SPL REPAIR TO JCO/OR LIVING, TOILET AND BATHROOM (PUF SH 894 and 891) AT GE (P) AND SPECIAL REPAIR TO PUF SH NO 985 OR LIVING ACCN AND PUF SH 987 AND 988 (TOILET BLOCK 02 NOS) AT PMS (2nd Call)

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the primises complete all as specified and directed.

Demolition of cement concrete in ground floor & paving n. exc 15 cm thick (below or above GL) unreinforced complete all as specified and directed.

M&L TMT mild steel bars 6-8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9 mm `dia or securing with clips quality conforming to complete all as specified and directed.

M&L for 75mm cement concrete (nominal mix) 1:2:4 type B1 using 20 mm graded aggregates as in floors, pavings complete all as specified and directed.

M&L for 100 mm thick PCC 1:2:4, type B1, (using 20 mm graded crushed stone) , as in sub base for receiving floor finish with nominal reinforcement all as specified and directed. Reinforcement will be measured and paid seperately.

M&L Non Skid white ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.36sqm but not exceeding 0.54 sqm in floors etc. set and jointed in neat cement slurry and pointed in white cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in CM 1:6 complete all as specified and directed.

M&L non skid ceramic coloured tiles 7mm to 8mm thick, light shade (square or rectangular) area of each tile exc 0.42 Sqm but n. exc 1.00 sqm in floors etc , over & including 15 mm thick cement mortar (1:6) screed etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L Machine cut kota stone slab flooring 18mm thick over cement screed laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

M&L for 16 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.® complete all as specified and directed.

M&L for 75 mm thick cement concrete M10 (Nominal Mix) with 40mm graded crushed aggregate finished even and fair laid to a slope of 1 in 12, laid in alternate bays, each bay not exceeding 3 m length with joint filled with bituminous mastic filling comprising a mixture of 1 part of heated Industrial bitumen 85/25 grade and two parts of heated sand as in plinth protection complete all as specified