provision of twin core twisted copper wire 23/0.0076 up to 1.5 mtr length compleate. MAKE:- Havells , Cat No- ENDURACITYLINERNEOMPSL80WLED757PASYBOTG or equivalent Make of Wipro /Bajaj / Philips .

Supply and fixing high efficacy energy saving IP 66 protection dia cast aluminium roadway luminaire with high power LED light of 120 Watt and making connections with provision of twin core twisted copper wire 23/0.0076 up to 1.5 mtr length compleate. MAKE:- Havells , Cat No- ENDURAPEARLMAGSL120WLED757PASYTOTGASTHO or equivalent Make of Wipro /Bajaj / Philips .

Supply and fixing high efficacy energy saving IP 66 protection dia cast aluminium roadway luminaire with high power LED flood light of 120 Watt and making connections with provision of twin core twisted copper wire 23/0.0076 up to 1.5 mtr length compleate. MAKE:- Havells , Cat No- JETAIRISFLS120WLED757SYMLTG or equivalent Make of Wipro /Bajaj / Philips .

Supply & Fixing in repair including making connection testing and commissioning of new MCCB 3 Pole, 415 V, fixed type, 25 to 100 Amps with breaking capacity 16 KA. Note: The make of MCCB shall be L &T , GE , Hawells, Strandard, crompton, C & S or any other make as per the make in the existing plannel board or exactly suitable to the existing frame size. In case only one particular make is procuring by the bidder necceasry alteration required to fix the same at no extra cost shall be done by the bidder .

Ditto, but MCCB TP 160 Amps, 36 KA with Adjustable thermal setting ( 80 to 100 %) complete.

Ditto, but MCCB TP 250 Amps, 36 KA with Adjustable thermal setting ( 80 to 100 %) complete.

Ditto, but MCCB TP 400 Amps, 36 KA with Adjustable thermal setting ( 80 to 100 %) complete.

Ditto, but MCCB TP 630 Amps, 50 KA with Adjustable thermal setting ( 80 to 100 %) complete.

Ditto, but 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA.

Ditto, but 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA.

Ditto, but 4 Pole, 415 V, Adjustable type, 400 Amps with breaking capacity 36 KA.

Ditto, but 4 Pole, 415 V, Adjustable type, 630 Amps with breaking capacity 36 50.

Supply and fixing in repair for three phase Amp meter Size 96 mm x 96mm square flush type and analog type capacity including taking out defective existing Amp meter complete all as directed .

S/F in replace Indication lamp (RYB) LED type with toggle switch & control fuses complete all as directed .

S/F in repair for three phase Volt metert digital type of range 0- 500V complete all as directed.

M&L for replacement of CT for ratio (50 /5 , 100/5/200/5 as per existing complete all as specified and directed.

Supply and fixing in repair for swich disconnectore fuse unit in sheet steel enclosure TPN current rating 200 Amp with HRC Fuse including disconnecting and taking out U/S Main switch complete all as directed. Make Satnderd

Supply and fixing in repair for swich disconnectore fuse unit in sheet steel enclosure TPN current rating 100 Amp with HRC Fuse including disconnecting and taking out U/S Main switch complete all as directed . Make Satnderd

M & L for PVC insulated, stranded aluminium conductor served with inner sheathing PVC tape and over all PVC sheathed in service connection suspended by insulating hanger not more than 1 meter apart including 4 mm dia GI suspension wire , two single core cable of 10 Sqmm , complete all as specified and directed by Engr-In-Charge.Makes of cable : Finolex/Indo -Asian/Standard .

s & F in repair of PVC SMC boxes with hinged door fixing of size 333mmx233mmx120mm with MS clamp made to shape with necessary nut bolts and washers complete comprising of aluminium busbar 100 amps capacity of suitable size mounted over porcelain insulator with nut bolts & washers including MCB E amps and making incoming and outgoing connection by taking out loops of cable of any size incl necessary excavations and other civil works complete all specified and directed .

M & L Air termination of Lighting conductors, single pointed aluminium rod 12mm dia and 300mm long complete all as specified and directed .

M & L Air termination, single pointed, copper rod 12mm dia and 300mm long complete all as specified and directed .

M & L Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed .

M & L for Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed .

M & L for copper strip 20 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed.

Supply and fix in repair three phase 25 KW ( 63 amps ) timer switch with SMC elcosure and 3 nos. power contactors , 3 nos incoming MCBs & 3 nos outgoing MCBs . Including dismantling and taking out warn out timer complete . Make- Nature switches . Cat No.- SWADEEP-02EC25kW3p or equivalent Make .

D P ENTERPRISES

akhil enterprises

Ish Engineers and Contractors

M/S Anand Enterprises