Construction of Balance 27.70 m Length Compound Wall for the work of Construction of 15 MIG Flats in Pudukkottai District under SFS Phase II as per Revised Site plan

Amount

Earth Work Excavation. Heading

Earth Work excavation for foundation in all soils and sub soils to the required depth as may be directed except in hard rock requiring blasting, inclusive of shoring, strutting and bailing out water wherever necessary and depositing the earth in places shown clearing and levelling the site with an initial lead of 10 meters and lift as specified hereunder etc., complete in all respects complying with relevant standard specifications. (Including Refilling).

Supplying and filling in foundation and basement with filling Stone Dust in layers of 150mm thickness well watered rammed and consolidated complying with relevant standard specifications including cost of filling sand as directed by the Departmental officers.

Refilling in foundation and basement and other similar works with excavated earth in layers of 150mm thickness well watered rammed and consolidated etc all complete complying with relevant standard specifications and as directed by the Departmental officers.

Cement Concrete 1:5:10 (One of Cement, Five of M.sand and Ten of hard broken stone jelly) for foundation and flooring using 40mm size hard broken stone jelly inclusive of shoring, strutting, baling out water wherever necessary ramming, curing etc., complete in all respect complying with relevant standard specifications and as directed by the departmental officers.

Cement Concrete 1:1 1/2:3 (One of cement, One and half of M.sand and Three of Hard broken stone jelly) for all RCC works namely Tee, Ell-rectangular beams, lintel, parapet cum drops, waist and landing slab, canophy, circular column, fin projections, sunshades, window boxing slab, loft and other similar works using 20mm gauge hard broken stone jelly excluding the cost and fabrication of reinforcement grills, shuttering and centering but including vibrating, laying, curing and finishing etc., complying with relevant standard specifications and as directed by the Departmental Officers in the following floors.

Brick Work in Cement Mortor 1:5 (One of Cement and Five of M.sand) using kiln burnt third class country bricks of size 220 x 110 x 70 mm having minimum average crushing strength of 50 Kg / Sq.cm in foundation & basement including dewatering wherever necessary proper setting curing etc., complete in all respects complying with relevant standard specifications and as directed by the departmental officers.

Brick Partition In C:M 1:4, 115mm thick using kiln burnt third class country bricks of size 220 x 110 x 70 mm having crushing strength of 50 Kg/Sq.cm wherever necessary proper setting curing etc., complete in all respects complying with relevant standard specifications and drawings and as directed by the departmental officers.

Supply and erecting, centering for sides and sofits including supports and strutting up to 3.29 mt. high for plane surfaces such as RCC slabs, rectangular beams, Tee (or) Ell beams, lintels, Bed Blocks, slabs, landing beam, canopy side slab or boxing or vertical slabs, rectangular or square or round columns etc., as detailed below with all cross bracings using MS sheets of size 90cm x 60cm and BG 10 stiffened with welded MS angles of size 25mm x 25mm x 3mm for boarding laid over silver oak or country wood joist of size 10cm x 6.5cm spaced at about 90cm centre to centre and supported by casurina props 10cm to 13cm dia. spaced about 75cm center to centre or at nsuitable intervals etc., complete complying with standard apecification and as directed by the Departmental officers.

Providing form work for R.C.C slab, beam etc., complete in all respect complying with relevant standard specifications and as directed by the departmental officers.

Providing form work IN SMALL QUANTITY etc., complete in all respect complying with relevant standard specifications and as directed by the departmental officers. (Column, Sunshade).

Supplying, fabricating and placing in position of Mild Steel / Ribbed Tor steel for reinforcement for all RCC works in all floors including the cost of binding wire, bending, tying and applying one coat of Cement Slurry etc., complete in all respects and as directed by the departmental officers.

Plastering with Cement Mortar 1:5 (One of Cement and Five of P.sand) 12mm thick finished with neat cement including, providing band cornice scaffolding curing etc., complete complying with relevant standard specification and as directed by the departmental officer.

Painting the New Walls two coats with best approved quality weather shield exterior emulsion paint over one coat of primer including cost of brushes, emulsion paints scaffolding curing etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers. (The quality and shade of paint should be got approved by the Competent Authority before use).

Supplying and laying of colour hydrualically pressed Rubber mould concrete interlocking blocks of 85mm thickness of approved make with rubber moulded including cost of conveyance of interlocking blocks and consolidating, vibrating labour charges for laying to proper level slopes etc., and as dericted by departmental officers.

Sub Total

GST at 18%

V A RAMACHANDRAN